High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Features: * * * * * * * Ceramic Package Designed for non-contact switching operations Operates over a broad range of supply voltages Excellent temperature stability operates in harsh environments Suitable for military and space applications Processing patterned after class B or S of MIL-STD-883 Through Hole 0.40" [10.16 mm] lead length minimum Surface Mount 0.125" [3.18 mm] lead length SMD Through Hole Description: These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic(R) silicon chip. Included on-chip is a bandgap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over 200 kHz. The Uni-Polar turns on with a (logic level "0") after a sufficient magnetic field from the south pole of a magnet approaches the symbolized face of the device (operating point) and turns off (logic level "1") after the magnetic field reaches a minimum value. The Bi-Polar device turns on (logic level "0") in the presence of a magnetic south pole and turns off (logic level "1") when subjected to a magnetic north pole. Both magnetic poles are necessary for operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-contact switching operations, brushless DC motors and for use with multiple pole magnets. B and S devices are processed to OPTEK's military screening program patterned after MIL-STD-883. This product has passed Radiation Hardness testing up to 350 Krad (si) per MIL-STD-883 method 1019.6 and up to 100 Krad (si) for ELDRS. Contact your local representative or OPTEK for more information. Applications: * * * Non-contact switching operations Brushless DC motors Multiple pole magnets * * * Non-contact reflective object sensor Assembly line automation Machine automation * * * Machine safety End of travel sensor Door sensor VCC 1 Vcc Voltage Regulator Hall Element Magnet on this Side Output Output 3 Ground 2 Ground Pin # Description 1 VCC 2 Ground 3 Output Lead finish = Solder Dipped (Sn 63/37) DIMENSIONS ARE IN: [MILLIMETERS] INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C.1 07/08 Page 1 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Supply Voltage, VCC 25 V Storage Temperature Range, TS -65C to +150C Operating Temperature Range, TA -55C to +125C 260C(1) Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 seconds with soldering iron) 25 mA Output ON Current, ISINK Output OFF Voltage, VOUT 25 V Magnetic Flux Density, B Unlimited Notes: (1) Heat sink leads during hand soldering. Hi-Reliability Hallogic(R) Sensor Part Number OMH090B OMH090S OMH3019B OMH3019S Operate Point Gauss Min / Typ / Max Release Point Gauss Min / Typ / Max Hysteresis Gauss Min / Typ / Max 50/90/180 30 / 60 / 160 5 / 30 / 70 175 / 420 / 500 125 / 220 / 420 30 / 100 / 155 70 / 220 / 350 50 / 165 / 330 15 / 55 / 200 VCC (Volts) Min / Max Package Uni-Polar Non-Latching OMH3020B OMH3020S Through Hole OMH3040B OMH3040S OMH3075B OMH3075S 70 / 150 / 200 50 / 115 / 180 110 / 35 / 60 50 / 150 / 250 -250 / -150 / -50 100 / 300 / 500 20 / 60 / 95 10 / 45 / 85 5 / 15 / 40 Bi-Polar Latching OMH3131B OMH3131S 4.5 / 24.0 OMH090B-SM OMH090S-SM OMH3019B-SM OMH3019S-SM OMH3020B-SM OMH3040S-SM OMH3075B-SM OMH3131S-SM 5 / 30 / 70 175 / 420 / 500 125 / 220 / 420 30 / 100 / 155 70 / 220 / 350 50 / 165 / 330 15 / 55 / 200 SMD OMH3040B-SM OMH3131B-SM 30 / 60 / 160 Uni-Polar Non-Latching OMH3020S-SM OMH3075S-SM 50/90/180 70 / 150 / 200 50 / 115 / 180 110 / 35 / 60 50 / 150 / 250 -250 / -150 / -50 100 / 300 / 500 20 / 60 / 95 10 / 45 / 85 5 / 15 / 40 Bi-Polar Latching OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C.1 07/08 Page 2 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH090, OMH090B, OMH090S Uni-Polar SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS BOP Magnetic Operate Point(1) 45 70 20 90 - 210 200 180 -55C Gauss +25C +125C BRP Magnetic Release Point 30 25 65 - 180 170 Gauss -55C & +25C +125C BH Magnetic Hysteresis 5 5 - 95 70 Gauss -55C +25C & +125C ICC Supply Current - 5 - 9 11 5 mA -55C,VCC = 24 V, Output On, B250 Gauss +25 +125C VOL Output Saturation Voltage - 125 300 400 mV -55C,VCC = 4.5 V, IOL = 30 mA,B250 Gauss +25C & +125C IOH Output Leakage Current - 0.50 - 10 11 12 A -55C,VCC = 24 V, VOUT =24 V, B250 Gauss +25 +125C tr Output Rise Time - 0.13 1.00 s tf Output Fall Time - 0.14 1.00 s RL = 820 , CL = 20 pF, VCC = 14 V (guaranteed not tested) Electrical Characteristics (Vcc = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH3019, OMH3019B, OMH3019S Uni-Polar SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS BOP Magnetic Operate Point(1) 175 - 300 - 500 575 Gauss +25C -55C & +125C BRP Magnetic Release Point 125 100 235 - 420 - Gauss +25C -55C & +125C BH Magnetic Hysteresis 30 20 65 - 155 - Gauss +25C -55C to +125C ICC Supply Current - 5 9 mA VCC = 24 V, Output On, B 50 Gauss VOL Output Saturation Voltage - 125 300 mV VCC = 4.5 V, IOL = 15 mA, B 500 Gauss IOH Output Leakage Current - 0.10 1.0 A VCC = 24 V, VOUT = 24 V, B < 50 Gauss tr Output Rise Time - 0.13 1 s tf Output Fall Time - 0.14 1 s RL = 460 , CL = 20 pF, VCC = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C.1 07/08 Page 3 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH3020, OMH3020B, OMH3020S Uni-Polar SYMBOL BOP BRP PARAMETER Magnetic Operate Point(1) Magnetic Release Point MIN TYP MAX UNITS TEST CONDITIONS - 230 - 350 425 Gauss +25C -55C & +125C 50 25 180 - - Gauss +25C -55C & +125C 10 10 50 - - Gauss +25C -55C & +125C BH Magnetic Hysteresis Icc Supply Current - 4 7 mA VCC = 24 V, Output On, B 50 Gauss VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 15 mA, B 350 Gauss IOH Output Leakage Current - 0.10 10 A VCC = 24 V, VOUT = 24 V, B 50 Gauss tr Output Rise Time - 0.21 1 s tf Output Fall Time - 0.10 1 s RL = 820 , CL = 20 pF, VCC = 12 V (guaranteed not tested) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH3040, OMH3040B, OMH3040S Uni-Polar SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS BOP Magnetic Operate Point(1) 70 75 150 - 200 270 Gauss +25C -55C & +125C BRP Magnetic Release Point 50 25 115 - 180 210 Gauss +25C -55C & +125C BH Magnetic Hysteresis 20 20 35 - - Gauss +25C -55C & +125C Icc Supply Current - 4 - 7 8 mA +25C, VCC = 24 V, Output On, B 250 Gauss -55C & +125C VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 20 mA, B 250 Gauss IOH Output Leakage Current - 0.10 - 11 10 12 A -55C +25C, VCC = 24V, VOUT = 24V, B 250 Gauss +125C tr Output Rise Time - 0.21 1 s tf Output Fall Time - 0.10 1 s RL = 820 , CL = 20 pF, VCC = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C.1 07/08 Page 4 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH3075, OMH3075B, OMH3075S Bi-Polar Latching SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 50 25 150 - 250 275 Gauss +25C -55C & +125C BOP Magnetic Operate Point(1) BRP Magnetic Release Point -250 -275 -150 - -50 -25 Gauss +25C -55C & +125C BH Magnetic Hysteresis 100 50 200 - 500 - Gauss +25C -55C & +125C ICC Supply Current - 4 - 7 8 mA +25C, VCC = 24 V, Output On, B 250 Gauss -55C & +125C VOL Output Saturation Voltage - 100 - 500 400 400 mV -55C +25C, VCC = 4.5 V, IOL = 20 mA, B 250 Gauss +125C IOH Output Leakage Current - 0.10 1.0 A VCC= 24 V, VOUT = 24 V, B 250 Gauss tr Output Rise Time - 0.21 1 s tf Output Fall Time - 0.10 1 s RL = 820 , CL = 20 pF, Vcc = 12 V (guaranteed not tested) Electrical Characteristics (VCC = 4.5 V to 24 V, TA = 25 C unless otherwise noted) OMH3131, OMH3131B & OMS3131S Uni-Polar SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS BOP Magnetic Operate Point(1) 20 10 - 95 150 Gauss +25C -55C to +125C BRP Magnetic Release Point 10 5 - 85 145 Gauss +25C -55C to +125C BH Magnetic Hysteresis 5 5 - 40 145 Gauss +25C -55C to +125C ICC Supply Current - 4 7 mA VCC = 24 V, Output On, B > 250 Gauss VOL Output Saturation Voltage - 100 400 mV VCC = 4.5 V, IOL = 15 mA, B 250 Gauss IOH Output Leakage Current - 0.10 10 A VCC = 24 V, VOUT = 24 V, B 0 Gauss tr Output Rise Time - 0.21 1 s tf Output Fall Time - 0.10 1 s RL = 820 , CL = 20 pF, Vcc = 12 V (guaranteed not tested) Notes: (1) South pole facing symbolized surface. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C.1 07/08 Page 5 of 7 High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S) Magnetic Operate & Release Points vs Temperature 180 160 OMH3040 Operate Manetic Flux Level - Gauss 140 OMH3040 Release 120 100 OMH090 Operate 80 OMH090 Release 60 OMH3131 Operate 40 20 OMH3131 Release 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 Temperature (C) Magnetic Operate & Release Points vs Temperature 400 OMH3019 Operate 300 Manetic Flux Level - Gauss OMH3019 OMH3020 Operate 200 OMH3020 Release OMH3075 Operate 100 0 -100 OMH3075 Release -200 -60 -40 -20 0 20 40 60 80 100 120 140 160 Temperature (C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C.1 07/08 Page 6 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Hallogic Hall-Effect Sensors OMH090 OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions) OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S) Rise and Fall Time vs Temperature 350 B OP 300 B RP 250 V OH 90% 90% Tf V OL Typical Time (ns) Magnetic Field Tr 10% 10% Vcc 1 820 Ohm U.U.T. Rise Time Fall Time 200 150 100 Output 3 20 pf 50 Ground 2 0 -40C 0C 40C 80C 120C 150C Temperature (C) ICC vs Temperature Saturation Voltage vs Temperature 0.40 9.0 8.0 Typical Saturation Voltage (V) 0.35 7.0 Icc ON (mA) Icc OFF (mA) Typical Icc (mA) 6.0 5.0 4.0 3.0 2.0 RL = 820 ohms 0.30 0.25 0.20 0.15 1.0 0.0 0.10 -40C 0C 40C 80C 120C 150C -40C 0C Temperature (C) 40C 80C 120C 150C Temperature (C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C.1 07/08 Page 7 of 7