GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant DESCRIPTION KEY FEATURES This series of devices meets RoHS requirements per EU Directive 2002/95/EC. Monolithic design for lowest parasitics Low Conversion Loss Suitable for applications to 26.5 GHz Excellent Noise Figure Available in low, medium and high barrier heights Can be supplied as monolithic devices for hybrid applications or as packaged devices www.MICROSEMI.com Schottky Barrier devices are currently available in single beamlead, dual "T", ring quad and bridge quad configurations. Devices are available in monolithic form for hybrid applications as well as in hermetic or non-hermetic packages. Monolithic devices are recommended for highest frequency, broadband designs. The beamlead design eliminates the problems associated with wire bonding very small junction devices thus improving reliability and performance in MIC applications. Our in house epitaxy process capability insures repeatability for lowest conversion loss through Ku Band. A broad range of unique metallization schemes produce Microsemi's complete line of barrier heights. Diodes are currently available with barrier heights as low as 240 mV and up to 625 mV per junction. By optimizing epitaxy and metallization, these devices achieve the lowest RS-CJ products resulting in exceptional conversion loss performance. "High Rel" screening is available on packaged devices per your requirements. 1 RoHS Compliant 1 APPLICATIONS Schottky barrier diodes are suitable for a variety of circuit applications ranging from single ended RF mixers to low level high speed switching. The monolithic beamlead design minimizes parasitic inductance and capacitance insuring repeatable performance through Ku band. Single junction devices such as the style `S12' are well suited for RF Mixers, level detectors, phase detectors, modulators, etc. With junction capacitances as low as .06 pF, Monolithic Quads are ideally suited for broadband double balanced mixer designs through 26.5 GHz. The Ultra-Low Barrier devices (GC9900 Series) are designed for mixers with low or starved Local Oscillator levels where optimal conversion loss is a must. High barrier diodes, (GC9940 Series) are designed for applications where high drive levels are available, such as, Doppler mixers or motion detection. Schottky diodes are available in UltraLow, Medium and High Drive levels to fit virtually any circuit requirement. These devices are supplied with Gold plated terminations. Consult factory for details. APPLICATIONS/BENEFITS Mixers Level Detectors Phase Detectors ABSOLUTE MAXIMUM RATINGS AT 25 C (UNLESS OTHERWISE SPECIFIED) 3B Rating Value Unit P 100 mW Storage Temperature TSTG -65 to +175 C Operating Temperature TOP -55 to +150 C Maximum Power Handling GC9901-GG9944 Symbol IMPORTANT: For the most current data, consult our web site: www.microsemi.com HU U Specifications are subject to change. Consult factory for latest information. These devices are ESD sensitive and must be handled use using ESD precautions. Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 1 GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant CHIP ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) . 1 Barrier Height GC9901 GC9902 GC9903 Freq Range X C (Max) 340 (Max) 20 (Typ) 6.5 (Typ) 0.15 310 16 6 0.30 300 14 5.5 CJ(pF)3 VF(mV) (Min) (Max) 0.10 IR=10A Ku-Ka ULTRA LOW @5 mA NFSSB 4 (db) ZIF()5 @1 mA RD() VB(V) 2 2.0 @0V GC9904 S 0.50 280 12 5.5 GC9911 Ku-Ka 0.10 360 20 6.5 GC9912 X 0.15 350 16 6 0.30 340 14 5.5 GC9913 LOW C 2.0 GC9914 S 0.50 330 12 5.5 GC9921 Ku-Ka 0.10 470 20 6.5 GC9922 GC9923 LOWMED X C 2.0 0.15 460 16 6 0.30 440 14 5.5 GC9924 S 0.50 420 12 5.5 GC9931 Ku-Ka 0.10 550 20 6.75 0.15 540 16 6.25 0.30 530 14 5.75 GC9932 GC9933 MEDIUM X C 3.0 GC9934 S 0.50 510 12 5.5 GC9941 Ku-Ka 0.10 660 20 7 0.15 640 16 6.25 0.30 630 14 5.75 0.50 610 12 5.75 GC9942 GC9943 GC9944 HIGH X C 4.0 S www.MICROSEMI.com Model Number 140 170 200 250 300 Notes 1. When ordering, specify appropriate package style. IE: Order GC9901-S12 for single beamlead configuration. 2. V b measured at 10A (N/A on ring quads). 3. 0 Volts, F=1 MHz (diagonal leads on quads). 4. L.O. = 0 dBm, Nif = 1.5 dB, F = 10 GHz 5. L.O. = 0 dBm ELECTRICALS Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 2 GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant VF CURVES TYPICAL NF CURVES 100 1 2 www.MICROSEMI.com Typical I-V Curves 3 4 IF(mA) 10 1 1-GC9902 2-GC9922 3-GC9932 4-GC9942 0.1 0.01 0 0.2 0.4 0.6 0.8 1 1.2 VF(V) TYPICAL IF IMPEDANCE CURVES GRAPHS Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 3 GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant PACKAGE STYLE UC PACKAGE STYLE S12 www.MICROSEMI.com Order as GC9900-UC PACKAGE STYLE TSR ORDER AS GC9900-TSR PACKAGE STYLE QR1 PACKAGE STYLE TCC ORDER AS GC9900-TCC Also available as TCA (`T' Common Anode) PACKAGE STYLE QB1 MECHANICAL ORDER AS GC9900-QR1 Order as GC9900-S12 ORDER AS GC9900-QB1 DISCRETE AND MONOLITHIC PACKAGE OPTIONS Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 4 GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant PACKAGE STYLE 128A PACKAGE STYLE 127B PACKAGE STYLE 128B PACKAGE STYLE 127C PACKAGE STYLE 128C www.MICROSEMI.com PACKAGE STYLE 127A MECHANICAL NON HERMETIC EPOXY COATED PACKAGES Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 5 GC9901 - GC9944 Schottky Barrier Diodes (R) TM For Mixers and Detectors RoHS Compliant STYLE 174B PACKAGE STYLE 129B STYLE 174C PACKAGE STYLE 129C ORDERING INFORMATION www.MICROSEMI.com PACKAGE STYLE 129A . Package style and configuration should be included when ordering 3 and 4 terminal products. Format: partnum - pkg - config MECHANICAL For example: Order a ring quad in a 128C package as: GC9901-128C-QR1 Order a bridge quad in a 128C package as: GC9901-128C-QB1 Consult Factory for assistance. OTHER PACKAGE STYLES AVAILABLE ON REQUEST Copyright 2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 6