SENSITRON
SEMICONDUCTOR
• 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
MBRD320
Technical Data
Data Sheet 3062, Rev. -
MBRD320 SCHOTTKY RECTIFIER
Applications:
• Switching power supply • Converters • Free-Wheeling diodes • Reverse battery protection
• Battery charging
Features:
• Popular D-PAK outline
• Small foot print, surface mountable
• Low forward voltage drop
• High frequency operation
• Guard ring for enhanced ruggedness and long term reliability
Mechanical Dimensions: In Inches / mm
D-PAK
SENSITRON
SEMICONDUCTOR
• 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
MBRD320
Technical Data
Data Sheet 3062, Rev. -
Maximum Ratings:
Characteristics Symbol Condition Max. Units
Peak Inverse Voltage VRWM -20 V
Max. Average Forward IF(AV)
Rated VR ,
50% duty cycle @TC = 125 °C,
rectangular wave form 3A
Peak Repetitive Forward
Current IFRM Rated VR , Square wave, 20KHz,
@TC = 125 °C 6A
Max. Peak One Cycle Non-
Repetitive Surge Current IFSM 8.3 ms, half Sine pulse 75 A
Peak Repetitive Reverse Surge
Current IRRM 2.0 µs, 1.0kHz 1.0 A
Electrical Characteristics:
Characteristics Symbol Condition Max. Units
Max. Forward Voltage Drop * VF1 @ 3 A, Pulse, TJ = 25 °C
@ 6 A, Pulse, TJ = 25 °C0.60
0.70 V
VF2 @ 3 A, Pulse, TJ = 125 °C
@ 6 A, Pulse, TJ = 125 °C0.45
0.625 V
Max. Reverse Current * IR1 @VR = rated VR
TJ = 25 °C0.2 mA
IR2 @VR = rated VR
TJ = 125 °C20 mA
Max. Voltage Rate of Change dv/dt -10,000 V/µs
* Pulse Width < 300µs, Duty Cycle <2%
Thermal-Mechanical Specifications:
Characteristics Symbol Condition Specification Units
Max. Junction Temperature TJ--65 to +150 °C
Max. Storage Temperature Tstg --65 to +175 °C
Maximum Thermal Resistance
Junction to Case RθJC DC operation 6°C/W
Maximum Thermal
Resistance Junction to Ambient RθJA -80 °C/W
Approximate Weight wt -0.3 g
Case Style D-PAK(Similar to TO-250AA)
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
