A STEP AHEAD
26
DT Family
Receptacle Backshells
Connector Style Strain
Relief
Tubing Size
(mm) P/N
DT04-2P 180° 6, 7.5, 8.5, and 10 1011-229-0205
180° X 6, 7.5, 8.5, and 10 1011-257-0205
90° 6, 7.5, 8.5, and 10 1011-230-0205
90° X 6, 7.5, 8.5, and 10 1011-258-0205
DT04-3P 180° 6, 7.5, 8.5, and 10 1011-233-0305
180° X 6, 7.5, 8.5, and 10 1011-261-0305
90° 6, 7.5, 8.5, and 10 1011-234-0305
90° X 6, 7.5, 8.5, and 10 1011-262-0305
DT04-4P 180° 6, 7.5, 8.5, and 10 1011-237-0405
180° X 6, 7.5, 8.5, and 10 1011-265-0405
90° 6, 7.5, 8.5, and 10 1011-238-0405
90° X 6, 7.5, 8.5, and 10 1011-266-0405
DT04-6P 180° 8.5, 10, and 13 1011-241-0605
180° X 8.5, 10, and 13 1011-269-0605
90° 8.5, 10, and 13 1011-242-0605
90° X 8.5, 10, and 13 1011-270-0605
DT04-08P* 180° 8.5, 10, and 13 1011-245-0805
90° 8.5, 10, and 13 1011-246-0805
DT04-12P* 180° 10, 13, and 17 1011-249-1205
90° 10, 13, and 17 1011-250-1205
Plug Backshells
Connector Style Strain
Relief
Tubing Size
(mm) P/N
DT06-2S 180° 6, 7.5, 8.5, and 10 1011-227-0205
180° X 6, 7.5, 8.5, and 10 1011-255-0205
90° 6, 7.5, 8.5, and 10 1011-228-0205
90° X 6, 7.5, 8.5, and 10 1011-256-0205
DT06-3S 180° 6, 7.5, 8.5, and 10 1011-231-0305
180° X 6, 7.5, 8.5, and 10 1011-259-0305
90° 6, 7.5, 8.5, and 10 1011-232-0305
90° X 6, 7.5, 8.5, and 10 1011-260-0305
DT06-4S 180° 6, 7.5, 8.5, and 10 1011-235-0405
180° X 6, 7.5, 8.5, and 10 1011-263-0405
90° 6, 7.5, 8.5, and 10 1011-236-0405
90° X 6, 7.5, 8.5, and 10 1011-264-0405
DT06-6S 180° 8.5, 10, and 13 1011-239-0605
180° X 8.5, 10, and 13 1011-267-0605
90° 8.5, 10, and 13 1011-240-0605
90° X 8.5, 10, and 13 1011-268-0605
DT06-08S* 180° 8.5, 10, and 13 1011-243-0805
90° 8.5, 10, and 13 1011-244-0805
DT06-12S* 180° 10, 13, and 17 1011-247-1205
90° 10, 13, and 17 1011-248-1205
Connector FP [N] FT [N]
DT04-2P / DT06-2S 50 / 50 50 / 10
DT04-3P / DT06-3S 50 / 50 50 / 50
DT04-4P / DT06-4S 50 / 50 50 / 25
DT04-6P / DT06-6S 50 / 50 50 / 30
DT04-08P* / DT06-08S* 50 / 50 50 / 35
DT04-12P* / DT06-12S* 50 / 50 50 / 40
90° 90°
FT
FP
FP
FT
Backshells
The Deutsch DT Series backshells are designed to
snap onto and mate with all standard (basic plug and
receptacles without modifi cations) DT Series connectors.
The rigid, durable backshells offer a high level of
protection and allow convoluted tubing to nest within
the rear of the backshell. Straight (180°) and right
angle (90°) versions and backshells with strain relief for
jacketed cable are also available.
The backshells are available for both standard plugs
and standard receptacles. Since they are designed to
work with the standard DT connectors, tests should be
conducted for fi t and function of a backshell being used
on any part with a modifi cation.
Pull Off Strength