1.500" 1.500" 1 Top View 5 0.822" 1.294"Assembled 0.218" 0.050" 0.018"0.001"dia.typ. 2 4 0.372" 0.206" 0.125" 0.017" Side View 0.442" 1 Substrate: 0.0625"0.007" FR4/G10 or equivalent high temp material. 1/2 oz. Cu clad. SnPb plating 2 Pins: Material- Brass Alloy 360 1/2 hard; finish- 10" Au over 50" Ni (min.). 4 Leads: material- BeCu Alloy 194; plating- 80/20 SnPb. 5 Test points: material- Phosphor Bronze; plating- Sn over 50" Ni. Gold flash on contact end. Description:Carrier adaptor; 2 piece pluggable adaptor, PLCC ZIF socket with test probes to surface mountable PLCC emulator foot. All tolerances: 0.005" (unless stated otherwise). Materials and specifications are subject to change without notice. CA-PLCC028-Z-J-T-01 DRAWING (c) 1994 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 Status: Released Scale: 2:1 Drawing: M. Lund File: PCA-PLCC028-Z-J-T-01 DWG Rev: D Date: 8/17/94 Modified: 7/31/98