74F02
Quad 2-input NOR gate
Product specification
IC15 Data Handbook
1990 Oct 04
INTEGRATED CIRCUITS
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
2
1990 Oct 04 853-0326 00622
FEATURE
•Industrial temperature range available (–40°C to +85°C)
TYPE TYPICAL
PROPAGATION
DELAY
TYPICAL SUPPLY
CURRENT
(TOTAL)
74F02 3.4ns 4.4mA
PIN CONFIGURATION
14
13
12
11
10
9
87
6
5
4
3
2
1
GND
VCC
D2b
D2a
Q2
D3a
Q3
D3b
D0a
D0b
Q1
Q0
D1a
D1b
SF00007
ORDERING INFORMATION
ORDER CODE
DESCRIPTION COMMERCIAL RANGE
VCC = 5V ±10%, Tamb = 0°C to +70°CINDUSTRIAL RANGE
VCC = 5V ±10%, Tamb = –40°C to +85°CPKG DWG #
14-pin plastic DIP N74F02N I74F02N SOT27-1
14-pin plastic SO N74F02D I74F02D SOT108-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW
Dna, Dnb Data inputs 1.0/1.0 20µA/0.6mA
Qn Data output 50/33 1.0mA/20mA
NOTE:
One (1.0) FAST unit load is defined as: 20µA in the high state and 0.6mA in the low state.
LOGIC DIAGRAM
D0a
D0b
D1a
D1b
D2a
Q0
D2b
D3a
D3b
Q1
Q2
Q3
VCC = Pin 14
GND = Pin 7
1
4
10
13
2
3
5
6
8
9
11
12
SF00008
FUNCTION TABLE
INPUTS OUTPUT
Dna Dnb Qn
L L H
L H L
H L L
H H L
NOTES:
1 H = High voltage level
2 L = Low voltage level
LOGIC SYMBOL
D0a D0bD1a D2a D2b D3a D3bD1b
Q0 Q1 Q2 Q3
1 4 10 13
2356891112
VCC = Pin 14
GND = Pin 7
SF00009
IEC/IEEE SYMBOL
2
3
5
6
8
9
11
12
1
4
10
13
SF00010
1
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
1990 Oct 04 3
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device.
Unless otherwise noted these limits are over the operating free air temperature range.)
SYMBOL PARAMETER RATING UNIT
VCC Supply voltage –0.5 to +7.0 V
VIN Input voltage –0.5 to +7.0 V
IIN Input current –30 to +5 mA
VOUT Voltage applied to output in high output state –0.5 to VCC V
IOUT Current applied to output in low output state 40 mA
Tamb Operating free air temperature range Commercial range 0 to +70 °C
Industrial range –40 to +85 °C
Tstg Storage temperature range –65 to +150 °C
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER LIMITS UNIT
MIN NOM MAX
VCC Supply voltage 4.5 5.0 5.5 V
VIH High-level input voltage 2.0 V
VIL Low-level input voltage 0.8 V
IIk Input clamp current –18 mA
IOH High-level output current –1 mA
IOL Low-level output current 20 mA
Tamb Operating free air temperature range Commercial range 0 +70 °C
Industrial range –40 +85 °C
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL PARAMETER TEST CONDITIONS1LIMITS UNIT
MIN TYP2MAX
VOH High-level output voltage VCC = MIN, VIL = MAX ±10%VCC 2.5 V
VIH = MIN, IOH = MAX ±5%VCC 2.7 3.4 V
VOL Low-level output voltage VCC = MIN, VIL = MAX ±10%VCC 0.30 0.50 V
VIH = MIN, IOl = MAX ±5%VCC 0.30 0.50 V
VIK Input clamp voltage VCC = MIN, II = IIK -0.73 -1.2 V
IIInput current at maximum input
voltage VCC = MAX, VI = 7.0V 100 µA
IIH High-level input current VCC = MAX, VI = 2.7V 20 µA
IIL Low-level input current VCC = MAX, VI = 0.5V -0.6 mA
IOS Short-circuit output current3VCC = MAX -60 -150 mA
ICC Supply current (total)4ICCH VCC = MAX 3.0 5.6 mA
ICCL VCC = MAX 7.0 13.0 mA
NOTES:
1 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2 All typical values are at VCC = 5V, Tamb = 25°C.
3 Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
4I
CC is measured with outputs open.
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
1990 Oct 04 4
AC ELECTRICAL CHARACTERISTICS
LIMITS
TEST
VCC = +5.0V VCC = +5.0V ± 10% VCC = +5.0V ± 10%
SYMBOL PARAMETER
TEST
CONDITION
Tamb = +25°C Tamb = 0°C to +70°C Tamb = –40°C to +85°C UNIT
CONDITION
CL = 50pF, RL = 500ΩCL = 50pF, RL = 500ΩCL = 50pF, RL = 500Ω
MIN TYP MAX MIN MAX MIN MAX
tPLH
tPHL Propagation delay
Dna, Dnb to Qn Waveform 1 2.5
2.0 4.4
3.2 5.5
4.3 2.5
2.0 6.5
5.3 2.5
1.5 7.0
6.0 ns
AC WAVEFORMS
For all waveforms, VM = 1.5V.
VM
VM
VM
VM
Qn
Dna, Dnb
tPHL tPLH
SF00005
W aveform 1. Propagation delay for inverting outputs
TEST CIRCUIT AND WAVEFORM
tw90%
VM
10%
90%
VM10%
90%
VM10%
90%
VM
10%
NEGATIVE
PULSE
POSITIVE
PULSE
tw
AMP (V)
0V
0V
tTHL (tf )
INPUT PULSE REQUIREMENTS
rep. rate twtTLH tTHL
1MHz 500ns 2.5ns 2.5ns
Input Pulse Definition
VCC
family
74F
D.U.T.
PULSE
GENERATOR
RL
CL
RT
VIN VOUT
Test Circuit for Totem-Pole Outputs
DEFINITIONS:
RL= Load resistor;
see AC ELECTRICAL CHARACTERISTICS for value.
CL= Load capacitance includes jig and probe capacitance;
see AC ELECTRICAL CHARACTERISTICS for value.
RT= Termination resistance should be equal to ZOUT of
pulse generators.
tTHL (tf )
tTLH (tr )
tTLH (tr )AMP (V)
amplitude
3.0V 1.5V
VM
SF00006
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
1990 Oct 04 5
DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
1990 Oct 04 6
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification
74F02Quad 2-input NOR gate
1990 Oct 04 7
NOTES
Philips Semiconductors Product specification
74F02
Quad 2-input NOR gate
1990 Oct 04 8
DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1
Philips Semiconductors Product specification
74F02
Quad 2-input NOR gate
1990 Oct 04 9
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification
74F02
Quad 2-input NOR gate
1990 Oct 04 10
NOTES
Philips Semiconductors Product specification
74F02
Quad 2-input NOR gate
1990 Oct 04 11
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appl iances, devices,
or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
DEFINITIONS
Data Sheet Identification Product Status Definition
Objective Specification
Preliminary Specification
Product Specification
Formative or in Design
Preproduction Product
Full Production
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Copyright Philips Electronics North America Corporation 1997
All rights reserved. Printed in U.S.A.
