PM3T5V0(C)A - PM3T170(C)A
1500W TRANSIENT VOLTAGE SUPPRESSOR
POWERMITEâ3
06/16/03 11:00AM 1 of 3 PM3T5V0(C)A - PM3T170(C)A
www.diodes.com
·1500W Peak Pulse Power Dissipation
·5.0V - 170V Standoff Voltages
·Glass Passivated Die Construction
·Uni- and Bidirectional Versions Available
·Excellent Clamping Capability
·Fast Response Time
Features
Mechanical Data
Maximum Ratings @ TA = 25°C unless otherwise specified
B
C
D
E
G
JH
K
L
M
A
P
12
3
C
Notes: 1. Device mounted on FR-4 substrate, 2"x2", 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout
document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
2. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum.
3. Unidirectional units only.
Characteristic Symbol Value Unit
Peak Pulse Power Dissipation
(10x1000 R.E.A. Waveform) PPK 1500 W
Peak Forward Surge Current, 8.3ms Single Half Sine
Wave Superimposed on Rated Load (JEDEC Method)
(Excluding Bidirectional)
IFSM 200 A
Instantaneous Forward Voltage @ IPP = 35A
(Notes 2, & 3) VF3.5 V
Typical Thermal Resistance Junction to Soldering Point RqJS 2.5 °C/W
Typical Thermal Resistance Junction to Ambient (Note 1) RqJA 130 °C/W
Operating and Storage Temperature Range Tj,T
STG -55 to +150 °C
NOITAMROFNIECNAVDA
POWERMITEâ3
Dim Min Max
A4.03 4.09
B6.40 6.61
C.889 NOM
D1.83 NOM
E1.10 1.14
G.178 NOM
H5.01 5.17
J4.37 4.43
K.178 NOM
L.71 .77
M.36 .46
P1.73 1.83
All Dimensions in mm
Note: Pins 1 & 2 must be electrically
connected at the printed circuit board.
·Case: POWERMITEâ3, Molded Plastic
·Plastic Material - UL Flammability
Classification Rating 94V-0
·Moisture sensitivity: Level 1 per J-STD-020A
·Terminals: Solderable per MIL-STD-202,
Method 208
·Polarity: See Diagrams
·Marking: See Page 3
·Weight: 0.072 grams (approx.)
·Ordering Information: See Page 3
PIN 1
PIN 1
PIN 2
PIN 2
PIN 3, BOTTOMSIDE
HEAT SINK
PIN 3, BOTTOMSIDE
HEAT SINK
BIDIRECTIONAL DEVICE (CA SUFFIX)
UNIDIRECTIONAL DEVICE (A SUFFIX)