Matrix
WSD 81WS 81 WSD 161
WS 51 WSD 151
LR 21
SOLDERING PENCIL ■■■■■
(KH 20 support for LR 21)
LR 82
SOLDERING PENCIL ■■■■
(KH 27 support for LR 82)
WSP 80
SOLDERING PENCIL ■■■■
(WHP 80 support for WSP 80)
WSP 150
SOLDERING PENCIL ■■
(KH 27 support for WSP 150)
MPR 80
ANTISTATIC PERITRONIC ■■■■
SOLDERING PENCIL
(KH 25P and AK 21 supports)
WMP
MICRO SOLDERING PENCIL ■■■
(WPHM support for WMP)
WST 20
THERMAL STRIPPING TOOL ■■■■■
WITH SUPPORT
WHP 80
HEATING PLATE ■■■■
WTA 50
HEATED TWEEZER ■■■■■
(AK 51 support for WTA 50)
WSB 80
TEMPERATURE CONTROLLED ■■■■
SOLDER BATH
WCB 2
CALIBRATION UNIT ■■■
Lead Free Soldering with Weller Tools*
Two 80W stations, the WS 81 and WSD 81,
increase the ability to work on high-mass
components where a greater controlled
power is required.
The digital stations WSD 81, WSD 151 and
WSD 161 are able to display the set, read
and actual temperatures.
The WSD 161 also has dual outputs to drive
2 x WSP 80 soldering irons which are
supplied with the station. The outputs are
able to be set at different temperatures
and can be individually switched on/off.
To meet the requirements of high tempera-
ture soldering or applications needing high
power, the WSD 151 can be set to a tem-
perature of 550 deg C.
All of these stations are able to drive any
of the “Temtronic” tools compatible with
the rating of the stations.
For users who prefer to control the temper-
ature of the soldering iron by changing the
tip, the WTCP 51 is the latest version of the
tried and tested Magnastat controlled tool.
More Powerful.
The heating elements in the WSP 80 and
WSP 150 soldering irons are designed in such
a way that the thermal energy generated by
the element is passed to the patented low
mass bits by thermal conduction.
As a result the soldering irons have faster
heat up and recovery times than other con-
ventional tools.
The effect of this rapid recovery rate is that
there is very little temperature loss at the tip
when making high mass or rapid soldering
joints. Therefore making these tools ideally
suited for production line applications.
All of Wellers electronically controlled solder-
ing, desoldering and rework stations meet
the current ESD safety requirements.
Faster.
C°
350°
300°
250°
200°
150°
100°
50°
51015 5525 30 35 40 45 50
20 SEC.
WSP 80
14 sec.
Heating-up
period
Regular Iron
45-55 sec.
Heating-up
period
Set temperature 350°C
L
E
A
D
F
R
E
E
Info
Info
Why Lead Free?
Based on the global ambitions of pollution
prevention, starting from July, 1st 2006,
the European Community laws request to
use only lead free tin for soldering.
Why Weller?
Weller has a long experience with lead
free solder. Our customers in Japan and
China are successfully working with Weller
soldering equipment and lead free solder
since many years. The Weller Silver Line
technique has proofen its quality and perfor-
mance. Your company should benefit as well
from our knowledge and experience.
Tools that Facilitate your Work when
Soldering with Lead Free Solder
The Weller soldering iron WSP 80 is accurately
adjustable to every solder task. The LT LF tip
series offers a lot of special types for use with
lead free solder.
* Further information on www.cooperhandtools.com/europe
Weller leads the market with a growing
generation of temperature-controlled
stations and tools. They are more powerful,
faster, intelligent and reliable than ever
before. These small, good-looking stations
easily connect to a variety of new and
existing Weller soldering irons and acces-
sories to provide greater flexibility and put
you firmly in control of all your workbench
needs.
Control.
All five of the electronically controlled sta-
tions are able to drive the range of
"Temtronic” tools, provided the tool is com-
patible with the rating of the station. The
matrix will let you plan your workbench to
ensure you have the best connections Weller
can bring.
More Intelligent.
Reworking and Repair.
Greater Flexibility.
All of the digital stations have the added facility
of being able to be programmed from the WCB 2
control box. This feature allows temperature
offset, temperature lock out and temperature
set back with automatic switch off to be set.
The processor in these stations is able to recog-
nise which tool is in use and calibrate the station
output so that any tool compatible with the rat-
ing of the station can be driven and controlled,
without the need to recalibrate.
The adjustments can be audited according
to ISO standards.
The Weller WAD 101 hot air station, WDD 81V
desoldering station and WDD 161V rework
station are natural partners of the Weller SL
series of soldering stations. Equally powerful,
fast, intelligent and reliable, the WAD 101,
WDD 81V and WDD 161V provide you
with total flexibility to control the most
demanding rework/repair task.
For full details of connecting tools, tips,
nozzles and accessories, refer to the latest
CooperTools Electronics Price List.
WAD 101 hot air station
WDD 161V rework station
WDD 81V desoldering station
Tips for the WSP 80, WSP 80FE and MPR 80 Soldering pencils:*
Tips for the WSP 150 Soldering pencil:
Weller Digital Soldering Station
LT 1
Ø 0,25 mm
Round tip
5 44 435 99
LT 1L
Ø 0,2 mm
Round tip
5 44 423 99
LT 1S
Ø 0,2 mm
Round tip
5 44 436 99
LT AS
Ø 1,6 mm
Round tip
5 44 404 99
LT CS
Ø 3,2 mm
Round tip
5 44 411 99
LT H
0,8 mm
Chisel tip
5 44 437 99
LT K
1,2 mm
Chisel tip
5 44 438 99
LT F
1,2 mm
Chisel tip
5 44 408 99
LT A
1,6 mm
Chisel tip
5 44 440 99
LT L
2,0 mm
Chisel tip
5 44 414 99
LT B
2,4 mm
Chisel tip
5 44 405 99
LT C
3,2 mm
Chisel tip
5 44 407 99
LT M
3,2 mm
Chisel tip
5 44 415 99
LT D
4,6 mm
Chisel tip
5 44 409 99
LT 4
Sloped tip
5 44 439 99
LT GW
Ø 3,2 mm
Sloped tip
5 44 410 99
LT S
Ø 0,4 mm
Conical tip
5 44 406 99
LT 1LX
Ø 0,2 mm
Bent tip
5 44 424 99
LT HX
0,8 mm
Bent tip
5 44 420 99
LT 4X
Ø 1,2 mm
Bent tip
5 44 428 99
LT AX
Ø 1,6 mm
Bent tip
5 44 427 99
LT 1X
Ø 2,0 mm
Bent tip
5 44 425 99
LHT D
5 mm
Chisel tip
5 44 452 99
LHT E
7 mm
Chisel tip
5 44 451 99
LHT F
10 mm
Chisel tip
5 44 450 99
LT 1SLX
Ø 2,0 mm
Bent tip
5 44 426 99
LT ALX
1,6 mm
Bent tip
5 44 443 99
LT BX
2,4 mm
Bent tip
5 44 442 99
WSD 81 Soldering station
LHT DX
5 mm
Chisel tip
5 44 462 99
LT Adaptor
For SMD
tips
5 44 417 99
LHT EX
7 mm
Chisel tip
5 44 461 99
LHT FX
10 mm
Chisel tip
5 44 460 99
LHT
Calibration
tip
5 44 453 99
LT BB
2,4 mm
sloped tip
5 44 444 99
LT CC
3,2 mm
sloped tip
5 44 445 99
LT Measuring
tip
5 44 416 99
* Different tips for lead free applications see Electronics Price List or on www.cooperhandtools.com/europe
WSD 81
WS 81 WSD 161WS 51
WSD 151
WTCP 51
Here’s the line-up of the
new Weller soldering stations.
Consists of:
■PU 81 Power unit
5 32 526 99
(UK: 5 32 523 99)
■LR 21 Pencil
5 25 106 99
■KH 20 Holder
5 15 020 99
■Analogue control
electronics
■Protection class 1
■Antistatic housing
■Temperature control
infinitely variable
from 150˚C - 450˚C
with potentiometer
■All Temtronic tools up
to 50W may be con-
nected
■Accuracy ±2%
of final value
■Visual control
with LED
■Equipotential
bonding (normal
state hard grounded)
■Includes safety rest
for the soldering tool
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 306 99
(UK: 5 32 303 99)
Consists of:
■PU 81 Power unit
5 32 526 99
(UK: 5 32 523 99)
■WSP 80 Pencil
5 29 161 99
■WPH 80 Holder
5 15 140 99
■Analogue control
electronics
■Protection class 1
■Antistatic housing
■Temperature control
from 150˚C - 450˚C
adjustable with
potentiometer
■All Temtronic tools
up to 80W may be
connected
■Accuracy ±2%
of final value
■Visual control
with LED
■Equipotential
bonding (normal
state hard grounded)
■Includes safety rest
for the soldering tool
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 506 99
(UK: 5 32 503 99)
Consists of:
■PUD 81 Power unit
5 32 626 99
(UK: 5 32 623 99)
■WSP 80 Pencil
5 29 161 99
■WPH 80 Holder
5 15 140 99
■Digital control
electronics
■Protection class 1
■Equipotential
bonding (normal
state hard grounded)
■Antistatic housing
■Temperature control
from 50˚C - 450˚C
adjustable with
buttons
■Automatic tool
recognition
■All Temtronic tools
up to 80W may be
connected
■Calibration box may
be connected for
time (setback) and
locking functions
(lock-out)
■3-position digital
display for PRESET
and READ VALUE
■Accuracy ±2%
of final value
■Includes safety rest
for the soldering tool
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 606 99
(UK: 5 32 603 99)
Consists of:
■PUD 161 Power unit
5 32 726 99
(UK: 5 32 723 99)
■WSP 80 Pencil (2 x)
5 29 161 99
■WPH 80 Holder (2 x)
5 15 140 99
■Digital control
electronics
■Protection class 1
■Equipotential
bonding (normal
state hard grounded)
■Antistatic housing
■Two independent
temperature controls
from 50˚C - 450˚C
adjustable with
buttons
■Automatic tool
recognition
■All Temtronic tools
up to 2 x 80W may
be connected
■Calibration box may
be connected for
time (setback) and
locking functions
(lock-out)
■3-position digital
display, for both
channels PRESET
and READ VALUE
may be switched
over via button
■Accuracy ±2%
of final value
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 706 99
(UK: 5 32 703 99)
Consists of:
■PUD 151 Power unit
5 32 786 99
(UK: 5 32 783 99)
■WSP 150 Pencil
5 29 170 99
■KH 27 Holder
5 15 027 99
■Digital control
electronics
■Protection class 1
■Equipotential
bonding (normal
state hard grounded)
■Temperature control
from 50˚C-550˚C
adjustable with
buttons, automatically
limited to 450˚C if
any tool other
than the WSP 150
pencil is connected
■Automatic tool
recognition
■All Temtronic tools
up to 150W may be
connected
■Calibration box
may be connected
for time (setback)
and locking functions
(lock-out)
■3-position digital
display for PRESET
and READ VALUE
■Accuracy ± 2% of
final value
■Includes safety rest
for the soldering tool
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 766 99
(UK: 5 32 763 99)
Consists of:
■P 51 Power unit
5 32 226 99
(UK: 5 32 223 99)
■TCP Pencil
5 32 105 99
■KH 20 Holder
5 15 020 99
■On/Off controller
■Magnastat System
■Protection class 1
■Antistatic housing
■Temperature control
variable by tip
exchange
■Hard grounded
■Includes safety rest
for the soldering tool
■Dimensions -
166 x 115 x 101 mm
(L x W x H)
■Order No: 5 32 206 99
(UK: 5 32 203 99)
5 56 621 02 / 09.05 HOL 3.0
L
E
A
D
F
R
E
E
Info
Info
L
E
A
D
F
R
E
E
Info
Info
L
E
A
D
F
R
E
E
Info
Info
L
E
A
D
F
R
E
E
Info
Info
GERMANY GREAT BRITAIN
Cooper Tools GmbH Cooper Tools Ltd.
Carl-Benz-Str. 2 Suite 15, Coniston House
74354 Besigheim Towne Centre
Tel: (07143) 580-0 Washington, Tyne & Wear
Fax: (07143) 580-108 NE38 7RN
Tel: (0191) 419 7700
Fax: (0191) 417 9421
FRANCE ITALY THE NETHERLANDS
Cooper Tools S.A.S Cooper Italia S.p.A. Cooper Tools B.V.
25 Avenue Maurice Chevalier Viale Europa 80
Phileas Foggstraat 16
77832 Ozoir-la-Ferrière 20090 Cusago (MI) 7821 AK Emmen Drenthe
Tél: (1) 60.18.55.40 Tel: (02) 9033101 Tel: (0591) 66 75 00
Fax: (1) 64.40.33.05 Fax: (02) 90394231 Fax: (0591) 66 75 95
TM
www.cooperhandtools.com/europe
© 2005, Cooper Industries, Inc.
Weller is a registered trademark and registered design of Cooper Industries Inc.
