Philips Semiconductors Product Specification
Silicon Bi-directional Trigger Device BR100/03
GENERAL DESCRIPTION QUICK REFERENCE DATA
Siliconbidirectionaltrigger device ina SYMBOL PARAMETER MIN. MAX. UNIT
glass envelope intended for use in
triac and thyristor trigger circuits. V(BO) Breakover voltage 28 36 V
VOOutput voltage 7 - V
IFRM Repetitive peak forward current - 2 A
OUTLINE - SOD27 SYMBOL
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
IFRM Repetitive peak forward t 10 µs, Ta 50˚C; f = 60 Hz - 2 A
current
Ptot Total power dissipation Ta = 50˚C - 150 mW
Tstg Storage temperature -55 125 ˚C
TjOperating junction - 100 ˚C
temperature
THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Rth j-a Thermal resistance junction to in free air - 330 - K/W
ambient
Rth j-lead Thermal resistance junction to - 150 - K/W
leads
CHARACTERISTICS
Ta = 25 ˚C unless otherwise stated.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V(BO) Breakover voltage I = I(BO) 28 32 36 V
|V(BO)+| - |V(BO)-| Breakover voltage symmetry I = I(BO), see fig: 1 - - 3.5 V
VOOutput voltage RL = 20 ; Circuit of fig: 2 7 - - V
I(BO) Breakover current V = V(BO) --50µA
dV(BO)/dT Temperature coefficient of - 0.1 - %/K
V(BO)
trRisetime Ip = 0.5 A; Circuit of fig: 2 - 1.5 µs
February 1996 1 Rev 1.100
Philips Semiconductors Product Specification
Silicon Bi-directional Trigger Device BR100/03
Fig.1. Current-voltage characteristics Fig.2. Test circuit for output voltage and risetime.
MECHANICAL DATA
Dimensions in mm
Fig.3. SOD27.
I
V
V(BO)I
I(BO)I
I(BO)III
V(BO)III
230 V, RMS, 50Hz
100nF
10k D.U.T.
500k
50R
VBO
IT
Adjust for Ip=0.5A
Vo
when measuring risetime
10R
Set load resistance
measuring output voltage
to 20 Ohms when
1.95
max
4.5
max
24
min 24
min
0.56
max
February 1996 2 Rev 1.100
Philips Semiconductors Product Specification
Silicon Bi-directional Trigger Device BR100/03
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
February 1996 3 Rev 1.100