INTEGRATED CIRCUITS DIVISION
DS-IXD_604-R05 www.ixysic.com 1
e3
Pb
Features
•4A Peak Source/Sink Drive Current
•Wide Operating Voltage Range: 4.5V to 35V
•-40°C to +125°C Extended Operating Temperature
Range
•Logic Input Withstands Negative Swing of up to 5V
•Outputs May be Connected in Parallel for Higher
Drive Current
•Matched Rise and Fall Times
•Low Propagation Delay Time
•Low, 10A Supply Current
•Low Output Impedance
Applications
•Efficient Power MOSFET and IGBT Switching
•Switch Mode Power Supplies
•Motor Controls
•DC to DC Converters
•Class-D Switching Amplifiers
•Pulse Transformer Driver
Description
The IXDD604/IXDF604/IXDI604/IXDN604 dual
high-speed gate drivers are especially well suited for
driving the latest IXYS MOSFETs and IGBTs. Each of
the two outputs can source and sink 4A of peak
current while producing voltage rise and fall times of
less than 10ns. The input of each driver is virtually
immune to latch up, and proprietary circuitry
eliminates cross conduction and current
“shoot-through.” Low propagation delay and fast,
matched rise and fall times make the IXD_604 family
ideal for high-frequency and high-power applications.
The IXDD604 is a dual non-inverting driver with an
enable. The IXDN604 is a dual non-inverting driver,
the IXDI604 is a dual inverting driver, and the IXDF604
has one inverting driver and one non-inverting driver.
The IXD_604 family is available in a standard 8-pin
DIP (PI), 8-pin SOIC (SIA), 8-pin Power SOIC with an
exposed metal back (SI), and an 8-pin DFN (D2)
package.
Ordering Information
Part Number Logic
Configuration Package Type Packing
Method Quantity
IXDD604D2TR 8-Pin DFN Tape & Reel 2000
IXDD604PI 8-Pin DIP Tube 50
IXDD604SI 8-Pin Power SOIC with Exposed Metal Back Tube 100
IXDD604SITR 8-Pin Power SOIC with Exposed Metal Back Tape & Reel 2000
IXDD604SIA 8-Pin SOIC Tube 100
IXDD604SIATR 8-Pin SOIC Tape & Reel 2000
IXDF604PI 8-Pin DIP Tube 50
IXDF604SI 8-Pin Power SOIC with Exposed Metal Back Tube 100
IXDF604SITR 8-Pin Power SOIC with Exposed Metal Back Tape & Reel 2000
IXDF604SIA 8-Pin SOIC Tube 100
IXDF604SIATR 8-Pin SOIC Tape & Reel 2000
IXDI604PI 8-Pin DIP Tube 50
IXDI604SI 8-Pin Power SOIC with Exposed Metal Back Tube 100
IXDI604SITR 8-Pin Power SOIC with Exposed Metal Back Tape & Reel 2000
IXDI604SIA 8-Pin SOIC Tube 100
IXDI604SIATR 8-Pin SOIC Tape & Reel 2000
IXDN604PI 8-Pin DIP Tube 50
IXDN604SI 8-Pin Power SOIC with Exposed Metal Back Tube 100
IXDN604SITR 8-Pin Power SOIC with Exposed Metal Back Tape & Reel 2000
IXDN604SIA 8-Pin SOIC Tube 100
IXDN604SIATR 8-Pin SOIC Tape & Reel 2000
ENA
INA
ENB
INB
OUTA
OUTB
A
B
INA
INB
A
B
OUTA
OUTB
INA
INB
A
B
OUTA
OUTB
INA
INB
OUTA
OUTB
A
B
IXD_604
4-Ampere Dual Low-Side
Ultrafast MOSFET Drivers
INTEGRATED CIRCUITS DIVISION
IXD_604
2www.ixysic.com R05
1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.5 Electrical Characteristics: TA = 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.6 Electrical Characteristics: -40°C < TA < +125°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.7 Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. IXD_604 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Timing Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Characteristics Test Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Block Diagrams & Truth Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1 IXDD604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2 IXDI604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.3 IXDF604. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.4 IXDN604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Typical Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.1 Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2 ESD Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3 Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.4 Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 3
1 Specifications
1.1 Pin Configurations 1.2 Pin Definitions
1.3 Absolute Maximum Ratings
Absolute maximum electrical ratings are at 25°C
Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device.
Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not
implied.
1.4 Recommended Operating Conditions
IXDD604PI/SI/SIA
ENA
INA
GND
INB
ENB
OUTA
VCC
OUTB
1
4
3
2
8
5
6
7
A
B
IXDF604PI/SI/SIA
NC
INA
GND
INB
NC
OUTA
VCC
OUTB
1
4
3
2
8
5
6
7
A
B
IXDI604PI/SI/SIA
NC
INA
GND
INB
NC
OUTA
VCC
OUTB
1
4
3
2
8
5
6
7
A
B
IXDN604PI/SI/SIA
NC
INA
GND
INB
NC
OUTA
VCC
OUTB
1
4
3
2
8
5
6
7
A
B
IXDD604D2
ENA
INA
INB
ENB
OUTA
GND
VCC
OUTB
A
1
4
3
2
8
5
6
7
B
Pin Name Description
INA Channel A Logic Input
INB Channel B Logic Input
ENA
Channel A Enable Input -
Drive pin low to disable Channel A and force
Channel A Output to a high impedance state
ENB
Channel B Enable Input -
Drive pin low to disable Channel A and force
Channel A Output to a high impedance state
OUTA
OUTA
Channel A Output - Sources or sinks current to
turn-on or turn-off a discrete MOSFET or IGBT
OUTB
OUTB
Channel B Output - Sources or sinks current to
turn-on or turn-off a discrete MOSFET or IGBT
VCC Supply Voltage - Provides power to the device
GND Ground - Common ground reference for the
device
Parameter Symbol Minimum Maximum Units
Supply Voltage VCC -0.3 40 V
Input Voltage VINx , VENx -5 VCC+0.3 V
Output Current IOUT -±4A
Junction Temperature TJ-55 +150 °C
Storage Temperature TSTG -65 +150 °C
Parameter Symbol Range Units
Supply Voltage VCC 4.5 to 35 V
Operating Temperature Range T
A-40 to +125 °C
INTEGRATED CIRCUITS DIVISION
4www.ixysic.com R05
IXD_604
1.5 Electrical Characteristics: TA = 25°C
Test Conditions: 4.5V < VCC < 35V, one channel (unless otherwise noted).
1.6 Electrical Characteristics: -40°C < TA < +125°C
Test Conditions: 4.5V < VCC < 35V, one channel (unless otherwise noted).
Parameter Conditions Symbol Minimum Typical Maximum Units
Input Voltage, High 4.5V < VCC < 18V VIH 3.0 - - V
Input Voltage, Low 4.5V < VCC < 18V VIL --0.8
Input Current 0V < VIN < VCC IIN --±10A
High EN Input Voltage IXDD604 only VENH 2/3VCC --
V
Low EN Input Voltage IXDD604 only VENL --
1/3VCC
Output Voltage, High - VOH VCC-0.025 --
V
Output Voltage, Low - VOL - - 0.025
Output Resistance, High State VCC=18V, IOUT=-10mA ROH -1.32.5
Output Resistance, Low State VCC=18V, IOUT=10mA ROL -1.12
Output Current, Continuous Limited by package power
dissipation IDC --±1A
Rise Time VCC=18V, CLOAD=1000pF tr-916
ns
Fall Time VCC=18V, CLOAD=1000pF tf-814
On-Time Propagation Delay VCC=18V, CLOAD=1000pF tondly -2950
Off-Time Propagation Delay VCC=18V, CLOAD=1000pF toffdly -3550
Enable to Output-High Delay Time IXDD604 only, VCC=18V tENOH -3555
Disable to High Impedance State Delay Time IXDD604 only, VCC=18V tDOLD -4055
Enable Pull-Up Resistor - REN -200-k
Power Supply Current
VCC=18V, VIN=3.5V
ICC
-13mA
VCC=18V, VIN=0V -<110
A
VCC=18V, VIN=VCC -<110
Parameter Conditions Symbol Minimum Maximum Units
Input Voltage, High 4.5V < VCC < 18V VIH 3.1 - V
Input Voltage, Low 4.5V < VCC < 18V VIL -0.65
Input Current 0V < VIN < VCC IIN -10 10 A
Output Voltage, High - VOH VCC-0.025 -V
Output Voltage, Low - VOL -0.025
Output Resistance, High State VCC=18V, IOUT=-10mA ROH -3
Output Resistance, Low State VCC=18V, IOUT=10mA ROL -2.5
Output Current, Continuous Limited by package power
dissipation IDC -±1A
Rise Time VCC=18V, CLOAD=1000pF tr-16
ns
Fall Time VCC=18V, CLOAD=1000pF tf-14
On-Time Propagation Delay VCC=18V, CLOAD=1000pF tondly -65
Off-Time Propagation Delay VCC=18V, CLOAD=1000pF toffdly -65
Enable to Output-High Delay Time IXDD604 only, VCC=18V tENOH -65
Disable to High Impedance State Delay Time IXDD604 only, VCC=18V tDOLD -65
Power Supply Current
VCC=18V, VIN=3.5V
ICC
-3.5mA
VCC=18V, VIN=0V -150
A
VCC=18V, VIN=VCC -150
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 5
1.7 Thermal Characteristics
2 IXD_604 Performance
2.1 Timing Diagrams
2.2 Characteristics Test Diagram
Package Parameter Symbol Rating Units
D2 (8-Pin DFN)
Thermal Resistance, Junction-to-Ambient JA
35
°C/W
PI (8-Pin DIP) 125
SI (8-Pin Power SOIC) 85
SIA (8-Pin SOIC) 120
SI (8-Pin Power SOIC) Thermal Resistance, Junction-to-Case JC 10 °C/W
10%
90%
t
ondly
t
offdly
t
f
t
r
V
IH
V
IL
INx
OUTx
10%
90%
t
ondly
t
offdly
t
r
t
f
V
IH
V
IL
INx
OUTx
INTEGRATED CIRCUITS DIVISION
6www.ixysic.com R05
IXD_604
3 Block Diagrams & Truth Tables
3.1 IXDD604
3.2 IXDI604
3.3 IXDF604
3.4 IXDN604
INXENXOUTX
0 1 or open 0
1 1 or open 1
00
Z
10
Z
INXOUTX
01
10
200kΩ
ENA
INA
GND
INB
ENB
OUTA
V
CC
OUTB
V
CC
V
CC
IXDD604
200kΩ
V
CC
INA
GND
INB
OUTA
VCC
OUTB
VCC
IXDI604
INA OUTA
01
10
INB OUTB
00
11
INXOUTX
00
11
INA
GND
INB
OUTA
V
CC
OUTB
V
CC
IXDF604
INA
GND
INB
OUTA
VCC
OUTB
VCC
IXDN604
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 7
4 Typical Performance Characteristics
Supply Voltage (V)
0 5 10 15 20 25 30 35 40
Rise Time (ns)
0
20
40
60
80
100
120
A&B Rise Times vs. Supply Voltage
(Input=0-5V, f=10kHz, TA=25ºC)
C
L
=10nF
C
L
=1nF
C
L
=470pF
Supply Voltage (V)
0 5 10 15 20 25 30 35 40
Fall Time (ns)
0
20
40
60
80
100
120
A&B Fall Times vs. Supply Voltage
(Input=0-5V, f=10kHz, TA=25ºC)
C
L
=10nF
C
L
=1nF
C
L
=470pF
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Rise & Fall Times (ns)
4
5
6
7
8
9
10
A&B Rise and Fall Times
vs. Temperature
(Input=0-5V, VCC=18V, CL=1nF)
t
r
t
f
Load Capacitance (pF)
0 2000 4000 6000 8000 10000
Rise Time (ns)
0
20
40
60
80
100
120
A&B Rise Time vs. Load Capacitance
at Various VCC Levels
VCC=4.5V
VCC=8V
VCC=12V
VCC=18V
VCC=24V
VCC=35V
Load Capacitance (pF)
0 2000 4000 6000 8000 10000
Fall Time (ns)
0
20
40
60
80
100
120
A&B Fall Time vs. Load Capacitance
at Various VCC Levels
VCC=4.5V
VCC=8V
VCC=12V
VCC=18V
VCC=24V
VCC=35V
Supply Voltage (V)
0 5 10 15 20 25 30 35
Propagation Delay (ns)
20
40
60
80
100
120
140
160
Propagation Delay vs. Supply Voltage
(VIN=0-5V, CL=1nF, f=1kHz)
toffdly
tondly
Input Voltage (V)
246810 12
Propagation Delay (ns)
20
30
40
50
60
70
Propagation Delay vs. Input Voltage
(VCC=15V, CL=1nF)
tondly
toffdly
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Propagation Delay (ns)
20
25
30
35
40
45
50
Propagation Delay vs. Temperature
t
offdly
t
ondly
Temperature (ºC)
-40 -20 0 20 40 60 80100120140
Input Threshold Voltage (V)
1.7
1.9
2.1
2.3
2.5
2.7
2.9
Input Threshold Voltage
vs. Temperature
(V
CC
=18V, C
L
=1nF)
Min VIH
Max VIL
Supply Voltage (V)
0 5 10 15 20 25 30 35
Input Threshold (V)
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
Input Threshold vs. Supply Voltage
V
IH
V
IL
Supply Voltage (V)
0 5 10 15 20 25 30 35
Enable Threshold (V)
0
2
4
6
8
10
12
14
16
18
20
22
Enable Threshold vs. Supply Voltage
V
ENH
V
ENL
INTEGRATED CIRCUITS DIVISION
8www.ixysic.com R05
IXD_604
Load Capacitance (pF)
100 1000 10000
Supply Current (mA)
1
10
100
1000
Supply Current vs. Load Capacitance
Both Outputs Active
(VCC=35V)
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
f=10kHz
Load Capacitance (pF)
100 1000 10000
Supply Current (mA)
0
50
100
150
200
250
300
350
400
Supply Current vs. Load Capacitance
Both Outputs Active
(V
CC
=18V)
f=1MHz
f=500kHz
f=100kHz
f=50kHz
f=2MHz
Load Capacitance (pF)
100 1000 10000
Supply Current (mA)
0
50
100
150
200
250
300
350
400
Supply Current vs. Load Capacitance
Both Outputs Active
(VCC=12V)
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
Load Capacitance (pF)
100 1000 10000
Supply Current (mA)
0
50
100
150
200
250
300
350
Supply Current vs. Load Capacitance
Both Outputs Active
(VCC=8V)
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
Frequency (kHz)
1 10 100 1000 10000
Supply Current (mA)
1
10
100
1000
Supply Current vs. Frequency
Both Outputs Active
(V
CC
=35V)
C
L
=10nF
C
L
=1nF
C
L
=470pF
Frequency (kHz)
1 10 100 1000 10000
Supply Current (mA)
0.1
1
10
100
1000
Supply Current vs. Frequency
Both Outputs Active
(VCC=18V)
CL=10nF
CL=1nF
CL=470pF
Frequency (kHz)
1 10 100 1000
Supply Current (mA)
0.01
0.1
1
10
100
1000
Supply Current vs. Frequency
Both Outputs Active
(V
CC=12V)
C
L
=10nF
C
L
=1nF
C
L
=470pF
Frequency (kHz)
1 10 100 1000 10000
Supply Current (mA)
0.01
0.1
1
10
100
1000
Supply Current vs. Frequency
Both Outputs Active
(V
CC
=8V)
C
L
=10nF
C
L
=1nF
C
L
=470pF
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Supply Current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Quiesent Supply Current
vs. Temperature
(V
CC
=18V)
V
IN
=3.5V
V
IN
=5V
V
IN
=10V
V
IN
=0V & 18V
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Supply Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Dynamic Supply Current
vs. Temperature
(VCC=18V, VIN=5V, f=1khz, CL=1nF)
Supply Voltage (V)
0 5 10 15 20 25 30 35
Output Source Current (A)
0
-2
-4
-6
-8
-10
Output Source Current
vs. Supply Voltage
(CL=10nF)
Supply Voltage (V)
0 5 10 15 20 25 30 35
Output Sink Current (A)
0
2
4
6
8
10
Output Sink Current
vs. Supply Voltage
(CL=10nF)
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 9
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Output Source Current (A)
2
3
4
5
6
Output Source Current
vs. Temperature
(VCC=18V, CL=10nF)
Temperature (ºC)
-40 -20 0 20 40 60 80 100 120 140
Output Sink Current (A)
2.0
3.0
4.0
5.0
6.0
Output Sink Current
vs. Temperature
(VCC=18V, CL=10nF)
Supply Voltage (V)
0 5 10 15 20 25 30 35
Resistance (Ω)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
High State Output Resistance
vs. Supply Voltage
(IOUT= -10mA)
Supply Voltage (V)
0 5 10 15 20 25 30 35
Resistance (Ω)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Low State Output Resistance
vs. Supply Voltage
(IOUT= +10mA)
INTEGRATED CIRCUITS DIVISION
10 www.ixysic.com R05
IXD_604
5 Manufacturing Information
5.1 Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the
latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee
proper operation of our devices when handled according to the limitations and information in that standard as well as
to any limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to
the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
5.2 ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard
JESD-625.
5.3 Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Moisture Sensitivity Level (MSL) Rating
IXD_604SI / IXD_604SIA / IXD_604PI MSL 1
IXD_604D2 MSL 3
Device Maximum Temperature x Time
IXD_604SI / IXD_604SIA / IXD_604D2 260°C for 30 seconds
IXD_604PI 250°C for 30 seconds
e3
Pb
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 11
5.4 Mechanical Dimensions
5.4.1 SIA (8-Pin SOIC)
5.4.2 SI (8-Pin Power SOIC with Exposed Metal Back)
Note: The exposed metal pad on the back of the SI package should be connected to GND. It is not suitable for
carrying current.
Dimensions
mm
(inches)
PCB Land Pattern
Pin 1
Pin 8
3.937 ± 0.254
(0.155 ± 0.010)
5.994 ± 0.254
(0.236 ± 0.010)
0.406 ± 0.076
(0.016 ± 0.003)
4.928 ± 0.254
(0.194 ± 0.010)
1.270 REF
(0.050)
1.346 ± 0.076
(0.053 ± 0.003)
0.051 MIN - 0.254 MAX
(0.002 MIN - 0.010 MAX)
0.559 ± 0.254
(0.022 ± 0.010)
0.762 ± 0.254
(0.030 ± 0.010)
1.27
(0.050)
5.40
(0.213)
1.55
(0.061)
0.60
(0.024)
Recommended PCB Land Pattern
Dimensions
mm
(inches)
1.346 ± 0.076
(0.053 ± 0.003)
0.051 MIN - 0.254 MAX
(0.002 MIN - 0.010 MAX)
4.928 ± 0.254
(0.194 ± 0.010)
Pin 1
0.406 ± 0.076
(0.016 ± 0.003)
5.994 ± 0.254
(0.236 ± 0.010)
3.937 ± 0.254
(0.155 ± 0.010)
1.270 REF
(0.050)
0.762 ± 0.254
(0.030 ± 0.010)
7º
2.540 ± 0.254
(0.100 ± 0.010)
3.556 ± 0.254
(0.140 ±0.010)
1.27
(0.050)
5.40
(0.209)
1.55
(0.061)
0.60
(0.024)
2.75
(0.108)
3.80
(0.150)
INTEGRATED CIRCUITS DIVISION
12 www.ixysic.com R05
IXD_604
5.4.3 Tape & Reel Information for SI and SIA Packages
5.4.4 PI (8-Pin DIP)
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K0= 2.10
(0.083)
W=12.00
(0.472)
B0=5.30
(0.209)
User Direction of Feed
A0=6.50
(0.256)
P=8.00
(0.315)
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.813 ± 0.102
(0.032 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
0.254 ± 0.0127
(0.010 ± 0.0005)
INTEGRATED CIRCUITS DIVISION
IXD_604
R05 www.ixysic.com 13
5.4.5 D2 (8-Pin DFN)
5.4.6 Tape & Reel Information for D2 Package
Dimensions
mm MIN / mm MAX
(inches MIN / inches MAX)
5.00 BSC
(0.197 BSC)
4.00 BSC
(0.157 BSC)
0.80 / 1.00
(0.031 / 0.039)
0.10
(0.004)
0.95 BSC
(0.037 BSC)
0.74 / 0.83
(0.029 / 0.033)
0.30 / 0.45
(0.012 / 0.018)
3.03 / 3.10
(0.119 / 0.122)
2.53 / 2.60
(0.100 / 0.102)
0.35 / 0.45 x 45º
(0.014 / 0.018 x 45º)
Pin 1
Pin 1 Pin 8
0.20 REF
(0.008 REF)
Recommended PCB Land Pattern
4.50
(0.177)
0.45
(0.018)
1.20
(0.047)
3.10
(0.122)
2.60
(0.102)
0.95
(0.037)
0.35 x 45º
(0.014 x 45º)
NOTE:
The exposed metal pad on the back of the D2 package should
be connected to GND. Pad is not suitable for carrying current.
K0=1.90 ± 0.10
B0=5.40 ± 0.10
5º MAX
A0=4.25 ± 0.10
5º MAX
0.30 ± 0.05
(0.05)
(0.05)
R0.75 TYP
8.00 ± 0.10
2.00 ± 0.05
4.00 ± 0.10 See Note #2
12.00 ± 0.30
5.50 ± 0.05
1.75 ± 0.10
∅1.50 (MIN)
∅1.55 ± 0.05
NOTES:
1. A0 & B0 measured at 0.3mm above base of pocket.
2. 10 pitches cumulative tol. ± 0.2mm
3. ( ) Reference dimensions only.
4. Unless otherwise specified, all dimensions in millimeters.
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-IXD_604-R05
©Copyright 2012, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
11/8/2012