CrystalFreeTM Purpose Oscillator CrystalFreeTMGeneral Oscillators Active Oscillatorsatatthe the price of Passive Crystals Crystals Active Oscillators price of Passive Features Frequency Range: Output Type: Initial Frequency Tolerance: Supply Voltage: Power Consumption: Standby Current: Standard Package: Operating Temperature: 4 to 133 MHz CMOS 50 ppm 1.8 to 3.3 V 1.9 mA (1.8 V) < 1 uA 5.0 x 3.2 x 0.85 mm 2.5 x 2.0 x 0.55 mm 0 to 70 C, -20 to 70 C 0 to 85 C 3FN PRELIMINARY DATA SHEET This product is rated "Green", please contact factory for environmental compliancy information Specification Parameter Supply Voltage Output Frequency Initial Frequency Tolerance Supply Current Quiescent Current Input LOW level Input HIGH level Output LOW level Output HIGH level Tolerance over Temperature Rise/Fall Time Symmetry Start-up time Period Jitter Cycle to Cycle Jitter Symbol Specifications VDD 1.8 V 10% 2.5 V 10% 3.3 V 10% FOUT 4 to 133 MHz FITOL 50 ppm IDD 1.9 mA 2.0 mA 2.2 mA ISTBY 1 uA VIL 0.3 VDD (max) VIH 0.7 VDD (min) VOL 0.1 VDD (max) VOH 0.9 VDD (min) FTEM 100 ppm TR /TF 1.6 ns 1.2 ns 1.0 ns 45% / 55% SYM 40% / 60% TST 400 us PJRMS 17 ps 6 ps 5 ps CCJMAX 120 ps 50 ps 40 ps Conditions Nominal tolerance See ordering code 25C Typical; No load condition; 75 MHz Maximum; STBY# = GND At STBY# pin IOL = - 1 mA IOH = 1 mA Over specified operating temperatures Maximum; 20% to 80% x VDD; Output load (CL) = 4 pF Worst case; For frequencies 100MHz; Worst case; For frequencies > 100MHz; Output valid time after VDD meets the specified range & STBY# transition Output load (CL) = 4 pF; 75 MHz Output load (CL) = 4 pF; 75 MHz; measured over 12K cycles Note: Above specifications are typical at room temperature (25C ) unless otherwise specified. Package Outline and Dimensions Typical PCB Land Pattern Pin #1 ID Chamfer 0.5 x 45 1.00 0.05 3.20 0.1 0.85 1.20 0.05 5.0 x 3.2 2.2 0.0-0.05 STBY# 4L SMD 5.0 x 3.2mm 5.00 0.1 2.54 bsc Top View 2.5 x 2.0 0.65 0.05 Pin #1 ID Chamfer 0.35 x 45 Side View 1.4 1.5 0.0-0.05 0.55 0.05 STBY# 4L SMD 2.5 x 2.0mm 2.5 0.05 1.35 Bsc 1.62 Bsc VDD 0.20 REF 1.8 (mm) 0.20 Ref. Bottom View 0.72 0.05 OUT 1.6 GND 0.15 2.0 0.05 VDD 2.5 (mm) 0.85 0.05 OUT 0.9 GND 0.5 Top View Oct 24, 2011 Bottom View www.IDT.com Side View 0.8 (c)2011 Integrated Device Technology, Inc 3FN Datasheet CrystalFreeTM Oscillator Name 1 2 3 4 STBY# GND OUT2 VDD 150C ax 150 100 60-150 sec 60-180 sec 50 Time Output Waveform Pin Descriptions Pin # 217C 200 cm 4.6 V -0.5 V to VDD + 0.5 V -0.5 V to VDD + 0.5 V -65C to 150C (260C max) 3 C/ se Maximum Absolute Rating VDD STBY# OUT Storage Temperature 40 sec (max) 245C 250 ma x Item Solder Reflow Profile /sec 6C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these or under any condition beyond those listed in the operating specifications is not implied. Exposure to absolute maximum rated conditions may affect product reliability. Temperature (C) Absolute Maximum Ratings Description TR Standby Mode1 (0 = Output Disabled) Ground CMOS Output Power TF VOH 0.8 VDD 0.5 VDD 1. Pulled high internally 2. Weak pull down to GND during STBY# enable and startup 0.2 VDD VOL SYM = t1 / t2 t1 Time t2 Ordering Information 3FN11G 4.09600 22.5792 133.000 E NSG Package 8 Suffix NSG Frequency 4 to 133MHz Package NSG: 5.0 x 3.2 x 0.85 NVG: 2.5 x 2.0 x 0.55 6024 Silver Creek Valley Road San Jose, California 95138 C: E: H: Temp 0 to 70C -20 to 70C 0 to 85C Shipping Blank: Tubes 8: Tape and Reel Sales 800-345-7015 (inside USA) +1 408-284-8200 (outside USA) Fax: 408-284-2775 NVG Minimum Order Quantity (MOQ) T&R Bulk Factory Order Increment (FOI) T&R Bulk 2500 1260 (18 Tubes) 2500 1260 (18 Tubes) 3000 1250 (Canister) 3000 1250 (Canister) Technical Support crystalfreetechsupport@idt.com +1 408-360-5656 DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT's sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright 2010, 2011. All rights reserved. Oct 24, 2011 www.IDT.com (c)2011 Integrated Device Technology, Inc