* VD-120B Dual Output Switching Power Supply Features *Low cost, high reliability *105C output capacitor *Universal AC input range *High efficiency, low temperature rise *Soft-start circuit, limiting AC surge current *Short circuit, overload, over-voltage protected *Compact size, light weight *100% full load burn-in test *Buil-in EMI filter, low ripple noise CH1 DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power Efficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection Over voltage protection Temperature coefficient Set up, rise, hold up time Vibration Withstand voltage Isolation resistance Working temp., humidity Storage temp., humidity Dimensions Weight Safety standards EMC standards Notes: CH2 5V 24V 2% 7% 6A 4A 2-10A 0.4-4A 60mVp-p 150mVp-p 0.5% 1.0% 0.5% 6.0% 120W 78% CH1:+10,-5% 88~132VAC/176~264VAC selected by switch, 47~63Hz; or 248~370VDC 2.5A/115V 1.25A/230V cold start 35A <3.5mA/240VAC 105%~135% shutoff AC recycle to restart CH1:5.75V~6.75V 0.03% / C (0~50C) ON +5V output 200ms, 50ms, 20ms 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10C~+60% (refer to output derating curve), 20%-90% RH -20C~+85C, 10%-95% RH 7.83x4.33x1.97inches (199x110x50mm) 1.94lbs. (0.88Kgs) UL1950, TUV EN60950 CISPR22 (EN55022) CLASS B, IEC801-2,3,4, IEC555-2 verification 1. All parameters are specified at 230VAC input, rated load, 25C 70% ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load 5. Load regulation is measured from 0% to 100% rated load 6. Each output provides up to maximum current, but total load can not exceed max. output power 7. C2, C3, C11 must be removed *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer's applications using V-Infinity products other than repair or replacing (at V-I's option) V-Infinity products not meeting V-I's published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 * VD-120B Dual Output Switching Power Supply Block Diagram Output Derating Static Characteristics Dimensions (mm) V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258