MLT001N1500D5C MLT Series Linear Position Transducer, 25,4 mm [1.0 in] Electrical Travel, 0.25 % Linearity, Item Number F38000201 Actual product appearance may vary. Features MystR* plastic element - Tested up to one billion operations 3/8 inch diameter - Fits in tight spaces and clamps easily to cylinders Dual wiper design - Improves shock and vibration performance Extruded wiper block guides Smooth quiet motion, extends operating life Internal spring loaded ball joint Less error from shaft misalignment Anodized extruded aluminum housing - Tolerates clamping loads Stainless steel shaft - Full performance in hostile environments Precious metal contact - Low noise level over entire life Absolute continuous measurement Accurate position at power up Potential Applications Medical equipment Hospital beds Linear actuators Animated characters Gauging Woodworking guides Fluid flow meters Seismology Semiconductor Processing Description The MLT Series is a small-diameter linear position transducer that is rugged enough to withstand hostile factory environments. Using a proprietary dual wiper, internal ball joint and the MystR* conductive plastic film the MLT provides a usable output at high vibration levels over long periods of time. MLT transducers use precious metal wipers to further enhance reliability. The MLT's 3/8 inch diameter is among the smallest available and can used to replace LVDT's in many applications. Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F and G for hazardous (indoor/outdoor) NEMA 4 locations. V max.=30 V, I max.=100 mA, Ci=0, Li,=0mH. Product Specifications Supply Voltage 30 Vdc max. Measurement Type Linear Housing Size 55,88 mm [2.2 in] Total Mechanical Travel 26,67 mm [1.05 in] Electrical Travel 25,4 mm [1.0 in] Starting Force (max.) 28,35 g max. [1.0 oz max.] Linearity 0.25 % Backlash 0,0127 mm max. [0.0005 in max.] Bearing Type Sleeve Shaft Material Stainless Steel Shaft Diameter 1/8 in - #4-40 UNC-2A thread Type of Element MystR(R) conductive plastic film Housing Style Anodized Aluminum Termination 26 awg, 3 cond. - 305,0 mm [12.0 in] cable Wiper Current <1 A Resolution Infinite Operating Temperature Range -40 C to 80 C [-40 F to 176 F] Vibration 20 g / 0,75 mm (rms) 5 hz to 2 khz Shock 50 g 11 ms half sine Operating Life one billion dither operations Total Resistance 1,500 Ohms Resistance Tolerance 20 % Insulation Resistance 500 MOhm @ 500 Vdc Dielectric Strength 1000 V rms Weight (Ranges) 14 g [0.49 oz] Sealing NEMA 4 UNSPSC Code 41111945 UNSPSC Commodity 41111945 Linear position sensors Availability Global Comments Options; Electrical Travel, Total Resistance, Rod End Bearing, Metric Shaft Adapter Series Name MLT