MLT001N1500D5C
MLT Series Linear Position Transducer,
25,4 mm [1.0 in] Electrical Travel, 0.25
% Linearity, Item Number F38000201
Actual product appearance may vary.
Features
● MystR• plastic element - Tested up
to one billion operations
● 3/8 inch diameter - Fits in tight
spaces and clamps easily to cylinders
● Dual wiper design - Improves shock
and vibration performance
● Extruded wiper block guides -
Smooth quiet motion, extends
operating life
● Internal spring loaded ball joint -
Less error from shaft misalignment
● Anodized extruded aluminum
housing - Tolerates clamping loads
● Stainless steel shaft - Full
performance in hostile environments
● Precious metal contact - Low noise
level over entire life
● Absolute continuous measurement -
Accurate position at power up
Potential Applications
● Medical equipment
● Hospital beds
● Linear actuators
● Animated characters
● Gauging
● Woodworking guides
● Fluid flow meters
● Seismology
● Semiconductor
Processing
Description
The MLT Series is a small-diameter linear position transducer that is rugged
enough to withstand hostile factory environments. Using a proprietary dual wiper,
internal ball joint and the MystR• conductive plastic film the MLT provides a usable
output at high vibration levels over long periods of time. MLT transducers use
precious metal wipers to further enhance reliability.
The MLT's 3/8 inch diameter is among the smallest available and can used to
replace LVDT's in many applications.
Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F and G for
hazardous (indoor/outdoor) NEMA 4 locations. V max.=30 V, I max.=100 mA,
Ci=0, Li,=0mH.
Product Specifications
Supply Voltage 30 Vdc max.
Measurement Type Linear
Housing Size 55,88 mm [2.2 in]
Total Mechanical Travel 26,67 mm [1.05 in]
Electrical Travel 25,4 mm [1.0 in]
Starting Force (max.) 28,35 g max. [1.0 oz max.]
Linearity ± 0.25 %
Backlash 0,0127 mm max. [0.0005 in max.]
Bearing Type Sleeve
Shaft Material Stainless Steel
Shaft Diameter 1/8 in - #4-40 UNC-2A thread
Type of Element MystR® conductive plastic film
Housing Style Anodized Aluminum
Termination 26 awg, 3 cond. - 305,0 mm [12.0
in] cable
Wiper Current <1 µA
Resolution Infinite
Operating Temperature Range -40 °C to 80 °C [-40 °F to 176 °F]
Vibration 20 g / 0,75 mm (rms) 5 hz to 2 khz
Shock 50 g 11 ms half sine
Operating Life one billion dither operations
Total Resistance 1,500 Ohms
Resistance Tolerance ± 20 %
Insulation Resistance 500 MOhm @ 500 Vdc
Dielectric Strength 1000 V rms
Weight (Ranges) 14 g [0.49 oz]
Sealing NEMA 4
UNSPSC Code 41111945
UNSPSC Commodity 41111945 Linear position sensors
Availability Global
Comments Options; Electrical Travel, Total
Resistance, Rod End Bearing,
Metric Shaft Adapter
Series Name MLT
