Product Bulletin PTH Pneumatic Cable Tie Installation Tools - PTS, PTH Ergonomic Tools The pneumatic operation and ergonomic design of the PTS and the PTH cable tie installation tools improve productivity by reducing operator fatigue and repetitive motion injuries. These tools provide fast, consistent installation of subminiature through heavy cross section cable ties. They also provide a flush cable tie cut-off that prevents damage to adjacent wire bundles and protects workers' hands and arms for a safe and reliable installation. These innovative pneumatic tools are part of the complete line of Panduit cable ties and installation tooling that offer customers the preferred bundling solution. PTS PTS tool installs Subminiature (8 lbs.) through Standard (50 lbs.) cross section cable ties PTH tool installs Standard (50 lbs.) through Heavy (175 lbs.) cross section cable ties Key Features Benefits Pneumatic operation and ergonomic design Tools are comfortable and easy to use; reducing operator fatigue and repetitive motion injuries; improve productivity by minimizing downtime and providing lowest installed cost Tension and cut-off mechanism Maintains desired tension for reliable installation; consistently provides flush cable tie cut-off in less than one second, preventing damage to adjacent wire bundles and protecting workers' hands and arms Controlled tip ejection Allows operator to quickly and safely remove excess cut-off material; increases productivity by eliminating need to clean-up work area after completion of installation Beveled tie entry and narrow nose Quick side entry of tie into tool speeds installation and narrow nose permits easy access to confined areas; maximize application flexibility and increase productivity Coarse and fine tension adjustment knobs Allow operator to quickly adjust applied tension to match cable tie cross section being installed; increase productivity when applying multiple cross sections Two retractable hangers Allow for hanging the tool in the work area for improved productivity and safe storage of tool when not in use Quick disconnect fitting Allows operator to easily connect tool to any air supply source within facility; improves portability and increases productivity www.panduit.com Pneumatic Cable Tie Installation Tools - PTS and PTH Ergonomic Tools Tension Adjustment 2 1 Quickly change setting to install appropriate cross section cable ties Conveniently located at rear of tool for easy access Step 1: Use the coarse adjustment knob to select the appropriate cable tie cross section. Step 2: Use the fine adjustment knob, located in front of coarse adjustment knob, to set and maintain desired tension. Easy Adjustment Ordering Information Packaging Part Number Std. Std. Pkg. Ctn. Qty. Qty. Part Description Pneumatic Ergonomic Tools PTS PTS Pneumatic hand tool. Operates on 70 - 90 psig, non-lubricated air without special maintenance. Installs the following cable tie cross sections: Subminiature (8 lbs.); Miniature (18 lbs.); Intermediate (40 lbs.); Standard (50 lbs.). Weight: 17.3 oz. (490g); Gray plastic molded housing; Black trigger button; Black selector knob. 1 -- PTH Pneumatic hand tool. Operates on 70 - 100 psig, non-lubricated air without special maintenance. Installs the following cable tie cross sections: Standard (50 lbs.); Heavy-Standard (85 lbs.); Light-Heavy (120 lbs.); Heavy (175 lbs.) Weight: 32.0 oz. (907g); Gray plastic molded housing; Red trigger button; Red selector knob. 1 -- Tool Accessories PL289N1 Filter/regulator 0.5 micron element, regulated range 3 - 100 psig, features 1/8" NPT female output port (to Hose, PPH10) and 1/4" male quick disconnect to source air line. Use with PTS and PTH. 1 -- PPH10 Hose assembly 10' (3M) - Regulator to tool. Includes a 1/8" NPT male connector (to regulator) and 1/8" female quick disconnect (to tool). Use with PTS and PTH. 1 -- PHCAT Adapter Fitting for 10' (3M) Hose (PPH10) to regulator with 1/4" NPT female output port, features 1/8" NPT female connection (to hose) and 1/4" NPT male connection (to regulator). Use with PTS and PTH. Tension locking kit. Cover to prevent changing tension settings. Consists of lockout cap and screw. Use with PTS and PTH. 1 -- 1 10 KGTSBLD Blade replacement kit. Can be part of scheduled maintenance plan or when cable tie cut-offs are not 1 10 KPTHBLD Blade replacement kit. Can be part of scheduled maintenance plan or when cable tie cut-offs are not 1 10 GHH 1 -- KPTSTL PTH clean and crisp. Consists of threadlocker, screw and replacement blade. Use with PTS. clean and crisp. Consists of threadlocker, screw and replacement blade. Use with PTH. PL289N1, PPH10 Hand tool holster. Durable leather construction with rivets and extra tie-down strap to hold tool in place. Easily fits on belt. Use with PTS. KPTHBLD KPTSTL GHH WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6379.6700 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.3767.7011 PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: 52.333.666.2501 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 (c)2016 PANDUIT Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. CTCB57--WW-ENG replaces SA-CTCB13 3/2016