Product Bulletin
www.panduit.com
Tools are comfortable and easy to use; reducing operator fatigue and
repetitive motion injuries; improve productivity by minimizing downtime
and providing lowest installed cost
Allows operator to quickly and safely remove excess cut-off material;
increases productivity by eliminating need to clean-up work area after
completion of installation
Quick side entry of tie into tool speeds installation and narrow nose permits
easy access to confined areas; maximize application flexibility and
increase productivity
Allow operator to quickly adjust applied tension to match cable tie cross
section being installed; increase productivity when applying multiple
cross sections
Maintains desired tension for reliable installation; consistently provides flush
cable tie cut-off in less than one second, preventing damage to adjacent
wire bundles and protecting workers’ hands and arms
Pneumatic Cable Tie
Installation Tools – PTS,
PTH Ergonomic Tools
Allow for hanging the tool in the work area for improved productivity and safe
storage of tool when not in use
Key Features Benefits
The pneumatic operation and ergonomic design of the
PTS and the PTH cable tie installation tools improve
productivity by reducing operator fatigue and repetitive
motion injuries. These tools provide fast, consistent
installation of subminiature through heavy cross section
cable ties. They also provide a flush cable tie cut-off that
prevents damage to adjacent wire bundles and protects
workers’ hands and arms for a safe and reliable installation.
These innovative pneumatic tools are part of the complete
line of Panduit cable ties and installation tooling that
offer customers the preferred bundling solution.
Allows operator to easily connect tool to any air supply source within facility;
improves portability and increases productivity
PTS tool installs Subminiature (8 lbs.) through Standard (50 lbs.) cross section
cable ties PTH tool installs Standard (50 lbs.) through Heavy (175 lbs.) cross section
cable ties
PTS
PTH
Pneumatic operation and
ergonomic design
Tension and cut-off mechanism
Controlled tip ejection
Beveled tie entry and
narrow nose
Two retractable hangers
Quick disconnect fitting
Coarse and fine tension
adjustment knobs
Pneumatic Cable Tie Installation Tools – PTS and PTH Ergonomic Tools
Tension Adjustment
©2016 PANDUIT Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
CTCB57--WW-ENG
replaces SA-CTCB13
3/2016
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.3767.7011
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6379.6700
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
PANDUIT LATIN AMERICA
Jalisco, Mexico
cs-la@panduit.com
Phone: 52.333.666.2501
Contact Customer Service by email: cs@panduit.com
or by phone: 800-777-3300
Visit us at www.panduit.com
For more information
PL289N1, PPH10 KPTSTL KPTHBLD GHH
Easy Adjustment
Quickly change setting to install appropriate cross section cable ties
Conveniently located at rear of tool for easy access
Step 1: Use the coarse adjustment knob to select the appropriate cable tie cross section.
Step 2: Use the fine adjustment knob, located in front of coarse adjustment knob,
to set and maintain desired tension.
PTS
Ordering Information
1
2
Packaging
Part
Number Part Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Pneumatic Ergonomic Tools
PTS Pneumatic hand tool. Operates on 70 – 90 psig, non-lubricated air without special maintenance.
Installs the following cable tie cross sections: Subminiature (8 lbs.); Miniature (18 lbs.); Intermediate
(40 lbs.); Standard (50 lbs.). Weight: 17.3 oz. (490g); Gray plastic molded housing;
Black trigger button; Black selector knob.
1
PTH Pneumatic hand tool. Operates on 70 – 100 psig, non-lubricated air without special maintenance.
Installs the following cable tie cross sections: Standard (50 lbs.); Heavy-Standard (85 lbs.);
Light-Heavy (120 lbs.); Heavy (175 lbs.) Weight: 32.0 oz. (907g); Gray plastic molded housing;
Red trigger button; Red selector knob.
1
Tool Accessories
PL289N1 Filter/regulator 0.5 micron element, regulated range 3 – 100 psig, features 1/8" NPT female output
port (to Hose, PPH10) and 1/4" male quick disconnect to source air line. Use with PTS and PTH.
1
PPH10 Hose assembly 10' (3M) – Regulator to tool. Includes a 1/8" NPT male connector (to regulator) and
1/8" female quick disconnect (to tool). Use with PTS and PTH.
1
PHCAT Adapter Fitting for 10' (3M) Hose (PPH10) to regulator with 1/4" NPT female output port, features 1/8"
NPT female connection (to hose) and 1/4" NPT male connection (to regulator). Use with PTS
and PTH.
1
KPTSTL Tension locking kit. Cover to prevent changing tension settings. Consists of lockout cap and screw.
Use with PTS and PTH.
1 10
KGTSBLD Blade replacement kit. Can be part of scheduled maintenance plan or when cable tie cut-offs are not
clean and crisp. Consists of threadlocker, screw and replacement blade. Use with PTS.
1 10
KPTHBLD Blade replacement kit. Can be part of scheduled maintenance plan or when cable tie cut-offs are not
clean and crisp. Consists of threadlocker, screw and replacement blade. Use with PTH.
1 10
GHH Hand tool holster. Durable leather construction with rivets and extra tie-down strap to hold tool in
place. Easily fits on belt. Use with PTS.
1
PTH