Tini-O-G Connector Series [ER Material Housing: Plugs and Male Recep- tacles Copper alloy, nickel- plated; Female Receptacles Die-cast zinc, nickel-plated Black Tini-Q-G Housing: Copper alloy, black chrome-plated Release Lever and Mounting Washer: Steel, nickel-plated Standotf/Ground Terminal and Cable Clamp: Steel, electrotinned Inserts and Insulating Spacer: Molded, high strength thermo- Pin and Socket Contacts: Copper plastic alloy, silver-plated Latch (Female): Copper alloy, Flex Relief: Molded black thermo- nickel-plated plastic elastomer Mounting Nut: Copper alloy, nickel- Latch Button: Molded black ther plated moplastic Ordering Information _. Pins/ Part Number Style Finish Contacts Notes TA*F, TA*M Cord Nickel Silver Available in 3 - 6 pins or contacts TA*EL, TA*ML Cord Nickel Silver + Accommodates large cable, available in 3 - 8 pins or contacts TA*FB, TA*MB Cord Black Silver Available in 3 - 6 pins or contacts. TB*M Panel Nickel Silver Male, round flange, threaded, available in 3 - 8 pins or contacts TB*MB Panel = Black Silver Male, round flange, threaded, available in 3 - 8 pins or contacts TY*F Panel Nickel Silver Female, rectangle flange, available in 3 - 5 pins or contacts See Page 52 for Mechanical Drawings - 5555 North Elston Avenue / Chicago, IL 60630 _ Phone: 773-792-2700 / Fax: 773-792-2129 Tini-O-G Cord & Panel Style Series The Tini-OG Series is a miniature ver- sion of the standard OG Series. These mini-XLRs come in a wide variety of configurations. The stan- dard TA Series cord plugs are avail- able in 3-6 pins or contacts. The L versions, with their larger strain re- liefs, are available in 3-8 pins or con- tacts. The TB and TY Series are panel mount connectors. The TB Series is a male connector, featuring a round panel cut-out and 3-8 pins. The TY Series is a female connector, featur- ing a rectangular housing and 3-5 contacts. The TA and TB Series are available with a black finish. Gold- plated contacts are available on all series. Contact the factory for details. Specifications Electrical Contact Resistance: .010 ohms maxt- mum after life (and after salt spray) Current Rating (Carry Only): 5A, 125 VAC (4A, 125 VAC on 5 cir cuit) based on 30C maximum Insulation Resistance: 510,000 me- gohms minimum @ 500 VDC (initial); 10,000 megohms mini- mum (after humidity test) Dielectric Strength: 1,000V (rms) Mechanical Life: 5,000 operations minimum Solderability Standard: Meets EIA RS-186-9E Mechanical Shock: Meets Mil-Std- 202, method 213B Vibration: Meets Mil-Std-202, method 201A Wire Size: #22 wire gauge solid; #24 wire gauge stranded Environmental Thermal Range: -55C to +85C Humidity: Meets Mil-Std-202, method 106D Thermal Shock: Meets Mil-Std-202, method 107D Salt Spray: Meets Mil-Std-202, method 101