1EMC/EMI Products
General Purpose EMI Filter
with High Attenuation Performance
Approvals■ Rated currents from 1 to 30A
■ High performance filter attenuation
■ High differential-mode attenuation
■ Optional medical versions (B type)
■ Optional safety versions (A type)
■ Optional overvoltage protection (Z type)
Typical applications
■ FN 2030 filters are designed for easy and
fast chassis mounting.
■ The FN 2030 filters are also available as
B versions with no Y-capacitors for medical
applications as well as A versions with low
capacitance for safety critical applications
with a requirement for low leakage
currents.
■ All filters provide an exceptional conducted
attenuation performance, based on chokes
with high permeable core material and
excellent thermal behavior.
■ The higher inductivity versus amperage
offers increased attenuation performance
with same form factor compared to
FN 2010 and FN 2020 filter series.
■ All FN 2030 filters can be delivered with
optional surge pulse protection.
■ FN 2030 filters are also available as two-
stage filters (FN 2090 series) for very noisy
environment.
■ Various terminal options allow you to
select the desired connection style.
■ Electrical and electronic equipment
■ Consumer goods
■ Household equipment
■ Medical equipment
■ Electronic data processing equipment
■ Office automation and datacom equipment
■ Various noisy applications requiring high
filter performance
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 1 to 30A @ 40°C max.
High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1100VDC for 2 sec
Temperature range (operation and storage): -25°C to +100°C (25/100/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to: UL 94V-2 or better
Surge pulse protection (optional): 2kV, IEC 61000-4-5
MTBF @ 40°C/230V (Mil-HB-217F): 2,200,000 hours (1 to 10A types)
1,200,000 hours (12 to 30A types)
Typical electrical schematic
P
N
PE
Line
Cx R
L
Cy Cy
P‘
N‘
Load
Cx
1-phase Filters
FN 2030
EMC/EMI Products > FN 20302
* To compile a complete part number, please replace the -.. with the required I/O connection style. For surge pulse protection, please add Z (e.g. FN 2030Z-10-06, FN 2030BZ-20-08).
** Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Filter selection table
FN 2030-1-.. 1 (1.1) 0.34 20 0.22 2.2 1000 -06 -07 58
FN 2030-3-.. 3 (3.4) 0.52 14 0.33 3.3 1000 -06 -07 87
FN 2030-4-.. 4 (4.5) 0.52 14 0.33 3.3 1000 -06 -07 92
FN 2030-6-.. 6 (6.7) 0.73 8 0.47 4.7 680 -06 -07 100
FN 2030-8-.. 8 (8.9) 0.73 8 0.47 4.7 680 -06 -07 170
FN 2030-10-.. 10 (11.2) 0.73 8 0.47 4.7 680 -06 -07 196
FN 2030-12-.. 12 (13.4) 0.87 4 1.0 10 330 -06 -07 185
FN 2030-16-.. 16 (17.9) 0.87 4 1.0 10 330 -06 -07 225
FN 2030-20-.. 20 (22.4) 0.87 4 1.0 10 330 -06 -08 285
FN 2030-30-08 30 (33.5) 0.87 2 1.0 10 330 -08 326
FN 2030A-1-.. 1 (1.1) 0.074 20 0.22 0.47 1000 -06 -07 58
FN 2030A-3-.. 3 (3.4) 0.074 14 0.33 0.47 1000 -06 -07 87
FN 2030A-4-.. 4 (4.5) 0.074 14 0.33 0.47 1000 -06 -07 92
FN 2030A-6-.. 6 (6.7) 0.074 8 0.47 0.47 680 -06 -07 100
FN 2030A-8-.. 8 (8.9) 0.074 8 0.47 0.47 680 -06 -07 170
FN 2030A-10-.. 10 (11.2) 0.074 8 0.47 0.47 680 -06 -07 196
FN 2030A-12-.. 12 (13.4) 0.074 4 1.0 0.47 330 -06 -07 185
FN 2030A-16-.. 16 (17.9) 0.074 4 1.0 0.47 330 -06 -07 225
FN 2030A-20-.. 20 (22.4) 0.074 4 1.0 0.47 330 -06 -08 285
FN 2030A-30-08 30 (33.5) 0.074 2 1.0 0.47 330 -08 326
FN 2030B-1-.. 1 (1.1) 0.002 20 0.22 1000 -06 -07 58
FN 2030B-3-.. 3 (3.4) 0.002 14 0.33 1000 -06 -07 87
FN 2030B-4-.. 4 (4.5) 0.002 14 0.33 1000 -06 -07 92
FN 2030B-6-.. 6 (6.7) 0.002 8 0.47 680 -06 -07 100
FN 2030B-8-.. 8 (8.9) 0.002 8 0.47 680 -06 -07 170
FN 2030B-10-.. 10 (11.2) 0.002 8 0.47 680 -06 -07 196
FN 2030B-12-.. 12 (13.4) 0.002 4 1.0 330 -06 -07 185
FN 2030B-16-.. 16 (17.9) 0.002 4 1.0 330 -06 -07 225
FN 2030B-20-.. 20 (22.4) 0.002 4 1.0 330 -06 -08 285
FN 2030B-30-08 30 (33.5) 0.002 2 1.0 330 -08 326
Filter* Rated current Leakage current** Inductance Capacitance Resistance Input/Output Weight
@ 40°C (25°C) @ 230VAC/50Hz L Cx Cy R connections
[A] [mA] [mH] [µF] [nF] [kΩ] [g]
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
Typical filter attenuation
1 to 4A types 6 to 10A types 12 to 20A types 30A types
EMC/EMI Products > FN 20303
A
C
B
E
G
K
FD
I
J
H
L
M
N
Mechanical data
Connection style -06, 1A types Connection style -06, 8 to 20A types
Connection style -06, 3 to 6A types Connection style -07, 8 to 16A types (same dimensions as style -06)
Connection style -08, 20 and 30A typesConnection style -07, 1 to 6A types (same dimensions as style -06)
A
B E G
F
D
I
J
H
C
L
K
N
M
A
C
B
E
G
L
FD
I
J
H
KM
N
BN BN
BU
BU GNYE
P
O
BN BN
BU
BUGNYE
P
O
A
C
BEG
L
F
D
I
J
H
K
M
N
1A 3A 4A 6A 8A 10A 12A 16A 20A 30A Tolerances
Dimensions
A 64 71 71 71 85 85 85 85 85 85 ±0.5
B 35 46.6 46.6 46.6 54 54 54 54 54 54 ±0.5
C 24.3 22.3 22.3 22.3 30.3 30.3 30.3 40.3 40.3 40.3 ±0.5
D 43.5 50.5 50.5 50.5 64.8 64.8 64.8 64.8 64.8 64.8 ±0.5
E 32.5 44.5 44.5 44.5 49.8 49.8 49.8 49.8 49.8 49.8 ±0.5
F 54 61 61 61 75 75 75 75 75 75 ±0.3
G 21 21 21 21 27 27 27 27 27 27 ±0.2
H 9.3 10.8 10.8 10.8 12.3 12.3 12.3 12.3 12.3 12.3 ±0.5
I 15.3 16.8 16.8 16.8 20.8 20.8 20.8 29.8 29.8 29.8 ±0.5
J 21.8 25.25 25.25 25.25 19.9 19.9 19.9 11.4 11.4 11.4 ±0.5
K 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3
L 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3
M 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
Connection style -06
N 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8
Connection style -07
O 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 ±0.5
P 21.8 14 14 14 14.9 14.9 14.9 14.9 ±0.5
AWG type wire AWG 20 AWG 20 AWG 20 AWG 18 AWG 18 AWG 18 AWG 16 AWG 16
Wire length 140 140 140 140 140 140 140 140
Connection style -08
N M4 M4
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com
08/2012 EN
Headquarters, global innovation
and development center
Schaffner Group
Nordstrasse 11
4542 Luterbach
Schweiz
T +41 32 681 66 26
F +41 32 681 66 30
info@schaffner.com
www.schaffner.com
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
T20-3, No 565 Chuangye Road
Pudong New Area
Shanghai 201201
T +86 21 3813 9500
F +86 21 3813 9501 / 02
cschina@schaffner.com
www.schaffner.com
Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Japan
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial Estate
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
Spain
Schaffner EMC España
Calle Caléndula 93
Miniparc III, Edificio E
El Soto de la Moraleja
Alcobendas
28109 Madrid
T +34 618 176 133
spainsales@schaffner.com
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
swedensales@schaffner.com
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
sales@schaffner.ch
Taiwan
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Taipei City 114
T +886 2 87525050
F +886 2 87518086
taiwansales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffner.com/us
To find your local partner within
Schaffner‘s global network, please go to
www.schaffner.com
Order Nr. 611445 Merkur Druck AG
August 2012
© 2012 Schaffner Group
Specifications are subject to change
within notice. The latest version of the
data sheets can be obtained from the
website. All trademarks recognized.
Schaffner is an ISO-registered company.
Its products are designed and
manufactured under the strict quality
and environnmental requirements of
the ISO 9001 and ISO 14001 standards.
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or
inaccuracies.
