48.26mm [1.900"] 2.54mm typ. [0.100"] 48.26mm [1.900"] Top View 20.89mm [0.823"] 3 1 32.73mm Assembled [1.289"] 6.03mm [0.237"] 2 1.27mm [0.050"] Side View 1 Substrate: 1.59mm 0.18mm [0.0625" 0.007"] FR4/G10 or equivalent high temp material. 17m [1/2 oz.] Cu clad. SnPb plating. 2 Leads: material- BeCu Alloy 194; plating- 60/40 SnPb 3.80-10.16m [150-400"]. 3 Test points: material- Phosphor Bronze; plating- Sn over 1.27m [50"] Ni. Gold flash on contact end. 23.77mm [0.936"] Description: Carrier Adaptor 2 piece pluggable adaptor, PLCC ZIF socket with test probe to surface mountable PLCC emulator foot. Tolerances: diameters 0.03mm [0.001"], PCB perimeters 0.13mm [0.005"], PCB thicknesses 0.18mm [0.007"], pitches (from true position) 0.08mm [0.003"], all other tolerances 0.13mm [0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CA-PLCC068-Z-J-T-01 Drawing (c) 1994 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: M. Lund File: CA-PLCC068-Z-J-T-01 Dwg Scale: 2:1 Rev: D Date: 8/16/94 Modified:8/30/00