DATA SHEET SILICON TRANSISTOR 2SC4955 HIGH FREQUENCY LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR MINI MOLD FEATURES * Low Noise, High Gain PACKAGE DIMENSIONS * Low Voltage Operation in millimeters * Low Feedback Capacitance 2.80.2 +0.1 0.4 -0.05 Cre = 0.4 pF TYP. +0.1 1.5 0.65 -0.15 3 Kpcs/Reel. Embossed tape 8 mm wide. Pin1 (Emitter), Pin2 (Base) face to perforation side of the tape. 3 +0.1 2SC4955-T2 1 0.4 -0.05 Embossed tape 8 mm wide. Pin3 (Collector) face to perforation side of the tape. 0.3 Marking * To order evaluation samples, contact your nearby sales office. +0.1 3 Kpcs/Reel. 0.16 -0.06 2SC4955-T1 PACKING STYLE 0.95 QUANTITY 2 1.1 to 1.4 PART NUMBER 0.95 2.90.2 ORDERING INFORMATION 0 to 0.1 Unit sample quantity shall be 50 pcs. (Part No.: 2SC4955) ABSOLUTE MAXIMUM RATINGS (TA = 25 C) Collector to Base Voltage VCBO 9 V Collector to Emitter Voltage VCEO 6 V PIN CONNECTIONS Emitter to Base Voltage VEBO 2 V 1. Emitter 2. Base 3. Collector Collector Current IC 30 mA Total Power Dissipation PT 180 mW Junction Temperature Tj 150 C Storage Temperature Tstg -64 to +150 C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PU10038EJ01V0DS (1st edition) (Previous No. P10377EJ2V0DS00) Date Published October 2001 CP(K) Printed in Japan The mark shows major revised points. NEC Corporation 1993 NEC Compound Semiconductor Devices 2001 2SC4955 ELECTRICAL CHARACTERISTICS (TA = 25 C) CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Collector Cutoff Current ICBO 0.1 A VCB = 5 V, IE = 0 Emitter Cutoff Current IEBO 0.1 A VEB = 1 V, IC = 0 DC Current Gain hFE 75 Gain Bandwidth Product fT 12 Feed-back Capacitance Cre 0.4 Insertion Gain |S21e|2 Noise Figure NF 7 VCB = 3 V, IC = 10 mA*1 150 GHz 0.7 8.5 1.5 2.5 VCE = 3 V, IC = 10 mA pF VCB = 3 V, IE = 0, f = 1 MHz*2 dB VCE = 3 V, IC = 10 mA, f = 2.0 GHz dB VCE = 3 V, IC = 3 mA, f = 2.0 GHz *1 Pulse Measurement; PW 350 s, Duty Cycle 2 % Pulsed. *2 Measured with 3 terminals bridge, Emitter and Case should be grounded. hFE Classification Rank T83/FB* Marking T83 hFE 75 to 150 * Old Specification/New Specification TYPICAL CHARACTERISTICS (TA = 25 C) TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE Free Air 200 IC - Collector Current - mA PT - Total Power Dissipation - mW 50 180 mW 100 0 50 100 150 VCE = 3 V 40 30 20 10 0 TA - Ambient Temperature - C 2 0.5 VBE - Base to Emitter Voltage - V Data Sheet PU10038EJ01V0DS 1.0 2SC4955 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE DC CURRENT GAIN vs. COLLECTOR CURRENT 60 200 50 400 A 40 300 A 30 200 A 20 IB = 100 A hFE - DC Current Gain IC - Collector Current - mA 500 A 5V VCE = 3 V 100 10 0 1 2 3 4 5 0 0.1 0.2 6 0.5 3V 10 8 VCE = 1 V 6 4 |S21e|2 - Insertion Power Gain - dB fT - Gain Bandwidth Product - GHz 5V 50 100 f = 2 GHZ 5V 10 3V VCE = 1 V 8 6 4 1 2 5 10 20 1 50 2 5 10 20 IC - Collector Current - mA IC - Collector Current - mA NOISE FIGURE vs. COLLECTOR CURRENT FEED-BACK CAPACITANCE vs. COLLECTOR TO BASE VOLTAGE 50 0.5 4 Cre - Feed-back Capacitance - pF f = 2 GHZ VCE = 3 V NF - Noise Figure - dB 10 20 12 f = 2 GHZ 12 3 2 1 0 0.5 5 INSERTION GAIN vs. COLLECTOR CURRENT GAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENT 2 0.5 2 IC - Collector Current - mA VCE - Collector to Emitter Voltage - V 14 1 1 2 5 10 20 50 IC - Collector Current - mA f = 1 MHZ 0.4 0.3 0.2 0.1 0.5 1 2 5 10 20 VCB - Collector to Base Voltage - V Data Sheet PU10038EJ01V0DS 3 2SC4955 S-PARAMETER (VCE = 3 V, IC = 1 mA, ZO = 50 ) FREQUENCY (GHz) S11 MAG S21 S12 S22 ANG MAG ANG MAG ANG MAG ANG 0.200 0.9400 -15.3 3.4560 165.0 0.0420 76.0 0.9780 -8.7 0.400 0.8770 -29.0 3.1870 149.2 0.0800 71.7 0.9490 -16.0 0.600 0.8020 -43.6 3.0390 136.4 0.1140 63.8 0.8910 -23.4 0.800 0.7030 -55.3 2.8000 123.9 0.1340 56.7 0.8280 -29.1 1.000 0.6240 -67.2 2.5890 113.1 0.1520 52.2 0.7630 -33.7 1.200 0.5570 -79.0 2.4320 102.9 0.1690 49.0 0.7170 -37.9 1.400 0.4670 -89.9 2.2140 94.7 0.1810 45.6 0.6940 -41.8 1.600 0.4130 -99.8 2.0430 86.9 0.1880 45.2 0.6450 -43.9 1.800 0.3680 -108.1 1.8790 79.0 0.1910 43.0 0.6050 -46.2 2.000 0.3140 -120.9 1.7720 73.0 0.1990 44.3 0.5860 -50.5 2.200 0.2690 -137.1 1.7010 66.9 0.2140 45.9 0.5600 -53.7 2.400 0.2740 -147.6 1.6030 61.4 0.2170 44.2 0.5520 -54.5 2.600 0.2530 -157.0 1.5010 57.1 0.2270 46.9 0.5260 -58.3 2.800 0.2200 -175.7 1.4330 51.6 0.2460 46.7 0.5160 -61.4 3.000 0.2130 173.7 1.3860 47.5 0.2500 48.9 0.4870 -64.7 ANG MAG ANG MAG ANG MAG ANG -24.9 8.5180 154.3 0.0410 77.4 0.9240 -14.9 (VCE = 3 V, IC = 3 mA, ZO = 50 ) FREQUENCY 4 S11 (GHz) MAG 0.200 0.8160 S21 S12 S22 0.400 0.6610 -42.6 6.9310 133.1 0.0680 67.4 0.8190 -24.8 0.600 0.5300 -58.7 5.7770 118.4 0.0900 64.1 0.7120 -31.7 0.800 0.4090 -69.1 4.8150 106.7 0.1070 61.2 0.6430 -34.3 1.000 0.3280 -79.6 4.1130 97.3 0.1250 62.3 0.5820 -36.7 1.200 0.2670 -88.9 3.6270 89.7 0.1440 58.4 0.5300 -38.1 1.400 0.2080 -98.5 3.1680 83.4 0.1570 57.1 0.5100 -40.9 1.600 0.1800 -108.0 2.8600 77.1 0.1680 58.4 0.4870 -41.6 1.800 0.1300 -112.7 2.5690 71.9 0.1870 57.7 0.4550 -42.6 2.000 0.0970 -132.3 2.3660 66.9 0.2030 56.7 0.4490 -45.7 2.200 0.0830 -156.8 2.2340 62.7 0.2230 55.3 0.4250 -50.3 2.400 0.1010 -167.1 2.0840 57.4 0.2450 56.3 0.4270 -48.0 2.600 0.0840 169.7 1.9230 54.3 0.2540 56.5 0.4120 -55.0 2.800 0.0950 156.3 1.8400 49.5 0.2760 54.9 0.3850 -58.0 3.000 0.1010 126.6 1.7450 46.5 0.2930 52.0 0.3650 -59.7 Data Sheet PU10038EJ01V0DS 2SC4955 S-PARAMETER (VCE = 3 V, IC = 5 mA, ZO = 50 ) FREQUENCY (GHz) S11 S21 MAG ANG MAG S12 ANG S22 MAG ANG MAG ANG 0.200 0.7170 -30.9 11.5670 147.4 0.0340 77.4 0.8840 -18.6 0.400 0.5230 -48.6 8.6210 124.7 0.0630 68.1 0.7490 -28.2 0.600 0.4020 -64.1 6.7610 110.7 0.0840 67.1 0.6190 -32.6 0.800 0.2860 -71.9 5.4360 100.2 0.0970 62.7 0.5560 -34.2 1.000 0.2270 -77.9 4.5550 91.8 0.1110 65.0 0.5030 -35.0 1.200 0.1830 -85.3 3.9560 85.3 0.1380 63.9 0.4750 -36.8 1.400 0.1280 -95.6 3.4140 79.5 0.1600 62.8 0.4630 -38.5 1.600 0.1080 -105.1 3.0630 74.3 0.1800 62.2 0.4440 -38.5 1.800 0.0680 -113.1 2.7510 69.4 0.1920 61.5 0.4240 -38.5 2.000 0.0370 -131.4 2.5150 64.9 0.2190 60.4 0.4100 -44.3 2.200 0.0410 171.2 2.3620 60.5 0.2310 59.8 0.3850 -49.2 2.400 0.0480 170.0 2.2000 56.8 0.2460 57.9 0.3960 -45.0 2.600 0.0540 146.9 2.0470 53.7 0.2700 56.4 0.3650 -54.6 2.800 0.0760 127.6 1.9320 49.2 0.2980 56.3 0.3790 -55.9 3.000 0.0900 111.8 1.8520 45.8 0.3190 52.5 0.3160 -61.2 ANG MAG ANG MAG ANG MAG ANG -38.9 15.738 136.5 0.035 73.8 0.789 -22.9 (VCE = 3 V, IC = 10 mA, ZO = 50 ) FREQUENCY S11 (GHz) MAG 0.200 0.542 S21 S12 S22 0.400 0.348 -53.6 10.350 114.2 0.058 66.8 0.626 -29.9 0.600 0.247 -62.6 7.604 102.2 0.075 70.8 0.529 -31.7 0.800 0.168 -70.7 5.939 93.4 0.094 69.1 0.474 -30.9 1.000 0.120 -73.9 4.899 86.4 0.106 69.3 0.457 -31.3 1.200 0.091 -79.6 4.218 81.0 0.138 68.3 0.427 -33.1 1.400 0.060 -85.7 3.615 76.0 0.160 66.9 0.407 -34.6 1.600 0.041 -97.8 3.244 71.5 0.179 65.2 0.408 -35.2 1.800 0.016 -68.1 2.884 66.9 0.200 66.8 0.383 -38.5 2.000 0.017 54.7 2.625 63.0 0.217 62.8 0.375 -39.4 2.200 0.040 109.0 2.480 59.0 0.238 62.1 0.361 -45.8 2.400 0.053 114.8 2.291 55.5 0.262 58.2 0.356 -42.6 2.600 0.054 97.4 2.139 52.6 0.289 59.3 0.337 -51.4 2.800 0.084 99.5 1.995 47.9 0.292 54.8 0.326 -49.9 3.000 0.108 87.6 1.917 45.4 0.331 54.4 0.274 -58.4 Data Sheet PU10038EJ01V0DS 5 2SC4955 * The information in this document is current as of October, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 6 Data Sheet PU10038EJ01V0DS 2SC4955 Business issue NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-3-3798-6372 FAX: +81-3-3798-6783 E-mail: salesinfo@csd-nec.com NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-528-0302 TEL: +82-2-528-0301 NEC Electron Devices European Operations http://www.nec.de/ TEL: +49-211-6503-101 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Technical issue NEC Compound Semiconductor Devices, Ltd. http://www.csd-nec.com/ Sales Engineering Group, Sales Division E-mail: techinfo@csd-nec.com FAX: +81-44-435-1918 0110