25.4mm (1.0 INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA10-21SURKWA Hyper Red Features Description z 1.0 inch digit height. The Hyper Red source color devices are made with Al- z Low current operation. GaInP on GaAs substrate Light Emitting Diode. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 1 OF 7 DRAWN: Y.Liu ERP: 1301002694 Selection Guide Part No. Dice SA10-21SURKWA Iv (ucd) [1] @ 10mA Lens Type Hyper Red (AlGaInP) Min. Typ. 88000 260000 *31000 *70000 White Diffused Description Common Anode, Rt. Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 645 nm IF=20mA Hyper Red 630 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Hyper Red 3.9 (1.95) 5.0 (2.5) V IF=20mA IR Reverse Current (Per chip) Hyper Red 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation (DP) 150 (75) mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 (5) V Reverse Voltage (Per chip) Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 2 OF 7 DRAWN: Y.Liu ERP: 1301002694 Hyper Red SPEC NO: DSAM8410 APPROVED: WYNEC SA10-21SURKWA REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 3 OF 7 DRAWN: Y.Liu ERP: 1301002694 SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 4 OF 7 DRAWN: Y.Liu ERP: 1301002694 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee SA10-21SURKWA DATE: APR/12/2013 PAGE: 5 OF 7 DRAWN: Y.Liu ERP: 1301002694 SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 6 OF 7 DRAWN: Y.Liu ERP: 1301002694 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM8410 APPROVED: WYNEC REV NO: V.1A CHECKED: Joe Lee DATE: APR/12/2013 PAGE: 7 OF 7 DRAWN: Y.Liu ERP: 1301002694 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: SA10-21SURKWA