PANEL SWITCHES 6 -2 SW 05 18 00 2600 series Power rocker switches DISTINCTIVE FEATURES Three rocker shapes : plain, V-shaped or concave Various rocker colors Frame with protection guard on 2600LP models Illuminated or non-illuminated UL, CSA, VDE and NF (EN 61058-1) approved ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load and approved ratings : see table below. * Initial contact resistance : 10 m max. * Insulation resistance : 1,000 M min. at 500 VDC * Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and metal panel * Electrical life : 10,000 cycles at full load DIRECT CURRENT APPROVED RATINGS Functions ON - OFF ON - ON ON - OFF - ON CSA (double pole) UL (double pole) VDE NF CSA 22-2 UL 1054 EN 61058-1 EN 61058-1 1/6 HP 125 VAC 16 A 125 VAC 16 A 250 VAC 1/3 HP 250 VAC 1/6 HP 125 VAC 16 A 125 VAC 16 A 250 VAC 1/3 HP 250 VAC 10(4) A 250 VAC T 85/55 10 A 125 VAC 10 A 125 VAC L I option 10 A 250 VAC 10 A 250 VAC 10(4) A 250 VAC 1/6 HP 125/250 VAC 1/6 HP 125/250 VAC 24 VDC 12 VDC - 10 A 15 A L I option 10(4) A 250 VAC 8A 10 A ON - ON - ON - - - - 5A 8A OTHERS 10 A 125 VAC 10 A 250 VAC 1/6 HP 250 VAC - L I option 10(4) A 250 VAC L I option 10(4) A 250 VAC 8A 10 A GENERAL SPECIFICATIONS * Panel thickness : 0.8 mm to 4 mm (.031 to .157) * Operating temperature : - silver contacts (A) : -20 C to +85 C (-4 F to +185 F) - silver plated contacts (C) : -10 C to +55 C (+14 F to +131 F) The company reserves the right to change specifications without notice. 1 Power rocker switches MATERIALS ELECTRICAL FUNCTIONS * Case : melamine/polyester * Frame : polyamide * Actuator : polyamide * Contacts : A : silver C : copper, silver plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. AGENCY APPROVALS PANEL CUT-OUT EN 61058-1 EN 61058-1 Availability : consult factory for details of approved models. Marking : approved models are standard marked. TERMINALS O3.00x0.50 SI (.118DIAx0.50 IS) 0.80 (.031) 6.35 (.25) Screw O &+# Z Z Normalized quick-connect 2 O3.10 (.122DIA) 4.50 (.177) PANEL SWITCHES 2600 series 6.35x0.80 (.25x.031) Solder lug / quick-connect Power rocker switches BUILD YOUR PART NUMBER BASIC PART NUMBER 26 SERIES TERMINALS ELECTRICAL FUNCTIONS NUMBER OF POLES 3 Single pole 1 ON - 4 Double pole 4 ON ON 5 MOM - ON 6 ON - ON OFF ON 7 MOM OFF MOM (none) Screw + clamp 8 ON OFF MOM /2 9 ON OFF ON Solder lugs / quick-connect /3 Normalized quick-connect FRAME TYPE double pole only LH Plain LP With protection guard OPTIONS ROCKER SHAPES FRAME COLORS ILLUMINATED WINDOW ROCKER MARKING 1 dark blue 1 Plain 00 00 2 black (standard) 2 V-shaped 01 21 4 grey 3 Concave 07 27 7/1 white 08 28 (none) ON /3 green /6 red With green, use fluorescent lamp only. OFF Complete table at the end of the series. LAMPS 8 chrome plated B light brown L0 E dark brown L6V 6 V filament lamp L12V 12 V filament lamp L24V 24 V filament lamp L110V 110 VAC neon lamp ROCKER COLORS CONTACT MATERIALS A Silver C Copper, silver plated (functions 1, 6 and 9 only) Illuminated rocker (without window) 0 Without rocker 1 blue 3 Non-illuminated rocker or rocker with illum. window * Without rocker 30 green * 02 light brown 40 grey green 04 dark brown 50 yellow 5 yellow 03 beige 60 red * 6 red 10 blue 70 white white 14 dark blue 90 orange orange 20 black * 7/1 9 0 With green or blue rocker, use fluorescent lamp only. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Without lamp L110V1 110 VAC blue fuor. lamp L110V3 110 VAC green fuor. lamp L220V 220 VAC neon lamp L220V1 220 VAC blue fuor. lamp L220V3 220 VAC green fuor. lamp L I OPTION LI EN 61058-1 approved version, without lamp (3 position switches) 3 PANEL SWITCHES 2600 series Power rocker switches 2631LH/2 ON - OFF 2635LH 2635LH/2 MOM - ON 2636LH 2636LH/2 ON - ON 2637LH 2637LH/2 MOM OFF MOM 2638LH 2638LH/2 ON OFF MOM 2639LH 2639LH/2 ON OFF ON 11.00 (.433) 9.00 (.354) 17.00 (.669) 11.10 (.437) 18.50 (.728) A1 A2 32.00 (1.259) 2631LH 25.00 (.984) I A2-A3 14.70 (.578) II A3 6.80 (.267) Screw term. Solder lug/ + clamp quick-connect III A2-A1 6.35x0.80 (.25x.031) Shown with plain rocker 2600LH - SINGLE POLE 2.00 (.078) 25.00 (.984) 2641LH/2 2644LH/2* ON 2645LH 2645LH/2 MOM 2646LH 2646LH/2 ON 2647LH 2647LH/2 MOM OFF MOM 2648LH 2648LH/2 ON OFF MOM 2649LH 2649LH/2 ON OFF ON ON - OFF ON ON - ON - ON 9.00 (.354) A1 B4 A2 A3 B5 B6 17.00 (.669) 11.10 (.437) 18.50 (.728) 2.00 (.078) 25.00 (.984) 2641LH 2644LH* 11.00 (.433) 32.00 (1.259) I A2-A3 B5-B6 14.70 (.578) II 6.80 (.267) Screw term. Solder lug/ + clamp quick-connect III A2-A1 B5-B4 6.35x0.80 (.25x.031) 2600LH - DOUBLE POLE 25.00 (.984) 2600LP - WITH PROTECTION GUARD SINGLE POLE OFF - ON 2636LP 2636LP/2 ON - ON 2637LP 2637LP/2 MOM OFF MOM 2638LP 2638LP/2 ON OFF MOM 2639LP 2639LP/2 ON OFF ON 2600LP - WITH PROTECTION GUARD DOUBLE POLE III Screw term. Solder lug/ + clamp quick-connect A2-A1 B5-B4 2641LP 2641LP/2 2644LP* 2644LP/2* ON 2645LP 2645LP/2 2646LP ON II A1 A2 A3 2.00 (.078) I A2-A3 B5-B6 - OFF ON ON MOM - ON 2646LP/2 ON - ON 2647LP 2647LP/2 MOM OFF MOM 2648LP 2648LP/2 ON OFF MOM 2649LP 2649LP/2 ON OFF ON 18.50 (.728) 11.00 (.433) 10.00 (.393) A1 B4 A2 A3 B5 B6 17.00 (.669) 11.10 (.437) 2.00 (.078) 32.00 (1.259) - MOM 11.10 (.437) 32.00 (1.259) ON 2635LP/2 17.00 (.669) 25.00 (.984) 2631LP/2 2635LP 10.00 (.393) 25.00 (.984) 2631LP 11.00 (.433) 14.70 (.578) I A2-A3 6.80 (.267) II 6.35x0.80 (.25x.031) III A2-A1 25.00 (.984) 18.50 (.728) 14.70 (.578) Screw term. Solder lug/ + clamp quick-connect 6.35x0.80 (.25x.031) *Function 4 : SP in DP case, see "Technical information" on website. 6.80 (.267) PANEL SWITCHES 2600 series 25.00 (.984) *Function 4 : SP in DP case, see "Technical information" on website. 4 Power rocker switches TERMINAL OPTION O &+# Specify after LH or LP. /3 Normalized quick-connect terminals 6.35 x 0.8 (.250 x .031) Z Z CONTACT MATERIALS BASIC P/N A C Silver Copper, silver plated (available with functions 1, 6 and 9 only) FRAME COLORS BASIC P/N 1 2 4 7/1 8 B E Dark blue Black (standard) Grey White Chrome plated Light brown Dark brown Chrome plated option has UL approval only. ROCKER SHAPES BASIC P/N 1 2 3 Plain V-shaped Concave 1 2 3 ROCKER COLORS BASIC P/N FOR ILLUMINATED SWITCHES 0 Without rocker Plain rocker P/N V-shaped rocker P/N Concave rocker P/N - - - 1 Blue* U881 U861 U871 3 Green* U883 U863 U873 5 Yellow U885 U865 U875 6 Red U886 U866 U876 7/1 White U887 U867 U877 9 Orange U889 U869 U879 * With green or blue rocker, use fluorescent lamp only. Complete box with one of above color codes in bold. To order rockers separately, use their P/N (U....) and complete box with code 0. 5 PANEL SWITCHES 2600 series Power rocker switches ROCKER COLORS (CONTINUED) BASIC P/N FOR NON-ILLUMINATED SWITCHES OR SWITCHES WITH ILLUMINATED WINDOW (*) Plain rocker P/N V-shaped rocker P/N Concave rocker P/N - - - 0 Without rocker 02 Light brown U1250B U1270B U1260B 04 Dark brown U1250BF U1270BF U1260BF 03 Beige U1250 U1270 U1260 10 Blue 14 Dark blue 20 * U1251 U1271 U1261 U1251/4 U1271/4 U1261/4 Black U1252 U1272 U1262 30 * Green U1253 U1273 U1263 40 Grey U1254 U1274 U1264 50 Yellow U1255 U1275 U1265 60 * Red U1256 U1276 U1266 70 White U1257 U1277 U1267 90 Orange U1259 U1279 U1269 Complete box with one of above color codes in bold. To order rockers separately, use their P/N (U....) and complete box with code 0. Rockers with illuminated windows (codes 20, 30, 60) : part numbers on request. ROCKER MARKING BASIC P/N MARKING 4 1 4 1 4 1 4 1 4 1 4 OFF COLOR Black 5 2 2 5 2 5 2 5 3 2 5 2 2 3 01 6 3 02 6 3 06 6 3 07 6 3 08 Red 00 11 12 16 17 18 White 00 21 22 26 27 28 6 4 5 5 4 6 STOP ON 6 00 5 1 STOP 6 3 03 1 1 4 1 4 1 4 1 2 5 2 5 2 5 2 3 6 3 6 3 6 3 04 05* 40 43* 46 13 14 15* 41 44* 47 23 24 25* 42 45* 48 C26RM/A * Not available on V-shaped rockers Special markings and marking on rockers with illuminated window : consult factory. C26RM 6 STOP PANEL SWITCHES 2600 series Power rocker switches LAMPS BASIC P/N L0 Non-illuminated switch L6V Filament lamp 6 V L12V Filament lamp 12 V L24V Filament lamp 24 V L110V Neon lamp 110 VAC B4 B5 A1 A2 For illuminated models, the lamp is always connected between center terminals 2 and 5. L110V1 BLUE fluorescent lamp 110 VAC L110V3 Green fluorescent lamp 110 VAC L220V Neon lamp 220 VAC L220V1 BLUE fluorescent lamp 220 VAC L220V3 Green fluorescent lamp 220 VAC LI EN61058-1 approved version without lamp (3 position switches) ILLUMINATED WINDOW BASIC P/N For black, green and red rockers only. /3 /6 Green Red o (.19 5.00 7 DI A) With green, use fluorescent lamp only. No marking available on illuminated windows. 7 PANEL SWITCHES 2600 series