LightCrimp Plus Optical Fiber Connectors & Accessories System Overview AMP NETCONNECT Optical Fiber Terminations In Less Than a Minute Key Features * Quick and easy fiber termination process With AMP NETCONNECT LightCrimp Plus optical fiber connectors from CommScope you can terminate optical fibers for premises cabling and fiber-to-the-desk applications in less than a minute. * Terminations take under a minute * Easy termination procedure * No polishing needed: simply strip and cleave the fiber, then crimp the connector * Factory-polished to a consistent, high-quality end finish - ensures reliable physical contact and eliminates return loss concerns * No need for epoxy, curing ovens or electricity * LC, SC and ST-Style connectors * No set-up required, ideal for low fiber count installs * No workstation required * Lowest applied labor costs * Exceeds connectors performance requirements of ANSI/TIA-568-C.3 * Same tool kit for single-mode and multimode terminations AMP NETCONNECT LightCrimp Plus optical fiber connectors use CommScope's crimp technology to make fiber optic terminations a quick, clean and simple mechanical process. Only a few tools, and in most circumstances, little training are required. With LightCrimp Plus optical fiber products, you can terminate fibers without epoxy, polishing papers, ovens, UV lamps, or electrical power for field termination tooling. Convenient side latches allow you to remove module covers without removing the base from the mounting surface. This speeds MACs (Moves, Adds and Changes) without needing to unplug existing, active connections. For facilities requiring additional security in work areas and classroom environments, the cover can be screwed shut to prevent unauthorized access. Pre-scored knockouts allow compatibility with most surface mount raceway systems as well as modular furniture raceways. 1 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories Surface Mount Modules and Accessories G E A B C D F Key Features * No epoxy, no polish, no curing * Ceramic ferrules * Little or no setup or tear-down time * Three step termination: Strip, cleave, crimp * Compliant with ANSI/TIA-568-C.3 * * Easiest and quickest fiber termination available * Factory polished for high consistency LC and SC Duplex clips join two simplex connectors creating one duplex connector Connector Type LC Simplex Fiber Type Single-mode, UPC Blue Blue Single-mode, APC Green Blue XG Multimode, 50 m Beige Aqua Multimode, 50 m LC Duplex SC Duplex Beige Figure Part Numbers 900 m buffered and 250 m coated fibers A 6754482-1 B 2064181-1 1.6 to 2.0 mm Jacketed Cable 1918626-1 900 m buffered and 250 m coated fibers 900 m buffered and 250 m coated fibers Black 6754483-4 1.6 to 2.0 mm Jacketed Cable 1918627-3 900 m buffered and 250 m coated fibers 6754483-2 1.6 to 2.0 mm Jacketed Cable 1918627-2 C 900 m buffered and 250 m coated fibers 6754483-1 Beige Beige Single-mode, UPC Blue Blue 900 m buffered and 250 m coated fibers 6754484-1 XG Multimode, 50 m Beige Aqua 900 m buffered and 250 m coated fibers 6754485-4 1.6 to 2.0 mm Jacketed Cable 1918627-1 Multimode, 50 m Beige Black 900 m buffered and 250 m coated fibers 6754485-2 Multimode, 62.5 m Beige Beige 900 m buffered and 250 m coated fibers 6754485-1 D Black Simplex LightCrimp Plus LC Connectors (6 clips per pack) Blue Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-4 Beige Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-5 E 1754371-1 Single-mode, UPC Blue Blue 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable Single-mode, APC Green Blue 900 m buffered and 250 m coated fibers 2064184-1 XG Multimode, 50 m Beige Aqua 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6588291-2 Multimode, 50 m Beige Black 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6278079-2 Multimode, 62.5 m Beige Beige 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 5492643-1 Single-mode, UPC Blue Blue 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6693278-1 XG Multimode, 50 m Beige Aqua 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6588292-2 Multimode, 50 m Beige Black 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6278080-2 Multimode, 62.5 m Beige Beige 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable Duplex Clip, SC 6693276-1 6278009-1 F Black Simplex LightCrimp Plus SC Connectors (1 set per pack) Green Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-2 Blue Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-3 Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-4 Beige ST For Use With Multimode, 62.5 m Duplex Clip, LC SC Simplex Housing Color Boot Color 6348522-1 Single-mode, UPC Metallic Black 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 1828953-3 XG Multimode, 50 m Metallic Aqua 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 6278082-2 Multimode, 50 m Metallic Black 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable Multimode, 62.5 m Metallic Beige 900 m buffered fibers, 250 m coated fibers, and 3mm Jacketed Cable 2 G 6278082-1 5492642-2 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories LightCrimp Plus Termination Tool Kits and Accessories Terminates: Description LightCrimp Plus LC Universal No-epoxy/No-polish Termination Kit LightCrimp Plus LC/SC Connector Termination Kit LightCrimp Plus ST Connector Termination Kit Deluxe Premise Termination Kit LightCrimp Plus Combination Adaptive Termination Kit LightCrimp Plus LC/SC Adaptive Termination Kit LightCrimp Plus ST Adaptive Termination Kit LC Connector Upgrade Termination Kit SC X X X X X X X X X X ST X LightCrimp SC ST ALL MT-RJ X Part Numbers 1278118-4 1754845-1 X X X 492697-1 X X X 1278949-2 1754739-2 1754846-1 X 1754738-1 Adds functionality to terminate LightCrimp Plus LC Connectors To Other Adaptive Tool Kits 1754847-2 Key Features * Adaptive tool kits are a cost-effective, upgradable solution, if common fiber and cable preparation tools are already available. * Termination tool kits come with a high quality, soft carrying case and are equipped with all the necessary tools required to terminate the listed, field installable connectors. * All kits come with LightCrimp Plus connector termination instructions and instructional CD-ROM. The CD-ROM is also available separately by requesting part number 1374503-1. Please contact your local sales engineer to request your copy, or call our customer service department at 800-553-0938. Deluxe Premise Termination Tool Kit 3 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories 1754847-2 1754739-2 1 1 1 2 - 1 1 1 2 1 1 1 1 2 - 1 1 1 2 - 1 1 1 - - - - - - 2 2 2 1 1 1 - - 2 - 2064603-1 1 - - - - - - - 492623-1 - - 1 - - - - - 492782-1 - - - 1 - - - - 1754136-1 492622-1 - 1 - - - - 1 1 - 1 - - - 1 1 - 1985766-1 - 1 - - 1 1 - - 492783-1 2064540-1 1754138-1 1278023-1 492703-1 501857-2 501198-1 492109-2 1278576-1 1278598-1 1374331-1 1374503-1 2064710-1 1457999-1 1871696-1 2064453-2 1278625-1 1754767-1 1754768-1 1754765-1 503705-1 503574-1 503694-1 501197-1 504584-1 501523-1 228433-5 228433-8 503304-1 503304-2 502631-1 501014-1 - 1 - - 1 14 1 1 2 1 1 1 1 1 1 1 1 - - - - - - - - - - - - - - - - 1 - - - 14 - 1 - - - 1 1 - 1 1 1 - - - - - - - - - - - - - - - - - - - 1 14 - - - - - 1 1 - 1 - - - - - - - - - - - - - - - - - - - 1 1 1 14 - 1 2 1 - 1 1 1 1 - 1 - - - 1 1 1 1 1 1 10 10 1 1 5 1 1 1 - 1 1 - - - - - - 1 1 - 1 - - - - - - - - - - - - - - - - - - - - - 1 - - - - - - 1 1 - 1 - - - - - - - - - - - - - - - - - - - 1 - - - - - - - - - - - - - 1 - - - - - - - - - - - - - - 1 - 1 - - - - - - - - - 1 1 - 1 1 1 - - - - - - - - - - - - - - - 1754738-1 1278949-2 1278540-1 1754708-1 1278637-1 1278422-1 2064431-1 Part Number 1754846-1 492697-1 Premium, soft shell, carrying case Strip tool, fiber combination KEVLAR shears Wrench, 1/4 inch, open end PRO-CRIMPER III Hand Tool PRO-CRIMPER III Hand Tool with die set for LightCrimp Plus LC and SC Connectors PROCRIMPER III Hand Tool with die set for LightCrimp Plus ST Connectors PROCRIMPER III Hand Tool with die set for LightCrimp and LightCrimp Plus SC Connectors LightCrimp Plus LC die set for PROCRIMPER III Hand Tool LightCrimp Plus ST die set for PROCRIMPER III Hand Tool LightCrimp Plus LC and SC die set for PROCRIMPER III Hand Tool LightCrimp Plus SC die set for PROCRIMPER III Hand Tool LightCrimp Plus LC and SC cable/buffer holder LightCrimp Plus LC cable/buffer holder LightCrimp Plus SC cable/buffer holder LightCrimp Plus ST cable/buffer holder Alcohol fiber wipe OPTIMATE cable stripper Micro-stripper, MT-RJ Actuation key, MT-RJ Strip Template, MT-RJ Label, termination kit CD-ROM, termination training Fiber Optics Cleaning and Inspection Guide Ball end hex key (5) Fiber cleaver, slide cutter Cable Slitter, 2 mm Cable Clamp 200x Microscope Kit 200x Microscope Adapter, MT-RJ 200x Microscope Adapter, 1.25 mm LightCrimp Cleave Tool LightCrimp ST Strip Template LightCrimp SC Strip Template Polishing Plate, 8.5 x 11 inches Polishing Pad, Rectangular Polishing Pad, Circular Polishing Film, 0.3 m Polishing Film, 0.5 m LightCrimp ST Polishing Bushing, Black LightCrimp ST Polishing Bushing, Beige LightCrimp SC Polishing Bushing Scissors 1754845-1 Description 1278118-4 Kit Contents and Quantities Pre-polished Connectors Since AMP NETCONNECT LightCrimp Plus connectors are factory polished, all you have to do is strip cable, prepare and cleave the fiber, and crimp the connector. There is no setup time required and you get a more consistent, high quality end-face finish. When compared to epoxy/hand polished connectors. LightCrimp Plus Connectors Are Rugged LightCrimp Plus connectors offer consistent polish, crimp quality, and long term performance that's on par with standard epoxy style connectors. LightCrimp Plus connectors meet or exceed the relevant ANSI/TIA, IEC, and EN optical and mechanical specifications and operate in temperatures ranging from -10 to +60 C. Tool Kit Upgrades The tooling used to crimp LightCrimp Plus connectors can also be used with LightCrimp connectors. For existing users of LightCrimp or other, pre-polished connectors, CommScope offers upgrade tool kits to make the transition to LightCrimp Plus connectors easier and more cost effective. Performance Characteristics LightCrimp Plus connectors have been tested per industry FOTPs (Fiber Optic Test Procedures) and meet or exceed all requirements in the Connector Performance Specification Annex of ANSI/TIA-568-C. LightCrimp Plus connectors utilize ceramic ferrules and yield terminations with typical Insertion Loss of 0.2 dB for single-mode, and 0.3 dB for multimode. www.commscope.com Visit our website or contact your local CommScope representative for more information. (c) 2015 CommScope, Inc. All rights reserved. LightCrimp Plus, AMP NETCONNECT, PRO-CRIMPER, OPTIMATE and all trademarks identified by (R) or TM are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS-313912-AE (12/15)