Product data sheet
Characteristics
ZB5AA791
flush/red projecting/flush triple-headed pushbutton
Ø22 without cap
Product availability : Non-Stock - Not normally stocked in distribution facility
Price* : 48.50 USD
Main
Range of product Harmony XB5
Product or component type Head for triple-headed push-button
Device short name XB5
Bezel material Dark grey plastic
Mounting diameter 0.87in (22mm)
Head type Standard
Shape of signaling unit head Rectangular
Type of operator spring return
Operator profile 2 flush - 1 central projecting STOP push-buttons
Operators description Black pushes without cap
Complementary
CAD overall width 1.18in (30mm)
CAD overall height 1.97in (50mm)
CAD overall depth 1.38in (35mm)
Net Weight 0.05lb(US) (0.023kg)
Resistance to high pressure washer 7000000Pa at 55°C, distance : 0.1 m
Colour of marking Black marking when white caps
White marking when green, red or black caps
Operator profile without cap
Red projecting
Mechanical durability 1000000cycles
Station name XALD 1 cut-out
Electrical composition code C1 for <9 contacts using single blocks in front mounting
C2 for <9 contacts using single and double blocks in front mounting
C11 for <3 contacts using single blocks in front mounting
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
*Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Feb 8, 2021
1
SF1 for <3 contacts using single blocks in front mounting
SR1 for <3 contacts using single blocks in rear mounting
Device presentation Basic element
Environment
Ambient air temperature for storage -40…158°F (-40…70°C)
Ambient air temperature for operation -13…158°F (-25…70°C)
Electrical shock protection class Class II conforming to IEC 61140
IP degree of protection IP67 conforming to IEC 60529
IP69 conforming to IEC 60529
IP69K
NEMA degree of protection NEMA 13
NEMA 4X
IK degree of protection IK05 IEC 50102
Standards CSA C22.2 No 14
EN/IEC 60947-5-4
EN/IEC 60947-1
JIS C8201-5-1
UL 508
EN/IEC 60947-5-1
JIS C8201-1
Product certifications LROS (Lloyds register of shipping)
DNV
GL
RINA
UL Listed
CSA
BV
Vibration resistance 5 gn (f= 2…500Hz) conforming to IEC 60068-2-6
Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27
50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27
Ordering and shipping details
Category 22467 - PUSHBUTTONS,22MM(PLASTIC) NEW
Discount Schedule CS2
GTIN 03389119043502
Nbr. of units in pkg. 1
Package weight(Lbs) 0.05lb(US) (0.02kg)
Returnability No
Country of origin FR
Packing Units
Unit Type of Package 1 PCE
Package 1 Height 1.30in (3.3cm)
Package 1 width 2.09in (5.3cm)
Package 1 Length 2.17in (5.5cm)
Unit Type of Package 2 BB1
Number of Units in Package 2 5
Package 2 Weight 4.44oz (126g)
Package 2 Height 1.30in (3.3cm)
Package 2 width 2.17in (5.5cm)
Package 2 Length 10.43in (26.5cm)
Unit Type of Package 3 S02
Number of Units in Package 3 50
Package 3 Weight 3.52lb(US) (1.598kg)
Package 3 Height 5.91in (15cm)
Package 3 width 11.81in (30cm)
2
Package 3 Length 15.75in (40cm)
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP),
which is known to the State of California to cause birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
Contractual warranty
Warranty 18 months
3
Product data sheet
Dimensions Drawings
ZB5AA791
Dimensions
Without Boot
With Boot ZBA709
4
Product data sheet
Mounting and Clearance
ZB5AA791
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
(1) Diameter on finished panel or support
(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
(3) Ø22.5mm recommended (Ø22.3 0 +0.4) / Ø0.89in. recommended (Ø0.88in. 0 +0.016)
Connections a in mm a in in. b in mm b in in.
By screw clamp terminals or plug-in connector 40 1.57 30 1.18
By Faston connectors 45 1.77 32 1.26
On printed circuit board 30 1.18 30 1.18
Detail of Lug Recess
(1) Diameter on finished panel or support
(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
(3) Ø22.5mm recommended (Ø22.3 0 +0.4) / Ø0.89in. recommended (Ø0.88in. 0 +0.016)
5
Product data sheet
Mounting and Clearance
ZB5AA791
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installer’s Side)
A: 30mm min. / 1.18in. min.
B: 40mm min. / 1.57in. min.
Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
A: 30mm min.
B: 40mm min.
6
Dimensions in in.
A: 1.18in. min.
B: 1.57in. min.
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3mm / 0.012in.: T1 + T2 = 0.3mm max.
Installation Precautions
● Minimum thickness of circuit board: 1.6mm / 0.06in.
● Cut-out diameter: 22.4mm ± 0.1 / 0.88in. ± 0.004
●Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
● Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max.
● Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
○ every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y).
○ with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1) Head ZB5AD•
(2) Panel
(2) Nut
(4) Printed circuit board
7
Mounting of Adapter (Socket) ZBZ01•
● 1 2 elongated holes for ZBZ006 screw access
● 2 1 hole Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 for centring adapter ZBZ01•
● 3 8 × Ø 1.2mm / 0.05in. holes
● 4 1 hole Ø 2.9mm ± 0.05 / 0.11in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4mm / 0.09in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 holes for centring adapter ZBZ01•.
8
Product data sheet
Technical Description
ZB5AA791
Electrical Composition Corresponding to Code C1
9
Product data sheet
Technical Description
ZB5AA791
Electrical Composition Corresponding to Code C2
10
Product data sheet
Technical Description
ZB5AA791
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
11
Product data sheet
Technical Description
ZB5AA791
Legend
Single contact
Double contact
Light block
Possible location
12