2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: KP-2012VGC-A GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features z2.0mmx1.25mm zLOW SMT LED,1.1mm THICKNESS. G-SiC Light Emitting Diode. POWER CONSUMPTION. zWIDE zIDEAL The Green source color devices are made with InGaN on VIEWING ANGLE. Static electricity and surge damage the LEDS. FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic zVARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. zPACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically zMOISTURE zRoHS SENSITIVITY LEVEL : LEVEL 3. grounded. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF7109 REV NO: V.5 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 1 OF 4 Selection Guide Dice Part No. KP-2012VGC-A Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 1/2 50 180 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF7109 REV NO: V.5 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 2 OF 4 Green KP-2012VGC-A SPEC NO: DSAF7109 REV NO: V.5 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 3 OF 4 KP-2012VGC-A Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF7109 REV NO: V.5 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 4 OF 4