SPEC NO: DSAF7109 REV NO: V.5 DATE: MAY/21/2007 P AGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA
Package Dimensions
2.0x1.25mm SMD CHIP LED LAMP
Part Number: KP-2012VGC-A GREEN
Description
The Green source color devices are made with InGaN on
G-SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
PRELIMINARY SPEC
Features
z2.0mmx1.25mm SMT LED,1.1mm THICKNESS.
zLOW POWER CONSUMPTION.
zWIDE VIEWING ANGLE.
zIDEAL FOR BACKLIGHT AND INDICAT OR.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF7109 REV NO: V.5 DATE: MAY/21/2007 P AGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
Part No. Dice Lens Type Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2 θ 1/2
KP-2012VGC-A GREEN (InGaN) WATER CLEAR 50 180 120°
Parameter Green Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating/S torage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 520 nm IF=20mA
λD [1] Dominant Wavelength Green 525 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 35 nm IF=20mA
VF [2] Forward Voltage Green 3.2 4.0 V IF=20mA
IR Reverse Current Green 10 uA VR = 5V
C Capacitance Green 100 pF VF=0V;f=1MHz
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAF7109 REV NO: V.5 DATE: MAY/21/2007 P AGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA
Green KP-2012VGC-A
SPEC NO: DSAF7109 REV NO: V.5 DATE: MAY/21/2007 P AGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA
KP-2012VGC-A
Tape Specifications
(Units : mm)
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)