Applications
• Computers and peripherals
• Digital still cameras
• Cell phones
• PDAs
• DVD Players
• MP3/Multimedia players
• A-V Equipment
• External storage
• DSL Modems
• Set top boxes
• Docking systems
Part Numbering System: TVSA 04 V05 C006
Product Family
Size
Reverse Stand-Off Voltage
Capacitance in pF
Packaging
• Size 0201: 15,000 pieces per reel - EIA (EIAJ)
• Size 0402: 10,000 pieces per reel - EIA (EIAJ)
Transient Voltage ESD Suppressor
TVSA Series
0710 BU-SB10747 Page 1 of 2 Data Sheet 4072
Surface Mount Device
Description
Cooper Bussmann®TVSA Series of transient voltage suppressors are
designed to protect electronic circuits from ESD damage. With its small,
standardized 0201 and 0402 sizes, it’s easy to implement them into any
circuit board design.
Features
• Silicon based chip
• Low capacitance to meet the needs for high speed single transient
voltage protection
• Provides ESD protection with fast response time (<1ns) allowing
equipment to pass IEC 61000-4-2 level 4 test
• Low profile designs for board space savings
• Low leakage current reduces power consumption
• Low clamping voltage
• Solid-state silicon-avalanche technology
• Lead free, halogen free and RoHS compliant for global applications
Pb
Specifications
Part Stand-Off Breakdown Clamping Voltage Capacitance ESD Leakage Current
Number Size Voltage Voltage At Ipeak = 1A pF Air/Contact (kV) (typical)
TVSA02V05C004 0201 5 10 17 4 15/8 < 10nA
TVSA04V05C006 0402 5 10 17 6 15/8 < 10nA
HALOGEN
HF
FREE
Stand-off Voltage - Maximum DC operating voltage the diode can maintain and not exceed 1μA leakage current.
Breakdown Voltage - Measured at any I/O pin to ground at 1mA DC current.
Clamping Voltage - Maximum peak voltage across the diode with 8/20μs waveform and 1A pulse current.
Capacitance - Device capacitance measured with zero volt bias at 1MHz.
ESD Air/Contact - Voltages tested to IEC 61000-4-2.
© 2009 Cooper Bussmann
St. Louis, MO 63178
www.cooperbussmann.com
0710 BU-SB10747 Page 2 of 2 Data Sheet 4072
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-
port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result
in significant injury to the user.
Time (seconds)
Temperature (°C)
Soldering Recommendations
• Compatible with lead and lead-free solder reflow processes
• Peak reflow temperatures and durations:
- IR Reflow = 260°C max for 30 sec. max.
- Wave Solder = 260°C max. for 10 sec. max.
• Recommended IR Reflow Profile:
Environmental Specifications
Characteristic Value
Bias Humidity: +40°C, 90% RH for 1000 hours
Thermal Shock: -40°C to +85°C, 30 minute cycle, 5 cycles
Operating Temperature Range: -40°C to +85°C
Storage Temperature Range: -40°C to +85°C
Dimensions - mm
W
H
L
C
c
b b
d
a
Recommended Pad Layout - mm (in)
Size L W H C
0201 0.60±0.05 0.30±0.05 0.30±0.05 0.20±0.10
0402 1.00±0.15 0.50±0.10 0.50±0.10 0.25±0.15
Size a b c d
0201 0.23 (0.009) 0.30 (0.012) 0.45 (0.018) 0.83 (0.033)
0402 0.51 (0.020) 0.61 (0.024) 0.51 (0.020) 1.70 (0.067)
Tape Packaging Specifications - mm
0201 Carrier Dimensions
AB WE FP0P1P2D0T
0.37 0.69 8.0 1.75 3.5 4.0 2.0 2.0 1.55 0.42
±0.03 ±0.03 ±0.1 ±0.05 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 ±0.03
0402 Carrier Dimensions
0.58 1.2 8.0 1.75 3.5 4.0 2.0 2.0 1.55 0.60
±0.03 ±0.03 ±0.1 ±0.05 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 ±0.03
