VS-30TPS..PbF Series, VS-30TPS..-M3 Series www.vishay.com Vishay Semiconductors High Voltage Phase Control Thyristor, 30 A FEATURES 2 (A) * Designed and JEDEC-JESD47 qualified according to * Compliant to RoHS Directive 2002/95/EC * 125 C max. operating junction temperature * Halogen-free according to IEC 61249-2-21 definition (-M3 only) 1 (K) (G) 3 TO-247AC APPLICATIONS PRODUCT SUMMARY Package TO-247AC Diode variation Single SCR IT(AV) 20 A VDRM/VRRM 800 V, 1200 V VTM 1.3 V IGT 45 mA TJ - 40 C to 125 C * Typical usage is in input rectification crowbar (soft start) and AC switch in motor control, UPS, welding and battery charge DESCRIPTION The VS-30TPS... high voltage series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 C junction temperature. MAJOR RATINGS AND CHARACTERISTICS TEST CONDITIONS PARAMETER IT(AV) VALUES UNITS 20 Sinusoidal waveform A IRMS 30 VRRM/VDRM 800/1200 V 300 A 1.3 V dV/dt 500 V/s dI/dt 150 A/s - 40 to 125 C ITSM 20 A, TJ = 25 C VT TJ VOLTAGE RATINGS VRRM/VDRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VS-30TPS08PbF, VS-30TPS08-M3 800 900 VS-30TPS12PbF, VS-30TPS12-M3 1200 1300 PART NUMBER IRRM/IDRM AT 125 C mA 10 Revision: 10-Nov-11 Document Number: 94386 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30TPS..PbF Series, VS-30TPS..-M3 Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current IT(AV) Maximum RMS on-state current IRMS Maximum peak, one-cycle non-repetitive surge current ITSM TEST CONDITIONS TC = 95 C, 180 conduction half sine wave 10 ms sine pulse, rated VRRM applied 250 10 ms sine pulse, no voltage reapplied 300 10 ms sine pulse, rated VRRM applied 310 10 ms sine pulse, no voltage reapplied 442 4420 I2t Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied Maximum on-state voltage drop VTM 20 A, TJ = 25 C Threshold voltage Maximum reverse and direct leakage current Maximum holding current Maximum latching current rt VT(TO) IRM/IDM TJ = 125 C TJ = 25 C TJ = 125 C VR = Rated VRRM/VDRM UNITS 20 30 Maximum I2t for fusing On-state slope resistance VALUES A A2s A2s 1.3 V 12 m 1.0 V 0.5 10 IH Anode supply = 6 V, resistive load, initial IT = 1 A 100 IL Anode supply = 6 V, resistive load 200 mA Maximum rate of rise of off-state voltage dV/dt 500 V/s Maximum rate of rise of turned-on current dI/dt 150 A/s VALUES UNITS TRIGGERING PARAMETER SYMBOL TEST CONDITIONS PGM 8.0 Maximum average gate power PG(AV) 2.0 Maximum peak positive gate current + IGM 1.5 A Maximum peak negative gate voltage - VGM 10 V Maximum peak gate power Maximum required DC gate current to trigger Maximum required DC gate voltage to trigger IGT VGT Maximum DC gate voltage not to trigger VGD Maximum DC gate current not to trigger IGD Anode supply = 6 V, resistive load, TJ = - 10 C 60 Anode supply = 6 V, resistive load, TJ = 25 C 45 Anode supply = 6 V, resistive load, TJ = 125 C 20 Anode supply = 6 V, resistive load, TJ = - 10 C 2.5 Anode supply = 6 V, resistive load, TJ = 25 C 2.0 Anode supply = 6 V, resistive load, TJ = 125 C 1.0 TJ = 125 C, VDRM = Rated value W mA V 0.25 2.0 mA VALUES UNITS SWITCHING PARAMETER SYMBOL Typical turn-on time tgt Typical reverse recovery time trr Typical turn-off time tq Revision: 10-Nov-11 TEST CONDITIONS TJ = 25 C TJ = 125 C 0.9 4 s 110 Document Number: 94386 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30TPS..PbF Series, VS-30TPS..-M3 Series www.vishay.com Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Maximum thermal resistance, case to heatsink RthCS TEST CONDITIONS VALUES UNITS - 40 to 125 C 0.8 DC operation Mounting surface, smooth and greased 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf * cm (lbf * in) Approximate weight Mounting torque 30TPS08 30TPS.. Series R thJC (DC) = 0.8 C/ W 120 Conduction Angle 110 30 60 90 100 120 180 90 0 5 10 15 20 25 Maximum Average On-state Power Loss (W) Case style TO-247AC (JEDEC) 30TPS12 60 180 120 90 60 30 50 40 RMS Limit 30 20 Conduction Angle 30TPS.. Series TJ= 125C 10 0 0 5 10 15 20 25 30 Average On-state Current (A) Average On-state Current (A) Fig. 1 - Current Rating Characteristics Fig. 3 - On-State Power Loss Characteristics 130 30TPS.. Series RthJC (DC) = 0.8 C/ W 120 110 Conduction Period 100 30 90 60 90 120 180 DC 80 0 5 10 15 20 25 30 35 Maximum Average On-state Power Loss (W) Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) Marking device 130 C/W 40 80 DC 180 120 90 60 30 60 40 RMS Limit Conduction Period 20 30TPS.. Series TJ = 125C 0 0 10 20 30 40 50 Average On-state Current (A) Average On-state Current (A) Fig. 2 - Current Rating Characteristics Fig. 4 - On-State Power Loss Characteristics Revision: 10-Nov-11 Document Number: 94386 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30TPS..PbF Series, VS-30TPS..-M3 Series Vishay Semiconductors 280 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. 260 Initial TJ = 125C @ 60 Hz 0.0083 s 240 @50 Hz 0.0100 s 220 200 180 160 140 30TPS.. Series 120 1 10 300 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) www.vishay.com Maximum Non Repetitive Surge Current Versus Pulse Tra in Duration. Control Of Conduc tion May Not Be Ma intained. Initial TJ= 125C No Voltage Reapplied Rated VRRMReapplied 280 260 240 220 200 180 160 140 30TPS.. Series 120 0.01 100 Numb er Of Equa l Amplitude Ha lf Cyc le Current Pulses (N) 0.1 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous On-state Current (A) 1000 TJ= 25C TJ= 125C 100 10 30TPS.. Series 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V) Transient Thermal Impedance Z thJC (C/ W) Fig. 7 - On-State Voltage Drop Characteristics 1 Steady State Value (DC Operation) D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 Single Pulse 30TPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Revision: 10-Nov-11 Document Number: 94386 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30TPS..PbF Series, VS-30TPS..-M3 Series www.vishay.com Vishay Semiconductors Rec tangular gate p ulse a )Rec ommend ed loa d line for rated di/ dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b)Recommend ed load line for <= 30% rated di/ dt: 10 V, 65 ohms 10 tr = 1 s, tp >= 6 s (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a ) (b ) VGD TJ = -10 C TJ = 125 C 1 TJ = 25 C Instantaneous Gate Voltage (V) 100 IGD 0.01 (2) (1) Frequency Limited by PG(AV) 30TPS.. Series 0.1 0.001 (3) (4) 0.1 1 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics ORDERING INFORMATION TABLE Device code VS- 30 T P S 12 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (30 = 30 A) 3 - Circuit configuration: 4 - T = Thyristor Package: P = TO-247 5 - Type of silicon: S = Standard recovery rectifier 6 - 7 - 08 = 800 V 12 = 1200 V Voltage code x 100 = VRRM Environmental digit: PbF = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY VS-30TPS08PbF 25 500 PACKAGING DESCRIPTION Antistatic plastic tubes VS-30TPS08-M3 25 500 Antistatic plastic tubes VS-30TPS12PbF 25 500 Antistatic plastic tubes VS-30TPS12-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information Revision: 10-Nov-11 www.vishay.com/doc?95223 TO-247AC PbF www.vishay.com/doc?95226 TO-247AC -M3 www.vishay.com/doc?95007 Document Number: 94386 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS in millimeters and inches A A (3) (6) O P E B (2) R/2 N A2 S (Datum B) O K M DBM FP1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M Planting (4) E1 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Lead assignments Base metal D DE (c) c1 E C C Diodes 1. - Anode/open 2. - Cathode 3. - Anode (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.37 2.59 3.43 2.59 3.38 0.38 0.86 0.38 0.76 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.094 0.102 0.135 0.102 0.133 0.015 0.034 0.015 0.030 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e FK L L1 N P P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 2.54 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.275 0.209 0.224 1.78 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) O P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC outline TO-247 with exception of dimension c Revision: 16-Jun-11 Document Number: 95223 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000