A–99
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A
Pushbutton
C&K NE-18 Series
Mains / Power Switches
Features/Benefits
•Chassis or panel mount
•Various buttons
•Various contact configurations
•RoHS compliant
Typical Applications
•Mains/power switching
•Consumer electronics
•Audio equipment
•Digital products
Specifications
POWER CONTACT:
SWITCHING POWER MAX. AC/DC: NE18: 1500/100 W,
NE18CTII: 1000/100 W; AC (Inductive cos w=0.6): NE18: 900W,
NE18CTII: 600W.
SWITCHING VOLTAGE MAX. AC/DC: 250/100V
SWITCHING CURRENT MAX. AC/DC
AC (Inductive cos w=0.6): NE18: 6 A2)4)/1 A, NE18CTII: 4 A2)/1 A
INRUSH CURRENT MAX. AC1): NE18: 36 A, NE18CTII: 64 A
DIELECTRIC STRENGTH (50 Hz, 1 min.): 2000 V
OPERATING LIFE AT MAX. LOAD AND AT MAX. INRUSH
CURRENT: ^104operations5)
CONTACT RESISTANCE: Initial: 50mΩ; After 104operations: 70mΩ.
INSULATION RESISTANCE: ^1012 Ωchassis – nearest contact;
^1012 Ωmains contact – mains contact; ^1012 Ωmains contact –
mains contact after 104operations.
LOW VOLTAGE CONTACT:
SWITCHING POWER MAX.: 12W
SWITCHING VOLTAGE MAX.: 24V
SWITCHING CURRENT MAX.: 0.5A
TOTAL TRAVEL: 4.7mm (.185 inch)
LATCHING TRAVEL: 3.3mm (.130 inch)
OPERATING FORCE: Without auxiliary low voltage contacts:
NE18: 7N (700 grams); NE18CTII: 9.5N (950 grams).
With auxiliary low voltage contacts: NE18: 8N (800 grams);
NE18CTII: 11N (1100 grams).
SEALING: Dust proof.
Materials
HOUSING, ACTUATOR & TERMINAL BOARD: Thermoplastic
polyester (UL 94V-0).
MOVABLE CONTACT: Silver nickel alloy, silver plated.
FIXED CONTACTS: Silver nickel alloy, silver plated.
COMMON CONTACTS & TERMINALS: Copper alloy, silver plated.
RETURN SPRING: Music wire.
NOTE: For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs. All models arer RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-100 thru A-106. For additional options not shown in catalog, consult Customer Service Center.
If requesting only a switch, select the switch as noted below. Buttons are sold separately.
Designation
NE18 NE1B
ZNE18 Cental mounted NE1B
Single Station Chassis
01 With .094 mounting holes
(NONE) No chassis
02 With 4-40 tapped mounting holes
03 Special chassis (consult factory)
Dress nut*
*Central mounted
ZNE18 series only
(NONE) No dress nut
BBlack
CChrome
Mechanical Function
OA Momentary
EE Alternate (push-push)
Contact Arrangement
NE18 code # - see list
A–100
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
Style
F01 FMR
F02 FG*
F12 FSC
F13 FSD
F14 FU12
F15 FSB
F16 FE
F19 FA
F21 F001
Button Color
01 Black
02 White
03 Red
04 Light gray
Order Code - Buttons
Solid Buttons Mechanical Indicator Buttons
Style
F01 FA100
F02 FA101
F07 FA120
F08 FA2O1
F11 FA200*
Shell Color
01 Black
Out Position Color
01 Black
In Position Color
02 White
06 Yellow
07 Blue
08 Green
12 Orange
*Button options for central mounting configurations,
use ‘FG’ for central mount with chrome dress nut,
use ‘FA200’ for central mount with black dress nut.
BUTTON REMOVAL
A button of a push-push switch should only be
removed in the “OFF” non-latching position.
A
Pushbutton
0.394
(10)
0.492
(12,5)
(A)
(R) (R)
P1P2
(A)
0.394
(10)
0.494
(12,55)
0.236
(6)
1,5±0,1
NE18 2U
0.236
(6)
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
NE1838EE
0.7
(17,8)
1.09
(27,8)
0.406
(21,4)
0.335
(8,5)
0.13
(3,3)
0.394
(10)
0.494
(12,5)
0.583
(14,8)
0.709
(18) 0.315
(8)
0.197
(5)
A–101
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
NE1848EE
NE1839EE
PC MOUNTING
A
Pushbutton
A–102
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
A
Pushbutton
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
ZNE1838EECF0201
PC MOUNTING
A–102
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
CONTACT ARRANGEMENT
MECHANICAL FUNCTION
Momentary
Alternate (push-push)
OA
EE
FUNCTIONOPTION CODE
37 NE18 — 2AX DPST
38 NE18 — 2UX DPDT
51 2U + NE18 — 2AX DPST*
52 (4A/64) NE18CTII — 2AX DPST
39 2U + NE18 — 2UX DPDT*
41 NE18 — 2AP DPST
42 NE18 — 2UP DPDT
43 NE18 — 2AW DPST
44 NE18 — 2UW DPDT
45 NE18 — 2ASX DPST
ELECTRICAL
CIRCUITSTYLE
OPTION CODE
Contact capacity
and availability
46 NE18 — 2USX DPDT
47 NE18 — 2ASP DPST
48 NE18 — 2USP DPDT
49 NE18 — 2ASW DPST
50 NE18 — 2USW DPDT
53 (4A/64) 2U + NE18CTII — 2AX DPST
54 2U + NE18 — 2AW DPST
55 2U + NE18 — 2AP DPST
56 2U + NE18 — 2UW DPDT
57 2U + NE18 — 2UP DPDT
ELECTRICAL
CIRCUITSTYLE
OPTION CODE
Contact capacity
and availability
* 2U + Denotes auxiliary set of low current contacts DPDT
2A = DPST
2U = DPDT
S = Snap-in mounting
X = Solder lug/PC pins
W = Solder lugs only
P = PC pins only
NOTES
1. Contact plating is silver on all Power Switches.
2. The electrical function is Break Before Make (BBM) on all Power Switches.
3. The terminals will be epoxy sealed.
1) A = make contact, R = break contact, U = changeover contact, m= VDE sign for switches with a contact spacing (air gap) < 3mm (.118 inch) according to
VDE 0630/CEE 24.
2) With 2A mains contacts: Mounting only by PC pins is not sufficient.
3) BSI only for 2U mains contacts.
VDE, BSI, DEMKO, CSA,
SEMKO, SEV, UL, NEMKO
II
> 3mm
(.118 inch)
2U
2A2
NE18CTII
VDE, MEEI, BSI3,
DEMKO, NEMKO,
SEMKO, SEV, CSA, UL
I
> 3mm (m)
(.118 inch)
2U
2A2
2U
NE18
VDE, BSI, DEMKO,
NEMKO, SEMKO, SEV,
CSA, UL
II
> 3mm
(.118 inch)
2U
2A2
NE18
APPROVALS
PROTECTION CLASS
(CEE 24)CONTACT SPACING
POSSIBLE CONTACT ARRANGEMENT
POWER CONTACTS1AUXILIARY CONTACTS
TYPE
A
Pushbutton
A
Pushbutton
A–103
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
SINGLE STATION CHASSIS
DRESS NUT
PANEL CUTOUT
PANEL CUTOUT
03 SPECIAL CHASSIS (CONSULT FACTORY)
02 WITH 4-40 TAPPED MOUNTING HOLES01 WITH .094 MOUNTING HOLES (NONE) NO CHASSIS
CCHROMEBBLACK(NONE) NO DRESS NUT
NOTE: Available with ZNE18 designation and
FG button.
NOTE: Available with ZNE18 designation and FA200 buttons.
A–104
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
SOLID BUTTON
F19 FA
F16 FE
F14 FU12F13 FSD
F12 FSCF02 FGF01 FMR
F15 FSB
STYLE
01 BLACK
02 WHITE
03 RED
04 LT. GRAY
COLOROPTION CODE
A
Pushbutton
A–105
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
SOLID BUTTON
MECHANICAL BUTTON
F01 FA100
F21 F001
F02 FA101
01 BLACK
02 WHITE
03 RED
04 LT. GRAY
BLACK/CHROME
09 (F03,F06 & F07
buttons only
COLOROPTION CODE
STYLE
COLOR
SHELL COLOR IN POSITION COLOR
STYLE OUT POSITION COLOR
STYLE
STYLE
A
Pushbutton
A–106
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Third Angle
Projection
C&K NE-18 Series
Mains / Power Switches
MECHANICAL BUTTON STYLE
SHELL COLOR
OUT POSITION COLOR
IN POSITION COLOR
01 BLACK
01 BLACK
F08 FA201 F11 FA200
STYLE
SHELL COLOR
OUT POSITION COLOR
IN POSITION COLOR
02 WHITE
06 YELLOW
07 BLUE
08 GREEN
12 ORANGE
COLOROPTION CODE
A
Pushbutton