103308-8 - AMP / Tyco Electronics

Keying Plugs

512-6434 102537-5 14 0.700" 1.26 1.15

512-6087 102537-8 20 1.000" .39 .35

512-6436 1-102537-0 24 1.200" 1.26 1.15

512-6089 1-102537-1 26 1.300" .39 .35

512-6438 1-102537-3 30 1.500" .43 .39

512-6091 1-102537-5 34 1.700" 1.26 1.15

512-6093 1-102537-8 40 2.000" .95 .86

512-6095 2-102537-3 50 2.500" .95 .86

Non-polarizing Cover Ñ Fig. D. For shielded connectors or non-polarizing

applications.

512-6440 102541-1 6 0.300" .24 .22

512-6097 102541-2 8 0.400" .42 .38

512-6099 102541-3 10 0.500" .24 .22

512-6101 102541-5 14 0.700" .41 .37

512-6103 102541-6 16 0.800" .30 .27

512-6105 102541-8 20 1.000" 1.20 1.09

512-6107 1-102541-1 26 1.300" .70 .63

Back Covers Ñ Fig. E

Fig. E Ñ For use with the front covers to the left.

512-6117 102536-3 10 0.500" .27 .24

512-6444 102536-4 12 0.600" .97 .88

512-6119 102536-5 14 0.700" .88 .80

512-6121 102536-6 16 0.800" .74 .66

512-6446 102536-7 18 0.900" .68 .62

512-6123 102536-8 20 1.000" .34 .31

512-6125 1-102536-1 26 1.300" .49 .45

512-6131 2-102536-3 50 2.500" 1.35 1.21

512-6424 102398-1 6 0.300" 1.68 1.51

512-6000 102398-2 8 0.400" 2.74 2.47

512-6002 102398-3 10 0.500" 2.31 2.08

512-6004 102398-4 12 0.600" 2.74 2.47

512-6006 102398-5 14 0.700" 3.20 2.88

512-6008 102398-6 16 0.800" 2.63 2.36

512-6010 102398-7 18 0.900" 2.79 2.51

512-6012 102398-8 20 1.000" 4.56 4.10

512-0946 102394-8* 20 1.000" 2.24 2.02

512-6014 1-102398-1 26 1.300" 3.25 2.92

512-6426 1-102398-3 30 1.500" 6.85 6.16

512-6018 1-102398-5 34 1.700" 7.75 6.98

512-6022 1-102398-8 40 2.000" 6.78 6.10

512-6026 2-102398-3 50 2.500" 8.25 7.43

Wire Size 22-20 AWG Ñ Fig. A

512-6040 102448-3 10 0.500" 2.31 2.08

512-6042 102448-4 12 0.600" 2.74 2.47

512-6044 102448-5 14 0.700" 3.20 2.88

512-6046 102448-6 16 0.800" 3.65 3.28

512-6048 102448-8 20 1.000" 4.56 4.10

512-6428 1-102448-0 24 1.200" 5.51 4.96

512-6052 1-102448-1 26 1.300" 4.71 4.24

512-6068 1-102448-8 40 2.000" 9.04 8.22

*Unloaded housings.

Front Covers

Latching Cover Ñ Fig. B. Mates with AMPMODU

4-sided shrouded headers

with extraction slot.

AMPMODU

Printed Circuit Board Connectors

Turn To Section 1 For Allied Office Addresses and Local Phone Numbers ALLIED

391

Double Row MT Receptacle Connectors

Housings are preloaded with standard pressure contacts on 0.100" ´0.100"

centers. The contacts are insulation displacement for termination of discrete

wires or ribbon cable with conductors separated. Crimp, snap-in contacts can

be used interchangeably with the insulation displacement contacts. Connector

covers are sold separately. Specifications. Housing: Black thermoplastic,

flame retardant. Contacts: Copper alloy; duplex plated 0.000030 µ" gold on the

contact area, 0.000050 µ" min. tin-lead on termination area, with entire contact

underplated 0.000050 µ" nickel. Rating: 3 amperes for single contact in free air.

UL recognized, CSA certified. Operating Temperature: Ð65¡C to +105¡C. Mate

with posts 0.222"-0.273" in length.

Wire Size 26-22 AWG Ñ Fig. A

Front Covers (continued)

Ejection Cover Ñ Fig. C. Mates with AMP-LATCH

universal ejection style pin

headers with latching ears or AMPMODU

low profile shrouded headers.

Covers. Low profile for double row MT connectors. Material: Black thermoplastic, flame retardant.

Stock Mfr.Õs No. of A

No. Type Pos. Dim.

EACH

1-99 100-499

Stock Mfr.Õs No. of L

No. Type Pos. Dim.

EACH

1-99 100-499

Standard Profile Headers Ñ

Shrouded Right Angle,

Double Row,

0.100" ´0.100 Centers

0.025 Square Right-Angle Post Ñ 0.066 End Dimension

512-2836 103166-1 6 0.412 0.332 1 .84 .75

512-2838 102617-1 6 0.412 0.332 2 .73 .65

512-2840 103166-2 8 0.512 0.432 1 1.09 .98

512-2842 102617-2 8 0.512 0.432 2 1.52 1.37

Low Profile Headers

*Contact Plating: 1=Duplex C Ñ 0.000030 gold on contact area, 0.000100-0.000200 tin-lead on solder area, with entire post underplated 0.000050 nickel;

2=Duplex D Ñ 0.000015 gold on contact area 0.000100-0.000200 tin-lead on solder area, with entire post underplated 0.000050 nickel; 3=Tin-Lead/Nickel Ñ

0.000100-0.000200 tin-lead over 0.000050 nickel on entire post.

0.025 Square Straight Post Ñ Fig. A 0.025 Square Right-Angle Post Ñ Fig. B

512-2626 103308-1 10 0.800 0.700 2 .48 .43

512-2627 103309-1 10 0.800 0.700 1 .57 .51

512-2625 103308-2 14 1.000 0.900 2 .63 .57

512-2628 103308-3 16 1.100 1.000 2 .88 .80

512-2629 103308-5 20 1.300 1.200 2 .84 .76

512-2630 103309-5 20 1.300 1.200 1 1.02 .92

512-2631 103308-6 26 1.600 1.500 2 .99 .89

512-2632 103309-6 26 1.600 1.500 1 1.20 1.08

512-2633 103308-7 34 2.000 1.900 2 1.29 1.16

512-2635 103308-8 40 2.300 2.200 2 1.50 1.35

512-2636 1-103308-0 50 2.800 2.700 2 1.44 1.29

512-2634 103310-1 10 0.800 0.700 2 .63 .57

512-2637 103311-1 10 0.800 0.700 1 1.81 1.63

512-2638 103310-2 14 1.000 0.900 2 .84 .75

512-2644 103310-3 16 1.100 1.000 2 .70 .63

512-2648 103310-5 20 1.300 1.200 2 1.11 1.00

512-2639 103310-6 26 1.600 1.500 2 1.34 1.20

512-2640 103310-7 34 2.000 1.900 2 4.53 4.08

512-2641 103311-7 34 2.000 1.900 1 5.10 4.59

512-2642 103310-8 40 2.300 2.200 2 5.10 4.59

512-2643 1-103310-0 50 2.800 2.700 2 2.10 1.89

ÑÑÑÑÑÑÑÑ

*Contact Plating: 1=Duplex C Ñ 0.000030 gold on contact area, 0.000100-0.000200 tin-lead on solder area, with entire post underplated 0.000050 nickel; 2=Duplex D Ñ 0.000015 gold on contact area 0.000100-0.000200 tin-lead on solder area,

with entire post underplated 0.000050 nickel; 3=Tin-Lead/Nickel Ñ 0.000100-0.000200 tin-lead over 0.000050 nickel on entire post.

Stock Mfr.Õs No. of

No. Type Pos.

Dimensions Plating

Code*

BA 100-4991-99

EACH

Stock Mfr.Õs No. of

No. Type Pos.

Dimensions Plating

Code*

BA 100-4991-99

EACH

512-2848 103167-1 8 0.680 0.600 1 1.06 .98

512-2850 102570-2 8 0.680 0.600 2 1.52 1.37

512-2852 103167-2 10 0.780 0.700 1 2.11 1.92

512-2854 102570-3 10 0.780 0.700 2 1.09 .98

Stock Mfr.Õs No. of

No. Type Pos.

Dimensions Plating

Code*

BA 100-4991-99

EACH

Stock Mfr.Õs No. of

No. Type Pos.

Dimensions Plating

Code*

BA 100-4991-99

EACH

Shrouded with 0.150 End Dimension Double Row, 0.100" ´0.100" Centers

0.025 Square Right-Angle Post Ñ 0.150 End Dimension

Material: Natural color nylon. For all AMPMODU

receptacles.

Type 86286-1. Plugs into receptacle contact.

512-6070. 1-99 ...............................................................................EACH .13

100-499 ...........................................................................................EACH .11

Type 87077-2. Plugs directly into housing.

512-6071. 1-99 ...............................................................................EACH .09

100-499 ...........................................................................................EACH .08

Contact Extraction and Lance Reset Tool

Type 843996-3. For new style locking lance Mod. IV contacts.

512-6073 .........................................................................................EACH 14.47

Pistol Grip Tool

512-6430 102681-1 12 0.600" .49 .45

512-6432 102681-4 18 0.900" .48 .44

512-6077 102681-5 20 1.000" 1.36 1.24

512-6079 102681-8 26 1.300" .89 .81

512-6085 2-102681-0 50 2.500" 1.65 1.48

Stock Mfr.Õs No. of L

No. Type Pos. Dim.

EACH

1-99 100-499

Type 58074-1. Pistol grip-handle only.

512-9082 ........................................................................................EACH 75.48

Type 58062-1. Modular head for MT receptacles.

512-9083 ........................................................................................EACH 207.40

AMP/Tyco