F-203-1 FSI-150 - 03 - G-D FSI-140 - 03 - G-D-E FSI-120 - 03 - G-D-AT Surface SMT ONE-PIECE INTERFACE FSI SERIES Mount Choice of board stacking profiles SPECIFICATIONS For complete specifications see www.samtec.com?FSI Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Current Rating: 1A @ 80 ambient Operating Temp Range: -65C to +125C Plating: Au over 50" (1,27m) Ni Optional Alignment pins ALSO AVAILABLE Low profile see SEI & SEL series. (2,54mm) .100" pitch see SIB series. Processing: Max Processing Temp: 230C for 60 seconds SMT Lead Coplanarity: (0,10mm) .004" max (05-35) (0,15mm) .006" max (40-50) Compression Board: Gold Pads required Suggested PCB Layouts: For reference only. Please contact Samtec or go to www.samtec.com?FSI for recommended PCB layout. (2,54) .100 DIA (1,00mm) .03937" Note: Some lengths, styles and options are non-standard, non-returnable. FSI PER 1 PINS ROW BODY HEIGHT PLATING OPTION -03 (No. of positions x (1,00) .03937) + (15,24) .600 (9,00) .354 A (1,19) .047 (4,11) DIA .162 (2) (4,14) .163 (0,89) .035 Leave blank for Short Version (No screw down inserts or holes) -M = 2,00mm x 0,40mm screw thread ALIGNMENT OPTION Leave blank for no Alignment Pin -AT = Alignment Pin Top Side - AB = Alignment Pin Bottom Side OTHER OPTION -K = Polyimide Film Pick & Place Pad -TR = Tape & Reel Packaging - AD = Alignment Pin Dual Side (No. of positions x (1,00) .03937) + (7,24) .285 (1,00) .03937 (1,40) .055 (0,64) .025 TYP (1,07) .042 DIA (1,40) .055 - AT, -AD & -AB (0,36) .014 Dimensions not shown are same as above 10, 20 & 30 (-E & -M) 05 thru 50 (Non-threaded) INSERT OPTION = #2-56 x 1/16" screw thread (No. of positions x (1,00) .03937) + (0,76).030 (8,76) .345 (No. of positions x (1,00) .03937) + (7,24) .285 D -E (Short Version) SOLDER MATING BOARD BOARD B = 10" (0,25m) Gold 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 40 & 50 (-E & -M) (1,14) .045 (3,56) .140 -G (Screw Option) B A = 3,00mm 10, 20, 30, 40 & 50 (1,00) .03937 (0,61) .024 Short version or optional threaded inserts Insert Option (10, 20 & 30 pins/row) (No. of positions x (1,00) .03937) + (22,09) .870 (No. of positions/2 x (1,00) .03937) + (7,62) .300 (6,37) .251 (0,15) (3,00) .006 .118 (No. of positions x (1,00) .03937) + (14,10) .555 (0,89) .035 Insert Option (40 & 50 pins/row) Short Version Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM SAMTEC USA * Tel: 1-800-SAMTEC-9 or 812-944-6733 * Fax: 812-948-5047 SAMTEC UK * Tel: 01236 739292 * Fax: 01236 727113 SAMTEC GERMANY * Tel: +49 (0) 89 / 89460-0 * Fax: +49 (0) 89 / 89460-299 SAMTEC FRANCE * Tel: 01 60 95 06 60 * Fax: 01 60 95 06 61 SAMTEC ITALY * Tel: 39 039 6890337 * Fax: 39 039 6890315 SAMTEC ISRAEL * Tel: 972 3 648 7207 * Fax: 972 3 648 7214 SAMTEC SCANDINAVIA * Tel: +46-84477280 * Fax: +46-87420413 SAMTEC ASIA PACIFIC * Tel: 65 6745-5955 * Fax: 65 6841-1502 SAMTEC JAPAN * Tel: 81-424-42-8318 * Fax: 81-424-42-8319 SAMTEC CHINA * Tel: 86-21-5385-4089 * Fax: 86-21-5385-4047 SAMTEC TAIWAN * Tel: 886-02-2364-6077 * Fax: 886-02-2367-9531 SAMTEC HONG KONG * Tel: 852-26904858 * Fax: 852-26904842 SAMTEC ANZ * Tel: 613 9512 7747 * Fax: 613 9512 7745