First Edition Jun 5, 2002 @ |.CD Module Technical Specification for Trial Type No. F-51373GNC-LW-AJ Approved by (Prodi scion DN) F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 1/191.General Specifications Operating Temp. Storage Temp. Dot Pixels Dot Size Dot Pitch Viewing Area Outline Dimensions Weight LCD Type Viewing Angle min. OC ~max. 50C min. -20C ~max. 70C 240 X3 [R.G.B] (W) X 320 (H) dots 0.23 (W) X 0.225 (H) mm 0.24 (W) X 0.24 (H} mm 59.0 (W) X 80.3 (KH) mm 73.0 (W) X 94.4 (H) X 7.3 max. (D) mm 57.69 max. CTD-21398 LED Backlight {White Dimensional Outline UE-310878B F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 2/192.Electrical Specifications 2.1.Absolute Maximum Ratings Vss=0V Parameter Symbol Conditions Min. Max. Units Supply Voltage Vocc-Vss - -0.3 7.0 Vv ({Lagic) Supply Voltage | Vicp-Vss - -0.3 30.0 V (LCD Drive) Input Voltage Vi - -0.3 Vec+0.3 V 2.2.DC Characteristics Ta=25C, Vss=0V Parameter Symbol Conditions Min. Typ. Max. Units _ Supply Voitage Vec-Vss - V (Lagic) Supply Voltage | Vico-Vss V {LCD Drive) :.7~5.5V Vv 7~5.5V V Vec-Vss=3.0V - 0.7 1.1 mA Ice Vec-Vss=5.0V_ - 0.4 0.6 mA Supply Current ILcp Vico-Vss=24,2V - 3.7 5.6 mA Note 1 Note t:Checker Pattern F-51373GNC-LW-AJ (AJ) No. 2002-5021 OPTREX CORPORATION Page 3/192.3.AC Characteristics Vec=4,5~5,5V Parameter Symbol Min. Max. Units Shift Clock Period twex 50 - ns Shift Clock H Pulse Width twor 15 - ns Shift Clock L Pulse Width twex., 15 - ns Data Setup Time fos 10 - ns Data Hold Time tou 12 - ns Latch Pulse H Pulse Width tworH 15 - ns Shift Clock Rise to Latch Pulse Rise Time tio 0 - ns Shift Clock Fall to Latch Pulse Fall Time tei 30 - ns Latch Pulse Rise to Shift Clock Rise Time tis 25 - ns Latch Pulse Fall to Shift Clock Rise Time tu 25 - ns input Signal Rise,Fatl Time ty, tf - 50 Note.1 ns DISPOFF Removal Time tsp - ns DISPOFF Enable Pulse Width us Output Delay Time ns Note. : (tcxtwekil - twekl)/! Note.2 : CL= : Symbol Max. Units 7 8 SiweK 66 - ns : Width two 23 . ns Shift Clock L Pulse Width two. 23 - ns Data Setup Time tos 15 - ns Data Hold Time tou 23 - ns Latch Pulse H Pulse Width twipH 30 ns Shift Clock Rise to Latch Pulse Rise Time tio Q - ns Shift Clock Fall to Latch Pulse Fall Time ts 50 - ns Latch Pulse Rise to Shift Clock Rise Time | tis 30 - ns Latch Puise Fall to Shift Clock Rise Time tus 30 - ns Input Signal Rise,Fall Time tr, tf - 50 Note.1 ns DISPOFF Removal Time: - tsp | 100 . ons | DISPOFF Enable Pulse Width fwou 12 - us Output Delay Time ton. - 200 Note.2 ns Note.1 : (tcktwekll - twekl}/2 is the maximum in case of high speed operation. Note,2 : CL=15pF F-51373GNC-LW-AJ (AJ) No. 2002-8021 OPTREX CORPORATION Page 4/19Vec=2.5~3.0V Parameter Symbol Min, Max. Units Shift Clock Period twex 82 - ns Shift Clock H Pulse Width twern 28 - ns Shift Clock L. Pulse Width tweore 28 - ns Data Setup Time tos 20 ns Data Hold Time tox 23 - ns Latch Pulse H Pulse Width tweeu 30 - ns Shift Clock Rise to Latch Pulse Rise Time tio 0 - _ ns Shift Clock Falt to Latch Pulse Fall Time tsi 65 - ns Latch Pulse Rise te Shift Clock Rise Time tis 30 - ns Latch Pulse Fail to Shift Clock Rise Time tu 30 - ns Input Signal Rise,Fall Time tr, tt - 50 Note.1 ns DISPOFF Removal Time ns DISPOFF Enable Pulse Width us Output Delay Time ns Note.1 : (tex twekll - twekl)/ Note.2 : CL=15pE.. LP N tsi A R tL tLs Lott 7 'WCKL cP /| | twekH NV / -F | t, tt | WH... FF e tweok | ps DH DO~D7 x LAST DATA 4 TOP DATA twoL tsp DISPOFF F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 5/192.4. Timing Chart LP T=0.04464ms typ. [| FLM LP [| (Reduction) FLM Pty | CX wo EXE) Jikto (Reduction) SEG720 #1 D7 D | DS | ----------- | Do #320 TOP VIEW 240(RGB)x320 Dots F-51373GNC-LW-Ad (AJ} No. 2002-S024 OPTREX CORPORATION Page 6/192.6.Power Supply ON/OFF Sequence 2.6.1.ON Sequence SIGNAL LEVEL VCC vec } rrp reer tee ee eee eee eee eee eee { ves Os t, voc SIGNAL = VSS os t = VLCD vLCD! Cae elee crete eee eee i vss Gs t vec DISPOFF 2,6.2.OFF Sequence Os i, | VSS Procte eco rr eee eee mote > SIGNAL + vicp : DISPOFF Please maintain the above sequence when turning on and off the power supply of the module, lf DISPOFF is supplied to the module while internal alternate signal for LCD driving (M) is unstable, DC component will be supplied to the LCD panel. This may cause darmage the LCD module. F-51373GNC-LW-AJ (AJ) No. 2002-8024 OPTREX CORPORATION Page 7/192.7.Lighting Specifications 2.7.1.Absolute Maximum Ratings Ta=25C Parameter Symbol Conditions Min. Typ. Max. Units Foward Current lF Note 1 - - 120 mA Reverse Voltage Vr - - - 10 Vv LED Power Dissipation Pp - - - 960 Ww Note 1 : Refer to the foward current derating curve. IF (mA) 120 8O Poo Ta=25C Symbol Conditions Min. Typ. | Max. | Units Fowatd Voltage Ve IF=80mA - 7.2 8.0 V Luminance of L lF=80mA TBD 1000 - cd/m Backlight Surface Parameter Symbol Conditions Min. Typ. Max. Units Luminance of Module L IF=80mA TBD 50 - cd/m? F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 8/193.Optical Specifications 3.1.LCD Driving Voltage Parameter Symbol Conditions Min. Typ. Max. Units Recommended Ta= 0C - - TBD Vv LCD Driving Voltage Vicp-Vss Ta=25C TBD 24.2 TBD V Note 1 Ta=50C TBD - - v Note 7 : Voltage (Applied actual waveform to LCD Module) for the best contrast. The range of minimum and maximum shows tolerance of the operating voltage. The specified contrast ratio and response time are not guaranteed over the entire range. 3.2.Optical Characteristics Ta=25C, 1/320 Duty, 1/15 Bias, Vop=24.2V (Note 4), 0= 0, b=- Parameter Symbol Conditions Min. Typ. Max. Units Contrast Ratio Note { CR = 0, =- - TBD - Viewing Angle Shown in 3,3 : Response | Rise Note 2 Ton ms Time | Decay Note 3 TOFF ms Note 1 :Contrast ratio is defj Lo Vop=Voc-Vicp-VBE Assuming that the typical driving waveforms shown below are applied to the LCD Panel at 1/A Duty - 1/B Bias (A: Duty Number, B: Bias Number}. Driving voltage Voo is definded as follows. Vop = (Vthi+Vth2) / 2 Vth1: The voltage Vo-p that should provide 70% of the saturation level in the luminance at the segment which the ON signal is applied to. Vth2: The voltage Vo-p that should provide 20% of the saturation level in the luminance at the segment which the OFF signal is applied to. . . _ FL fo LE (B-2) xVo-p/B Ai fx ) Lit (ON SIGNAL } : ( OFF SIGNAL } F-51378GNC-LW-AJ (Ad) No. 2002-S021 OPTREX CORPORATION Page 9/193.3.Definition of Viewing Angle and Optimum Viewing Area Point * shows the point where contrast ratio is measured, :0= 0, 6= - *Driving condition : 1/320 Duty, 1/15 Bias, Vop=24.2V, fr=70Hz Phoiometer #1980A WB 90 Temperature Chamber Rotation Table (6,4) ) LoD Computer Optical Fiber YD Conirol Unit & oc Waveform Generator Halogen bulb F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 10/194.1/0 Terminal 4.7.Pin Assignment CN1 No. Symbol Function 1 Vss Power Supply (OV, GND) 2 Vss Power Supply (OV, GND) 3 FLM First Line Marker 4 LP Data Latch Signal 5 CP Clock Signal for Shifting Data 6 DISPOFF Display Control Signal H : Display on L : Display off 7 D7 Data Bus Line 8 D6 Data Bus Line 9 D5 Daia Bus Line 10 D4 Data Bus Line 11 Vcc Power Supply for Logic 12 D3 Data Bus Line /:N 3 - & . 14 15 ction at bit Gperation 16 Power Supply (OV, GND) 17) Power Stipply for LOD Drive 18 S LED Anode Terminal 19 | LEDs | LED Anode Terminal 20 LED- LED Cathode Terminal 21 LED- LED Cathode Terminal 22 Vss Power Supply (OV, GND) F-543873GNC-LW-AJ (Au) No. 2002-S021 OPTREX CORPORATION Page 11/194,.2.Example of Power Supply it is recommended to apply a potentiometer for the contrast adjust due to the tolerance of the driving voltage and its temperature dependence. 4.3.Block Diagram MODULE VLCD Tr VSS Rt VR R2 VLCD (+Voltage} VSS (OY voc |--- VCC (+-Voltage) R1+R2+VR=10~ 20K Row Driver FLM Ni7703 x2 or equivalent 320 Column Driver NT7704 x 3 or equivalent 4 M Circuit VLCD VCC Bias Circuit To LS] rr LED+ LED Backlight _LED- F-54373GNC-LW-AJ (AJ) No, 2002-S021 OPTREX CORPORATION Page 12/195.Test No change on display and in operation under the following test condition. Conditions: Unless otherwise specified, tests will be conducted under the fallowing condition. Temperature: 20+5C Humidity : 65+5% RH tests will be not conducted under functioning state. No. Parameter Conditions Notes 1 High Temperature Operating | 50C+2C, 96hrs (operation state) 2 Low Temperature Operating | 0C+2C, 96hrs (operation state) 1 3 High Temperature Storage 70Cx2C, 96hrs 2 4 Low Temperature Storage -20Cx2C, 96hrs 1,2 5 Damp Proof Test 40C+2C,90~95% RH, 96hrs 1,2 6 Vibration Test Total fixed amplitude : 4.5mm 3 Vibration Frequency : 10~55Hz 7 Shock Test Dropping method corner dropping I F A comer : once E gq D Edge drepping [- B,C,D edge : once 4 5 A Face dropping foun E,F,G face : once , Concrete Surface Note 1 :No dew condensation to be observed. Note 2 :The function test shail be conducted after 4 hours storage at the normal Temperature and humidity after removed from the test chamber. Note 3 :Vibration test will be conducted to the product itself without putting it in a container. F-513738GNC-LW-AJ (Au) No. 2002-S021 OPTREX CORPORATION Page 13/196.Appearance Standards 6.1.Inspection conditions The LCD shall be inspected under 40W white fluorescent light. The distance between the eyes and the sample shall be more than 30cm. All directions for inspecting the sample should be within 45against perpendicular line. 6.2.Definition of applicable Zones PS Bezel Flame A Zone : Active display area B Zone : Area from outside of "A Zone" to validity viewing area C Zone : Rest parts AZone + B Zone = Validity viewing area F-51373GNC-LW-AJ (AJ) No. 2002-S024 OPTREX CORPORATION Page 14/196.3, Standards No, . Parameter 1 Black and White Spots, Foreign Substances and LR/AR Coat Bright point Criteria (1) Round Shape : Zone Acceptable Number Dimension (mm) A B Cc D<0,10 * * 0.10<D<0.15 2 * 0.15 <D <0.20 1 * 0.20<D GQ * D=(Long+Short)/2 *: Disregard {2). Line Shape Zone Acceptable Number X(mm)} \_ Y(mm) A B Cc - Ws0.01 * * L<2.0 le zone Acceptable Number and polarizer) Dimension (mm) A B Cc Ds0.i0 * * 6.10<D <0.15 1 * 0.15 <D <0.20 * D<0.20 0 * *: Disregard F-51373GNC-LW-AJ (AJ) No. 2002-8021 OPTREX CORPORATION Page 15/19No. Parameter Criteria 3 The Shape of Dot | (1) Pin Hole: Dimension Acceptable Number D=0.1 Less than 1 piece / dot less than 3 pieces/ sell 0.1<D30.2 0 vo D = (Long + Short) /2 (2) Lacking, Defermation C(GAP) B > + ita Dimension piece / dot Transformation) Dimnsion(mm) = oh D 0.10 Disregard 0.10<D 30.15 2 0.15<D $0.20 1 0.20<D 0 Color Variation Not to be conspicuous defects. (Without C Zone) Polarizer Scratches, Strake marks Not to be conspicuous defects.(Without C Zone) 8 Polarizer Dirts if the stains are removed easily from LCDP surface, the module is not defective. 9 Distance between Ds0.2 : 20mm or more. (Without C Zone) Different Foreign Substance Defects 10 Overcoat Pin Hole D<0.4 Disregard 0.4<Ds0.6 2 pieces F-S1373GNC-LW-AJ (AJ) No. 2002-8021 OPTREX CORPORATION Page 16/19 aT7.Code System of Production Lot The production lot of module is specified some of the following. oOoOoo ia T | pactory Number (Numeral) | Code (Alphabet) Production Week (1~5) Production Month (1~9, X, Y, Z) Production Year (Lower 2 digits) OO Oo oo im CI | Factory Number (Numeral Production Day of the Week (Sun: A Mon: B~} Factory Code Production Week (1~5) Production Month (1~9, X, Y, Production Year (Lower 2 digi specified as follows. 9.Applying Precautions Piease contact us when questions and/or new problems not specified in this Specifications arise, F-51373GNC-LW-AJ (AJ} No. 2002-S024 OPTREX CORPORATION Page 17/1910.Precautions Relating Product Handling The Following precautions will guide you in handling our product correctly. 1) Liquid crystal display devices 1. The liquid crystal display device panel used in the liquid crystal display module is made of plate glass. Avoid any strong mechanical shock. Should the glass break handle it with care, 2. The polarizer adhering to the surface of the LCD is made of a soft material. Guard against scratching it. 2) Care of the liquid crystal display module against static electricity discharge. 1, When working with the module, be sure to ground your body and any electrical equipment you may be using. We strongly recommend the use of anti static mats { made of rubber ), to protect work tables against the hazards of electrical shock. 2. Avoid the use of work clothing made of synthetic fibers. We recommend cotton clothing or other conductivity-treated fibers. 3. Slowly and carefully remove the protective film from the LCD module, since this operation can generate static electricity. 3) When the LCD module aione must be stored for long periods of time; 1.Protect the modules from high temperature and h 2.Keep the modules out of direct sunlight.o 6) Cotiductivity is not guaranteed for models that use metal holders where solder connections between the metal holder and the PCB are not used, Please contact us to discuss appropriate ways to assure conductivity. 7) For models which use CFL: 1.High voitage of 1000V or greater is applied to the CFL cable connector area. Care should be taken not to touch connection areas to avoid burns. 2.Protect CFL cables from rubbing against the unit and thus causing the wire jacket to become worn. 3. The use of CFLs for extended periods of time at low temperatures will significantly shorten their service life. 8) For medels which use touch panels: 1.Do not stack up modules since they can be damaged by components on neighboring modules. 2,Do not place heavy objects on top of the product. This could cause glass breakage. 9) For models which use COG TAB,or COF: 1.The mechanical strength of the product is low since the IC chip faces out unprotected from the rear. Be sure to protect the rear of the IC chip from external forces. 2.Given the faci that the rear of the IC chip is left exposed, in order to protect the unit from electrical damage, avoid installation configurations in which the rear of the IC chip runs the risk of making any electrical contact. F-51373GNC-LW-AJ (AJ) No. 2002-S021 OPTREX CORPORATION Page 18/1910) Models which use flexible cable, heat seal, or TAB: 1,1n order to maintain reliability, do not touch or hold by the connector area. 2.Avoid any bending, pulling, or other excessive force, which can result in broken connections. 11) have an adverse effect on connecting parts ( LCD panel-TCP / HEAT SEAL / FPC { etc., PCB-TCP / HEAT SEAL / FPC etc., TCP-HEAT SEAL, TCP-FPC, HEAT SEAL-FPC, etc.,) depending on its materials. Please check and evaluate these materials carefully before use. 12) In case of acrylic plate is attached to front side of LCD panel, cloudiness ( very small cracks ) can occur on acrylic plate, being influenced by some components generated trom polarizer film.. Please check and evaluate those acrylic materials carefully before use. 11.Warranty This product has been manufactured to your companys specifications as a part for use in your companys general electronic products. |tis guaranteed to perform a ordingt o delivery specitications. For any other use apart from genera elect f cannot take responsibility if the product is used i in. medi equipment, aerospace equipment, fi which there is a direct risk to huriti ibility for any detd ct, whith may arise from additional uct fificluding disassembly and reassembly), after 2, We cannot accept responsibility for any defect, which may arise after the application of strong external force to the product. 3. We cannot accept responsibility for any defect, which may arise due to the application of static electricity after the product has passed your company's acceptance inspection procedures. 4. When the product is in CFL models, CFL service life and brightness will vary According to the performance of the inverter used, leaks, etc. We cannot accept responsibility for product performance, reliability, or defect, which may arise. 5. We cannot accept responsibility for intellectual property of a third party, which may arise through the application of our product to your assembly with exception to those issues relating directly to the structure or method of manufacturing of our product. 6. Optrex will not be held responsible for any quality guarantee issue for defect products judged as Optrex-origin longer than 2 (two) years from Optrex production or 1 {one) year from Optrex, Opirex America, Optrex Europe, Display LC delivery which ever comes later. F-51373GNC-LW-AJ (AJ) No. 2002-8021 OPTREX CORPORATION Page 19/197 DOT DETAIL (S=20:1) < < 240x(R.G.B)x320 DOTS io cO M =) => 2 |~oO clo al [A oO m rm st S ou col ~ PO.08x(R.G.B)X240 a] 14.240. 4 -0.01=57.59(A.A) SB 3.5 59.0(V.A) tn @73.0 uy) in <i >< S {0.24) ao) 0.07 0.01 0 s [ La T TH Alo ] S PLL (0.7 | (71.5 PARTS AREA) [a l ED Let O o MC Le PO CTT Tg cad SECTION AWA _ ssued on 2002/05/31