AMC DOC. #: AMC79L05_B
December 2001
Copyright 2001, ADD Microtech Corp. 1 www.addmtek.c om
DESCRIPTION FEATURES
The AMC79L05 is a 3-terminal fixed negative-voltage
designed for a wide range of applications. This regulator
can provide local on card regulation, eliminating the
distribution problems associated with single point
regulation. In addition, it can be used with power-pass
elements to make high-current voltage regulators with
100mA output current.
Protection features such as thermal shutdown and current
limiting have been designed internally which will protect
the device from damage in case of overload or
overheating.
! ±
±±
±5% tolerance of output voltage
! Wide input range
! Internal thermal overload protection
! Output current > 100mA
! No External Components
# Short circuit protection
# Available in 3L plastic TO-92 and
plastic 8 pin S.O.I.C.
# Identical pin assignment to earlier
79L05 series.
APPLICATIONS PACKAGE PIN OUT
3-Pin Plastic TO-92
(Top View)
! Logic Systems
! Computer Add-On Cards
! Modem Cards
! Power Suppliers
8-Pin S.O.I.C
Surface Mount
(Top View)
ORDER INFORMATION
Plastic TO-92 Plastic SO-8
TA (OC) LP 3-pin DM 8-pin
0 to 70 AMC79L05LP AMC79L05DM
Note: 1. All surface-mount and TO-92 packages are available in Tape & Reel. Append the letter “T” to part
number (i.e. AMC79L05LPT or AMC79L05DMT).
2. For TO-92 in Tape & Box (without reel), add suffix “TB” (i.e. AMC79L05LPTB).
AMC79L05
100mA / 3-TERMINAL
NEGATIVE VOLTAGE REGULATOR
OUTPUT
INPUT
COMMON
OUTPUT
INPUT
INPUT
NC
NC
INPUT
INPUT
COMMON
A
AA
ADD MICROTECH CORP.
AM C DOC. #: AMC79L05_B AMC79L05
December 2001 100mA / 3-TERMINAL
N
EGATIVE VOLTAGE REGULATOR
Copyright 2001, ADD Microtech Corp. 2 www.addmtek.c om
ABSOLUTE MAXIMUM RATINGS (Note 1)
Input Voltage -30V
Operating free-air temperature range, TA 0OC to 70 OC
Storage temperature range -65OC to 150OC
Lead temperature (soldiering, 10 seconds) 260 OC
Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.
Currents are positive into, negative out of the specified terminal.
THERMAL DATA
LP PACKAGE:
Thermal Resistance-Junction to Ambient, θJA 156 OC/W
DM PACKAGE:
Thermal Resistance-Junction to Ambient, θJA 165 OC/W
Junct ion Tempera ture Cal culation: TJ = TA + (PD × θJA).
The θJA numbers are guidelines for the thermal performance of the device/pc-board system.
All of the above assume no ambient airflow.
AM C DOC. #: AMC79L05_B AMC79L05
December 2001 100mA / 3-TERMINAL
N
EGATIVE VOLTAGE REGULATOR
Copyright 2001, ADD Microtech Corp. 3 www.addmtek.c om
RECOMMENDED OPERATING CONDITIONS
Recommended Operating Conditions
Parameter Symbol Min. Typ. Max. Units
Input Voltage VI -7 -20 V
Output Current IOUT 100 mA
Ope rating V irtual Junction Temperature TJ 0 125
OC
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, these specifications in bold type apply over the operating temperature range of
0OC TJ +150OC, VIN = -10V,IOUT = 40mA,CIN = 0.33µF, COUT= 0.1µF, and are for DC characteristics only. (Low
duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient
temperature.)
AMC79L05
Parameter Symbol Test Co nd itions Min. Typ. Max. Units
TJ = 25 OC -4.8 -5.0 -5.2
-7V VIN -20V, 1mA IOUT 40mA -4.75 -5.25
Output Voltage VOUT
1mA IOUT 70mA -4.75 -5.25 V
-7V VIN -20V,TJ = 25 OC 15 150
Line Regul ation VOI -8V VIN -20V,TJ = 25 OC 100 mV
1mA IOUT 100mA, TJ = 25 OC 20 60
Load Regulat ion VOL 1mA IOUT 40mA, TJ = 25 OC 10 30 mV
Peak Output Current IPEAK TJ = 25 OC 140 mA
Dropout Voltage TJ = 25 OC 1.7 V
TJ = 25 OC 6.6
Quiescent Current IQ TJ = 125 OC 6.0 mA
-8V VIN -20V 1.5
Quiescent Current Change IQ 1mA IOUT 40mA 0.1 mA
Ripple Rejection ( note 2 ) RR f =120Hz, -8V VIN -18V, TJ = 25 OC 41 49 dB
Output Noise Voltage ( note 2 ) VO RMS 10Hz f 100KHz, TJ = 25 OC 40 µV
note 2: These parameters, although guaranteed, are not 100% tested in production prior to shipment
AM C DOC. #: AMC79L05_B AMC79L05
December 2001 100mA / 3-TERMINAL
N
EGATIVE VOLTAGE REGULATOR
Copyright 2001, ADD Microtech Corp. 4 www.addmtek.c om
Note: For TO-92 in tape & reel, refer to TO-92 package
and carrier dimension data for lead dimensions.
3-Pin Plastic TO-92
INCHES MILLIMETERS
MIN TYP MAX MIN TYP MAX
A 0.175 0.180 0.205 4.45 4.57 5.21
B 0.170 0.180 0.210 4.32 4.57 5.33
C 0.125 0.142 0.165 3.18 3.62 4.19
F - 0.015 - - 0.38 -
G - 0.050 - - 1.27 -
J - 0.150 - - 3.81 -
K 0.500 0.580 - 12.70 14.73 -
M - 5º - - 5º -
N - 5º - - 5º -
A
BK
FG
N
C
M
3-Pin Plastic TO-92 Package (Taped and Reeled) and Carrier Dimensions
INCHES MILLIMETERS
MIN TYP MAX MIN TYP MAX
C 0.079 - - 2.00 - -
P 0.480 0.500 0.520 12.2 12.7 13.2
Po 0.488 0.500 0.512 12.4 12.7 13.0
Do 0.150 0.157 0.165 3.8 4.0 4.2
P1 0.230 0.250 0.256 5.85 6.35 6.85
Fo 0.165 0.197 0.220 4.2 5.0 5.6
W 0.669 0.709 0.748 17.0 18.0 19.0
Ho 0.610 0.630 0.649 15.5 16.0 16.5
Wo 0.224 0.236 0.248 5.7 6.0 6.3
W1 0.335 0.354 0.374 8.5 9.0 9.5
Po
C
F1
Fo
Do
Wo
W1
P1 P
Ho
W
Note: For 3L TO92, 2,000 units per Reel
AM C DOC. #: AMC79L05_B AMC79L05
December 2001 100mA / 3-TERMINAL
N
EGATIVE VOLTAGE REGULATOR
Copyright 2001, ADD Microtech Corp. 5 www.addmtek.c om
8-Pin Plastic S.O.I.C.
INCHES MILLIMETERS
MIN TYP MAX MIN TYP MAX
A 0.183 - 0.202 4.65 - 5.13
B 0.144 - 0.163 3.66 - 4.14
C 0.068 - 0.074 1.73 - 1.88
D 0.010 - 0.020 0.25 - 0.51
F 0.015 - 0.035 0.38 - 0.89
G 0.050 BSC 1.27 BSC
J 0.007 - 0.010 0.19 - 0.25
K 0.005 - 0.010 0.13 - 0.25
L 0.189 - 0.205 4.80 - 5.21
M - - 8º - -
P 0.228 - 0.244 5.79 - 6.20
SEATING PLAN
A
D
F
P
B
K
C
M
L
J
G
Note: for 8 pin S.O.I.C., 100 units per tube
AM C DOC. #: AMC79L05_B AMC79L05
December 2001 100mA / 3-TERMINAL
N
EGATIVE VOLTAGE REGULATOR
Copyright 2001, ADD Microtech Corp. 6 www.addmtek.c om
IMPORTANT NOTICE
ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit
product or service without notice, and advises its customers to obtain the latest version of relevant information to
verify, before placing orders, that the information being relied on is current.
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe
property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or
warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of
ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize
risks associated with the customer’s applications, the customer should provide adequate design and operating
safeguards.
ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance
of its products to the specifications applicable at the time of sale.
U.S. Asia Pacific region
ADD Microtech Inc.
492 Altamont Drive
Milpitas, CA 95035
ADD Microtech Corp
3F, 132, Sec. 4, Chung Hsiao E. Rd.,
Taipei, Taiwan
TEL: (408) 9410420 TEL: 2-27760166
FAX: (408) 9410864 FAX: 2-27764208