2 mm x 5 mm Rectangular LED Lamps HLMP-S100 HLMP-S201 HLMP-S301 HLMP-S400 HLMP-S401 HLMP-S501 HLMP-S600 Technical Data Features * Rectangular Light Emitting Surface * Excellent for Flush Mounting on Panels * Choice of Five Bright Colors * Long Life: Solid State Reliability * Excellent Uniformity of Light Output Description The HLMP-S100, -S201, -5301, -S400, -S401, -S501, -S600 are epoxy encapsulated lamps in rectangular packages which are easily stacked in arrays or used for discrete front panel indicators. Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process. The HLMP-S100 uses double heterojunction (DH) absorbing substrate (AS) aluminum gallium arsenide (AlGaAs) LEDs to produce outstanding light output over a wide range of drive currents. Package Dimensions 2 Selection Guide Color AlGaAs Red HER Orange Yellow Green Emerald Green[1] Part Number HLMP-S100 HLMP-S201 HLMP-S201-D00xx HLMP-S201-E00xx HLMP-S201-EF0xx HLMP-S400 HLMP-S401 HLMP-S301 HLMP-S301-B00xx HLMP-S301-C00xx HLMP-S301-CDBxx HLMP-S501 HLMP-S501-C00xx HLMP-S501-D00xx HLMP-S501-DE0xx HLMP-S600-A00xx Luminous Intensity Iv (mcd) at 20 mA Min. Typ. Max. 3.4 7.5 - 2.1 3.4 3.4 2.1 3.4 3.5 7.5 7.5 3.5 7.5 - - 10.8 - - 1.4 2.2 2.2 2.1 4.0 4.0 - - 7.2 2.6 4.2 4.2 1.0 4.0 8.0 8.0 3.0 - - 13.4 - Note: 1. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation. Part Numbering System HLMP - S x xx - x x x xx Mechanical Option 00: Bulk 02: Tape & Reel, Straight Leads DG: Ammo Pack Color Bin Options 0: Full Color Bin Distribution B: Color Bins 2 & 3 only Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Brightness Level 00: Less Brightness 01: Higher Brightness Color Options 1: AlGaAs Red 2: GaP HER 3: GaP Yellow 4: GaP Orange 5: GaP Green 6: GaP Emerald Green 3 Electrical/Optical Characteristics at TA = 25C Sym. Description 21/2 Included Angle Between Half Luminous Intensity Points PEAK Peak Wavelength Device HLMP- Min. Typ. Max. Units All 110 Deg. AlGaAs Red High Efficiency Red Orange Yellow Green Emerald Green 645 635 600 583 565 558 nm Measurement at Peak See Note 2 Time const, e-t/s d Dominant Wavelength AlGaAs Red High Efficiency Red Orange Yellow Green Emerald Green 637 626 602 585 569 560 nm s Speed of Response AlGaAs Red High Efficiency Red Orange Yellow Green Emerald Green 30 90 280 90 500 3100 ns C Capacitance AlGaAs Red High Efficiency Red Orange Yellow Green Emerald Green 30 11 4 15 18 35 pF All 260 C/W RJ-PIN Thermal Resistance Test Conditions VF Forward Voltage AlGaAs Red HER/Orange Yellow Green/Emerald Green 1.6 1.5 1.5 1.5 VR Reverse Breakdown Voltage All 5.0 V Luminous Efficacy AlGaAs Red High Efficiency Red Orange Yellow Green Emerald Green 1.8 1.9 2.1 2.2 80 145 380 500 595 656 2.2 2.6 2.6 3.0 IF = 20 mA See Note 1 VF = 0; f = 1 MHz Junction to Cathode Lead at Seating Plane V IF = 20 mA V IR = 100 A lumens/ watt See Note 3 Notes: 1. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 4. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation. 4 Absolute Maximum Ratings at TA = 25C Parameter Peak Forward Current [1] Average Forward Current DC Current[2] Yellow Green/ Emerald Green Units 90 60 90 mA 20 25 20 25 mA 30 30 20 30 mA AlGaAs Red High Efficiency Red/Orange 300 [3] Transient Forward Current (10 sec Pulse) 500 LED Junction Temperature 110 Operating Temperature Range -20 to +100 Storage Temperature Range -55 to +100 mA 110 110 -55 to +100 -55 to +100 110 C -20 to +100 C -55 to +100 Lead Soldering Temperature [1.6 mm (0.063 in.) below seating plane] 260C for 5 seconds Notes: 1. See Figure 5 to establish pulsed operating conditions. 2. For AlGaAs Red, Red, Orange, and Green series derate linearly from 50C at 0.5 mA/C. For Yellow series derate linearly from 50C at 0.34 mA/C. 3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wire bond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. 1.0 ORANGE RELATIVE INTENSITY EMERALD GREEN AlGaAs RED HIGH PERFORMANCE GREEN TA = 25 C HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 WAVELENGTH - nm Figure 1. Relative Intensity vs. Wavelength. 700 5 Figure 2. Forward Current vs. Forward Voltage Characteristics. VF (300 mA) for AlGaAs Red = 2.6 Volts Typical. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 5. Maximum Tolerable Peak Current vs. Peak Duration. (IPEAK MAX Determined from Temperature Derated IDC MAX). Figure 6. Relative Luminous Intensity vs. Angular Displacement. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. LED Peak Current. v (300 mA) for AlGaAs Red = 0.7. 6 Intensity Bin Limits Color Red/Orange Yellow Bin D E F G H I J K L M N O P Q R S T U V W X Y Z B C D E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 1.6 2.5 2.5 4.0 4.0 6.5 6.5 10.3 10.3 16.6 16.6 26.5 26.5 42.3 42.3 67.7 67.7 108.2 108.2 173.2 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0 7 Intensity Bin Limits, continued Color Green/ Emerald Green Bin A B C D E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 1.1 1.8 1.8 2.9 2.9 4.7 4.7 7.6 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0 Maximum tolerance for each bin limit is 18%. Color Categories Color Emerald Green Green Yellow Orange Category # 9 8 7 6 6 5 4 3 2 1 3 2 4 5 1 2 3 4 5 6 7 8 Lambda (nm) Min. Max. 552.5 555.5 555.5 558.5 558.5 561.5 561.5 564.5 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 597.0 599.5 599.5 602.0 602.0 604.5 604.5 607.5 607.5 610.5 610.5 613.5 613.5 616.5 616.5 619.5 Tolerance for each bin limit is 0.5 nm. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag DG Ammo Pack, straight leads with minimum increment 2K/pack Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.semiconductor.agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. September 24, 2001 Obsoletes 5988-0381EN 5988-4202EN