74LVC1G11
Single 3-input AND gate
Rev. 10 — 19 July 2017 Product data sheet
1 General description
The 74LVC1G11 provides a single 3-input AND gate.
The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of
this device in a mixed 3.3 V and 5 V environment.
Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise
and fall time.
This device is fully specified for partial power-down applications using IOFF. The IOFF
circuitry disables the output, preventing the damaging backflow current through the
device when it is powered down.
2 Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V
5 V tolerant inputs for interfacing with 5 V logic
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8-B/JESD36 (2.7 V to 3.6 V)
±24 mA output drive (VCC = 3.0 V)
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Multiple package options
Specified from -40 °C to +85 °C and -40 °C to +125 °C
3 Ordering information
Table 1. Ordering information
PackageType number
Temperature
range
Name Description Version
74LVC1G11GW -40 °C to +125 °C SC-88 plastic surface-mounted package; 6 leads SOT363
74LVC1G11GV -40 °C to +125 °C SC-74 plastic surface-mounted package (TSOP6); 6 leads SOT457
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
2 / 19
PackageType number
Temperature
range
Name Description Version
74LVC1G11GM -40 °C to +125 °C XSON6 plastic extremely thin small outline package;
no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
SOT886
74LVC1G11GF -40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 x 1 x 0.5 mm
SOT891
74LVC1G11GN -40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm
SOT1115
74LVC1G11GS -40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm
SOT1202
74LVC1G11GX -40 °C to +125 °C X2SON6 plastic thermal extremely thin small outline package;
no leads; 6 terminals; body 1 x 0.8 x 0.35 mm
SOT1255
4 Marking
Table 2. Marking
Type number Marking code [1]
74LVC1G11GW VU
74LVC1G11GV V11
74LVC1G11GM VU
74LVC1G11GF VU
74LVC1G11GN VU
74LVC1G11GS VU
74LVC1G11GX VU
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5 Functional diagram
001aac033
A
B
C
1
3 4
Y
6
Figure 1.  Logic symbol
001aac029
&
4
1
3
6
Figure 2.  IEC logic symbol
001aac030
A
B
C
Y
Figure 3.  Logic diagram
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
3 / 19
6 Pinning information
6.1 Pinning
74LVC1G11
A C
GND
B Y
001aac032
1
2
3
6
VCC
5
4
Figure 4.  Pin configuration SOT363 and SOT457
74LVC1G11
GND
001aac849
A
B
VCC
C
Y
Transparent top view
2
3
1
5
4
6
Figure 5.  Pin configuration SOT886
74LVC1G11
GND
001aaf200
A
B
VCC
C
Y
Transparent top view
2
3
1
5
4
6
Figure 6.  Pin configuration SOT891, SOT1115 and
SOT1202
6
VCCGND
4
1
3
2
A C
B Y
5
74LVC1G11
Transparent top view
aaa-019825
Figure 7.  Pin configuration SOT1255 (X2SON6)
6.2 Pin description
Table 3. Pin description
Symbol Pin Description
A 1 data input
GND 2 ground (0 V)
B 3 data input
Y 4 data output
VCC 5 supply voltage
C 6 data input
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
4 / 19
7 Functional description
Table 4. Function table [1]
Input Output
ABCY
HHHH
L X X L
X L X L
X X L L
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care.
8 Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage -0.5 +6.5 V
IIK input clamping current VI < 0 V -50 - mA
VIinput voltage [1] -0.5 +6.5 V
IOK output clamping current VO > VCC or VO < 0 V - ±50 mA
Active mode [1] [2] -0.5 VCC + 0.5 VVOoutput voltage
Power-down mode [1] [2] -0.5 +6.5 V
IOoutput current VO = 0 V to VCC - ±50 mA
ICC supply current - 100 mA
IGND ground current -100 - mA
Ptot total power dissipation Tamb = -40 °C to +125 °C [3] - 250 mW
Tstg storage temperature -65 +150 °C
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For SC-88 and SC-74 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
For X2SON6 and XSON6 package: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
5 / 19
9 Recommended operating conditions
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
VCC supply voltage 1.65 - 5.5 V
VIinput voltage 0 - 5.5 V
Active mode 0 - VCC VVOoutput voltage
Power-down mode; VCC = 0 V 0 - 5.5 V
Tamb ambient temperature -40 - +125 °C
VCC = 1.65 V to 2.7 V - - 20 ns/VΔt/ΔV input transition rise and fall rate
VCC = 2.7 V to 5.5 V - - 10 ns/V
10 Static characteristics
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
-40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions
Min Typ [1] Max Min Max
Unit
VCC = 1.65 V to 1.95 V 0.65VCC - - 0.65VCC - V
VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - V
VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V
VIH HIGH-level
input voltage
VCC = 4.5 V to 5.5 V 0.7VCC - - 0.7VCC - V
VCC = 1.65 V to 1.95 V - - 0.35VCC - 0.35VCC V
VCC = 2.3 V to 2.7 V - - 0.7 - 0.7 V
VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V
VIL LOW-level
input voltage
VCC = 4.5 V to 5.5 V - - 0.3VCC - 0.3VCC V
VI = VIH or VIL
IO = -100 μA;
VCC = 1.65 V to 5.5 V
VCC - 0.1 - - VCC - 0.1 - V
IO = -4 mA; VCC = 1.65 V 1.2 1.54 - 0.95 - V
IO = -8 mA; VCC = 2.3 V 1.9 2.15 - 1.7 - V
IO = -12 mA; VCC = 2.7 V 2.2 2.50 - 1.9 - V
IO = -24 mA; VCC = 3.0 V 2.3 2.62 - 2.0 - V
VOH HIGH-level
output voltage
IO = -32 mA; VCC = 4.5 V 3.8 4.11 - 3.4 - V
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
6 / 19
-40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions
Min Typ [1] Max Min Max
Unit
VI = VIH or VIL
IO = 100 μA;
VCC = 1.65 V to 5.5 V
- - 0.10 - 0.10 V
IO = 4 mA; VCC = 1.65 V - 0.07 0.45 - 0.70 V
IO = 8 mA; VCC = 2.3 V - 0.12 0.30 - 0.45 V
IO = 12 mA; VCC = 2.7 V - 0.17 0.40 - 0.60 V
IO = 24 mA; VCC = 3.0 V - 0.33 0.55 - 0.80 V
VOL LOW-level
output voltage
IO = 32 mA; VCC = 4.5 V - 0.39 0.55 - 0.80 V
IIinput leakage
current
VI = 5.5 V or GND;
VCC = 0 V to 5.5 V
- ±0.1 ±1 - ±1 μA
IOFF power-off
leakage
current
VI or VO = 5.5 V; VCC = 0 V - ±0.1 ±2 - ±2 μA
ICC supply current VI = 5.5 V or GND; IO = 0 A;
VCC = 1.65 V to 5.5 V
- 0.1 4 - 4 μA
ΔICC additional
supply current
VI = VCC - 0.6 V; IO = 0 A;
VCC = 2.3 V to 5.5 V; per pin
- 5 500 - 5 00 μA
CIinput
capacitance
VCC = 3.3 V; VI = GND to VCC - 4 - - - pF
[1] All typical values are measured at Tamb = 25 °C.
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
7 / 19
11 Dynamic characteristics
Table 8. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9.
-40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions
Min Typ [1] Max Min Max
Unit
A, B and C to Y; see Figure 8 [2]
VCC = 1.65 V to 1.95 V 1.5 4.7 17.2 1.5 21.5 ns
VCC = 2.3 V to 2.7 V 1.0 3.0 6.2 1.0 7.8 ns
VCC = 2.7 V 1.0 3.0 6.0 1.0 7.5 ns
VCC = 3.0 V to 3.6 V 1.0 2.6 4.9 1.0 6.2 ns
tpd propagation delay
VCC = 4.5 V to 5.5 V 1.0 1.9 3.5 1.0 4.4 ns
CPD power dissipation
capacitance
VI = GND to VCC; VCC = 3.3 V [3] - 13 - - - pF
[1] Typical values are measured at Tamb = 25 °C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in μW).
PD = CPD x VCC
2 x fi x N + Σ(CL x VCC
2 x fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL x VCC
2 x fo) = sum of the outputs.
11.1 Waveform and test circuit
001aac031
A, B, C
input
VI
GND
VOH
VOL
Y output
VM
tPHL tPLH
VM
Measurement points are given in Table 9.
VOL and VOH are typical output voltage levels that occur with the output load.
Figure 8.  The input (A, B, C) to output (Y) propagation delays
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
8 / 19
Table 9. Measurement points
Supply voltage Input Output
VCC VMVM
1.65 V to 1.95 V 0.5VCC 0.5VCC
2.3 V to 2.7 V 0.5VCC 0.5VCC
2.7 V 1.5 V 1.5 V
3.0 V to 3.6 V 1.5 V 1.5 V
4.5 V to 5.5 V 0.5VCC 0.5VCC
VEXT
VCC
VIVO
mna616
DUT
CL
RT
RL
RL
G
Test data is given in Table 10.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Figure 9.  Test circuit for measuring switching times
Table 10. Test data
Supply voltage Input Load VEXT
VCC VItr = tfCLRLtPLH, tPHL
1.65 V to 1.95 V VCC ≤ 2.0 ns 30 pF 1 kΩ open
2.3 V to 2.7 V VCC ≤ 2.0 ns 30 pF 500 Ω open
2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open
3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open
4.5 V to 5.5 V VCC ≤ 2.5 ns 50 pF 500 Ω open
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
9 / 19
12 Package outline
Figure 10.  Package outline SOT363 (SC-88)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
10 / 19
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT457 SC-74
w BM
bp
D
e
pin 1
index A
A1
Lp
Q
detail X
HE
E
vMA
AB
y
scale
c
X
1 32
456
0 1 2 mm
Plastic surface-mounted package (TSOP6); 6 leads SOT457
UNIT A1bpc D EHELpQ ywv
mm 0.1
0.013
0.40
0.25
3.1
2.7
0.26
0.10
1.7
1.3
e
0.95 3.0
2.5 0.2 0.10.2
DIMENSIONS (mm are the original dimensions)
0.6
0.2
0.33
0.23
A
1.1
0.9
05-11-07
06-03-16
Figure 11.  Package outline SOT457 (SC-74)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
11 / 19
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT886 MO-252
sot886_po
04-07-22
12-01-05
Unit
mm
max
nom
min
0.5 0.04 1.50
1.45
1.40
1.05
1.00
0.95
0.35
0.30
0.27
0.40
0.35
0.32
0.6
A(1)
Dimensions (mm are the original dimensions)
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886
A1b
0.25
0.20
0.17
D E e e1
0.5
L L1
terminal 1
index area
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
1
6
2
5
3
4
6x
(2)
4x
(2)
A
Figure 12.  Package outline SOT886 (XSON6)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
12 / 19
terminal 1
index area
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT891
SOT891
05-04-06
07-05-15
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
mm 0.20
0.12
1.05
0.95
0.35
0.27
A1
max b E
1.05
0.95
D e e1L
0.40
0.32
L1
0.350.55
A
max
0.5 0.04
1
6
2
5
3
4
A
6×
(1)
4×
(1)
Note
1. Can be visible in some manufacturing processes.
Figure 13.  Package outline SOT891 (XSON6)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
13 / 19
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1115
sot1115_po
10-04-02
10-04-07
Unit
mm
max
nom
min
0.35 0.04 0.95
0.90
0.85
1.05
1.00
0.95
0.55 0.3
0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm SOT1115
A1b
0.20
0.15
0.12
D E e e1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
L1
b
321
6 5 4
(6×)(2)
A1A
Figure 14.  Package outline SOT1115 (XSON6)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
14 / 19
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1202
sot1202_po
10-04-02
10-04-06
Unit
mm
max
nom
min
0.35 0.04 1.05
1.00
0.95
1.05
1.00
0.95
0.55 0.35
0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm SOT1202
A1b
0.20
0.15
0.12
D E e e1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
b
1 2 3
L1
6 5 4
(6×)(2)
A
A1
Figure 15.  Package outline SOT1202 (XSON6)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
15 / 19
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1255
sot1255_po
15-07-20
15-07-22
Unit
mm
max
nom
min
0.35 0.04 0.30 0.85
0.20 0.10 0.05
A
Dimensions (mm are the original dimensions)
X2SON6: plastic thermal enhanced extremely thin small outline package; no leads;
6 terminals; body 1.0 x 0.8 x 0.35 mm SOT1255
A1D
1.05
DhE e1e2b
0.25
L v y
0.05
y1
0.32 0.02 0.25 0.80 0.60 0.401.00
0.170.220.30 0.00 0.22 0.750.95
0.250.30
0 1 mm
scale
A B
pin 1
ID area
X
L
(4x)
e1
1 6
Dh
(2x)
3 4
52
e2
AB
v
D
E
C
y
C
y1
detail X
A
A1
b
(4x)
Figure 16.  Package outline SOT1255 (X2SON6)
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
16 / 19
13 Abbreviations
Table 11. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
TTL Transistor-Transistor Logic
14 Revision history
Table 12. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74LVC1G11 v.10 20170719 Product data sheet - 74LVC1G11 v.9
Modifications: The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
Legal texts have been adapted to the new company name where appropriate.
74LVC1G11 v.9 20161128 Product data sheet - 74LVC1G11 v.8
Modifications: Table 7: The maximum limits for leakage current and supply current have changed.
74LVC1G11 v.8 20150917 Product data sheet - 74LVC1G11 v.7
Modifications: Added type number 74LVC1G11GX (SOT1255/X2SON6).
74LVC1G11 v.7 20120704 Product data sheet - 74LVC1G11 v.6
Modifications: Package outline drawing of SOT886 (Figure 12) modified.
74LVC1G11 v.6 20111209 Product data sheet - 74LVC1G11 v.5
Modifications: Legal pages updated.
74LVC1G11 v.5 20100730 Product data sheet - 74LVC1G11 v.4
74LVC1G11 v.4 20070801 Product data sheet - 74LVC1G11 v.3
74LVC1G11 v.3 20060906 Product data sheet - 74LVC1G11 v.2
74LVC1G11 v.2 20050503 Product data sheet - 74LVC1G11 v.1
74LVC1G11 v.1 20041130 Product data sheet - -
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
17 / 19
15 Legal information
15.1 Data sheet status
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product
development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local Nexperia
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Notwithstanding any damages that
customer might incur for any reason whatsoever, Nexperia's aggregate and
cumulative liability towards customer for the products described herein shall
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification. Customers are responsible for the
design and operation of their applications and products using Nexperia
products, and Nexperia accepts no liability for any assistance with
applications or customer product design. It is customer’s sole responsibility
to determine whether the Nexperia product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
any liability related to any default, damage, costs or problem which is based
on any weakness or default in the customer’s applications or products, or
the application or use by customer’s third party customer(s). Customer is
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Nexperia 74LVC1G11
Single 3-input AND gate
74LVC1G11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 10 — 19 July 2017
18 / 19
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications. In the event that customer
uses the product for design-in and use in automotive applications to
automotive specifications and standards, customer (a) shall use the product
without Nexperia's warranty of the product for such automotive applications,
use and specifications, and (b) whenever customer uses the product for
automotive applications beyond Nexperia's specifications such use shall be
solely at customer’s own risk, and (c) customer fully indemnifies Nexperia
for any liability, damages or failed product claims resulting from customer
design and use of the product for automotive applications beyond Nexperia's
standard warranty and Nexperia's product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Nexperia 74LVC1G11
Single 3-input AND gate
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© Nexperia B.V. 2017. All rights reserved.
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 19 July 2017
Document identifier: 74LVC1G11
Contents
1 General description ............................................ 1
2 Features and benefits .........................................1
3 Ordering information .......................................... 1
4 Marking .................................................................2
5 Functional diagram ............................................. 2
6 Pinning information ............................................ 3
6.1 Pinning ............................................................... 3
6.2 Pin description ................................................... 3
7 Functional description ........................................4
8 Limiting values ....................................................4
9 Recommended operating conditions ................ 5
10 Static characteristics .......................................... 5
11 Dynamic characteristics .....................................7
11.1 Waveform and test circuit ..................................7
12 Package outline ...................................................9
13 Abbreviations .................................................... 16
14 Revision history ................................................ 16
15 Legal information ..............................................17