MASWSS0136SMB - M/A-Com Technology Solutions

GaAs SPDT Switch

DC - 3.0 GHz

Rev. V2

MASWSS0136

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Low Insertion Loss: 0.4 dB @ 2.4 GHz

 Moderate Isolation: 27 dB @ 2.4 GHz

 Low Power Consumption: 5 μA @ +3.0 V

 Lead-Free SC-70 (SOT-363) Package

 100% Matte Tin Plating over Copper

 Halogen-Free ―Green‖ Mold Compound

 RoHS* Compliant and 260°C Reflow Compatible

Description

M/A-COM’s MASWSS0136 is a GaAs PHEMT

MMIC SPDT switch in a lead-free SC-70 (SOT-363)

surface mount plastic package. The MASWSS0136

is ideally suited for applications where very small

size and low cost are required.

Typical applications are transmit / receive (Tx / Rx)

switching in linear systems such as WLAN 802.11b/

g. Other applications include 1.9 GHz and 2.4 GHz

DECT and linear systems operating up to 3.0 GHz.

The MASWSS0136 is fabricated using a 0.5 micron

gate length GaAs PHEMT process. The process

features full passivation for performance and

reliability.

Functional Schematic

Pin No. Pin Name Description

1 RF1 RF Port 1

2 GND Ground

3 RF2 RF Port 2

4 V2 Control 2

5 RFC RF Input

6 V1 Control 1

Pin Configuration

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Parameter Absolute Maximum

Input Power (0.5 - 3.0 GHz)

3 V Control +30 dBm

Voltage -8.5 V < Vc < +8.5 V

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

Absolute Maximum Ratings 2,3

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

V1 RFC V2

C = 39 pF

RF1 GND RF2

C = 39 pFC = 39 pF

Pin 1

Part Number Package

MASWSS0136 Bulk packaging

MASWSS0136TR-3000 3000 piece reel

MASWSS0136SMB Sample Board

1. Reference Application Note M513 for reel size information.

Ordering Information1

GaAs SPDT Switch

DC - 3.0 GHz

Rev. V2

MASWSS0136

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50  4

Qualification

Qualified to M/A-COM specification REL-201, Proc-

ess Flow –2.

Handling Procedures

The following precautions should be observed to

avoid damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be dam-

aged by static electricity. Proper ESD control tech-

niques should be used when handling these de-

vices.

Truth Table 6,7

Control V1 Control V2 RFC-RF1 RFC-RF2

0 1 On Off

1 0 Off On

6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V

minimum and must not exceed 8.5 V.

7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V

Lead-Free SC-70 (SOT-363)†

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss5 1.0 GHz

2.4 GHz

—

0.3

0.4

—

0.5

Isolation 1.0 GHz

2.4 GHz

—

VSWR 0.05 - 3.0 GHz Ratio — 1.2:1 —

IP2 Two Tone, +5 dBm / Tone, 5 MHz Spacing

2.4 GHz

dBm

—

IP3 Two Tone, +5 dBm / Tone, 5 MHz Spacing

2.4 GHz

dBm

—

Linear Pout

2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5%

3.0 V

3.3 V

5.0 V

dBm

—

22.5

24.0

28.5

—

P1dB — dBm — 28 —

Trise, Tfall 10% to 90% RF and 90% to 10% RF nS — 35 —

Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS — 40 —

Transients — mV — 10 —

Current VC = 3.0 V µA — 5 10

4. For positive voltage control, external DC blocking capacitors are required on all RF ports.

5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz.

† Reference Application Note M538 for lead-free solder reflow

recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

GaAs SPDT Switch

DC - 3.0 GHz

Rev. V2

MASWSS0136

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Isolation

Typical Performance Curves

Insertion Loss

VSWR EVM vs. Pout @ 2.5 GHz

0.0

0.2

0.4

0.6

0.8

0.5 1.0 1.5 2.0 2.5 3.0

+25°C

-40°C

+85°C

Frequency (GHz)

0.5 1.0 1.5 2.0 2.5 3.0

+25°C

-40°C

+85°C

Frequency (GHz)

1.00

1.25

1.50

1.75

2.00

0.5 1.0 1.5 2.0 2.5 3.0

+25°C

-40°C

+85°C

Frequency (GHz)

10 15 20 25 30 35

EVM @ 3 V

EVM @ 3.3 V

EVM @ 5 V

Pout (dBm)

GaAs SPDT Switch

DC - 3.0 GHz

Rev. V2

MASWSS0136

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.