2N2222AHR Hi-Rel 40 V, 0.8 A NPN transistor Datasheet -- production data Features Parameter BVCEO min ESCC 1 JANS 40 V 2 3 50 V IC (max) 0.8 A hFE at 10 V - 150 mA 100 TO-18 3 3 4 1 1 2 2 * Hermetic packages LCC-3UB LCC-3 * ESCC and JANS qualified Pin 4 in LCC-3UB is connected to the metallic lid. * Up to 100 krad(Si) low dose ratee Figure 1. Description Internal schematic diagramI The 2N2222AHR is a silicon planar NPN transistor specifically designed and housed in hermetic packages for aerospace and Hi-Rel applications. It is available in the JAN qualification system (MIL-PRF19500 compliance) and in the ESCC qualification system (ESCC 5000 compliance). In case of discrepancies between this datasheet and the relevant agency specification, the latter takes precedence. Table 1. Devices summary Device Qualification Agency spec. Package Radiation level EPPL JANS MIL-PRF-19500/255 LCC-3UB - - JANSR2N2222AUBx 100 krad - 2N2222AUBxx - Yes 100 krad Yes 2N2222ARUBx 100 krad Target SOC2222AHRB - Yes 100 krad Yes SOC2222ARHRx 100 krad Target 2N2222AHR - - 100 krad - 100 krad - JANS2N2222AUBx 2N2222AUBxxSW SOC2222AxxSW LCC-3UB ESCC 5201/002 2N2222ASW TO-18 2N2222ARHRx February 2013 This is information on a product in full production. LCC-3 Doc ID 16558 Rev 10 1/19 www.st.com 19 Content 2N2222AHR Content 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 JANS electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 ESCC electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.4 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7 2/19 6.1 Data code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Doc ID 16558 Rev 10 2N2222AHR 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter VCBO VCEO VEBO IC PTOT TSTG TJ Value Unit Collector-base voltage (IE = 0) 75 V Collector-emitter voltage (IB = 0) for JANS devices 50 V Collector-emitter voltage (IB = 0) for ESCC devices 40 V Emitter-base voltage (IC = 0) 6 V Collector current 0.8 A Total dissipation at Tamb 25 C ESCC: TO-18 LCC-3 and LCC-3UB LCC-3 and LCC-3UB (1) JANS: LCC-3UB 0.5 0.5 0.73 0.5 Total dissipation at Tcase 25 C ESCC: TO-18 1.8 Total dissipation at Tsp(IS) = 25 C JANS: LCC-3UB 1 W -65 to 200 C 200 C Storage temperature Max. operating junction temperature W 1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. Table 3. Symbol RthJC RthJSP(IS) RthJA Thermal data LCC-3 LCC-3UB TO-18 Thermal resistance junction-case (max) for JANS - - Thermal resistance junction-case (max) for ESCC - 97 Thermal resistance junction-solder pad (infinite sink) (max) for JANS 90 - Thermal resistance junction-solder pad (infinite sink) (max) for ESCC - - Thermal resistance junction-ambient (max) for JANS 325 - Thermal resistance junction-ambient (max) for ESCC 350 240(1) 350 Parameter Unit C/W 1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. Doc ID 16558 Rev 10 3/19 Electrical characteristics 2 2N2222AHR Electrical characteristics JANS and ESCC version of the products are assembled and tested in compliance with the agency specification it is qualified in. The electrical characteristics of each version are provided in dedicated tables. Tcase = 25 C unless otherwise specified. 2.1 JANS electrical characteristics Table 4. JANS electrical characteristics Symbol Parameter Test conditions Typ. Max. Unit - 10 10 10 A nA A Collector cut-off current (IE = 0) VCB = 75 V VCB = 60 V VCB= 60 V ICES Collector cut-off current (IE = 0) VCE = 50 V - 50 nA IEBO Emitter cut-off current (IC = 0) VEB = 6 V VEB = 4 V - 10 10 A nA ICBO Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) Tamb = 150 C IC = 10 mA 50 - V VCE(sat) (1) Collector-emitter saturation voltage IC = 150 mA IC = 500 mA IB = 15 mA IB = 50 mA Base-emitter saturation voltage IC = 150 mA IC= 500 mA IB = 15 mA IB = 50 mA 0.6 (1) DC current gain IC = 0.1 mA IC = 1 mA IC = 10 mA IC = 150 mA IC = 500 mA IC = 10 mA Tamb = -55 C VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V 50 75 100 100 30 35 2.5 hfe VCE = 20 V f = 100 MHz VCE = 10 V f = 1 kHz IC = 20 mA Small signal current gain IC =1 mA 50 Cobo Output capacitance (IE = 0) VCB = 10 V 100 kHz f 1 MHz - 8 pF Cibo Output capacitance (IE = 0) VEB = 0.5 V 100 kHz f 1 MHz - 25 pF VBE(sat) hFE (1) 4/19 Min. Doc ID 16558 Rev 10 - 0.3 1 V V 1.2 2 V V 325 - 300 - 2N2222AHR Electrical characteristics Table 4. Symbol JANS electrical characteristics (continued) Parameter Test conditions ton Turn-on time VCC = 30 V IB1 = 15 mA toff Turn-off time VCC = 30 V IC = 150 mA IB1 = -IB2 = 15 mA Min. IC = 150 mA Typ. Max. Unit - 35 ns - 300 ns Typ. Max. Unit - 10 10 nA A - 10 nA 1. Pulsed duration = 300 s, duty cycle 2 % 2.2 ESCC electrical characteristics Table 5. Symbol ESCC electrical characteristics Parameter Test conditions Min. ICBO Collector cut-off current (IE = 0) VCB = 60 V VCB = 60 V IEBO Emitter cut-off current (IC = 0) VEB = 3 V Collector-base breakdown voltage (IE = 0) IC = 100 A 75 - V Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) IC = 30 mA 40 - V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = 100 A 6 - V VCE(sat) (1) Collector-emitter saturation voltage IC = 150 mA IB = 15 mA - 0.3 V VBE(sat) (1) Base-emitter saturation voltage IC = 150 mA IB = 15 mA 0.87 1.2 V DC current gain IC = 0.1 mA IC = 10 mA IC = 150 mA IC = 500 mA IC = 10 mA Tamb = -55 C VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V V(BR)CBO hFE (1) Tamb = 150 C - 300 35 hfe Small signal current gain VCE = 20 V f = 100 MHz Cobo Output capacitance (IE = 0) VCB = 10 V 100 kHz f 1 MHz Doc ID 16558 Rev 10 35 75 100 40 IC = 20 mA 3 - 10 - 8 pF 5/19 Electrical characteristics Table 5. 2N2222AHR ESCC electrical characteristics (continued) Symbol Parameter Test conditions Min. ton Turn-on time VCC = 30 V IB1 = 15 mA IC = 150 mA toff Turn-off time VCC = 30 V IC = 150 mA IB1 = -IB2 = 15 mA Typ. Max. Unit - 35 ns - 285 ns 1. Pulsed duration = 300 s, duty cycle 2 % 2.3 Electrical characteristics (curves) Figure 2. DC current gain Figure 3. Collector emitter saturation voltage ( K)( 9&( 9 & & & & & & ,F $ Figure 4. $0Y Base emitter saturation voltage K)( & & & ,F $ 6/19 $0Y Doc ID 16558 Rev 10 ,F $ $0Y 2N2222AHR 2.4 Electrical characteristics Test circuits Figure 5. JANS saturated turn-on switching time test circuit Figure 6. JANS saturated turn-off switching time test circuit Doc ID 16558 Rev 10 7/19 Electrical characteristics Figure 7. 2N2222AHR ESCC resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 8/19 Doc ID 16558 Rev 10 2N2222AHR 3 Radiation hardness assurance Radiation hardness assurance The products guaranteed in radiation within the JANS system fully comply with the MILPRF-19500/255 specification. The products guaranteed in radiation within the ESCC system fully comply with the ESCC 5201/002 and ESCC 22900 specifications. JANS radiation assurance ST JANS parts guaranteed at 100 krad (Si), tested, in full compliancy with the MIL-PRF19500 specification, specifically the Group D, subgroup 2 inspection, between 50 and 300 rad/s. A brief summary is provided below: All test are performed in accordance to MIL-PRF-19500 and test method 1019 of MILSTD-750 for total Ionizing dose. Each wafer of each lot is tested. The table below provides for each monitored parameters of the test conditions and the acceptance criteria Table 6. MIL-PRF-19500 (test method 1019) post radiation electrical characteristics Value Symbol Parameter Test conditions Unit Min. ICBO Collector to base cutoff current IEBO Emitter to base cutoff current VCB = 75 20 A VCB = 60 V 20 nA VEB = 6 V 20 A VEB = 4 V 20 nA V(BR)CEO Breakdown voltage, collector to emitter IC = 10 mA ICES Collector to emitter cutoff current VCE = 50 V hFE Forward-current transfer ratio Max. 50 V 100 VCE = 10 V; IC = 0.1 mA [25](1) VCE = 10 V; IC = 1.0 mA [37.5](1) VCE = 10 V; IC = 10 mA [50](1) VCE = 10 V; IC = 150 mA [50](1) VCE = 10 V; IC = 500 mA [15](1) 325 300 Collector-emitter saturation voltage IC = 150 mA; IB = 15 mA 0.35 VCE(sat) IC = 500 mA; IB = 50 mA 1.15 VBE(sat) Base-emitter saturation voltage IC = 150 mA; IB = 15 mA IC = 500 mA; IB = 50 mA nA V 0.6 1.38 V 2.3 1. See method 1019 of MIL-STD-750 for how to determine [hFE] by first calculating the delta (1/hFE) from the pre- and Post-radiation hFE. Notice the [hFE] is not the same as hFE and cannot be measured directly. The [hFE] value can never exceed the pre-radiation minimum hFE that it is based upon. Doc ID 16558 Rev 10 9/19 Radiation hardness assurance 2N2222AHR ESCC radiation assurance Each product lot is tested according to the ESCC basic specification 22900, with a minimum of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as unirradiated sample, all of them being fully compliant with the applicable ESCC generic and/or detailed specification. ST goes beyond the ESCC specification by performing the following procedure: Test of 11 pieces by wafer, 5 biased at at least 80% of V(BR)CEO, 5 unbiased and 1 kept for reference Irradiation at 0.1 rad (Si)/s Acceptance criteria of each individual wafer if as 100 krad guaranteed if all 10 samples comply with the post radiation electrical characteristics provided in table 7 Delivery together with the parts of the radiation verification test (RVT) report of the particular wafer used to manufacture the products. This RVT includes the value of each parameter at 30, 50, 70 and 100 krad (Si) and after 24 hour annealing at room temperature and after an additional 168 hour annealing at 100C. Table 7. Symbol ESCC 5201/002 post radiation electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICBO Collector cut-off current (IE = 0) VCB = 60 V - 10 nA IEBO Emitter cut-off current (IC = 0) VEB = 3 V - 10 nA Collector-base breakdown voltage (IE = 0) IC = 100 A 75 - V Collector-emitter V(BR)CEO(1) breakdown voltage (IB = 0) IC = 30 mA IC = 10 mA 40 50 - V V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = 100 A 6 - V VCE(sat) (1) Collector-emitter saturation voltage IC = 150 mA IB = 15 mA VBE(sat) (1) Base-emitter saturation voltage IC = 150 mA IB = 15 mA Post irradiation gain calculation (2) IC = 0.1 mA IC = 10 mA IC = 150 mA IC = 500 mA VCE = 10 V VCE = 10 V VCE = 10 V VCE = 10 V V(BR)CBO [hFE] (1) - [17.5] [37.5] [50] [20] - 0.3 V 1.2 V 300 1. Pulsed duration = 300 s, duty cycle 2 % 2. The post-irradiation gain calculation of [hFE], made using hFE measurements from prior to and on completion of irradiation testing and after each annealing step if any, shall be as specified in MILSTD-750 method 1019. 10/19 Doc ID 16558 Rev 10 2N2222AHR 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 8. Product mass summary Package Mass (g) LCC-3UB 0.06 LCC-3 0.06 TO-18 0.40 Doc ID 16558 Rev 10 11/19 Package mechanical data Table 9. 2N2222AHR LCC-3UB mechanical data mm. Dim. Min. Figure 8. 12/19 Typ. Max. A 1.16 1.42 C 0.46 0.51 0.56 D 0.56 0.76 0.96 E 0.92 1.02 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.18 I 2.41 2.54 2.67 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.41 0.51 0.61 M 2.46 2.54 2.62 N 1.81 1.91 2.01 r 0.20 r1 0.30 r2 0.56 LCC-3UB drawings Doc ID 16558 Rev 10 2N2222AHR Package mechanical data Table 10. LCC-3 mechanical data mm. Dim. Min. Typ. A 1.16 1.42 C 0.45 0.50 0.56 D 0.60 0.76 0.91 E 0.91 1.01 1.12 F 1.95 2.03 2.11 G 2.92 3.05 3.17 I 2.41 2.54 2.66 J 0.42 0.57 0.72 K 1.37 1.52 1.67 L 0.40 0.50 0.60 M 2.46 2.54 2.62 N 1.80 1.90 2.00 R Figure 9. Max. 0.30 LCC-3 drawings 1 2 3 Doc ID 16558 Rev 10 13/19 Package mechanical data Table 11. 2N2222AHR TO-18 mechanical data mm. Dim. Min. A Max. 12.7 B 0.49 D 5.3 E 4.9 F 5.8 G 2.54 H 1.2 I 1.16 L 45 Figure 10. TO-18 drawings 14/19 Typ. Doc ID 16558 Rev 10 Order codes Table 12. Ordering information Part number 2N2222AUB1 Agency specification EPPL Quality level Radiatio n level - - Engineering model ESCC - - Engineering model JANS - Engineering model ESCC - J2N2222AUB1 SOC2222A 2N2222AHR 5 - Package Lead finish Marking(1) Packing LCC-3UB Gold U20 Waffle pack LCC-3UB Gold J2N2222A Waffle pack N20 Waffle pack LCC-3 Gold Doc ID 16558 Rev 10 MIL-PRF-19500/255 - JANS flight - LCC-3UB Gold JS2222 Waffle pack JANS2N2222AUBT MIL-PRF-19500/255 - JANS flight - LCC-3UB Solder dip JS2222 Waffle pack JANSR2N2222AUBG MIL-PRF-19500/255 - JANS flight 100 krad LCC-3UB Gold JSR2222 Waffle pack JANSR2N2222AUBT MIL-PRF-19500/255 - JANS flight 100 krad LCC-3UB Solder dip JSR2222 Waffle pack 2N2222ARUBG 5201/002/11R Target ESCC flight 100 krad LCC-3UB Gold 520100211R Waffle pack 5201/002/12R Target ESCC flight 100 krad LCC-3UB Solder dip 520100212R Waffle pack 5201/002/11 Yes ESCC flight 100 krad LCC-3UB Gold 520100211 Waffle pack 5201/002/12 Yes ESCC flight 100 krad LCC-3UB Solder dip 520100212 Waffle pack SOC2222AUB11 5201/002/11 - ESCC flight - LCC-3UB Gold 520100211 Waffle pack SOC2222AUB12 5201/002/12 - ESCC flight - LCC-3UB Solder dip 520100212 Waffle pack SOC2222ARHRG 5201/002/04R Target ESCC flight 100 krad LCC-3 Gold 520100204R Waffle pack SOC2222ARHRT 5201/002/05R Target ESCC flight 100 krad LCC-3 Solder dip 520100205R Waffle pack SOC2222ASW (2) 5201/002/04 or 05 (3) Yes ESCC flight 100 krad LCC-3 Gold or solder dip (1) 520100204 or 05(3) Waffle pack SOC2222AHRB 5201/002/04 or 05 (3) Yes ESCC flight - LCC-3 Gold or solder dip (1) 520100204 or 05(3) Waffle pack 2N2222AHR 5201/002/01 or 02 (3) - ESCC flight - TO-18 Gold or solder dip (1) 520100201 or 02(3) Strip pack 2N2222ARUBT SOC2222AUB11SW (2) SOC2222AUB12SW (2) 15/19 Order codes JANS2N2222AUBG Shipping details 2N2222AHR 1. Specific marking only. The full marking includes in addition: For the engineering models : ST logo, date code, country of origin (FR). For ESCC flight parts : ST logo, date code, country of origin (FR), ESA logo, serial number of the part within the assembly lot. For JANS flight parts : ST logo, date code, country of origin (FR), manufacturer code (CSTM), serial number of the part within the assembly lot. 2. Not recommended for new design 3. Depending ESCC part number mentioned on the purchase order Contact ST sales office for information about the specific conditions for: - Products in die form - Other JANS quality levels - Tape and reel packing 6 Shipping details 6.1 Data code Data code is structured as described below: - EM (ESCC and JANS) xyywwz - ESCC Flight yywwz - JANS Flight xyywwz where: x yy 3: EM W: flight part/ diffused in Singapore Last two digits year Week digits Lot index in the week 16/19 Doc ID 16558 Rev 10 ww z 2N2222AHR 6.2 Shipping details Documentation Table 13. Documentation provided for each type of product Quality level Radiation level Engineering model - - JANS Flight - Certificate of conformance JANSR Flight 100 krad - ESCC Flight Documentation Certificate of conformance 50 rad/s radiation verification test report Certificate of conformance Certificate of conformance 100 krad 0.1 rad/s radiation verification test report Doc ID 16558 Rev 10 17/19 Revision history 7 2N2222AHR Revision history Table 14. Document revision history Date Revision 04-Jan-2010 1 Initial release 16-Apr-2010 2 Added Table 1 on page 1 09-Jul-2010 3 Modified: Table 1 on page 1 and Table 11 on page 14 30-Nov-2011 4 12-Dec-2011 5 Changes - - - - - Modified: Table 5 on page 5 Added: Section 2.3: Electrical characteristics (curves) Modified: Table 1 and 2 Added: Table 2, 11, 12 Minor text changes in the document title and description on the cover page. Minor text changes to improve readability Updated: - - - - 17-Apr-2012 6 Title and description in cover page. PTOT in Table 2: Absolute maximum ratings. The entire Section 2: Electrical characteristics. Table 12: Ordering information. Added: - Table 3: Thermal data, Section 3: Radiation hardness assurance and Table 12: Ordering information. - Figure 5: JANS saturated turn-on switching time test circuit and Figure 6: JANS saturated turn-off switching time test circuit. - Section 6: Shipping details. Updated titles in Figure 5: JANS saturated turn-on switching time 19-Apr-2012 7 test circuit and Figure 6: JANS saturated turn-off switching time test circuit. 24-Apr-2012 8 Updated RthJA value in Table 3: Thermal data. 14-May-2012 9 Updated Table 12: Ordering information. 21-Feb-2013 10 Table 1: Devices summary and Table 12: Ordering information have been updated. Updated text in Section 3: Radiation hardness assurance. 18/19 Doc ID 16558 Rev 10 2N2222AHR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 16558 Rev 10 19/19