This is information on a product in full production.
February 2013 Doc ID 16558 Rev 10 1/19
19
2N2222AHR
Hi-Rel 40 V, 0.8 A NPN transistor
Datasheet — production data
Features
•Hermetic packages
•ESCC and JANS qua lified
•Up to 100 krad(Si) low dose ratee
Description
The 2N2222AHR is a silicon planar NPN
transistor specifically designed and housed in
hermetic packages for aerospace and Hi-Rel
applications. It is available in the JAN qualification
system (MIL-PRF19500 compliance) and in the
ESCC qualification system (ESCC 5000
compliance). In case of discrepancies between
this datasheet and the relevant agency
specification, the latter takes precedence.
Figure 1. Internal schematic diagramI
Parameter ESCC JANS
BV
CEO min
40 V 50 V
I
C
(max) 0.8 A
h
FE
at 10 V - 150 mA 100
TO-18
LCC-3
3
1
2
LCC-3UB
3
1
2
3
1
2
4
Pin 4 in LCC-3UB is connected to the metallic lid.
Table 1. Devices summary
Device Qualification Agency spec. Package Radiation level EPPL
JANS2N2222AUBx JANS MIL-PRF-19500/255 LCC-3UB --
JANSR2N2222AUBx 100 krad -
2N2222AUBxx
ESCC 5201/002
LCC-3UB
-Yes
2N2222AUBxxSW 100 krad Yes
2N2222ARUBx 100 krad Target
SOC2222AHRB
LCC-3
-Yes
SOC2222AxxSW 100 krad Yes
SOC2222ARHRx 100 krad Target
2N2222AHR
TO-18
--
2N2222ASW 100 krad -
2N2222ARHRx 100 krad -
www.st.com
Content 2N2222AHR
2/19 Doc ID 16558 Rev 10
Content
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 JANS electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 ESCC electrical characte ristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.1 Dat a code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2N2222AHR Electrical ratings
Doc ID 16558 Rev 10 3/19
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
V
CBO
Collector-base voltage (I
E
= 0) 75 V
V
CEO
Collector-emitter voltage (I
B
= 0) for JANS devices 50 V
Collector-emitter voltage (I
B
= 0) for ESCC devices 40 V
V
EBO
Emitter-base voltage (I
C
= 0) 6 V
I
C
Collector current 0.8 A
P
TOT
Total dissipation at T
amb
≤ 25 °C
ESCC: TO-18
LCC-3 and LCC-3UB
LCC-3 and LCC-3UB
(1)
JANS: LCC-3UB
Total dissipation at T
case
≤ 25 °C
ESCC: TO-18
1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.
0.5
0.5
0.73
0.5
1.8
W
Total dissipation at T
sp(IS)
= 25 °C
JANS: LCC-3UB 1 W
T
STG
Storage temperature -65 to 200 °C
T
J
Max. operating junction temperature 200 °C
Table 3. Thermal data
Symbol Parameter LCC-3
LCC-3UB TO-18 Unit
R
thJC
Thermal resistance junction-case (max) for JANS - -
°C/W
Thermal resistance junction-case (max) for ESCC - 97
Rt
hJSP(IS)
Thermal resistance junction-solder pad (infinite
sink) (max) for JANS 90 -
Thermal resistance junction-solder pad (infinite
sink) (max) for ESCC --
R
thJA
Thermal resistance junction-ambient (max) for
JANS 325 -
Thermal resistance junction-ambient (max) for
ESCC 350
240
(1)
1. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.
350
Ele ctrical characteristics 2N2222AHR
4/19 Doc ID 16558 Rev 10
2 Electrical characteristics
JANS and ESCC version of the products are assembled and tested in compliance with the
agency specification it is qualified in. The electrical characteristics of each version are
provided in dedicated tables.
T
case
= 25 °C unless otherwise specified.
2.1 JANS electrical characteristics
Table 4. JANS e lectrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
I
CBO
Collector cut-off
current (I
E
= 0)
V
CB
= 75 V
V
CB
= 60 V
V
CB
= 60 V T
amb
= 150 °C -10
10
10
µA
nA
µA
I
CES
Collector cut-off
current
(I
E
= 0) V
CE
= 50 V - 50 nA
I
EBO
Emitter cut-off current
(I
C
= 0) V
EB
= 6 V
V
EB
= 4 V -10
10 µA
nA
V
(BR)CEO (1)
Collector-emitter
breakd own vo ltage
(I
B
= 0) I
C
= 10 mA 50 - V
V
CE(sat) (1)
Collector-emitter
saturation voltage I
C
= 150 mA I
B
= 15 mA
I
C
= 500 mA I
B
= 50 mA -0.3
1V
V
V
BE(sat) (1)
Base-emitter
saturation voltage
I
C
= 150 mA I
B
= 15 mA
I
C
= 500 mA I
B
= 50 mA 0.6 1.2
2V
V
h
FE (1)
DC current gain
I
C
= 0.1 mA V
CE
= 10 V
I
C
= 1 mA V
CE
= 10 V
I
C
= 10 mA V
CE
= 10 V
I
C
= 150 mA V
CE
= 10 V
I
C
= 500 mA V
CE
= 10 V
I
C
= 10 mA V
CE
= 10 V
T
amb
= -55 °C
50
75
100
100
30
35
-
325
300
h
fe
Small signal current
gain
V
CE
= 20 V I
C
= 20 mA
f = 100 MHz
V
CE
= 10 V I
C
=1 mA
f = 1 kHz
2.5
50 -
C
obo
Out put capacitance
(I
E
= 0) V
CB
= 10 V
100 kHz ≤ f ≤ 1 MHz -8pF
C
ibo
Out put capacitance
(I
E
= 0) V
EB
= 0.5 V
100 kHz ≤ f ≤ 1 MHz -25pF
2N2222A HR Electri cal chara ct er istics
Doc ID 16558 Rev 10 5/19
2.2 ESCC electrical characteristics
t
on
Turn-on time V
CC
= 30 V I
C
= 150 mA
I
B1
= 15 mA -35ns
t
off
Turn-off time V
CC
= 30 V I
C
= 150 mA
I
B1
= -I
B2
= 15 mA - 300 ns
1. Pulsed duration = 300 µs, duty cycle ≤ 2 %
Table 4. JANS electrical characteristics (continued)
Symbol Parameter Test conditions Min. Typ. Max. Unit
Table 5. ESCC electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
I
CBO
Collector cut-off
current (I
E
= 0) V
CB
= 60 V
V
CB
= 60 V T
amb
= 150 °C -10
10 nA
µA
I
EBO
Emitter cut-off current
(I
C
= 0) V
EB
= 3 V - 10 nA
V
(BR)CBO
Collector-base
breakd own vo ltage
(I
E
= 0) I
C
= 100 µA 75 - V
V
(BR)CEO (1)
Collector-emitter
breakd own vo ltage
(I
B
= 0) I
C
= 30 mA 40 - V
V
(BR)EBO
Emitter-base
breakd own vo ltage
(I
C
= 0) I
E
= 100 µA 6 - V
V
CE(sat) (1)
Collector-emitter
saturation voltage I
C
= 150 mA I
B
= 15 mA - 0.3 V
V
BE(sat) (1)
Base-emitter
saturation voltage I
C
= 150 mA I
B
= 15 mA 0.87 1.2 V
h
FE (1)
DC current gain
I
C
= 0.1 mA V
CE
= 10 V
I
C
= 10 mA V
CE
= 10 V
I
C
= 150 mA V
CE
= 10 V
I
C
= 500 mA V
CE
= 10 V
I
C
= 10 mA V
CE
= 10 V
T
amb
= -55 °C
35
75
100
40
35
-300
h
fe
Small signal current
gain V
CE
= 20 V I
C
= 20 mA
f = 100 MHz 3-10
C
obo
Out put capacitance
(I
E
= 0) V
CB
= 10 V
100 kHz ≤ f ≤ 1 MHz -8pF
Ele ctrical characteristics 2N2222AHR
6/19 Doc ID 16558 Rev 10
2.3 Electrical characteristics (curves)
t
on
Turn-on time V
CC
= 30 V I
C
= 150 mA
I
B1
= 15 mA -35ns
t
off
Turn-off time V
CC
= 30 V I
C
= 150 mA
I
B1
= -I
B2
= 15 mA - 285 ns
1. Pulsed duration = 300 µs, duty cycle ≤ 2 %
Table 5. ESCC electrical characteristics (continued)
Symbol Parameter Test conditions Min. Typ. Max. Unit
Figure 2. DC current gain Figure 3. Collector emitter saturation
voltage
Figure 4. Base emitter saturation
voltage
$0Y
,F$
   


(
&
&
&
9&( 9
$0Y
&
,F$










&
&
K)( 
$0Y
,F$









&
&
&
K)( 
2N2222A HR Electri cal chara ct er istics
Doc ID 16558 Rev 10 7/19
2.4 Test circuits
Figure 5. JANS saturated turn-on switching time test circuit
Figure 6. JANS saturated turn-of f switching time test circuit
Ele ctrical characteristics 2N2222AHR
8/19 Doc ID 16558 Rev 10
Figure 7. ESCC resistive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
2N2222AHR Radiation hardness assurance
Doc ID 16558 Rev 10 9/19
3 Radiation hardness assurance
The products guaranteed in radiation within the JANS system fully comply with the MIL-
PRF-19500/255 specification.
The products guaranteed in radiation within the ESCC system fully comply with the ESCC
5201/002 and ESCC 22900 specifications.
JANS radiation assurance
ST JANS parts guaranteed at 100 krad (Si), tested, in full compliancy with the MIL-PRF-
19500 specification, specifically the Group D, subgroup 2 inspection, between 50 and 300
rad/s. A brief summary is provided below:
●
All test are performed in accordance to MIL-PRF-19500 and test method 1019 of MIL-
STD-750 for total Ionizing dose.
●
Each wafer of each lot is tested. The table below provides for each monitored
parameters of the test conditions and the acceptance criteria
Table 6. MIL-PRF-19500 (test method 1019) post radiation electrical
characteristics
Symbol Parameter Test conditions Value Unit
Min. Max.
I
CBO
Collector to base
cutoff curr ent V
CB
= 75 20 µA
V
CB
= 60 V 20 nA
I
EBO
Emitter to base
cutoff current
V
EB
= 6 V 20 µA
V
EB
= 4 V 20 nA
V
(BR)CEO
Breakdow n vo ltage,
collector to emitter I
C
= 10 mA 50 V
I
CES
Collector to emitter
cutoff curr ent V
CE
= 50 V 100 nA
h
FE
Forward-current
transfer ratio
V
CE
= 10 V; I
C
= 0.1 mA [25]
(1)
1. See method 1019 of MIL-STD-750 for how to determine [h
FE
] by first calculating the delta (1/h
FE
) from the
pre- and Post-radiation h
FE
. Notice the [h
FE
] is not the same as h
FE
and cannot be measured directly. The
[h
FE
] value can never exceed the pre-radiation minimum h
FE
that it is based upon.
V
CE
= 10 V; I
C
= 1.0 mA [37.5]
(1)
325
V
CE
= 10 V; I
C
= 10 mA [50]
(1)
V
CE
= 10 V; I
C
= 150 mA [50]
(1)
300
V
CE
= 10 V; I
C
= 500 mA [15]
(1)
V
CE(sat)
Collector-emitter
saturation voltage I
C
= 150 mA; I
B
= 15 mA 0.35 V
I
C
= 500 mA; I
B
= 50 mA 1.15
V
BE(sat)
Base-emitter
saturation voltage I
C
= 150 mA; I
B
= 15 mA 0.6 1.38 V
I
C
= 500 mA; I
B
= 50 mA 2.3
Radiation hardness assurance 2N2222AHR
10/19 Doc ID 16558 Rev 10
ESCC radiation assurance
Each product lot is tested according to the ESCC basic specification 22900, with a minimum
of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as
unirradiated sample, all of them being fully compliant with the applicable ESCC generic
and/o r detailed speci fic ati on.
ST goes beyond the ESCC specification by performing the following procedure:
●
Test of 11 pieces by wafer , 5 biased at at least 80% of V
(BR)CEO
, 5 unbiased and 1 kept
for reference
●
Irradiation at 0.1 rad (Si)/s
●
Acceptance criteria of each individual wafer if as 100 krad guaranteed if all 10 samples
comply with the post radiation electrical characteristics provided in table 7
●
Delivery together with the parts of the radiation verification test (RVT) report of the
particular wafer used to manufacture the products. This RVT includes the value of each
parameter at 30, 50, 70 and 100 krad (Si) and after 24 hour annealing at room
temperature and after an additional 168 hour annealing at 100°C.
Table 7. ESCC 5201/002 post radiation electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
I
CBO
Collector cut-off
current (I
E
= 0) V
CB
= 60 V - 10 nA
I
EBO
Emitter cut-off current
(I
C
= 0) V
EB
= 3 V - 10 nA
V
(BR)CBO
Collector-base
breakd own vo ltage
(I
E
= 0) I
C
= 100 µA 75 - V
V
(BR)CEO(1)
1. Pulsed duration = 300 µs, duty cycle ≤ 2 %
Collector-emitter
breakd own vo ltage
(I
B
= 0)
I
C
= 30 mA
I
C
= 10 mA 40
50 -V
V
V
(BR)EBO
Emitter-base
breakd own vo ltage
(I
C
= 0) I
E
= 100 µA 6 - V
V
CE(sat) (1)
Collector-emitter
saturation voltage I
C
= 150 mA I
B
= 15 mA - 0.3 V
V
BE(sat) (1)
Base-emitter
saturation voltage I
C
= 150 mA I
B
= 15 mA 1.2 V
[h
FE
]
(1)
Post irradiation gain
calculation
(2)
2. The post-irradiation gain calculation of [h
FE
], made using h
FE
measurements from prior to and on
completion of irradiation testing and after each annealing step if any, shall be as specified in MILSTD-750
method 1019.
I
C
= 0.1 mA V
CE
= 10 V
I
C
= 10 mA V
CE
= 10 V
I
C
= 150 mA V
CE
= 10 V
I
C
= 500 mA V
CE
= 10 V
[17.5]
[37.5]
[50]
[20]
-300
2N2222AHR Package mechanical data
Doc ID 16558 Rev 10 11/19
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Table 8. Product mass summary
Package Mass (g)
LCC-3UB 0.06
LCC-3 0.06
TO-18 0.40
Package mechanical data 2N2222AHR
12/19 Doc ID 16558 Rev 10
Figure 8. LCC-3UB drawings
Table 9. LCC-3UB mechanical data
Dim. mm.
Min. Typ. Max.
A 1.16 1.42
C 0.46 0.51 0.56
D 0.56 0.76 0.96
E 0.92 1.02 1.12
F 1.95 2.03 2.11
G 2.92 3.05 3.18
I 2.41 2.54 2.67
J 0.42 0.57 0.72
K 1.37 1.52 1.67
L 0.41 0.51 0.61
M 2.46 2.54 2.62
N 1.81 1.91 2.01
r 0.20
r1 0.30
r2 0.56
2N2222AHR Package mechanical data
Doc ID 16558 Rev 10 13/19
Figure 9. LCC-3 drawings
Table 10. LCC-3 mechanical data
Dim. mm.
Min. Typ. Max.
A 1.16 1.42
C 0.45 0.50 0.56
D 0.60 0.76 0.91
E 0.91 1.01 1.12
F 1.95 2.03 2.11
G 2.92 3.05 3.17
I 2.41 2.54 2.66
J 0.42 0.57 0.72
K 1.37 1.52 1.67
L 0.40 0.50 0.60
M 2.46 2.54 2.62
N 1.80 1.90 2.00
R 0.30
21
3
Package mechanical data 2N2222AHR
14/19 Doc ID 16558 Rev 10
Figure 10. TO-18 drawings
Table 11. TO-18 mechanical data
Dim. mm.
Min. Typ. Max.
A 12.7
B 0.49
D 5.3
E 4.9
F 5.8
G 2.54
H1.2
I1.16
L 45°
2N2222AHR Order codes
Doc ID 16558 Rev 10 15/19
5 Order codes
Table 12. Ordering information
Part number Agency specification EPPL Quality level Radiatio
n level Package Lead finish Marking
(1)
Packing
2N2222AUB1 - - Engineering
model ESCC - LCC- 3UB Gold U20 Waf fle pack
J2N2222AUB1 - Engineering
model JANS LCC- 3UB Gold J2N22 22A Waf fle pack
SOC2222A - - Engineering
model ESCC - LC C- 3 Gold N20 Waf fle pack
JANS2N2222AUBG MIL-PRF-19500/255 - JANS flight - LCC-3UB Gold JS2222 Waffle pack
JANS2N2222AUBT MIL-PRF-19500/255 - JANS flight - LCC-3UB Solder dip JS2222 Waffle pack
JANSR2N2222AUBG MIL-PRF-19500/255 - JANS flight 100 krad LCC-3UB Gold JSR2222 Waffle pack
JANSR2N2222AUBT MIL-PRF-19500/255 - JANS flight 100 krad LCC-3UB Solder dip JSR2222 Waffle pack
2N2222ARUBG 5201/002/11R Target ESCC flight 100 krad LCC-3UB Gold 5 20100211R Waffle pack
2N2222ARUBT 5201/002/12R Target ESCC flight 100 krad LCC-3UB Solder dip 520100212R Waffle pack
SOC2222AUB11SW
(2)
5201/002/11 Yes ESCC flight 100 krad LCC-3UB Gold 520100211 Waffle pack
SOC2222AUB12SW
(2)
5201/002/12 Yes ESCC flight 100 krad LCC-3UB Solder dip 520100212 Waffle pack
SOC2222AUB11 5201/002/11 - ESCC flight - LCC-3UB Gold 520100211 Waffle pack
SOC2222AUB12 5201/002/12 - ESCC flight - LCC-3UB Solder dip 520100212 Waffle pack
SOC2222ARHRG 5201/002/04R Target ESCC flight 100 krad LCC-3 Gold 520100204R Waffle pack
SOC2222ARHRT 5201/002/05R Target ESCC flight 100 krad LCC-3 Solder dip 520100205R Waffle pack
SOC2222ASW
(2)
5201/002/04 or 05
(3)
Yes ESCC flight 100 krad LCC-3 Gold or solder dip
(1)
5201002 04 or
05
(3)
Waffle pack
SOC2222AHRB 5201/002/04 or 05
(3)
Yes ESCC flight - LCC-3 Gold or solder dip
(1)
5201002 04 or
05
(3)
Waffle pack
2N2222AHR 5201/002/01 or 02
(3)
- ESCC flight - TO-18 Gold or solder dip
(1)
5201002 01 or
02
(3)
Strip pack
Shipping details 2N2222AHR
16/19 Doc ID 16558 Rev 10
Contact ST sales office for information about the specific conditions for:
– Products in die form
– Other JANS quality levels
– Tape and reel packing
6 Shipping details
6.1 Data code
Data code is structured as described below:
– EM (ESCC and JANS) xyywwz
– ESCC Flight yywwz
– JANS Fli ght xyyw w z
where:
1. Specific marking only. The full marking includes in addition:
For the engineering models : ST logo, date code, country of origin (FR).
For ESCC flight parts : ST logo, date code, country of origin (FR), ESA logo, serial number of the part within the assembly lot.
For JANS flight parts : ST logo, date code, country of origin (FR), manufacturer code (CSTM), serial number of the part within
the assembly lot.
2. Not recommended for new design
3. Depending ESCC part number mentioned on the purchase order
xyywwz
3: EM
W: fligh t pa rt/ dif fus ed
in
Singapore
Last two digits year
Week digits
Lot index in the week
2N2222AHR Shipping details
Doc ID 16558 Rev 10 17/19
6.2 Documentation
Table 13. Documentation provided for each type of product
Quality level Radiation level Documentation
Engineering model - -
JANS Flight - Certificate of conformance
JANSR Fli ght 100 krad Certificate of conformance
50 rad/s radiation verification test report
ESCC Flight
- Certificate of conformance
100 krad Certificate of conformance
0.1 rad/s radiation verification test report
Revision history 2N2222AHR
18/19 Doc ID 16558 Rev 10
7 Revision history
Table 14. Document revision history
Date Revision Changes
04-Jan-2010 1 Initial release
16-Apr-2010 2 Added Table 1 on page 1
09-Jul-2010 3 Modified: Table 1 on page 1 and Table 11 on page 14
30-Nov-2011 4
– Modified: Table 5 on page 5
– Added: Section 2.3: Electrical characteristics (curves)
– Modified: Table 1 and 2
– Added: Table 2, 11, 12
– Minor text changes in the document title and description on the
cover page.
12-Dec-2011 5 Minor text changes to improve readability
17-Apr-2012 6
Updated:
– Title and description in cover page.
–P
TOT
in Table 2: Absolute maximum ratin gs.
– The entire Section 2: Electrical characteristics.
–Table 12: Ordering information.
Added:
–Table 3: Thermal data, Section 3: Radiation hardness assurance
and Table 12: Ordering information.
–Figure 5: JANS saturated turn-on switching time test circuit and
Figure 6: JANS saturated turn-off switching time test circuit.
–Section 6: Shipping details.
19-Apr-2012 7
Updated titles in
Figure 5: JANS sa turat ed turn-on switchi ng tim e
test circuit and Figure 6: JANS saturated turn-off switching time test
circuit.
24-Apr-2012 8
Updated R
thJA
value in
Table 3: Thermal dat a .
14-May-2012 9
Updated
Table 12: Ordering information.
21-Feb-2013 10 Table 1: Devices summary and Table 12: Ordering information have
been updated.
Updated text in
Section 3: Radiation hardness assurance.
2N2222AHR
Doc ID 16558 Rev 10 19/19
Please Read Carefully:
Informa tion in this do cument is prov ided solely in connec tion with ST products. STMic roelect ronics NV and its subsidiari es (“ST”) reser ve the
right to mak e chang es, c or recti ons , modif ic ations or improv ement s, t o th is documen t, and the prod ucts an d servic es des crib ed he rein a t any
time, without notice.
All ST produ cts are sold purs uant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes n o
liability whatsoever relating to the choice, selection or use of the ST products an d services descr i bed herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST produ cts with provis ions different f rom the statement s and/or technic al features set forth in this document shall i mmediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liabili ty of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previo usly supplied.
The ST logo is a registered t r ademark of STMicroelectronics. All other names are the pro perty of their respecti ve owners.
© 2013 STMicroelec tronics - All right s re se rved
STMicroelectronic s group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com