OSC -앮-앮-앮-앮-앮-앮
Transmission Band C-P11,2
51 1500.0 - 1520.0 nm
14 1460.0 - 1490.0 nm
14/15 1470.0 - 1514.0 nm
15 1530.0 - 1563.0 nm
16 1610.0 - 1625.0 nm
15/16 1570.0 - 1603.0 nm
Lower Reflection Band C - P21,2
51 1500.0 - 1520.0 nm
14/15 1470.0 - 1514.0 nm
15 1530.0 - 1563.0 nm
16 1610.0 - 1625.0 nm
15/16 1570.0 - 1603.0 nm
Upper Reflection Band C - P21,2
51 1500.0 - 1520.0 nm
14 1460.0 - 1490.0 nm
15 1530.0 - 1563.0 nm
16 1610.0 - 1625.0 nm
15/16 1570.0 - 1603.0 nm
Connector Type
FC FC/SPC
FC/APC FC/APC
FC/UPC FC/UPC
SC SC/SPC
SC/APC SC/APC
SC/UPC SC/UPC
ST ST/SPC
ST/UPC ST/UPC
LC LC/SPC
LC/UPC LC/UPC
MU/UPC MU/UPC
N None
Fiber Jacket
2 250 micron, 200 kpsi bar e fiber
9 900 micron, tight buffer
Pigtail Length
1 1 meter
X Specify X meters
1. All wavelengths referenced to vacuum.
2. Other transmission and reflection bands available upon request.
Erbium Amplifier
Components
33
Optical Service Channel WDMErbium Amplifier Components
32
Erbium Amplifier
Components
DiCon's Optical Service Channel WDM multiplexes 1310 nm,
1480 nm, 1510 nm, or 1625 nm telemetry signals in dense
WDM networks. The component uses a thin film filter mounted
between a pair of GRIN lens collimators. The Optical Service
Channel Filter WDM is housed in a compact, environmentally
stable package that offers superior resistance to humidity and
temperature and is suitable for mounting within a fiber gain
module.
Features
• Wide selection of telemetry wavelengths
• Low insertion loss
• High isolation
• Rugged, environmentally stable package
• Tested to Telcordia GR-1209 and GR-1221
Applications
Optical Service Channel WDMs are used to add or drop telemetry
signals within fiber amplifiers and ter minal equipment.
Optical Service Channel WDM
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510)528-0427 Fax. (510)525-5776 www.diconfiber.com
U.S. patented. Specifications subject to change. Copyright ©2001 DiCon Fiberoptics, Inc. All rights reserved.
Ordering Information
Housing Dimensions1
Units: mm
1. Optional 38 or 40 mm housing lengths by request.
Specifications1
Insertion loss C - P1
Insertion loss C - P2
Isolation C - P1
Isolation C - P2
Ripple C - P1
Ripple C - P2
Directivity
Back-reflection
PDL
Fiber type
Operating temperature
Storage temperature
0.6 dB typ., 0.8 dB max.
0.5 dB typ., 0.6 dB max.
30 dB min.
15 dB typ., 12 dB min.
0.3 dB max.
0.1 dB max.
55 dB min.
-50 dB max.
0.05 dB typ., 0.1 dB max.
9/125 Corning SMF-28
0°C to +65°C
-40°C to +85°C
1. All specifications referenced without connectors.
