Emboss Tape XH CONNECTOR Radial Tape 2.5mm pitch/Disconnectable Crimp style connectors 1 Specifications ------------------- 5 JS * Current rating: 3A AC, DC (AWG #22) * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,000V AC/minute * Applicable wire: AWG #30 to #22 * Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. T The XH connector was developed based on the high reliability and versatility of our NH series connectors. The connector is very small with a mounting height of 9.8mm. Standards ---------------------- * Original folded beam contact * Box-shaped shrouded header * Header with a boss * Interchangeability * Conforming to the HA terminal 0 Recognized E60389 1 Certified LR20812 2 J50014297 PC board layout and Assembly layout Side entry type 2.5 0.052.5min 7.0 9.8 9.2min 3.4min 0.05 0.9 0.1 0 14.3 11.5 6.1 Through-hole type (viewed from soldening side) Top entry type 5.75 2.5 2.5min 2 circuits :1.0 0.05 3 to 20 circuits :0.9 0.1 0 1.7 0.1 0 2.5 min 2.5 0.05 (2 circuits or more) 1.10.2 0 2.0 0.05 4.35 0.05 0.9 5.75 1.60 0.05 3.4 min (1 circuit) 7.0 9.8 Top entry type with a boss 2 circuits :1.00.05 3 to 20 circuits:0.9 0.1 0 0.1 0 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. End face of wafer on the mating side 3.9 2.5 2.3 1.8 0.2 11.0 6.5 SMT type (viewed from component side) Side entry type 1.3 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 XH CONNECTOR Contact 1.6 1.8 2.35 Shape A Model No. Shape SXH-001T-P0.6N SXH-001T-P0.6 SXH-002T-P0.6 A B 6.5 Crimping machine Crimp applicator SXH-001T-P0.6N AP-K2N SXH-001T-P0.6 5,000 0.130.33 2622 1.31.9 0.080.33 2822 0.91.9 0.050.13 3026 0.91.3 8,000 RoHS compliance Note: 1. Contact JST if you require gold-plated contacts or contacts made of brass. 2. Contact JST also if you require shielded wires, thin wires or other special wires. 3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. 6.5 Contact Q'ty / reel Material and Finish 2.0 1.95 Insulation O.D (mm) Phosphor bronze, tin-plated (reflow treatment) 2.4 Shape B Applicable Wire AWG# mm2 Applicator Dies Crimp applicator with dies MKS-LSMKS-L MK/SXH-001-06N APLMK SXH001-06N *MKS-SC SC/SXH-001-06N APLSC SXH001-06N MKS-LSMKS-L MK/SXH-001-06 APLMK SXH001-06 *MKS-SC SC/SXH-001-06 APLSC SXH001-06 Applicator Dies Crimp applicator with dies MKS-LSMKS-L MK/SXH-002-06 APLMK SXH002-06 *MKS-SC SC/SXH-002-06 APLSC SXH002-06 Crimping machine Crimp applicator Contact SXH-002T-P0.6 AP-K2N Note: *Strip-crimp applicator Housing Circuits 7.75 1 2 2 3 4.1 5.7 4 5 6 Circuit No.1 mark 6 2.5 A B C 7 8 9 10 11 Plugged up 12 13 (2 circuits 10.0mm pitch) 14 7.75 15 16 20 Model No. XHP-1 XHP-2 XHP-2(10.0)-U XHP-3 XHP-4 XHP-5 XHP-6 XHP-6(5.0)-U XHP-7 XHP-8 XHP-9 XHP-10 XHP-11 XHP-12 XHP-13 XHP-14 XHP-15 XHP-16 XHP-20 4.1 5.7 A Dimensions (mm) B C 3.2 4.8 1,000 2.5 5.7 7.3 1,000 10.0 13.2 14.8 1,000 5.0 8.2 9.8 1,000 7.5 10.7 12.3 1,000 10.0 13.2 14.8 1,000 12.5 15.7 17.3 1,000 25.0 28.2 29.8 1,000 15.0 18.2 19.8 1,000 17.5 20.7 22.3 1,000 20.0 23.2 24.8 1,000 22.5 25.7 27.3 1,000 25.0 28.2 29.8 1,000 27.5 30.7 32.3 1,000 30.0 33.2 34.8 1,000 32.5 35.7 37.3 1,000 35.0 38.2 39.8 1,000 37.5 40.7 42.3 1,000 47.5 50.7 52.3 500 Q'ty / bag Material PA 6, UL94V-0, natural (white) Circuit No.1 mark RoHS compliance Note: 1. XHP-2(10.0)-U is 2 circuits 10.0mm pitch plugged up. Not UL/CSA/TUV approved. 2. XHP-6(5.0)-U is 6 circuits 5.0mm pitch plugged up. Not UL/CSA/TUV approved. A B C 7.75 (6 circuits 5.0mm pitch) 4.1 5.7 Circuit No.1 mark A B C <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. XHP-1-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green D...orange N...brown FY...vivid yellow <Plugged up type> ex. XHP-2(10.0)-U-oo(blank)...natural (white) R...red E...blue 2 XH CONNECTOR Through-hole type shrouded header The shrouded headers are interchangeable with those of the NR and NRD insulation displacement connectors, and JQ board-to-board connectors. Top entry type Circuits 0.64 2 plugged up 7.0 2 3 4 3.4 5 6 2.45 7 2.35 5.75 A B 8 9 Top entry type 10 11 (3 to 20 circuits) (2 circuits) 12 0.64 0.64 13 14 7.0 7.0 15 16 3.4 3.4 20 A B 2.45 2.35 5.75 Side entry type 2.5 0.64 7.0 11.5 A B Material and Finish 5.75 2.5 2.45 Model No. Q'ty / box Dimensions (mm) Side entry type Top entry type Side entry type A B 1,000 7.4 1,000 2.5 S2B-XH-A-1 S2B-XH-A - 14.9 1,000 10.0 - - 1,000 9.9 1,000 5.0 S3B-XH-A-1 S3B-XH-A 500 12.4 500 7.5 S4B-XH-A-1 S4B-XH-A 500 14.9 500 10.0 S5B-XH-A-1 S5B-XH-A 500 17.4 500 12.5 S6B-XH-A-1 S6B-XH-A 250 19.9 500 15.0 S7B-XH-A-1 S7B-XH-A 250 22.4 250 17.5 S8B-XH-A-1 S8B-XH-A 250 24.9 250 20.0 S9B-XH-A-1 S9B-XH-A 250 27.4 250 22.5 S10B-XH-A-1 S10B-XH-A 250 29.9 250 25.0 S11B-XH-A-1 S11B-XH-A 200 32.4 250 27.5 S12B-XH-A-1 S12B-XH-A 200 34.9 250 30.0 S13B-XH-A-1 S13B-XH-A 200 37.4 250 32.5 S14B-XH-A-1 S14B-XH-A 100 39.9 250 35.0 S15B-XH-A-1 S15B-XH-A 100 42.4 200 37.5 - S16B-XH-A - 52.4 100 47.5 - - 2.35 S( )B-XH-A-1:7.6 S( )B-XH-A:9.2 2.45 A B Top entry type B2B-XH-A B2(10.0)B-XH-A-U B3B-XH-A B4B-XH-A B5B-XH-A B6B-XH-A B7B-XH-A B8B-XH-A B9B-XH-A B10B-XH-A B11B-XH-A B12B-XH-A B13B-XH-A B14B-XH-A B15B-XH-A B16B-XH-A B20B-XH-A 6.1 Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. Note: B2(10.0)B-XH-A-U is 2 circuits 10.0mm pitch plugged up. Not UL/CSA/TU V approved. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 3.4 S3B-XH-A(-1)-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green D...orange N...brown FY...vivid yellow Through-hole type shrouded header Top entry type of glass-filled nylon Circuits Model No. 2 B2B-XH-2 B3B-XH-2 B4B-XH-2 B5B-XH-2 B6B-XH-2 B7B-XH-2 B8B-XH-2 B9B-XH-2 B10B-XH-2 B11B-XH-2 B12B-XH-2 B13B-XH-2 B14B-XH-2 B15B-XH-2 3 0.64 4 5 7.0 (2 circuits) 6 7 3.4 8 9 5.75 6.75 2.45 A B 10 11 (3 to 8 circuits) 12 13 7.0 14 3.4 15 2.5 2.45 0.64 A B 1,000 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 250 20.0 24.9 250 22.5 27.4 250 25.0 29.9 250 27.5 32.4 250 30.0 34.9 250 32.5 37.4 250 35.0 39.9 250 RoHS compliance This product displays (LF)(SN) on a label. 7.0 3 7.4 5.0 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 0.64 A B 5.75 Q'ty / bag 2.5 Material and Finish 3.4 2.5 Dimensions (mm) B Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) 5.75 6.75 (9 to 15 circuits) 2.45 A B2B-XH-2-oo(blank)...natural (ivory) C...black R...red E...blue Y...yellow M...green XH CONNECTOR Through-hole type shrouded header The shrouded headers are interchangeable with those of the NR and NRD insulation displacement connectors, and JQ board-to-board connectors. Top entry type with a boss 0.64 (1 circuit) Circuits Model No. 1 *B1B-XH-AM B2B-XH-AM B3B-XH-AM B4B-XH-AM B5B-XH-AM B6B-XH-AM B7B-XH-AM B8B-XH-AM B9B-XH-AM B10B-XH-AM B12B-XH-AM 2 7.0 3 4 2.7 3.4 5 1.5 4.35 2.35 4.9 5.75 7 8 9 0.64 (2 circuits) 6 10 7.0 12 Q'ty / box 1,000 2.5 7.4 1,000 5.0 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 250 20.0 24.9 250 22.5 27.4 250 27.5 32.4 250 Material and Finish 1.5 3.4 1.0 2.352.0 5.75 RoHS compliance This product displays (LF)(SN) on a label. Note: *Marked product is not UL/CSA/TU V approved. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 5.75 (3 to 12 circuits) 1.5 7.0 ex. 3.4 A B Dimensions (mm) B Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) 2.45 A 1.6 B 0.64 A 2.5 1.6 2.45 1.0 (2.35) B1B-XH-AM-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow L...lemon yellow M...green 2.0 SMT type shrouded header 0.64 Dimensions (mm) A B Q'ty / reel S3B-XH-SM4-TB 5.0 12.5 500 S4B-XH-SM4-TB 7.5 15.0 500 S6B-XH-SM4-TB 12.5 20.0 500 Circuits Model No. 3 4 6 Material and Finish 5.5 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 2.5 A B 7.0 3.0 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 6.0 3.75 S3B-XH-SM4-oo-TB(blank)...natural (ivory) M...green R...red E...blue L...lemon yellow 4 XH CONNECTOR Through-hole type shrouded header on radial-tape TV4 type 2-TV4 type (3 to 4 circuits) (2 circuits) B A (3 to 8 circuits) B A 7.4 2.45 2.5 6.75 2.45 2.5 6.75 0.7 0.64 Circuits 2 3 4 5 6 7 8 2.8 2.8 7.0 7.0 6.75 7.0 2.45 2.5 2-TV4 type Model No. TV4 2-TV4 B2B-XH-2-TV4 B3B-XH-2-TV4 B3B-XH-TV4 B4B-XH-2-TV4 B4B-XH-TV4 B5B-XH-2-TV4 B6B-XH-2-TV4 B7B-XH-2-TV4 B8B-XH-2-TV4 0.7 0.64 Dimensions (mm) A B Q'ty / box 1,000 5.0 9.9 1,000 7.5 12.4 500 10.0 14.9 500 12.5 17.4 500 15.0 19.9 500 17.5 22.4 500 0.7 0.64 RoHS compliance This product displays (LF)(SN) on a label. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-XH-2-TV4-oo(blank)...natural (TV4 type/white, 2-TV4 type/ivory) C...black (glass-filled) BK...black R...red E...blue Y...yellow M...green Material and Finish Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: TV4 type/ PA 66, UL94V-0, natural (white) 2-TV4 type/ Glass-filled PA 66, UL94V-0, natural (ivory) Taping specification Packaging specifications D 2 and 3 circuits :12.7 4 to 8 circuits : 25.4 6.75 TERMIN H ALS & CONN ECTORS R 20.0 W Tail tape 18.0 9.0 6.0 Distance between the end of the tape and the first connector's center line (either end) Leader tape 4.0 2 circuits: 5.1 3 to 8 circuits: 3.85 2 circuits: 2.5 3 to 8 circuits: 5.0 12.7 Note: Conforms to JIC C 0806 of "Tape packaging of components with unidirectional leads on continuous tapes". Package type Distance between folds Box size Distance between the end of the tape and the first connector's center line (either end) 2, 3 circuits Quantity 48 circuits Flat pack (zigzag folded) 24 indexing holes per fold (304.8mm) 316()x45()x330()mm 19.05mm 1,000 pcs. / box 500 pcs. / box Note: Products of different packaging specifications are also available. Contact JST for details. 5