Optical Fiber Components
ProtoDel
In-Line Fiber Optic Depolarizers
A range of Lyot type all-fiber depolarizers applicable to Raman,
ASE, SLD, ELED and Fabry-Perot sources
FEATURES:
Low residual extinction ratio
All-fiber configuration
Large operating bandwidth
Low Loss
OEM packaging available
APPLICATIONS:
Raman pump laser sources
ASE, SLD, ELED and Fabry-Perot
laser sources
C, L and S-band
Optical transmission systems
Optical fiber sensors
Randomize residual polarization
for low coherence sources
A range of Lyot type all-fiber depolarizers which can be matched to a wide range of sources. Lyot
depolarizers produce randomly polarized light and can achieve a very high level of performance.
This type of depolarizer is specifically designed for applications in which the level of residual
polarization is critical to system performance.
Each model shown in the specification table overleaf is matched to a specific source by relation
to the narrowest line width of the source, allowing the cost / performance balance to be managed
according to the desired Degree of Depolarization (DOP) for your application.
The depolarizers can be custom designed to meet a range of performance specifications and can
be tailored to the customers requirements. Please contact our technical design team to discuss
specific requirements.
Optical Fiber Components
ProtoDel
ProtoDel Inc
100N. Central Expressway, Suite 600, Richardson, TX 75080, USA
Tel: +1 972 669 9743
Email: sales@protodel.com Web: www.protodel.com
ProtoDel International Limited
Vulcan House, Restmor Way, Hackbridge, Surrey, SM6 7AH, UK
Tel: +44 (0)20 8773 4248 Fax: +44 (0)20 8773 0016
Email: sales@protodel.com Web: www.protodel.com
Sept 2001
MODEL SPECIFICATIONS:
Model: 1 2 10 25 50 100
Source Line Width nm <5 2.5-5 1-2.5 0.4-1 0.2-0.4 0.1-0.2
Wavelength 980, 1300, 1480, 1550 1300, 1480, 1550
Residual extinction ratio (RER)(typical) <0.1dB <0.5dB
Excess / Insertion loss <1dB <2dB
DOP <5%
All dimensions are approximate and may vary slightly.
All quoted losses are without connectors
ORDERING INFORMATION:
PACKAGING:
Models 1, 2 & 10 Models 25 &50 Model 100
Box (LxWxH) 150 x 95 x 10mm 165 x 108 x 35mm 215 x 106 x 35mm
Pigtail 1m fiber standard, loose tube and cable options.
Connectors Optional
PID- - - - - -
Wavelength:
15 - 1550nm
14 - 1480nm
13 - 1300nm
09 - 980nm
Cable type:
1 - uncabled
fiber
2 - 900µm
Model Type:
01 - Model 1
02 - Model 2
10 - Model 10
25 - Model 25
50 - Model 50
100 - Model 100
Connectors:
0 - none
1 - FC/SPC
2 - FC/APC
Input & Output
fibre type:
SM - Single Mode
PM - Polarization
Maintaining
Packaging:
B - Boxed
N - No box