www.ti.com
FEATURES
DBVPACKAGE
(TOP VIEW)
3
2
4
51
NC VCC
Y
A
GND
Seemechanicaldrawingsfordimensions.
DNU – Donotuse
NC – Nointernalconnection
VCC
3
2
4
51
NC
Y
A
GND
DCKPACKAGE
(TOP VIEW)
VCC
DNU
GND Y
A
1
4
2
3
5
YZP PACKAGE
(BOTTOMVIEW)
DRY PACKAGE
(TOP VIEW)
A
NC 6
4
2
3
GND Y
VCC
1
5NC
PREVIEW
DESCRIPTION/ORDERING INFORMATION
SN74AUC1G14SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
•Available in the Texas Instruments •Low Power Consumption, 10- μA Max I
CCNanoFree™ Package
• ± 8-mA Output Drive at 1.8 V•Optimized for 1.8-V Operation and Is 3.6-V I/O
•Latch-Up Performance Exceeds 100 mA PerTolerant to Support Mixed-Mode Signal
JESD 78, Class IIOperation
•ESD Protection Exceeds JESD 22•I
off
Supports Partial-Power-Down Mode
– 2000-V Human-Body Model (A114-A)Operation
– 200-V Machine Model (A115-A)•Sub-1-V Operable
– 1000-V Charged-Device Model (C101)•Max t
pd
of 2.5 ns at 1.8 V
This single Schmitt-trigger inverter is operational at 0.8-V to 2.7-V V
CC
, but is designed specifically for 1.65-V to1.95-V V
CC
operation.
The SN74AUC1G14 contains one inverter and performs the Boolean function Y = A. The device functions as anindependent inverter, but because of Schmitt action, it may have different input threshold levels forpositive-going (V
T+
) and negative-going (V
T–
) signals.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as thepackage.
This device is fully specified for partial-power-down applications using I
off
. The I
off
circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.
For more information about AUC Little Logic devices, please refer to the TI application report, Applications ofTexas Instruments AUC Sub-1-V Little Logic Devices, literature number SCEA027.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.NanoFree is a trademark of Texas Instruments.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2001–2007, Texas Instruments IncorporatedPRODUCTION DATA information current as of publication date.Products conform to specifications per the terms of TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
A Y
2 4
Absolute Maximum Ratings
(1)
SN74AUC1G14
SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
ORDERING INFORMATION
ORDERABLE PART TOP-SIDET
A
PACKAGE
(1) (2)
NUMBER MARKING
(3)
NanoFree™ – WCSP (DSBGA)0.23-mm Large Bump – YZP Reel of 3000 SN74AUC1G14YZPR _ _ _UF_(Pb-free)–40 °C to 85 °C
SON – DRY Reel of 5000 SN74AUC1G14DRYR PREVIEWSOT (SOT-23) – DBV Reel of 3000 SN74AUC1G14DBVR U14_SOT (SC-70) – DCK Reel of 3000 SN74AUC1G14DCKR UF_
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see theTI website at www.ti.com .(3) DBV/DCK/DRY: The actual top-side marking has one additional character that designates the assembly/test site.YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one followingcharacter to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, •= Pb-free).
FUNCTION TABLE
INPUT OUTPUTA Y
H LL H
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 3.6 VV
I
Input voltage range
(2)
–0.5 3.6 VV
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 3.6 VV
O
Output voltage range
(2)
–0.5 V
CC
+ 0.5 VI
IK
Input clamp current V
I
< 0 –50 mAI
OK
Output clamp current V
O
< 0 –50 mAI
O
Continuous output current ±20 mAContinuous current through V
CC
or GND ±100 mADBV package 206DCK package 252θ
JA
Package thermal impedance
(3)
°C/WDRY package 234YZP package 132T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operatingconditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback
www.ti.com
Recommended Operating Conditions
(1)
SN74AUC1G14SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
MIN MAX UNIT
V
CC
Supply voltage 0.8 2.7 VV
I
Input voltage 0 3.6 VV
O
Output voltage 0 V
CC
VV
CC
= 0.8 V –0.7V
CC
= 1.1 V –3I
OH
High-level output current V
CC
= 1.4 V –5 mAV
CC
= 1.65 V –8V
CC
= 2.3 V –9V
CC
= 0.8 V 0.7V
CC
= 1.1 V 3I
OL
Low-level output current V
CC
= 1.4 V 5 mAV
CC
= 1.65 V 8V
CC
= 2.3 V 9T
A
Operating free-air temperature –40 85 °C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3Submit Documentation Feedback
www.ti.com
Electrical Characteristics
Switching Characteristics
SN74AUC1G14
SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS V
CC
MIN TYP
(1)
MAX UNIT
0.8 V 0.51.1 V 0.51 0.86V
T+
Positive-going input 1.4 V 0.65 1 Vthreshold voltage
1.65 V 0.79 1.162.3 V 1.11 1.560.8 V 0.31.1 V 0.22 0.53V
T–
Negative-going input 1.4 V 0.3 0.58 Vthreshold voltage
1.65 V 0.39 0.622.3 V 0.58 0.870.8 V 0.211.1 V 0.25 0.38ΔV
THysteresis 1.4 V 0.31 0.5 V(V
T+
– V
T–
)
1.65 V 0.37 0.622.3 V 0.48 0.77I
OH
= –100 μA 0.8 V to 2.7 V V
CC
– 0.1I
OH
= –0.7 mA 0.8 V 0.55I
OH
= –3 mA 1.1 V 0.8V
OH
VI
OH
= –5 mA 1.4 V 1I
OH
= –8 mA 1.65 V 1.2I
OH
= –9 mA 2.3 V 1.8I
OL
= 100 μA 0.8 V to 2.7 V 0.2I
OL
= 0.7 mA 0.8 V 0.25I
OL
= 3 mA 1.1 V 0.3V
OL
VI
OL
= 5 mA 1.4 V 0.4I
OL
= 8 mA 1.65 V 0.45I
OL
= 9 mA 2.3 V 0.6I
I
A input V
I
= V
CC
or GND 0 to 2.7 V ±5μAI
off
V
I
or V
O
= 2.7 V 0 ±10 μAI
CC
V
I
= V
CC
or GND, I
O
= 0 0.8 V to 2.7 V 10 μAC
i
V
I
= V
CC
or GND 2.5 V 3.5 pF
(1) All typical values are at T
A
= 25 °C.
over recommended operating free-air temperature range, C
L
= 15 pF (unless otherwise noted) (see Figure 1 )
V
CC
= 1.2 V V
CC
= 1.5 V V
CC
= 1.8 V V
CC
= 2.5 VV
CC
= 0.8 VFROM TO
±0.1 V ±0.1 V ±0.15 V ±0.2 VPARAMETER UNIT(INPUT) (OUTPUT)
TYP MIN MAX MIN MAX MIN TYP MAX MIN MAX
t
pd
A Y 5.8 0.7 4 0.6 2.3 0.5 1.2 1.9 0.5 1.6 ns
4
Submit Documentation Feedback
www.ti.com
Switching Characteristics
Operating Characteristics
SN74AUC1G14SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
over recommended operating free-air temperature range, C
L
= 30 pF (unless otherwise noted) (see Figure 1 )
V
CC
= 1.8 V V
CC
= 2.5 VFROM TO
±0.15 V ±0.2 VPARAMETER UNIT(INPUT) (OUTPUT)
MIN TYP MAX MIN MAX
t
pd
A Y 0.7 1.6 2.5 0.5 2.5 ns
T
A
= 25 °C
V
CC
= 0.8 V V
CC
= 1.2 V V
CC
= 1.5 V V
CC
= 1.8 V V
CC
= 2.5 VTESTPARAMETER UNITCONDITIONS
TYP TYP TYP TYP TYP
Power dissipationC
pd
f = 10 MHz 14 15 15 16 19 pFcapacitance
5Submit Documentation Feedback
www.ti.com
PARAMETER MEASUREMENT INFORMATION
NOTES: A. C includesprobeandjigcapacitance.
B. Waveform1isforanoutputwithinternalconditionssuchthattheoutputislow,exceptwhendisabledbytheoutputcontrol.
Waveform2isforanoutputwithinternalconditionssuchthattheoutputishigh,exceptwhendisabledbytheoutputcontrol.
C. Allinputpulsesaresuppliedbygeneratorshavingthefollowingcharacteristics:PRR 10MHz,Z =50 ,
slewrate 1V/ns.
D. Theoutputsaremeasuredoneatatime,withonetransitionpermeasurement.
E. t andt arethesameast .
F. t andt arethesameast .
G. t andt arethesameast .
L
O
PLZ PHZ dis
PZL PZH en
PLH PHL pd
£ W
³
FromOutput
UnderTest
C
(seeNote A)
L
LOADCIRCUIT
S1
2×VCC
Open
GND
RL
RL
t /t
PLH PHL Open
TEST S1
2×VCC
t /t
PLZ PZL
GND
t /t
PHZ PZH
0V
tW
Input
0V
Input
Output
Output
VOLTAGEWAVEFORMS
PROPAGATIONDELAY TIMES
INVERTING ANDNONINVERTINGOUTPUTS
VOLTAGEWAVEFORMS
PULSEDURATION
VCC/2
VCC/2 VCC/2
VCC/2
VOL
VOH
VCC
VCC
VOH
VOL
VCC/2
VCC/2
VCC/2
VCC/2
tPLH tPHL
tPLH
tPHL
th
tsu
DataInput
TimingInput
0V
0V
Output
Waveform1
S1at2×V
(seeNoteB)
CC
Output
Waveform2
S1atGND
(seeNoteB)
VOL
VOH
0V
»0V
Output
Control
VCC/2
VCC/2 VCC/2
VCC/2
VCC/2
VOLTAGEWAVEFORMS
ENABLE ANDDISABLETIMES
LOW- ANDHIGH-LEVEL ENABLING
VOLTAGEWAVEFORMS
SETUP ANDHOLDTIMES
VCC
VCC
VCC
VCC/2
VCC/2
VCC
tPZL tPLZ
tPHZ
tPZH
V – V
OH D
V +V
OL D
0.8V
1.2V 0.1V±
1.5V 0.1V±
1.8V 0.15V±
2.5V 0.2V±
1.8V 0.15V±
2.5V 0.2V±
VCC
2kW
2kW
2kW
2kW
2kW
1kW
500 W
RL
0.1V
0.1V
0.1V
0.15V
0.15V
0.15V
0.15V
VD
CL
15pF
15pF
15pF
15pF
15pF
30pF
30pF
SN74AUC1G14
SINGLE SCHMITT-TRIGGER INVERTER
SCES375O – SEPTEMBER 2001 – REVISED AUGUST 2007
Figure 1. Load Circuit and Voltage Waveforms
6
Submit Documentation Feedback
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
SN74AUC1G14DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14DBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14DCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74AUC1G14YZPR ACTIVE DSBGA YZP 5 3000 Green (RoHS &
no Sb/Br) SNAGCU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74AUC1G14 :
•Enhanced Product: SN74AUC1G14-EP
NOTE: Qualified Version Definitions:
•Enhanced Product - Supports Defense, Aerospace and Medical Applications
PACKAGE OPTION ADDENDUM
www.ti.com 6-Jan-2010
Addendum-Page 1
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74AUC1G14DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
SN74AUC1G14DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
SN74AUC1G14YZPR DSBGA YZP 5 3000 178.0 9.2 1.02 1.52 0.63 4.0 8.0 Q1
SN74AUC1G14YZPR DSBGA YZP 5 3000 180.0 8.4 1.02 1.52 0.63 4.0 8.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 30-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74AUC1G14DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
SN74AUC1G14DCKR SC70 DCK 5 3000 180.0 180.0 18.0
SN74AUC1G14YZPR DSBGA YZP 5 3000 220.0 220.0 35.0
SN74AUC1G14YZPR DSBGA YZP 5 3000 220.0 220.0 34.0
PACKAGE MATERIALS INFORMATION
www.ti.com 30-Jul-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated