VCSEL, Green, Red & Infrared Laser Modules & Optical Transceivers by Lasermate VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | LASERMATE CORPORATION manufactures green, red, & infrared laser diode modules & products, including diode pumped solid-state green lasers, laser sights, and green & red laser pointers, as well as fiber optic components & products, including pigtailed & receptacle 1310 nm & 1550 nm communication laser diodes and 850 nm VCSEL (or Vertical Cavity Surface Emitting Laser) diodes as optical transmitters, connectorized GaAs PIN & InGaAs PIN photodiodes as optical receivers, and integrated optical transmitters and receivers as optical transceivers for 100 Mbps Fast Ethernet transceiver, 155 Mbps ATM transceiver, 622 Mbps ATM OC-12, 1.0625 Gbps Fiber Channel & 1.25 Gbps Gigabit Ethernet transceiver. We also supply VCSEL chip, 1D & 2D arrays, GaAs PIN chip & array, InGaAs PIN chip & array, laser diodes, PIN photodiodes, diffractive optics, diode driver circuit boards, and laser safety goggles. Please click the item of interest below for more detail information. VCSELs Green, Red, & Infrared Laser Diode Modules On Sale Items Green & Red Laser Pointers Laser Diodes Laser Accessories Communication Lasers Electroluminescent Products Photodiode Receivers Fiber Optical Transceivers SPECIAL OFFER! Green Laser Pointer only $199.00 each! New Products: Focusable 532 nm DPSS green laser modules Connectorized 1310nm & 1550nm DFB laser diode modules 1310 nm & 1550nm 155Mbps STM-1 transmitter & receiver modules 1310 nm & 1550nm 155Mbps STM-4 transmitter & receiver modules For order methods, terms & conditions, and order form, please click HOW TO ORDER. VCSEL, Green, Red & Infrared Laser Modules & Optical Transceivers by Lasermate Please update our new address/phone numbers! Address: 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 E-mail: info@lasermate.com Web:http://www.lasermate.com Foods for Brain Book Store Laser Optics Electronics Fast Ethernet ATM Fiber Channel Gigabit Ethernet Safety To receive the fastest response, please call Lasermate Corporation at (909) 718-0999. You are visitor number since June 27, 1996 Local time: Walnut, California Comments and Questions mail to: info@lasermate.com Information contained herein is considered typical data. Lasermate Corporation reserves the right to change or modify specifications of products at any time without notice. Copyright (c) 1996-2000 by Lasermate Corporation. All rights reserved. HOME | PRODUCT LIST | HOW TO ORDER | QUO & INFO REQUEST | VCSEL (Vertical Cavity Surface Emitting Laser) VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCSEL (Vertical Cavity Surface Emitting Laser): The Next Generation Laser We supply both ion-implant VCSEL and oxidation VCSEL with high performance and high speed for data communications as well as sensing applications, which requires gaussian beam and low beam divergence. Ion-implant VCSELs designed for CWDM (coarse wavelength division multiplexing) data communications with custom-matched wavelength spacing from 770nm to 870nm are available. In addition, single mode VCSEL with 0.1nm spectrum linewidth is also available for better performance. For more information regarding VCSEL used in CWDM or other applications, please contact Paul Lin at tel: (909)718-0999 or e-mail: paul@lasermate.com. Please click the item of interest below for more information. Brief in VCSEL VCSEL Chip or Die VCSEL 1D Arrays (1xN Array) VCSEL 2D Arrays (NxN Array) VCSEL Diodes for General and Communication Applications Connectorized VCSEL Diodes in FC, SC & ST Receptacle VCSEL Fiber Optical Transceivers: from 100 Mb/s Fast Ethernet to 1.25 Gb/s Gigabit Ethernet If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | HOW TO ORDER | QUO & INFO REQUEST | VCSEL (Vertical Cavity Surface Emitting Laser) Communication Lasers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Communication Lasers Please click the item of interest below for more information. Connectorized 1310 nm FP Laser Diodes in Pigtail or Receptacle with Pinout A or B Configuration Connectorized 1550 nm FP Laser Diodes in Pigtail or Receptacle with Pinout A or B Configuration Connectorized 1310 nm DFB Laser Diodes in Pigtail with Pinout A or B Configuration Connectorized 1550 nm DFB Laser Diodes in Pigtail with Pinout A or B Configuration 1310 nm & 1550 nm 155Mbps STM-1 Tx/Rx Optical Transmitter & Receiver Modules 1310 nm & 1550 nm 622Mbps STM-4 Tx/Rx Optical Transmitter & Receiver Modules Communication Lasers If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSEL (Vertical Cavity Surface Emitting Laser) VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCSEL (Vertical Cavity Surface Emitting Laser): The Next Generation Laser We supply both ion-implant VCSEL and oxidation VCSEL with high performance and high speed for data communications as well as sensing applications, which requires gaussian beam and low beam divergence. Ion-implant VCSELs designed for CWDM (coarse wavelength division multiplexing) data communications with custom-matched wavelength spacing from 770nm to 870nm are available. In addition, single mode VCSEL with 0.1nm spectrum linewidth is also available for better performance. For more information regarding VCSEL used in CWDM or other applications, please contact Paul Lin at tel: (909)718-0999 or e-mail: paul@lasermate.com. Please click the item of interest below for more information. Brief in VCSEL VCSEL Chip or Die VCSEL 1D Arrays (1xN Array) VCSEL 2D Arrays (NxN Array) VCSEL Diodes for General and Communication Applications Connectorized VCSEL Diodes in FC, SC & ST Receptacle VCSEL Fiber Optical Transceivers: from 100 Mb/s Fast Ethernet to 1.25 Gb/s Gigabit Ethernet VCSEL (Vertical Cavity Surface Emitting Laser) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Photodiode Receivvers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Photodiode Receivers Our photodiodes including GaAs PIN and InGaAs PIN photodiodes and pre amplified photodiodes are highly sensitive and reliable for data and telecommunication applications. The packages of photodiodes in connectorized FC/SC/ST receptacle and pigtail are available. The 1 x N (N= 2, ..., 40) GaAs and InGaAs PIN arrays are also available. Please click the item of interest below for more information. GaAs PIN Photodiode for 500 - 850 nm Emitter InGaAs PIN Photodiode for 850 nm - 1300 nm Emitter InGaAs/InP PIN Photodiode for 1110 nm - 1650 nm Emitter 1 x N (N = 1, ..., 40) GaAs PIN Photodiode Chip & Arrays 1 x N (N = 1, ..., 40) InGaAs PIN Photodiode Chip & Arrays If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Fiber Optical Transceivers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Fiber Optical Transceivers 1. Using 850 nm VCSEL short wavelength technology 2. Using 1310 nm Commuication Laser 3. Using 1550 nm Commuication Laser 4. Special Offer: Better Solution for Ethernet 10BaseFL Applications 1. Using 850 nm VCSEL short wavelength technology Lasermate provides 9-Pin 850nm VCSEL SC/ST duplex 100/155/622/1250 Mbps multimode fiber transceivers using advanced VCSEL short wavelegth technology for Fast Ethernet, FDDI, ATM, Fiber Channel & Gigabit Ethernet. They are fully compatible to other existing products such as Hewlett-Packard, AMP & SUMITOMO. Our 850nm VCSEL 155Mbps SC/ST duplex multimode transceivers are intended to provide low cost SONET OC3/FDDI/Fast Ethernet link to distances up to 2000 meters in 62.5/125m multimode fiber optic cables. Please click below for more information. 850nm VSCEL SC/ST Duplex Multimode Fiber Optical Transceiver Modules: from 100 Mb/s Fast Ethernet to 1.25 Gb/s Gigabit Ethernet Transceiver 2. Using 1310 nm Commuication Laser Lasermate supplies 9-Pin 1310 nm laser SC/ST/FC duplex 155/622/1250 Mbps single mode fiber transceiver for Fast Ethernet, FDDI SMF-PMD 1, ATM, Fiber Channel & Gigabit Ethernet. They are compatible to other existing products such as Hewlett-Packard, MRV, Siemens, AMP & SUMITOMO. Please click below for more information. 1310 nm Laser SC/ST/FC Duplex Single Mode Fiber Optical Transceivers: from 155 Mb/s ATM to 1.25Gb/s Gigabit Ethernet Transceiver 3. Using 1550 nm Commuication Laser Lasermate offers 9-Pin 1550 nm laser SC (or ST/FC) duplex 155 Mbps single mode fiber transceiver for ATM 155Mb/s Links, SONET/SDH Equipment Interconnect & WDM applications. The transmission distance is at least 10km in traditional single mode fiber system and at least 30km for the dispersion shift fiber system. This module can be cooperated with 1310nm single mode transceiver module to form a 2-wavelength optical data system. This transceiver module is compatible to other existing products such as MRV. Please click below for more information. 1550 nm Laser 155 Mbps SC Duplex Single Mode Fiber Optical Transceiver For your information, 9-Pin 1550 nm laser SC/ST/FC duplex 622 Mbps and 1.25 Gbps single mode fiber transceivers are also available upon requested. Fiber Optical Transceivers 4. Special Offer: Better Solution for Ethernet 10BaseFL Applications Better Solution for Ethernet 10BaseFL Applications Using High Qaulity & Low Cost of 850nm VCSEL Transmitter & GaAs PIN Potodiode Receiver- Compatiable to HP's & Honeywell's. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Foods For Brain Book Store VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Foods for Brain Book Store Please click the item of interest below for more information. Laser Optics Electronics Fiber Optics Fast Ethernet ATM Fiber Channel Gigabit Ethernet Safety If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | On Sale Items VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | On Sale Items LIMITED QUANTITY & LIMITED TIME! Please click the item of interest below for more information. Fashionable Keychain Laser Pointers ONLY $7.95 European's Favorite Laser Card Pointers ONLY $14.95 Classical Laser Pointers ONLY $19.95 Super Bright Class II <1 mW Green Laser Pointers ONLY $199.00 Super Bright Class IIIa Green Laser Pointers ONLY $275.00 Overstock OEM Industrial Laser Diode Modules with 25-50% Discount ONLY $29.00 9-Pin 850nm VCSEL SC Duplex 100 Mbps Multimode Fiber Optical Transceivers for Fast Ethernet ONLY $59.00 If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Green, red, & infrared laser diode modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Green, Red & Infrared Laser Diode Modules Please click the item of interest below for more information. General Information and Service Red & Infrared Laser Diode Modules 532 nm Diode Pumped Solid State Green Lasers High Power Laser Diode Modules 1064 nm Diode Pumped Solid State Laser Modules Overstock OEM Laser Diode Modules with 25-50% Discount If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSEL (Vertical Cavity Surface Emitting Laser) VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Laser Diodes A: Visible Red Laser Diodes B: Infrared Laser Diodes C: Communication Laser Diodes Features Visible red laser diodes, Infrared laser diodes, and Communication laser diodes High Quality and Low Cost Wide Range of Wavelength (635 nm - 1550 nm) and Output Power (5 mW - 1000 mW) Package: TO-5 (dia. 9 mm), TO-18 (dia. 5.6 mm) & TO-46 (dia. 5.4 mm) Connectorized (pigtailed & receptacle) packages also available A: Visible Red Laser Diodes Pin Configuration VCSEL (Vertical Cavity Surface Emitting Laser) Specifications of the 650nm/5mW laser diode for -10 to 40 oC operating temperature (LD-650-5B) Specifications of the 650nm/5mW laser diode for -10 to 50 oC operating temperature (LD-650-5A) Specifications of the 650nm/5mW laser diode for -10 to 60 oC operating temperature (LD-650-5E) Specifications of the 650nm/10mW laser diode -10 to 40 oC operating temperature (LD-650-10I) Specifications of the 650nm/20mW laser diode -10 to 40 oC operating temperature (LD-650-20G) Specifications of the 635nm/5mW laser diode -10 to 40 oC operating temperature (LD-635-5A) Specifications of the 635nm/5mW laser diode -10 to 40 oC operating temperature (LD-635-5L) Specifications of the 635nm/5mW laser diode -10 to 50 oC operating temperature (LD-635-5I) Specifications of the 635nm/10mW laser diode -10 to 40 oC operating temperature (LD-635-10I) Specifications of the 635nm/15mW laser diode -10 to 40 oC operating temperature (LD-635-15I) NEW ITEM! B: Infrared Laser Diodes Specifications of the VCSEL 780nm/5mW laser diode Specifications of the 808nm/5mW laser diode (LD-808-5I) Specifications of the 808nm/200mW laser diode (LD-808-200G) Specifications of the 808nm/500mW laser diode (LD-808-500G) Specifications of the 808nm/1000mW laser diode (LD-808-1000G) Specifications of the 808nm/1000mW laser diode (LD-808-1W) Specifications of the 830nm/40mW laser diode (LD-830-40I) Specifications of the 980nm/50mW laser diode (LD-980-50I) NEW ITEM! Specifications of the 980nm/100mW laser diode (LD-980-100I) NEW ITEM! C: Communication Laser Diodes Specifications of the 850nm/5mW VCSEL diodes Connectorized 1310nm FP & DFB laser diodes Connectorized 1550nm FP & DFB laser diodes VCSEL (Vertical Cavity Surface Emitting Laser) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Laser Accessories VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Laser Accessories Please click the item of interest below for more information. Driver Circuit Boards Optics OEM Diffractive Optics Goggles for Laser Safety, Alignment, & Spot Finder If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Laser Products VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Laser Products Please click the item of interest below for more information. (Distributor & Sales Rep. Wanted !) Educational DIY Laser Pointers Super Bright Green Laser Pointers (2xN Batteries) $275.00 Only Classical Laser Pointers Super Bright Green Laser Pointers (2xAAA Batteries) $199.00 Only! Fashionable Keychain Laser Pointers Super Bright Green Laser Pointers (1xLithium Battery) $295.00 Only European's Favorite Laser Card Pointers Laser Aimer If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Electroluminescent Products VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Electroluminescent Products WHAT IS AN ELECTROLUMINESCENCE (or E.L.)? ELECTROLUMINESCENCE MEANS TO APPLY ELECTRICITY FOR EMITTING LIGHT. THIS COLD ILLUMINATION SOURCES TECHNOLOGY IS HIGHLY INVOLVED WITH MOLECULAR CHEMISTRY, APPLIED MATERIAL SCIENCE,VACUUM TECHNIQUES AND ELECTRONIC CONTROL DEVICES, i.e.. IT IS A TECHNICAL-INTENSIVE INDUSTRY. E.L. ADVANTAGES: LIGHT AND THIN SURFACE ILLUMINATION WITH HIGH BRIGHNESS UNIFORMITY FLEXIBLE AND CAN BE FABRICATED TO COMPLEX SHAPE COLD LIGHT SOURCES WITH NO ULTRAVIOLET RAYS EMITTED LOWER OPERATING CURRENT VIBRATION AND MOISTURE RESISTANT REASONABLE COST Electroluminescent Products E.L. APPLICATIONS: BACKLIGHTING: PANELS, INSTRUMENTS, GAUGES. SIGNS: COMMERCIALS, EMERGENCY, INDICATORS. LIGHTINGS: SAETY, RESCUE, P.O.P.. TOYS & PREMIUMS: LIGHT SOURCES, FUN, PET. TERMININAL DISPLAYS: E.L. BOARDS, TV/COMPUTER TERMINAL. EL products are a "COLD" light source. They are cool to the touch. No heat is generated by the light producing mechanisms of an EL product. Our ELs have an expected lifetime of 5,000 hours, unless its thin plastic layers are damaged. Please call or e-mail for special designs or large quantities. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Quotation and Information Request Form VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Quotation and Information Request Form To receive the fastest response, please call Lasermate Corporation at (909)718-0999. If you have any comments or requests for product information, please fill in the following form: Name: Company: Mailing Address: Tel: Fax: e-mail: Note: If your browser does not support forms, e-mail your request to:info@lasermate.com To receive more efficient response, please check one or more of the following products of interest. Laser Diode Modules Please Indicate: Wavelength: Operating voltage: Optical output power: Operating temperature: Beam Shape: Focus: Dimensions: Applications: Quotation and Information Request Form Model No.: Quantity: Delivery time required Communication Laser Diode Connectorized Laser Diode Fiber Optical Transceiver Please Indicate: Transmitter Wavelength: Output power: Package: Model No.: Quantity: Delivery time required Photo Diode Connectorized Photo Diode Please Indicate: Wavelength: Package: Model No.: Quantity: Delivery time required Laser Diodes Please Indicate: Wavelength: Output power: Model No.: Quantity: Delivery time required Laser Pointers Please Indicate: Wavelength: Model No.: Output power: Quotation and Information Request Form Quantity: Delivery time required Laser Aimers Please Indicate: Wavelength: Output power: Applications: Green Laser Head Green Laser Module Green Laser System Please Indicate: Output power: Applications: Model No.: Quantity: Delivery time required Accessories (Circuit board, Optics, etc..) Please Indicate: Item: Model No.: Quantity: Comments: Delivery time required Quotation and Information Request Form Send Reset If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSEL, Green, Red & Infrared Laser Modules & Optical Transceivers by Lasermate VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Welcome to Lasermate Corporation - The Friend of Lasers LASERMATE CORPORATION manufactures green, red, & infrared laser diode modules & products, including diode pumped solid-state green lasers, laser sights, and green & red laser pointers, as well as fiber optic components & products, including pigtailed & receptacle 1310 nm & 1550 nm communication laser diodes and 850 nm VCSEL (or Vertical Cavity Surface Emitting Laser) diodes as optical transmitters, connectorized GaAs PIN & InGaAs PIN photodiodes as optical receivers, and integrated optical transmitters and receivers as optical transceivers for 100 Mbps Fast Ethernet transceiver, 155 Mbps ATM transceiver, 622 Mbps ATM OC-12, 1.0625 Gbps Fiber Channel & 1.25 Gbps Gigabit Ethernet transceiver. We also supply VCSEL chip, 1D & 2D arrays, GaAs PIN chip & array, InGaAs PIN chip & array, laser diodes, PIN photodiodes, diffractive optics, diode driver circuit boards, and laser safety goggles. Please click the item of interest below for more detail information. VCSELs On Sale Items Green, Red, & Infrared Laser Diode Modules Green & Red Laser Pointers Laser Diodes Communication Lasers Laser Accessories Photodiode Receivers Electroluminescent Products Fiber Optical Transceivers SPECIAL OFFER! Green Laser Pointer only $199.00 each! New Products: Focusable 532 nm DPSS green laser modules Connectorized 1310nm & 1550nm DFB laser diode modules 1310 nm & 1550nm 155Mbps STM-1 transmitter & receiver modules 1310 nm & 1550nm 155Mbps STM-4 transmitter & receiver modules For order methods, terms & conditions, and order form, please click HOW TO ORDER. VCSEL, Green, Red & Infrared Laser Modules & Optical Transceivers by Lasermate Please update our new address/phone To receive the fastest response, please call Lasermate numbers! Corporation at (909) 718-0999. Address: 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 E-mail: info@lasermate.com Web:http://www.lasermate.com You are visitor number since June 27, 1996 Local time: Walnut, California Foods for Comments and Questions mail to: info@lasermate.com Brain Book Store Information contained herein is considered typical data. Lasermate Corporation Laser reserves the right to change or modify specifications of products at any time without notice. Optics Electronics Fast Ethernet ATM Fiber Channel Gigabit Ethernet Safety Copyright (c) 1996-2000 by Lasermate Corporation. All rights reserved. HOME | PRODUCT LIST | HOW TO ORDER | QUO & INFO REQUEST | Laser Safety Goggle - Laser Shield, Laser alignment, laser enhancer VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Goggles for Lasers Please click the item below for price and spec information. LaserShields: polycarbonate laser safety goggles Laser Alignment Lightweight Protection High Optical Densities Excellent Visibility Wide Field of View Laser Enhancer: red laser spot finder goggle Please click here for the pictures of various goggle styles If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Laser Safety Goggle - Laser Shield VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | LaserShield Polycarbonate Laser Safety Goggles Please click here for the pictures of various goggle with style code. Laser Safety Goggle Alexandrite Diode 1-CE Approved Model No.: ALX300,700,900 ALX#30,31,32,39,60 ALX700--CE model Argon-KTP-CE Approved Model No.: ARG300,700,900 ARG#30,31,32,39,60 ARG700--CE model Alexandrite Diode 3 Model No.: AXD300,700,900 AXD#30,31,32,39,60 Alexandrite Diode 2-CE Approved Model No.: AXX300,700,900 AXX#30,31,32,39,60 AXX700--CE model CO2 Model No.: CO2300,700,900 CO2#30,31,32,39,60 Wavelength Optical Visible Light Density Transmission 720-840 755 809 6+ 7+ 7+ Price 24.5 % $155.00 Laser Safety Goggle Carbon Dioxide/Excimer-CE Approved Wavelength Optical Visible Light Density Transmission 190-398 10,600 5+ 5+ Price 92.9 % $90.00 Model No.: ECO900--CE model 190-449 450-532 5+ 6+ 38.4 % Excimer 190-398 5+ 92.9 % Model No.: $90.00 EXC300,700,900 EXC#30,31,32,39,60 720-830 755 810 5+ 6+ 6+ 37.9 % 720-830 755 809 6+ 6+ 7+ 32.6 % Krypton (Red)/HeNe $50.00 190-380 606-694 $155.00 Model No.: KRR300,700,900 KRR#30,31,32,39,60 Krypton 190-575 (Yellow)/Copper Vapor 5+ 5+ 17.6 % $120.00 5+ 9.2 % $155.00 Model No.: KRY300,700,900 KRY#30,31,32,39,60 190-360 10,600 5+ 5+ 92.9 % Ruby $35.00 Model No.: RB2300,700,900 RB2#30,31,32,39,60 $120.00 694 5+ 69.8 % $140.00 Laser Safety Goggle - Laser Shield Nd:Yag-Harmonics-CE 190-534 1064 Approved Model No.: DBY300,700,900 DBY#30,31,32,39,60 DBY900--CE model 810 Diode Model No.: DI2300,700,900 DI2#30,31,32,39,60 Diode-KTP Model No.: DI3300,700,900 DI3#30,31,32,39,60 Diode Model No.: DIO300,700,900 DIO#30,31,32,39,60 Dye Model No.: DYE300,700,900 DYE#30,31,32,39,60 IR Diode Model No.: IRD300,700,900 IRD#30,31,32,39,60 190-390 800-820 5+ 5+ 5+ 5+ 16.3 % 61 % 190-449 450-532 800-820 5+ 6+ 5+ 32 % 190-380 760-890 5+ 5+ NA % 190-380 565-600 585 5+ 5+ 6+ 190-380 5+ 760-1725 2+ Ruby/Diode-CE Approved 675-850 $220.00 Model No.: RD2300,700,900 RD2#30,31,32,39,60 RD2700--CE model Nd: 190-534 YAG-Harmonics-Diode 720-1064 738-845 $175.00 Model No.: 1064 YAD300,700,900 YAD#30,31,32,39,60 Nd:YAG-CE Approved 1064 5+ 16.9 % $155.00 5+ 5+ 6+ 6+ 10.6 % 7+ 58.7 % $255.00 $210.00 Model No.: YAG700--CE model 6.7 % 46.5 % Nd:YAG Wideband $120.00 Model No.: YG2300,700,900 YG2#30,31,32,39,60 Nd:YAG (YG3)-CE Approved $155.00 190-380 5+ 770-1100 5+ 1064 6+ 20.2 % 190-380 5+ 1064 7+ 980-1070 5+ 58.7 % $155.00 $140.00 Model No.: YG3300,700,900 YG3#30,31,32,39,60 YG3900--CE model $160.00 $155.00 Note: Please click here for the pictures of goggle style LaserShields meet ANSI Z136.1 laser protection standards and Z87.1 impact standards. STYLE CODE 300 - Wrap-Around 900 - Large Fitover #32 - Adjustable Spectacle #31 - Medium Framed Fitover 700 - Medium Fitover #60 - Softie Goggle #30 - Framed Wrap-Around #39 - Large Framed Fitover If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Goggle Style for Laser Shield, Laser alignment, laser enhancer VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Style Codes & Pictures of Laser Goggles Style code: 300 Non-Fitover Wrap-Around w/Side Shields Style code: 700 Medium Fit-Over w/Side Shields Style code: 900 Large Fit-Over w/Side Shields Style code: #30 Non-Fitover Framed Wrap-Around Style code: #31 Medium Framed Fitover Style code: #39 Large Framed Fitover Style code: #32 Adjustable Spectacle Style code: 60 Softie Goggle Please click the item below for price and spec information. LaserShields: polycarbonate laser safety goggles Laser Alignment Laser Enhancer: red laser spot finder goggle Goggle Style for Laser Shield, Laser alignment, laser enhancer If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Error - Not Found Error - Not Found The URL you requested does not exist on the KTBNET Web Server. The problem may be due to one of the following: You typed the URL incorrectly. You followed an invalid link or someone gave you an incorrect URL. The KTBNET member is no longer publishing the page. The KTBNET member has changed the URL. The server is currently busy. Please try again later. Comments and Questions mail to: webmaster@ktb.net Copyright (c) 1995-2000 by KTB Internet Online. All rights reserved. Laser Safety Goggle - Laser Shield, Laser alignment, laser enhancer VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Laser Enhancer: red laser spot finder goggle Model No.: Enhanced Wavelength Optical Density Visible Light Transmission Price PLV#30, 31, 39 620 nm - 700 nm NA 2.7% $30.00 Please click here for the pictures of various goggles with style code Please click the item below for price and spec information. Lightweight Protection LaserShields: polycarbonate laser safety goggles High Optical Densities Excellent Visibility Laser Alignment Wide Field of View If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Laser Safety Goggle - Laser Shield, Laser alignment, laser enhancer PRODUCT LIST VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | PRODUCT LIST OEM GREEN, RED & INFRARED LASER DIODE MODULES & PRODUCTS: Red & infrared laser diode modules Diode pumped solid-state green lasers Green & Red laser pointers Laser sights LASER DIODE & ACCESSORIES: Red & infrared laser diodes Collimating optics Diffractive optics Diode driver circuit boards Laser safety goggles. DATA COMMUNICATION & TELECOMMUNICATION COMPONENTS: 850 nm VCSEL (or Vertical Cavity Surface Emitting Laser) chips, 1D & 2D arrays & diodes 1310 nm & 1550 nm communication laser diodes Receptacle 850nmVCSEL diodes Connectorized (or pigtailed & receptacle) 1310 nm & 1550 nm communication laser diodes PHOTODIODE RECEIVERS: GaAs PIN photodiode & arrays GaAs PIN photodiode plus AGC Preamplifier Connectorized GaAs PIN photodiode plus AGC Preamplifier InGaAs PIN photodiode & arrays InGaAs PIN photodiode plus AGC Preamplifier Connectorized InGaAs PIN photodiode plus AGC Preamplifier FIBER OPTICAL TRANSCEIVERS: 100 Mbps Fast Ethernet transceiver 155 Mbps ATM transceiver 622 Mbps ATM OC-12 1.0625 Gbps Fiber Channel 1.25 Gbps Gigabit Ethernet transceiver PRODUCT LIST ELECTROLUMINESCENT PRODUCTS: E-LITE series E-FEELINGS series If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | ORDER FORM Purchasing Order & Credit Card Authorization Form If you wish to charge the amount of your advance orders to your credit card account, please complete the information requested below and fax this form to (909)718-0998 Lasermate Corporation. Purchasing Order Date (mm-dd-yy):_____ - _____ - ______ QTY Model No. Brief Description Unit price Amount ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ SALES ____________ (1 week $5 (<$100 order), $7 (>$100) ; 2nd Day $10; Next Day $18 in USA) FREIGHT ____________ (8.25% sales tax for California residents) SALES TAX ____________ TOTAL ____________ Credit Card Authorization Form Charge to: ____ MasterCard ____ Visa ____ American Express Amount: USD____________ Cardholder's name:______________________________________________________ Card No. : |___|___|___|___|___|___|___|___|___|___|___|___|___|___|___|___| Expiration Date:|___|___|___|___| Cardholder's Signature:___________________________________________________ Phone Number: ________________________ Fax number: ______________________ Cardholder Address:______________________________________________ _________________________________________________ _________________________________________________ Shipping Address:_______________________________________________ _______________________________________________ _______________________________________________ Green Laser Pointers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Green Laser Pointers ONLY $199.00 for GLS-L & $219.00 for GLS-H! ONLY $275.00 for GLP-03-B (or -S) & $325.00 for GLP-05-B (or -S)! PLEASE SEE CLICK ABOVE ITEMS FOR MORE INFORMATION. GLS- Series Green laser pointers FEATURES: LOWER OPERATING CURRENT TYPICAL 245 mA! TWO AAA BATTERIES OPERATED. CLASSICAL DESIGN WITH IMPROVED SWITCH. LOW COST. Green Laser Pointers SPECIFICATIONS MODEL NO. WAVELENGTH PULSED PEAK POWER LASER CLASS RANGE* HOUSING BODY COLOR OPERATION SWITCH BATTERY DIMENSIONS UNIT PRICE WARRANTY GLS-L 532 NM 0.5- 1.14 MW @ 25 oC IIIa <700 YARD BRASS SILVER PUSH BUTTON (METAL) 2 X AAA 1.5V (INCLUDED) DIA. 1.3 X L. 16.5 CM $199.00 90 DAYS GLS-H 532 NM 1.14- 4.99 MW @ 25 oC IIIa < 2,100 YARD BRASS SILVER PUSH BUTTON (METAL) 2 X AAA 1.5V (INCLUDED) DIA. 1.3 X L. 16.5 CM $219.00 90 DAYS *The range of laser is variable with factors such as background lightness and air quality. For your information, the 532 nm laser is about 35 time brighter the 670 nm laser. GLP- Series Green Laser Pointers FEATURES: LOWER OPERATING CURRENT TYPICAL 230 mA! COMPACT PACKAGE FITTING IN YOUR POCKET. BETTER SWITCH DESIGN. ELEGENT DESIGN BETTER PERFORMANCE. Green Laser Pointers SPECIFICATIONS MODEL NO. WAVELENGTH PULSED PEAK POWER LASER CLASS RANGE* HOUSING BODY COLOR OPERATION SWITCH BATTERY DIMENSIONS UNIT PRICE WARRANTY GLP-03-B (or -S) 532 NM 1.5 - 3 MW @ 25 oC IIIA < 2,100 YARD BRASS BLACK (OR SILVER) PUSH BUTTON 2 X "N" 1.5V (INCLUDED) DIA. 1.3 X L. 13.6 CM $275.00 90 DAYS GLP-05-B (or-S) 532 NM 3 - 5 MW @ 25 oC III A < 3,500 YARD BRASS BLACK (OR SILVER) PUSH BUTTON 2 X "N" 1.5V (INCLUDED) DIA. 1.3 X L. 13.6 CM $325.00 90 DAYS *The range of laser is variable with factors such as background lightness and air quality. For your information, the 532 nm laser is about 35 time brighter the 670 nm laser. To order please click here to use the order form. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Focusable 532 nm Diode Pumped Solid State Green Laser Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Focusable GMA- Series 532 nm DPSS Green Laser Modules GMA- Series 532 nm DPSS Green Laser Modules with CW Mode GMA- Series 532nm DPSS Green Laser Modules with TTL Modulation GMA- Series 532nm DPSS Green Laser Modules with Analog Modulation Specifications of GMA- Series 532 nm DPSS Green Laser Modules Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC Operating Current (A) Operating Voltage Focus Circuit Design Operation Mode M2 0.5-0.99 1.5-3 3-5 (X=1) (X=3) <0.45 (X=5) GMA-532-XA5 532 nm TEMoo 8-10 11-15 (X=10) (X=15) <0.65 5 +/- 0.5VDC Adjustable focus from 5 cm to infinity ACC CW <2 16-20 21-25 (X=20) (X=25) <0.75 Focusable 532 nm Diode Pumped Solid State Green Laser Modules Linewidth Polarization Beam Divergence Beam Diameter (1/e2) Stability* Connector Storage Temperature Optimum Operating Temperature MTTF** Dimensions (LxWxH) < 0.1 nm Linear <1.4 mrad < 1 mm 20% @ 25 3 oC Black (-) & red (+) wires 10 - 50 oC 22-28 oC 5,000 hrs Dia. 17 x 30 mm + 20 x 20 x 20 mm (green laser head) 32 x 15 mm (driver circuit board) 20 x 18 x 15 mm (heat sink) 43 x 43 mm (soft-start PCB) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMA-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. TTL Modulation of GMA- Series 532nm DPSS Green Laser Modules Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 0.5-0.99 oC (X=1) Operating Current (A) Operating Voltage Control Voltage Focus Circuit Design Operation Mode Bandwidth M2 1.5-3 3-5 (X=3) <0.45 (X=5) GMA-532-XA5-T 532 nm TEMoo 8-10 11-15 (X=10) (X=15) <0.65 5 VDC Max. 5 VDC Adjustable focus from 5 cm to infinity ACC with modulator and soft-start protection TTL From DC to 10KHz <2 Linewidth < 0.1 nm Polarization Linear Beam Divergence <1.4 mrad 2 < 1 mm Beam Diameter (1/e ) Stability* 20 % @ 25 3 oC Connector Black (-), red (+) & yellow (control) wires Storage Temperature 10 - 50 oC Optimum Operating Temperature 22-28 oC MTTF** 5,000 hrs Dimensions (LxWxH) Dia. 17 x 30 mm + 20 x 20 x 20 mm (green laser head) 50 x 50 mm (driver circuit board) 20 x 18 x 15 mm (heat sink) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. 16-20 21-25 (X=20) (X=25) <0.75 Focusable 532 nm Diode Pumped Solid State Green Laser Modules ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMA-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Analog Modulation of GMA- Series 532nm DPSS Green Laser Modules Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC Operating Current (A) Operating Voltage Control Voltage Focus Circuit Design Operation Mode Bandwidth 0.5-0.99 1.5-3 (X=1) (X=3) <0.45 M2 GMA-532-XA5-M 532 nm TEMoo 3-5 8-10 11-15 (X=5) (X=10) (X=15) 16-20 21-25 (X=20) (X=25) <0.65 5 VDC Max. 5 VDC Adjustable focus from 5 cm to infinity ACC with modulator and soft-start protection Analog From DC to 10KHz <0.75 <2 Linewidth < 0.1 nm Polarization Linear Beam Divergence <1.4 mrad < 1 mm Beam Diameter (1/e2) Stability* 20% @ 25 3 oC Connector Black (-), red (+) & yellow (control) wires Storage Temperature 10 - 50 oC Optimum Operating Temperature 22-28 oC MTTF** 5,000 hrs Dimensions (LxWxH) Dia. 17 x 30 mm + 20 x 20 x 20 mm (green laser head) 50 x 50 mm (driver circuit board) 20 x 18 x 15 mm (heat sink) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMA-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Note: The specification is subject to change without notice. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Focusable 532 nm Diode Pumped Solid State Green Laser Modules 155Mbps STM-1 Tx/Rx Optical Module VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1310 nm & 1550 nm STM-1 Transmitter & Receiver Modules Read Model No. TW-X-Y-Z-512 Read Model No. RW-X-Y-Z-512 TW = Transmitter 1310 nm laser (TW=T3) 1550nm laser (TW=T5) RW = Receiver Standard (RW= RA) With CLK pin B (RW=RB) With CLK pin C (RW=RC) X = Package Pigtail (X=P), Receptacle (X=R) X = Package Pigtail (X=P), Receptacle (X=R) Y = Connector FC: (Y = FC), SC: (Y=SC) ST: (Y=ST) Y = Connector FC:(Y = FC), SC: (Y=SC) ST: (Y=ST) Z = Output Power -3 dBm - 0 dBm (Z=1), -12dBm - 8 dBm (Z=2) Z = Sensitivity <-35 dBm (Z=2) 512 = supply voltage, data rate 5V, 155Mbps STM-1, 20 pins dual & pin number in line 512 = supply voltage, data rate 5V, 155Mbps STM-1, 20 pins dual in & pin number line FEATURES Data Rate: 155Mbps, NRZ Power Supply Voltage: Single+5V Electrical Interface: Differential PECL Pin-Configuration: 20 pins Dual in Line Connector Interface: FC/PC Receiver: Clock Recovery Circuit Available APPLICATIONS ATM/SONET OC-3/SDH STM-1 Active Star Network Point to Point Links Fiber size: 9/125m ELECTRICAL INTERFACE TRANSMITTER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Symbol Min. Typ. Max. Units Condition Supply Voltage Vcc-VEE 4.75 5.0 5.25 V Note 1 Supply Current Icc - 100 - mA Note 2 HI Vih Vcc-1.17 Vcc-0.73 V Note 3 LO Vil Vcc-1.95 Vcc-1.45 V Note 3 Input Voltage, TD, TD Laser Bias Monitor Diff. Voltage 0.2 V Note 3 Rear Face Monitor Diff. Voltage 0.08 V Note 3 V Note 4 Transmitter Disable HI Vcc-1 Vcc 155Mbps STM-1 Tx/Rx Optical Module LO VEE VEE+0.8 V Note: 1. If Vcc-GND, then Vcc=-4.75 to -5.25V. If VEE=GND, then Vcc=4.75 to 5.25V 2. Input bias current is not included in Supply Current. 50% duty cycle data pattern at 155.52Mb/s 3. Vcc-VEE=5V, Tc=25oC 4. The transmitter is normally disable and only requires an external voltage to enable. RECEIVER Tc= 0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Supply Voltage Supply Current Symbol Vcc Icc Min. 4.75 Typ. 5.0 100 Max. 5.25 Unit V mA Output Voltage HI Voh Vcc-1.03 Vcc-0.88 V DATA & /DATA LO Vol Vcc-1.81 Vcc-1.62 V HI Voh Vcc-1.03 Vcc-0.88 V LO Vol Vcc-1.81 Vcc-1.62 V FLAG & /FLAG OPTO-ELECTRICAL INTERFACE TRANSMITTER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Average Output Power Symbol Po Min. -12 Extinction Ratio Er -3 10 Eye Diagram Center Wavelength CCITT G.957 Spectral Width(RMS) Typ. Max. -8 Units dBm Condition Note 1 0 dB 1280 1310 1330 nm 1520 1550 1.5 1580 4.0 nm Typ. -3 Max. Note: 1. Measured at the bit rate of 155.52Mbps, (223-1) PRBS NRZ, 25oC RECEIVER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Overload Symbol Pmax Min. Minimum Sensitivity Pmin -35 FLAG Pd Pa -53 -52 Dessert Power Assert Power Note: 1. Measured at the bit rate of 155.52Mbps, (223-1) PRBS NRZ, 25oC PIN ASSIGNMENT (Transmitter / Receiver) -33 -32 Units dBm Condition Note 1 dBm Note 1 dBm dBm 155Mbps STM-1 Tx/Rx Optical Module Receptacle Pigtail TRANSMITTER Pin # 1 2 3 4 5 Function NC* LBM(+) NC* LBM(-) VEE RECEIVER (Standard, Pin Assignment A) Pin # 20 19 18 17 16 6 Vcc 15 7 Transmitter Disable 14 8 Vcc 13 9 Vcc 12 10 NC* 11 *NC pin is not connected to the internal circuit LBM: Laser Bias Monitor RFM: Rear Face Monitor Function NC* RFM(+) Vcc RFM(-) DATA Pin # 1 2 3 4 5 Function NC* NC* NC* NC* NC* Pin # 20 19 18 17 16 Function NC* NC* NC* NC* NC* /DATA Vee NC* Vcc NC* 6 7 8 9 10 GND DATA GND /DATA NC* 15 14 13 12 11 GND /FLAG GND FLAG Vcc (+5V) RECEIVER (with CLK, Pin Assignment B) RECEIVER (with CLK, Pin Assignment C) Pin # Function Pin # Function 1 GND 20 NC* 2 GND 19 NC* 3 GND 18 NC* 4 CLK 17 NC* 5 /CLK 16 GND 6 GND 15 GND 7 DATA 14 FLAG 8 GND 13 GND 9 /DATA 12 /FLAG 10 GND 11 Vcc(+5V) *NC pin is not connected to the internal circuit Note: CLK represents clock recovery circuit. Pin # Function Pin # 1 NC* 20 2 NC* 19 3 /CLK 18 4 GND 17 5 /CLK 16 6 GND 15 7 DATA 14 8 GND 13 9 /DATA 12 10 NC* 11 *NC pin is not connected to the internal circuit Note: CLK represents clock recovery circuit. Pigtail Package: Unit: mm Function NC* NC* NC* NC* NC* GND /FLAG GND FLAG Vcc(+5V) 155Mbps STM-1 Tx/Rx Optical Module Receptacle Package: 155Mbps STM-1 Tx/Rx Optical Module If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 622Mbps STM-4 Tx/Rx Optical Module VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1310 nm & 1550 nm STM-4 Transmitter & Receiver Modules Read Model No. TW-X-Y-Z-542 Read Model No. RW-X-Y-Z-542 TW = Transmitter 1310 nm laser (TW=T3) 1550nm laser (TW=T5) RW = Receiver Standard (RW= RA) With CLK pin B (RW=RB) X = Package Pigtail (X=P), Receptacle (X=R) X = Package Pigtail (X=P), Receptacle (X=R) Y = Connector FC:(Y = FC), SC: (Y=SC) ST: (Y=ST) Y = Connector FC:(Y = FC), SC: (Y=SC) ST: (Y=ST) Z = Output Power -3 dBm - 0 dBm (Z=1), -12dBm - 8 dBm (Z=2) Z = Sensitivity <-28 dBm (Z=1), 542 = supply voltage, data rate 5V, 622Mbps STM-4, 20 pins dual & pin number in line FEATURES Data Rate: 622Mbps, NRZ Power Supply Voltage: Single+5V Electrical Interface: Differential PECL Pin-Configuration: 20pins Dual in Line Connector Interface: FC/PC 542 = supply voltage, data rate 5V, 622Mbps STM-4, 20 pins dual in & pin number line APPLICATIONS ATM/SONET OC-12/SDH STM-4 Active Star Network Point to Point Links Fiber size: 9/125m ELECTRICAL INTERFACE TRANSMITTER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Symbol Min. Typ. Max. Units Condition Supply Voltage Vcc-VEE 4.75 5.0 5.25 V Note 1 Supply Current Icc - 200 300 mA Note 2 Input Voltage, TD, TD HI Vih Vcc-1.17 Vcc-0.73 V Note 3 LO Vil Vcc-1.95 Vcc-1.45 V Note 3 V Note 3 Laser Bias Monitor Diff. Voltage 0.2 Rear Face Monitor Diff. Voltage Transmitter Disable V Note 3 HI Vcc-1 0.08 Vcc V Note 4 LO VEE VEE+0.8 V 622Mbps STM-4 Tx/Rx Optical Module Note: 1. If Vcc-GND, then Vcc=-4.75 to -5.25V. If VEE=GND, then Vcc=4.75 to 5.25V 2. Input bias current is not included in Supply Current. 50% duty cycle data pattern at 622.08Mb/s 3. Vcc-VEE=5V, Tc=25oC 4. The transmitter is normally disable and only requires an external voltage to enable. RECEIVER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Supply Voltage Supply Current Symbol Vcc Icc Min. 4.75 Typ. 5.0 Max. 5.25 150 Unit V mA Output Voltage HI Voh Vcc-1.03 Vcc-0.88 V DATA & /DATA LO Vol Vcc-1.81 Vcc-1.62 V HI Voh Vcc-1.03 Vcc V LO Vol 0 0.5 V FLAG & /FLAG OPTO-ELECTRICAL INTERFACE TRANSMITTER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Average Output Power Symbol Po Extinction Ratio Er Eye Diagram Center Wavelength Min. -12 -3 8.2 Typ. Max. -8 0 Units dBm 1280 1310 1330 nm 1520 1550 1.5 1580 4.0 nm Typ. -3 Max. Condition Note 1 dB CCITT G.957 Spectral Width(RMS) Note: 1. Measured at the bit rate of 622.08Mbps, (223-1) PRBS NRZ, 25oC RECEIVER Tc=0 to 70oC, Vcc-VEE = 4.75 to 5.25V unless otherwise specified Parameter Overload Minimum Sensitivity FLAG Dessert Power Assert Power Symbol Pmax Min. Pmin -28 Pd Pa -42 -52 Note: 1. Measured at the bit rate of 622.08Mbps, (223-1) PRBS NRZ, 25oC PIN ASSIGNMENT (Transmitter / Receiver) -32 -28.5 Units dBm Condition Note 1 dBm Note 1 dBm dBm 622Mbps STM-4 Tx/Rx Optical Module Receptacle Package Pigtail Package TRANSMITTER Pin # 1 2 3 4 5 Function NC* LBM(+) NC* LBM(-) VEE RECEIVER (Standard, Pin assignment A) Pin # 20 19 18 17 16 6 Vcc 15 7 Transmitter Disable 14 8 Vcc 13 9 Vcc 12 10 NC* 11 *NC pin is not connected to the internal circuit LBM: Laser Bias Monitor RFM: Rear Face Monitor Function NC* RFM(+) Vcc RFM(-) DATA Pin # 1 2 3 4 5 Function NC* NC* NC* NC* NC* Pin # 20 19 18 17 16 Function NC* NC* NC* NC* NC* /DATA Vee NC* Vcc NC* 6 7 8 9 10 Ground DATA Ground /DATA NC* 15 14 13 12 11 Ground /FLAG Ground FLAG Vcc (+5V) RECEIVER (WITH CLK, Pin assignment B) Pin # Function Pin # 1 GND 20 2 GND 19 3 GND 18 4 CLOCK 17 5 /CLOCK 16 6 GND 15 7 DATA 14 8 GND 13 9 /DATA 12 10 GND 11 *NC pin is not connected to the internal circuit Note: CLK represents clock recovery circuit. Function NC* NC* NC* NC* GND GND FLAG GND /FLAG Vcc(+5V) 622Mbps STM-4 Tx/Rx Optical Module Dimensions: Unit: mm Pigtail Package: Receptacle Package: 622Mbps STM-4 Tx/Rx Optical Module If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | How To Order VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | HOW TO ORDER 1. Order Methods 2. Terms & Conditions 3. Order Form 1. Order Methods By Telephone: 909-718-0999 Our friendly sales representatives are available to serve you from 8:30 a.m. to 5:30 p.m. Pacific Time, Monday through Friday. For the most efficient service, please have a list of quantities and part numbers; also, if paying by credit card, have your Master Card, VISA, American Express, American Express Corporate Purchasing convenient prior to calling. We also extend Net 30 Day accounts to qualified institutions and companies. Please ask our sales representative for a credit application and fill out and fax it to Lasermate Corporation at FAX: (909)718-0998. By FAX: 909-718-0998 Our FAX line is available 24 hours a day, 7 days a week, 365 days a year. Please, include your daytime telephone number, e-mail or fax number in case further information is required to process your order. By Internet: www.lasermate.com Internet ordering is available 24 hours a day, 7 days a week, 365 days a year by using the order form. For your safety, please fill out and fax the order form to Lasermate at fax: (909)718-0998. How To Order Please include your daytime telephone number, e-mail or fax number to allow Lasermate's sales staff to contact you if there should be any concerns regarding your order. By Mail: Simply Mail Your Order To: Lasermate Corporation 20264 E. Carrey Road Walnut, CA 91789 USA International Orders: In addition to the United States and its territories, Lasermate Corporation also accepts orders from other countries. All orders of international origin are exported from the U.S. in accordance with the Export Administration Regulations. Diversion contrary to U.S. Law is prohibited. Lasermate Corporation will accept Telegraph Transfer in advance, international money order, and credit card. Please contact us for banking information for wire transfer. Special Orders: Lasermate Corporation also takes special orders, such as a prototype sample, from customers. The 50% deposit is requested and nonrefundable. 2. Terms and Conditions Payment: Several convenient payment options are available: Check, Money Order, Master Card, VISA & American Express. We also extend credit to qualified institutions and companies. A credit application can be obtained by calling (909)-718-0999 and talking to any sales representative. When opening an account with us, please allow sufficient time to complete the approval process. FOB Point: FOB point is Walnut, CA, USA. Shipping Charges: Shipping charges are the responsibility of the customer on all shipments. Any disputed shipping charges billed to a customer account or consignee billing, will be charged back to the customer by Lasermate Corporation. Sales Tax: Only California residents need to remit 8.25% sales tax. Lasermate Corporation does not remit sales tax to states other than California. How To Order Return Policy: In order to facilitate our return processing: Please contact a Customer Service Representative to obtain an RMA (Returned Merchandise Authorization) number prior to returning product. All returns should be made within 30 days of date of invoice and be accompanied by the original invoice number and a brief explanation of the reason for the return. Return freight charge must be prepaid. Sorry, C.O.D. returns cannot be accepted. Return merchandise in original packaging and in resalable condition. Parts returned due to customer error will be subject to a 15% restocking charge. "Not-In-Catalog Items and The Special Order Items" are not returnable. This return policy may be altered for special circumstances and would require prior approval from Lasermate Corporation. Dishonored Check Policy: If a check you give us for payment is dishonored for any reason by the bank or other institution on which it is drawn, you agree to pay Lasermate Corporation $20.00 as a service charge. Prices/Quantities: Prices are subject to change without notice and quantities may be limited. Warranty: Lasermate Corporation's sole obligation for products that prove to be defective within 60 days of purchase will be for replacement or repair. Lasermate Corporation gives no warranty either expressed or implied and specifically disclaims all other warranties, including warranties for merchantability and fitness. In no event shall Lasermate Corporation's liability exceed the buyer's purchase price, nor shall Lasermate Corporation be liable for any indirect or consequential damages. This warranty does not apply to products which have been subject to misuse (including static discharge), neglect, accident or modification, or which have been soldered or altered during assembly and are not capable of being tested. DO NOT USE PRODUCTS SOLD BY LASERMATE CORPORATION AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS! Products sold by Lasermate Corporation are not authorized for use as critical components in life support devices or systems. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 3. Order Form How To Order If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | HOW TO ORDER | QUO & INFO REQUEST | Foods for Brain Book Store Foods for Brain Book Store LASER Section A: General Interests LASER Section B: Special Interests LASER Section C: References LASER Section A: General Interests Click on title for more details and ORDER. Understanding Lasers : An Entry-Level Guide; Jeff Hecht; Paperback; $44.95; Descriptive information available. How Did We Find Out About Lasers? (The 'How Did We Find Out-? Series); Isaac Asimov, Eriks Kors; Hardcover; $11.65; Descriptive information available. Introduction to Lasers and Their Applications; Donald C. O'Shea; Hardcover; $51.75 Laser Experiments for Beginners; Bertrand H. Spencer, et al; Paperback; $28.00 Laser Fundamentals; William T. Silfvast; Hardcover; $95.00; Descriptive information available. Laser Fundamentals; William T. Silfvast; Paperback; $39.95 Lasers; Lynn Myring; Paperback; $6.25 Lasers : Invention to Application; Jesse H. Ausubel, John R. Whinnery; Paperback; $13.45 Lasers : The New Technology of Light (Facts on File Science Sourcebooks); Charlene Billings; Hardcover; $17.95; Descriptive information available. Lasers : Theory and Practice (Prentice-Hall International Series in Optoelectronics); John Hawkes, et al; Paperback; $39.00 Lasers and Electro-Optics : Fundamentals and Engineering; Christopher C. Davis; Paperback; $44.95 Lasers and Holography : An Introduction to Coherent Optics; Winston E. Kock; Paperback; $5.35 The Laser Cookbook : 88 Practical Projects; Gordon McComb; Paperback; $22.46 The Laser Guidebook (Optical and Electro-Optical Engineering Series); Jeff Hecht; Paperback; $31.50 Build Your Own Laser, Phaser, Ion Ray Gun & Other Working Space-Age Projects; Robert Iannini; Paperback; $19.76 Build Your Own Working Fiberoptic Infrared, and Laser Space-Age Projects; Robert E. Iannini; Foods for Brain Book Store Paperback; $17.96 Build Your Own Laser, Phaser, Ion Ray Gun & Other Working Space-Age Projects; Paperback (Special Order) Build Your Own Working Fiberoptic Infrared, and Laser Space-Age Projects; Paperback (Special Order) The Laser in America, 1950-1970; Joan Lisa Bromberg; Hardcover; $35.00 Amazing Light : A Volume Dedicated to Charles Hard Townes on His 80th Birthday; Raymond Y. Chiao; Hardcover; $69.00 LASER Section B: Special Interests Click on title for more details and ORDER. Applications of Laser Techniques to Fluid Mechanics; Hardcover (Special Order) Applications of Lasers and Laser Systems; David Beach, et al; Hardcover; $54.00 (Special Order) Applications of Lasers to Industrial Chemistry (Proceedings of Spie-The International Optical Engineering Vol 458); Richard L. Woodin, Andrew Kaldor; Paperback (Publisher Out Of Stock) Applications of the Laser; Leon Goldman; Hardcover; $56.70 (Special Order) Applications of the Laser; Hardcover (Special Order) Applied Laser Tooling; O.D.D. Soares, M. Perez-Amor; Hardcover; $96.00 (Special Order) Course VIII : Laser Applications (Laser/Electro-Optics Technology Series); Paperback; $33.00 (Special Order) Crystalline Lasers : Physical Processes and Operating Schemes (Laser Science and Technology Series); Aleksandr Aleksandrovich Kaminskii, Alexander A. Kaminskii; Hardcover; $110.00 Erbium-Doped Fiber Amplifiers : Principles and Applications; Emmanuel Desurvire; Hardcover; $125.00 Laser and Eye Safety in the Laboratory; Gabe Garcia, Larryl Matthews; Paperback; $34.95 Laser-Molecule Interaction : Laser Physics and Molecular Nonlinear Optics; A. Ducasse, et al; Hardcover; $59.95 Lasers; Joseph H. Eberly, Peter W. Milonni; Hardcover; $94.95 Optical Fiber Amplifiers : Design and System Applications (The Artech House Optoelectronics Library); Anders Bjarklev; Hardcover; $89.00 Foods for Brain Book Store Pulsed Laser Deposition of Thin Films; Graham K. Hubler, Douglas B. Chrisey; Hardcover; $99.95 Reliability and Degradation of Semiconductor Lasers and Leds; Mitsuo Fukuda; Hardcover; $89.00 Solid-State Laser Engineering (Springer Series in Optical Sciences, Vol 1) Vol 1; Walter Koechner; Hardcover; $79.50; Descriptive information available. Spontaneous Emission and Laser Oscillation in Microcavities (The CRC Press Laser Nad Optical Science and Technology); Hiroyuki Yokoyama, Kikuo Ujihara; Hardcover; $200.00 Ultraviolet Laser Technology and Applications; David Elliott; Hardcover; $49.95 Analytical Applications of Lasers (Chemical Analysis, Vol 87); Edward H. Piepmeier; Hardcover; $110.00 (Special Order) Basics of Laser Material Processing; Alexander G. Grigoryants; Hardcover; $105.00 (Special Order) Beam Diagnostics and Beam Handling Systems (Spie Proceedings Volume1024); Alberto Sona; Paperback; $45.00 (Special Order) Beam Technologies for Integrated Processing; Paperback; $19.00 (Special Order) Beam-Wave Interaction in Periodic and Quasi-Periodic Structures (Accelerator Physics); Levi Schachter; Hardcover; $99.50 (Back Ordered) CO2 Lasers and Applications 17-18 January 1989 Los Angeles, California (Spie Proceedings, Vol 1042); James D. Evans, Edward V. Locke; Paperback; $38.00 (Special Order) Coherence Phenomena in Atoms and Molecules in Laser Fields (NATO Asi Series B, Physics, Vol 287); Andre D. Bandrauk, Stephen C. Wallace; Hardcover; $120.00 (Special Order) Coherent Quantum Optics and Technology (Adop Advances in Optoelectronics, No 6); Motoichi Ohtsu; Hardcover; $125.00 (Special Order) Cohesive Properties of Semiconductors Under Laser Irradiation; Lucien D. Laude; Hardcover; $127.00 (Special Order) Compact Sources of Ultrashort Pulses (Cambridge Studies in Modern Optics); Irl N. Duling; Hardcover; $79.95 (Special Order) Diode Lasers (Professional Advancement Course, No 405); William Streifer; Paperback; $30.00 (Special Order) Dye Laser Principles : With Applications (Quantum Electronics Principles and Applications); F.J. Duarte, Hillman Lloyd W.; Hardcover; $87.00 (Special Order) Dynamics of Lasers; Hardcover (Special Order) Dynamics of Lasers (Nonlinear Systems); C.O. Weiss, R. Vilaseca; Hardcover; $130.00 (Special Order) Foods for Brain Book Store Dynamics of Non-Linear Optical Systems; L. Pesquera, F.J. Bermejo; Hardcover; $74.00 (Special Order) Course 6 : Laser and Electro-Optic Components (Laser/Electro-Optics Technology Series); Hardcover; $35.00 (Special Order) Engineering Applications of Laser Velocimetry; H. W. Coleman; Paperback; $40.00 (Special Order) Engineering Applications of Lasers and Holography; Winston E. Kock; Hardcover (Publisher Out Of Stock) Engineering Uses of Coherent Optics; E.R. Robertson; Hardcover; $150.00 (Special Order) Evaluation and Installation of Surgical Laser Systems; David B. Apfelberg; Hardcover; $99.00 (Special Order) LASER Section C: References Click on title for more details and ORDER. CRC Handbook of Laser Science and Technology : Lasers and Masers Vol 1; Marvin J. Weber; Hardcover; $185.95 (Special Order); Descriptive information available. CRC Handbook of Laser Science and Technology : Optical Materials (CRC Handbook of Laser Science and Technology, Supplement 2); Marvin J. Weber; Hardcover; $225.00 (Special Order); Descriptive information available. CRC Handbook of Laser Science and Technology : Optical Materials Part 3, Applications, Coatings, and Fabrication Vol 5; Marvin J. Weber; Hardcover; $201.00 (Special Order); Descriptive information available. CRC Handbook of Laser Science and Technology : Optical Materials, Part 2 : Properties Vol 4; Marvin J. Weber; Hardcover (Publisher Out Of Stock); Descriptive information available. CRC Handbook of Laser Science and Technology : Supplement 1 : Lasers; Marvin J. Weber; Hardcover; $225.00 (Special Order) Encyclopedia of Lasers and Optical Technology; Robert Meyers; Hardcover; $97.00 (Special Order) Go to Author, Title, Subject Search now. | Search | Browse | Return to Lasermate Corporation Home Page Foods for Brain Book Store Foods for Brain Book Store ELECTRONICS Section A: General Interests ELECTRONICS Section B: Special Interests ELECTRONICS Section C: References ELECTRONICS Section A: General Interests Click on title for more details and ORDER. Analogue and Digital Electronics for Engineers: An Introduction; H. Ahmed; Paperback; $29.66 The Art of Electronics; Paul Horowitz, Winfield Hill; Hardcover; $64.95; Descriptive information available. Basic Electronics; Paul B. Zbar; Paperback; $27.17 Basic Electricity and Electronics; Charles A. Schuler, Richard J. Fowler; Hardcover; $66.95 Basic Electronics; Paperback; $11.65 Basic Electronics : A Text-Lab Manual; Paul B. Zbar, Albert P. Malvino; Paperback; $37.95 Basic Electronics Course (Tab Hobby Electronics Series); Norman H. Crowhurst, Norman H. Croehurst; Paperback; $17.96 Basic Electronics Theory/With Projects & Experiments; Delton T. Horn; Paperback; $24.26; Descriptive information available. Bebop to the Boolean Boogie : An Unconventional Guide to Electronics Fundamentals, Components, and Processes; Clive Maxfield; Paperback; $31.50 Beginner's Guide to Reading Schematics; Robert J. Traister, Anna L. Lisk; Paperback; $13.45 Electricity & Electronics; Thomas E. Newman; Hardcover; $59.95 Electricity and Basic Electronics; Stephen R. Matt; Hardcover; $34.00 Electricity and Electronics; Howard H. Gerrish, William E. Dugger; Hardcover; $35.96; Descriptive information available. Electricity and Electronics Fundamentals Vol 1; Frank D. Petruzella; Paperback; $31.95 Electronic Principles; Albert Paul, Ph.D. Malvino; Hardcover; $72.95 Electronics : A Self Teaching Guide; Harry Kybett; Paperback; $17.96 Foods for Brain Book Store Foundations of Electronics; Russell L. Meade; Hardcover; $74.95 Foundations of Electronics : Circuits and Devices; Russell L. Meade; Hardcover; $84.95 ELECTRONICS Section B: Special Interests Click on title for more details and ORDER. Applied Electronic Devices and Analog Ics; J. Michael McMenamin; Hardcover; $75.95 Analog and Digital Electronics : A First Course; Peter H. Beards; Hardcover; $84.00 Analog and Switching Circuit Design : Using Integrated and Discrete Devices; J. Watson; Hardcover; $142.00 Analog AutomaticControl Loops in Radar and Ew (Artech House Communication and Electronic Defense Library); Richard Smith Hughes; Hardcover; $72.00 Analog Electronics : An Integrated Pspice Approach; T. E. Price; Paperback; $60.00 Analysis and Design of Digital Integrated Circuits (McGraw Hill Series in Electrical Engineering/Electronics and Electronic Circuits); David A. Hodges, Horace G. Jackson; Hardcover; $72.80 Build Your Own Laser, Phaser, Ion Ray Gun & Other Working Space-Age Projects; Robert E. Iannini; Paperback; $19.76 Cmos Digital Integrated Circuits : Analysis and Design; Sung-Mo Kang, Yusuf Leblebici; Hardcover; $64.70 Communication Electronics (Basic Skills in Electricity and Electronics); Louis E. Frenzel; Hardcover; $54.95 Digital System Design; Barry Wilkinson; Paperback; $61.00 Digital Technology : Principles and Practice; Virendra Kumar; Hardcover; $55.50 Electronics in Industry; George M. Chute, R.D. Chute; Hardcover; $70.50 Electronics Math; Bill R. Deem; Hardcover; $68.00 Electronics Mathematics; Robert L. Donovan; Hardcover; $76.00 Electricity and Electronics Fundamentals, Book 2 Vol 2; Frank D. Petruzella; Paperback; $34.50 Electromechanical Engineering : An Introduction; Charles Fraser, John Milne; Hardcover; $59.95 Foods for Brain Book Store Electronic AIDS to Navigation : Radar and Arpa; Roger Lownsborough, David Calcutt; Paperback; $46.50 Electronic and Computer-Aided Astronomy : From Eyes to Electronic Sensors (Ellis Horwood Library of Space Science and Space Technology); Ian S. McLean; Hardcover; $65.50 Electronic Communication; Robert L. Shrader; Hardcover; $70.95 Electronic Components : A Complete Reference for Project Builders; Delton T. Horn; Paperback; $19.76 The Electronics Problem Solver; Paperback; $29.95 Electronics Projects for Young Scientists (Projects for Young Scientists); George Delucenay Leon; School & Library Binding; $19.80; Descriptive information available. Electronics : Circuits and Devices; Ralph Judson Smith; Hardcover; $82.38 Electronics : Circuits, Amplifiers and Gates; D. V. Bugg; Paperback; $37.00 Electronics for Electricians and Engineers; Ian R. Sinclair; Paperback; $18.95 Electronics for Student Engineers; Bruce Newby; Paperback; $24.95 Engineering Electronics : A Practical Approach; Robert Mauro; Hardcover; $81.00 Electronics Technology : Devices and Circuits; William E., Jr. Dugger, Howard H. Gerrish; Hardcover; $39.96 Electronics Theory and Practice; Gerardo Mesias; Paperback; $32.95 Richard H. Bube; Hardcover; $73.00; Descriptive information available. Practical Digital Electronics for Technicians; Will Kimber; Paperback; $27.95 Practical Electricity; Nigel P. Cook; Hardcover; $59.00 Practical Electronics; Nigel P. Cook; Hardcover; $59.00 ELECTRONICS Section C: References Click on title for more details and ORDER. Electronics Engineers' Handbook; Donald Christiansen; Hardcover; $110.50; Descriptive information available. Electronics Engineers' Handbook; Donald G. Fink, Donald Christiansen; Hardcover; $110.00; Descriptive information available. Foods for Brain Book Store Electronics Equations Handbook; Stephen J. Erst; Paperback; $17.96 Electronics Pocket Handbook; Daniel L. Metzger; Paperback; $16.16 Electronics Pocket Reference; Edward Pasahow; Paperback; $22.46; Descriptive information available. Encyclopedia of Electronics; Stan Gibilisco, Neil J. Sclater; Hardcover; $62.55 Handbook of Electronics Calculations : For Engineers and Technicians; Milton Kaufman, Arthur H. Seidman; Hardcover; $49.50 Handbook of Electronics Formulas, Symbols and Definitions; John R. Brand; Hardcover; $43.95; Descriptive information available. Handbook of Electronics Tables and Formulas; Paperback; $22.46; Descriptive information available. Modern Dictionary of Electronics; Rudolf F. Graf; Paperback; $49.95; Descriptive information available. Modern Electronics Guidebook : An Overview; Michael N. Kozicki; Hardcover; $43.95 Go to Author, Title, Subject Search now. | Search | Browse | Return to Lasermate Corporation Home Page Subject: electronics Date: Wed, 5 Mar 1997 18:50:34 -0800 From: wclin@ucla.edu (Wun-Chen Lin) To: paul@lasermate.com Foods for Brain Book Store ELECTRONICS Section A: General Interests ELECTRONICS Section B: Special Interests ELECTRONICS Section C: References ELECTRONICS Section A: General Interests Click on title for more details and ORDER. The Art of Electronics; Paul Horowitz, Winfield Hill; Hardcover; $64.95; Descriptive information available. Basic Electronics; Paul B. Zbar; Paperback; $27.17 Foods for Brain Book Store Basic Electricity and Electronics; Charles A. Schuler, Richard J. Fowler; Hardcover; $66.95 Analogue and Digital Electronics for Engineers: An Introduction; H. Ahmed; Paperback; $29.66 Basic Electronics; Paperback; $11.65 Basic Electronics : A Text-Lab Manual; Paul B. Zbar, Albert P. Malvino; Paperback; $37.95 Basic Electronics Course (Tab Hobby Electronics Series); Norman H. Crowhurst, Norman H. Croehurst; Paperback; $17.96 Basic Electronics Theory/With Projects & Experiments; Delton T. Horn; Paperback; $24.26; Descriptive information available. Bebop to the Boolean Boogie : An Unconventional Guide to Electronics Fundamentals, Components, and Processes; Clive Maxfield; Paperback; $31.50 Beginner's Guide to Reading Schematics; Robert J. Traister, Anna L. Lisk; Paperback; $13.45 Electricity & Electronics; Thomas E. Newman; Hardcover; $59.95 Electricity and Basic Electronics; Stephen R. Matt; Hardcover; $34.00 Electricity and Electronics; Howard H. Gerrish, William E. Dugger; Hardcover; $35.96; Descriptive information available. Electricity and Electronics Fundamentals Vol 1; Frank D. Petruzella; Paperback; $31.95 Electronic Principles; Albert Paul, Ph.D. Malvino; Hardcover; $72.95 Electronics : A Self Teaching Guide; Harry Kybett; Paperback; $17.96 ELECTRONICS Section B: Special Interests Click on title for more details and ORDER. Applied Electronic Devices and Analog Ics; J. Michael McMenamin; Hardcover; $75.95 Analog and Digital Electronics : A First Course; Peter H. Beards; Hardcover; $84.00 Analog and Switching Circuit Design : Using Integrated and Discrete Devices; J. Watson; Hardcover; $142.00 Analog Automatic Control Loops in Radar and Ew (Artech House Communication and Electronic Defense Library); Richard Smith Hughes; Hardcover; $72.00 Analog Electronics : An Integrated Pspice Approach; T. E. Price; Paperback; $60.00 Foods for Brain Book Store Analysis and Design of Digital Integrated Circuits (McGraw Hill Series in Electrical Engineering/Electronics and Electronic Circuits); David A. Hodges, Horace G. Jackson; Hardcover; $72.80 Basic Mathematics for Electricity and Electronics; Build Your Own Laser, Phaser, Ion Ray Gun & Other Working Space-Age Projects; Robert E. Iannini; Paperback; $19.76 Cmos Digital Integrated Circuits : Analysis and Design; Sung-Mo Kang, Yusuf Leblebici; Hardcover; $64.70 Communication Electronics (Basic Skills in Electricity and Electronics); Louis E. Frenzel; Hardcover; $54.95 Digital System Design; Barry Wilkinson; Paperback; $61.00 Digital Technology : Principles and Practice; Virendra Kumar; Hardcover; $55.50 Electronics in Industry; George M. Chute, R.D. Chute; Hardcover; $70.50 Electronics Math; Bill R. Deem; Hardcover; $68.00 Electronics Mathematics; Robert L. Donovan; Hardcover; $76.00 Electricity and Electronics Fundamentals, Book 2 Vol 2; Frank D. Petruzella; Paperback; $34.50 Electromechanical Engineering : An Introduction; Charles Fraser, John Milne; Hardcover; $59.95 Electronic AIDS to Navigation : Radar and Arpa; Roger Lownsborough, David Calcutt; Paperback; $46.50 Electronic and Computer-Aided Astronomy : From Eyes to Electronic Sensors (Ellis Horwood Library of Space Science and Space Technology); Ian S. McLean; Hardcover; $65.50 Electronic Communication; Robert L. Shrader; Hardcover; $70.95 Electronic Components : A Complete Reference for Project Builders; Delton T. Horn; Paperback; $19.76 The Electronics Problem Solver; Paperback; $29.95 Electronics Projects for Young Scientists (Projects for Young Scientists); George Delucenay Leon; School & Library Binding; $19.80; Descriptive information available. Electronics : A Survey of Electrical Engineering Principles; Robert Boylestad, Louis Nashelsky; Hardcover; $71.00; Descriptive information available. Electronics : Circuits and Devices; Ralph Judson Smith; Hardcover; $82.38 Electronics : Circuits, Amplifiers and Gates; D. V. Bugg; Paperback; $37.00 Electronics for Electricians and Engineers; Ian R. Sinclair; Paperback; $18.95 Foods for Brain Book Store Electronics for Student Engineers; Bruce Newby; Paperback; $24.95 Engineering Electronics : A Practical Approach; Robert Mauro; Hardcover; $81.00 Electronics Technology : Devices and Circuits; William E., Jr. Dugger, Howard H. Gerrish; Hardcover; $39.96 Electronics Theory and Practice; Gerardo Mesias; Paperback; $32.95 Richard H. Bube; Hardcover; $73.00; Descriptive information available. Foundations of Electronics; Russell L. Meade; Hardcover; $74.95 Foundations of Electronics : Circuits and Devices; Russell L. Meade; Hardcover; $84.95 Practical Digital Electronics for Technicians; Will Kimber; Paperback; $27.95 Practical Electricity; Nigel P. Cook; Hardcover; $59.00 Practical Electronics; Nigel P. Cook; Hardcover; $59.00 ELECTRONICS Section C: References Click on title for more details and ORDER. Electronics Engineers' Handbook; Donald Christiansen; Hardcover; $110.50; Descriptive information available. Electronics Engineers' Handbook; Donald G. Fink, Donald Christiansen; Hardcover; $110.00; Descriptive information available. Electronics Equations Handbook; Stephen J. Erst; Paperback; $17.96 Electronics Pocket Handbook; Daniel L. Metzger; Paperback; $16.16 Electronics Pocket Reference; Edward Pasahow; Paperback; $22.46; Descriptive information available. Encyclopedia of Electronics; Stan Gibilisco, Neil J. Sclater; Hardcover; $62.55 Handbook of Electronics Calculations : For Engineers and Technicians; Milton Kaufman, Arthur H. Seidman; Hardcover; $49.50 Handbook of Electronics Formulas, Symbols and Definitions; John R. Brand; Hardcover; $43.95; Descriptive information available. Handbook of Electronics Tables and Formulas; Paperback; $22.46; Descriptive information available. Foods for Brain Book Store Modern Dictionary of Electronics; Rudolf F. Graf; Paperback; $49.95; Descriptive information available. Modern Electronics Guidebook : An Overview; Michael N. Kozicki; Hardcover; $43.95 Go to Author, Title, Subject Search now. | Search | Browse | Return to Lasermate Corporation Home Page Fast Ethernet Foods for Brain Book Store FAST ETHERNET Click on title for more details and ORDER. Fast Ethernet ~ Usually ships in 24 hours Liam B. Quinn, Richard G. Russell / Paperback / Published 1997 Our Price: $29.71 ~ You Save: $5.24 (15%) Fast Ethernet Implementation and Migration Solutions (McGraw-Hill Series on Computer Communications) ~ Usually ships in 24 hours Martin Nemzow / Hardcover / Published 1997 Our Price: $40.00 Fast Ethernet: Dawn of a New Network ~ Usually ships in 2-3 days Howard W. Johnson / Textbook Binding / Published 1995 Our Price: $64.00 PC Week Switched and Fast Ethernet ~ Usually ships in 24 hours Robert A. Breyer / Paperback / Published 1996 Our Price: $33.99 ~ You Save: $6.00 (15%) Switched, Fast, and Gigabit Ethernet (Mtp Network Engineering Series) ~ Usually ships in 24 hours Sean Riley, Robert A. Breyer / Hardcover / Published 1999 Our Price: $50.00 Enterprise Networking With Fast Ethernet and Atm W. David Schwaderer, et al / Paperback / Published 1997 Our Price: $29.95 (Special Order) High Speed Networking With Fast Ethernet Buddy Shipley Switched and Fast Ethernet : How It Works and How to Use It Robert Breyer, Sean Riley Go to Author, Title, Subject Search now. | Search|Browse| Fast Ethernet Return to Lasermate Corporation Home Page Foods for Brain Book Store ATM (Asynchronous Transfer Mode) Click on title for more details and ORDER. ATM For Dummies(R) ~ Usually ships in 24 hours Cathy Gadecki(Contributor), et al / Paperback / Published 1997 Our Price: $19.99 ~ You Save: $5.00 (20%) Advances in Transport Network Technology : Photonic Networks, Atm, and Sdh (Artech House Telecommunications Library) ~ Usually ships in 24 hours Ken-Ichi Sato / Hardcover / Published 1997 Our Price: $83.00 Asynchronous Transfer Mode (Atm) : Technical Overview ~ Usually ships in 24 hours Harry J. R. Dutton, Peter Lenhard (Contributor) / Paperback / Published 1995 Our Price: $66.00 Asynchronous Transfer Mode : Atm Archtecture and Implementation James Martin, et al / Paperback / Published 1996 Our Price: $51.62 ATM & MPEG-2: Integrating Digital Video Into Broadband Networks ~ Usually ships in 24 hours Michael Orzessek(Contributor), Peter Sommer / Textbook Binding / Published 1997 Our Price: $63.00 Atm : Internetworking With Atm (Prentice Hall Series in Advanced Communications Technologies) ~ Usually ships in 24 hours Uyless D. Black / Hardcover / Published 1997 Our Price: $61.00 Atm : Signaling in Broadband Networks ~ Usually ships in 24 hours Uyless D. Black / Hardcover / Published 1997 Our Price: $74.00 Atm : Solutions for Enterprise Internetworking ~ Usually ships in 24 hours David Ginsburg / Hardcover / Published 1996 Our Price: $42.19 Atm : Solutions for Enterprise Internetworking (Data Communications and Networks Series) ~ Usually ships in 24 hours David Ginsburg / Hardcover / Published 1998 Our Price: $46.88 Atm and Multiprotocol Networking (Computer Communications) ~ Usually ships in 24 hours George C. Sackett, Christopher Metz (Contributor) / Paperback / Published 1997 Our Price: $55.00 Atm for Public Networks ~ Usually ships in 24 hours Ronald H. Davis / Hardcover / Published 1999 Our Price: $59.95 The Atm Forum Anchorage Accord : The Official Interoperability Specification ~ Usually ships in 2-3 days Software / Published 1997 Our Price: $99.50 ATM Network Resource Management (McGraw-Hill Computer Communications Series) ~ Usually ships in 2-3 days Zbigniew Dziong / Paperback / Published 1997 Our Price: $60.00 Atm Networks : Concepts, Protocols, Applications ~ Usually ships in 24 hours Rainer Handel, et al / Hardcover / Published 1998 Our Price: $52.50 Atm Networks : Concepts, Protocols, Applications (Electronic Systems Engineering Series) ~ Usually ships in 2-3 days Rainer Handel, et al / Hardcover / Published 1994 Our Price: $49.69 ATM Networks: Principles and Use ~ Usually ships in 2-3 days Martin P. Clark / Paperback / Published 1996 Our Price: $74.95 ATM Resource Library ~ Usually ships in 2-3 days Uyless D. Black / Paperback / Published 1999 Our Price: $149.99 Atm Resource Library ~ Usually ships in 24 hours Virginia Front Royal, Uyless D. Black / Hardcover / Published 1998 Our Price: $149.99 Atm Switches (Artech House Telecommunications Library) ~ Usually ships in 2-3 days Edwin R. Coover / Hardcover / Published 1997 Our Price: $87.00 Atm Switching Systems (Artech House Telecommunications Library) ~ Usually ships in 2-3 days Thomas M. Chen, Stephen S. Liu (Contributor) / Hardcover / Published 1995 Our Price: $83.00 Atm Technology : An Introduction ~ Usually ships in 2-3 days Marc Boisseau, et al / Paperback / Published 1996 Our Price: $29.95 Atm Transport and Network Integrity (Series in Telecommunications) ~ Usually ships in 2-3 days Tsong-Ho Wu(Editor), Noriaki Yoshikai (Editor) / Hardcover / Published 1997 Our Price: $59.95 ATM User Network Interface (UNI) Specification Version 3.1 ~ Usually ships in 24 hours Atm Forum Technical Committee / Textbook Binding / Published 1995 Our Price: $48.36 ~ You Save: $7.64 (14%) ATM Volume I: Foundation for Broadband Networks ~ Usually ships in 24 hours Uyless D. Black / Textbook Binding / Published 1998 Our Price: $60.00 ATM Volume I: Foundation for Broadband Networks ~ Usually ships in 24 hours Uyless D. Black, Ulysses D. Black / Textbook Binding / Published 1995 Our Price: $63.00 ATM: Asynchronous Transfer Mode User's Guide ~ Usually ships in 24 hours William A. Flanagan / Paperback / Published 1993 Our Price: $39.95 ATM: The New Paradigm for Internet, Intranet, and Residential Broadband Network Services and Applications ~ Usually ships in 24 hours Timothy Kwok / Textbook Binding / Published 1997 Our Price: $63.00 Broadband Networking : Atm, Sdh, and Sonet (Artech House Telecommunications Library) ~ Usually ships in 24 hours Mike Sexton, Andy Reid (Contributor) / Hardcover / Published 1998 Our Price: $99.00 Cisco Switched Internetworks : Vlans, Atm & Voice/Data Integration (Cisco Technical Expert) ~ Usually ships in 24 hours Chris Lewis / Paperback / Published 1999 Our Price: $44.00 ~ You Save: $11.00 (20%) Client/Server over Atm : Making Use of Broadband to Support Client/Server Applications ~ Usually ships in 2-3 days Daniel Minoli, et al / Hardcover / Published 1997 Our Price: $49.00 Delivering Voice over Frame Relay and Atm ~ Usually ships in 24 hours Dan Minoli, et al / Hardcover / Published 1998 Our Price: $59.99 Demystifying ATM/ADSL ~ Usually ships in 24 hours Michael Busby, Mike Busby / Paperback / Published 1998 Our Price: $23.96 ~ You Save: $5.99 (20%) Development and Applications of Atm : Selected Readings ~ Usually ships in 2-3 days Mehmet Toy(Editor) / Paperback / Published 1996 Our Price: $49.95 An Engineering Approach to Computer Networking : Atm Networks, the Internet, and the Telephone Network (Addison-Wesley Professional Computing Series) ~ Usually ships in 24 hours Srinivsan Keshav, et al / Hardcover / Published 1997 Our Price: $49.95 Essential Atm Standards : Rfcs and Protocols Made Practical ~ Usually ships in 24 hours Peter Loshin, Pete Loshin / Hardcover / Published 1999 Our Price: $44.99 Essentials of Atm Networks and Services ~ Usually ships in 24 hours Oliver Chukwudi Ibe / Paperback / Published 1997 Our Price: $24.95 ExperTech ATM ~ Usually ships in 24 hours Inc. Hill Associates / CD-ROM Our Price: $119.00 ExperTech Series - ATM, DWDM & ISDN Inc Hill Associates / Audio CD Our Price: $269.00 Guide to Atm Systems and Technology (Artech House Telecommunications Library) ~ Usually ships in 24 hours Mohammad A. Rahman / Hardcover / Published 1998 Our Price: $73.00 Hands-On ATM ~ Usually ships in 2-3 days David E. McDysan, Darren L. Spohn (Contributor) / Paperback / Published 1997 Our Price: $42.46 ~ You Save: $7.49 (15%) High Speed Networks: TCP/IP and ATM Design Principles ~ Usually ships in 24 hours William Stallings / Hardcover / Published 1997 Our Price: $69.00 High-Speed Wireless Atm and Lans ~ Usually ships in 24 hours Benny Bing / Hardcover / Published 2000 Our Price: $75.00 Internetworking ATM: For the Internet and Enterprise Networks ~ Usually ships in 2-3 days John A. Chiong / Paperback / Published 1997 Our Price: $55.00 Internetworking over Atm : An Introduction ~ Usually ships in 2-3 days Brian Dorling(Editor), et al / Paperback / Published 1996 Our Price: $47.00 Introduction to ATM Design and Performance: With Applications Analysis Software ~ Usually ships in 24 hours J. A. Schormans, et al / Hardcover / Published 1996 Our Price: $82.95 Introduction to ATM Networking (McGraw-Hill Computer Communications Series) ~ Usually ships in 24 hours Walter J. Goralski / Hardcover / Published 1995 Our Price: $55.00 Introduction to Atm Networks and B-Isdn ~ Usually ships in 2-3 days Koichi Asatani, et al / Hardcover / Published 1997 Our Price: $115.00 Ip Applications With Atm (Computer Communications) ~ Usually ships in 2-3 days John J. Amoss(Contributor), et al / Paperback / Published 1998 Our Price: $55.00 Isdn and Broadband Isdn With Frame Relay and Atm ~ Usually ships in 24 hours William Stallings / Hardcover / Published 1998 Our Price: $72.00 Lan, Atm, and Lan Emulation Technologies (Artech House Telecommunications Library) ~ Usually ships in 24 hours Daniel Minoli, Anthony Alles (Contributor) / Hardcover / Published 1996 Our Price: $89.00 Go to Author, Title, Subject Search now. | Search|Browse| Return to Lasermate Corporation Home Page FiberChannel Foods for Brain Book Store FIBER CHANNEL Click on title for more details and ORDER. Designing Storage Area Networks: A Practical Reference for Implementing Fibre Channel SANs (The Addison-Wesley Networking Basics Series) ~ Usually ships in 24 hours Tom Clark, Thomas Clark / Paperback / Published 1999 Our Price: $15.96 ~ You Save: $3.99 (20%) Fibre Channel Bench Reference (ENDL SCSI Series) ~ Usually ships in 24 hours Jeffrey Stai / Paperback / Published 1995 Our Price: $99.00 Fibre Channel for Mass Storage ~ Usually ships in 24 hours Ralph H. Thornburgh / Textbook Binding / Published 1999 Our Price: $45.00 Fibre Channel: Gigabit Communications and I/O for Computer Networks (McGraw-Hill Computer Communications Series) ~ Usually ships in 24 hours Alan F. Benner / Hardcover / Published 1995 Our Price: $70.00 Fibre Channel : Connection to the Future Paperback / Published 1999 Our Price: $13.56 ~ You Save: $3.39 (20%) (Back Ordered) Fibre Channel Bench Reference (Endl Scsi Series) Jeffrey D. Stai / Paperback / Published 1995 Our Price: $195.00 (Special Order) What is Fibre Channel? (4th Ed.) Jan Dedlk, et al / Mass Market Paperback / Published 1997 Our Price: $9.50 + $0.85 special surcharge (Special Order) Go to Author, Title, Subject Search now. | Search|Browse| Return to Lasermate Corporation Home Page Gigabit Ethernet Foods for Brain Book Store GIGABIT ETHERNET Click on title for more details and ORDER. Gigabit Ethernet : Migrating to High-Bandwidth Lans (Prentice Hall Series in Computer Networking and Distributed Systems) ~ Usually ships in 24 hours Jayant Kadambi, et al / Hardcover / Published 1998 Our Price: $49.99 Gigabit Ethernet : Technology and Applications for High-Speed LANs ~ Usually ships in 24 hours Rich Seifert / Hardcover / Published 1998 Our Price: $49.95 Gigabit Ethernet Networking (The MacMillan Technology Series) ~ Usually ships in 24 hours David Cunningham, William Lane / Hardcover / Published 1999 Our Price: $50.00 Switched, Fast, and Gigabit Ethernet (Mtp Network Engineering Series) ~ Usually ships in 24 hours Sean Riley, Robert A. Breyer / Hardcover / Published 1999 Our Price: $50.00 Data Communications Gigabit Ethernet Handbook ~ Usually ships in 24 hours Stephen Saunders / Paperback / Published 1998 Our Price: $45.00 Mastering Gigabit Ethernet, Atm & Other High-Speed Lans V. C Marney-Petix / Paperback / Published 1997 Our Price: $45.95 (Special Order) Go to Author, Title, Subject Search now. | Search|Browse| Return to Lasermate Corporation Home Page Safety-Foods for Brain Book Store Foods for Brain Book Store Click on title for more details and ORDER. Laser and Eye Safety in the Laboratory; Gabe Garcia, Larryl Matthews; Paperback; $34.95 Medical Lasers and Their Safe Use; David H. Sliney, Stephen L. Trokel; Hardcover (Publisher Out Of Stock) Go to Author, Title, Subject Search now. | Search | Browse Laser Products VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | SALES REP. WANTED! We are looking for Sales Rep. to market our excellent laser products. These products are high quality and low cost. They are good for promotion, gift, school, and pet shop ...etc. Please call Mr. Paul Lin at (909)718-0999 or send e-mail to: paul@lasermate.com. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Do-It-Yourself Laser Pointers Do-It-Yourself Laser Pointers SPECIFICATION OF DIY (Do-It-Yourself) LASER POINTER WAVELENGTH: 660NM MODEL NO.: DIY-660 OUTPUT POWER: CLASS IIIA (<5MW) BATTERY: 2 X "AAA" 1.5V (INCLUDED) HOUSING: ABS Plastic COLOR: BLACK WEIGHT: 1 OZ DIMENSIONS : 0.6" X 1.0" X 4.5" Some soldering is required. Do-It-Yourself Laser Pointers For your information, the brightness of 660nm laser pointer is about 1.9 time brighter than that of 670nm. We offer 660nm laser pointer with the same low price of 670nm laser pointer. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Green Laser Pointers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Green Laser Pointers ONLY $275.00 ! PLEASE SEE THE SPEC FOR MORE INFORMATION. FEATURES: LOWER OPERATING CURRENT TYPICAL 250 mA! COMPACT PACKAGE FITTING IN YOUR POCKET. BETTER SWITCH DESIGN. LOW COST. SPECIFICATIONS MODEL NO. WAVELENGTH GLP-03-B (or -S) 532 NM GLP-05-B (or-S) 532 NM Green Laser Pointers PULSED PEAK POWER LASER CLASS RANGE* HOUSING BODY COLOR OPERATION SWITCH BATTERY DIMENSIONS UNIT PRICE WARRANTY 1.5 - 3 MW @ 25 oC IIIA < 2,100 YARD BRASS BLACK (OR SILVER) PUSH BUTTON 2 X "N" 1.5V (INCLUDED) DIA. 1.3 X L. 13.6 CM $275.00 90 DAYS 3 - 5 MW @ 25 oC III A < 3,500 YARD BRASS BLACK (OR SILVER) PUSH BUTTON 2 X "N" 1.5V (INCLUDED) DIA. 1.3 X L. 13.6 CM $325.00 90 DAYS *The range of laser is variable with factors such as background lightness and air quality. For your information, the 532 nm laser is about 35 time brighter the 670 nm laser. To order please click here to use the order form. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | LS-10 Laser Pointers LS-10 Laser Pointers SPECIFICATION OF LS-10 LASER POINTER MODEL NO.: LS-10-650 WAVELENGTH: 650NM OUTPUT POWER: CLASS IIIA (<5MW) HOUSING: METAL PEN STYLE DIMENSIONS : 10CM (L) x 1.3CM (DIA) BATTERY: 2 X "N" 1.5V (INCLUDED) COLOR: BLACK STANDARD PACKAGING: PLASTIC BOX (ONLY $19.95 FOR ONE!) OPTIONAL PACKAGING: LUXURY JEWELRY BOX (ADDING $5.00 MORE) WARRANTY: ONE YEAR For your information, the brightness of 650nm laser pointer is about 3.4 time LS-10 Laser Pointers brighter than that of 670nm. We offer 650nm laser pointer with the same low price of 670nm laser pointer. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Keychain Laser Pointers Fashionable Keychain Laser Pointers SPOTLITE MISSILE KEYCHAIN LASER POINTER only $7.95 for one! Model No. LS-10K-645 (B) or (S) SPECIFICATIONS Wavelength: 645nm Output power: <5mW Laser class: IIIa Operating voltage: 4.5VDC Battery: Watch battery L1154 (1.5VDC) x 3 included Style: Bullet keychain Housing: Metal Range: 1500 feet** Color: Black (or Silver) body, gold head & bottom Size: Dia. 1.32cm x L. 6.6cm SPOTLITE MISSILE 5-in-1 KEYCHAIN LASER POINTER only 9.95 for one! Keychain Laser Pointers Model No. LS-10K-645-5 (B) or (S) SPECIFICATIONS Wavelength: 645nm Output power: <5mW Laser class: IIIa Operating voltage: 4.5VDC Battery: Watch battery L1154 (1.5VDC) x 3 included Style: Bullet keychain Housing: Metal Range: 1500 feet** 4 interchangeable heads: Aiming (circle plus cross hair), Dollar Sign, Spaceship, I love U (included) Color: Black (or Silver) body, gold head & bottom Size: Dia. 1.32cm x L. 6.6cm **The range of laser is variable with factors such as background lightness and air quality. For your information, the 645nm laser is about 4 time brighter than 670nm laser. We offer 645nm laser pointer with the same low price of 670nm laser pointer. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Laser Card Pointers Mirage Card Laser Pointers SPECIFICATION OF MIRAGE CARD LASER POINTER MODEL NO.: LR-6200 Laser Card Pointers WAVELENGTH: 650 nm OUTPUT POWER: CLASS II (<1mW) BATTERY: 2 X LR44 (L1154) batteries (Included) HOUSING: ABS Plastic COLOR: BLACK WEIGHT: 28 g (batteries excluded). DIMENSIONS: 5 x 8 x 1.2 cm The class II laser pointer is European's Favorite Laser Pointers. Large blank space with affordable price is ideal for premium item. The compact body and the unique colorful soft touch button make your presentation easier. For your information, the brightness of 650nm laser pointer is about 3.4 time brighter than that of 670nm. We offer 650nm laser pointer with the same low price of 670nm laser pointer. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Laser Aimer Laser Aimer SPECIFICATION OF OEM LASER AIMER Wavelength: 635nm, 650nm, 660nm, 808nm, 830nm & 850nm Class II (< 1mW) & Class IIIa (< 5mW) ACC circuit with short-circuit and reverse-polarity protections Specially designed windage and elevation set screws for precise aiming Dimensions: 15.9 mm Dia. x 56mm L. Prices: highly competitive For your information, the brightness of 660nm laser aimer is about 1.9 time brighter than that of 670nm. We offer 660nm laser aimer with the same Laser Aimer low price of 670nm laser aimer. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Laser Accessories- Diode Drive Circuits Diode Driver Circuit Boards Models of Diode Driver Circuit Boards Laser Accessories- Diode Drive Circuits APCR-FH Circuit Board APC-4H Circuit Board APCR-FL Circuit Board APC-4L Circuit Board APCR-W Circuit Board APCA-42H Analog Modulation APCR-K Circuit Board APCA-42L Analog Modulation ACC-8H Circuit Board APCT-42H TTL Modulation ACC-8L Circuit Board APCT-42L TTL Modulation Item No.: APCR-FH APC with voltage regulator Soft-start protection Short circuit protection Reversal polarity protection Output power adjustable Input voltage 4.5 - 6 V DC Output power constant Size: 18x10x6 mm For laser diode with monitor current in the range of 0.1 mA Item No.: APCR-FL APC with voltage regulator Soft-start protection Short circuit protection Reversal polarity protection Output power adjustable Input voltage 4.5 - 6 V DC Output power constant Size: 18x10x6 mm For laser diode with monitor current in the range of 0.01 mA Laser Accessories- Diode Drive Circuits Item No.: APCR-W APC with voltage regulator Short circuit protection Reversal polarity protection Output power adjustable Input voltage 2.8 - 4.5 V DC Output power constant Size: 12x7.5x5.5 mm For laser diode with monitor current in the range of 0.1 mA Item No.: APCR-K APC with voltage regulator Short circuit protection Reversal polarity protection Output power adjustable Input voltage 2.8 - 10 V DC Output power constant Size: 11x10.5x5.5 mm For laser diode with monitor current in the range of 0.01 mA Item No.: ACC-8H Open loop power control Short circuit protection Reversal polarity protection Output power adjustable Laser Accessories- Diode Drive Circuits Input voltage 2.8 - 4.5 VDC Output power constant Size: Dia. 10 x 3 mm For laser diode with monitor current in the range of 0.1 mA Item No.: ACC-8L Open loop power control Short circuit protection Reversal polarity protection Output power adjustable Input voltage 2.7 - 6 VDC Output power constant Size: Dia. 10 x 3 mm For laser diode with monitor current in the range of 0.01 mA Item No.: APC-4H APC without voltage regulator Output power adjustable Input voltage 3 - 4.5 V DC Output power constant Size: Dia. 10 x 3 mm For laser diode with monitor current in the range of 0.1 mA Item No.: APC-4L APC without voltage regulator Output power adjustable Laser Accessories- Diode Drive Circuits Input voltage 3 - 6 V DC Output power constant Size: Dia. 10 x 3 mm For laser diode with monitor current in the range of 0.01 mA Item No.: APCA-42H APC with analog modulation Output power adjustable Input voltage 3 V DC Output power constant For laser diode with monitor current in the range of 0.1 mA Item No.: APCA-42L APC with analog modulation Output power adjustable Input voltage 3 V DC Output power constant For laser diode with monitor current in the range of 0.01 mA Item No.: APCT-42H APC with TTL modulation Output power adjustable Input voltage 5 V DC Output power constant For laser diode with monitor current in the range of 0.1 mA Laser Accessories- Diode Drive Circuits Item No.: APCT-42L APC with TTL modulation Output power adjustable Input voltage 5 V DC Output power constant For laser diode with monitor current in the range of 0.01 mA Drive circuits for laser diodes are either automatic power control (APC) circuits that maintain a constant light output power or automatic current control (ACC) circuits that maintain a constant current. The output power and wavelength of the laser diode can be affected by the changing of temperature. APC circuits provide a constant light output power despite variations in ambient temperature. If you have a DC power supply which provides you an accurate and stable DC voltage. You may use this APC circuit board without voltage regulator. APC with voltage regulator circuit enhances the function of APC circuit. It provides constant output power when the input voltage is between 2.8V DC and 6V DC. Even with constant current drive, the output power of laser diodes varies with ambient temperature. However, a slight change of output power during operation is acceptable for many applications such as laser pointer and laser sight. In addition, battery is the most popular power source for laser diode module. In this case, the output power of laser will go down caused by the battery voltage decreased. The ACC circuit will provide the laser diode with constant current and stable output power. Direct drive circuit is the simplest design circuit for the lowest cost or professional user. The input power is connected directly to the laser diode without any protection circuit. You can have the complete control ability of the laser module such as modulation, operating voltage, and power control. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Laser Accessories- Optics Optics Collimating Lenses Compact Beam Expanders Line Generating Optics Diffractive Optics Collimating Lenses Item No. Description CL3G-1 3-element glass lens w/AR coating Effective focal length = 8 mm Back focal length = 1.5 mm Numerical aperture = 0.3 Exit pupil = 5 mm dia. Dimensions = M 9mm x L13mm CL1P-1 Plastic aspheric lens w/AR coating Laser Accessories- Optics Effective focal length = 7.9 +/- 0.05 mm Back focal length = 6.3 +/-0.05 mm Numerical aperture = 0.3 Wavelength = 670 +/- 20 nm RMS wavefront error = 0.01 waves Exit pupil = 5 mm Dia Dimensions = Dia. 7 mm x L 3.5 mm Compact Beam Expanders Item No. Beam expander Beam diameter Divergence TC-2X 2X 4 mm < 0.25 mrd TC-3X 3X 4 mm < 0.17 mrd Laser Accessories- Optics TC-7X TC-10X 7X 4 mm < 0.07 mrd 10X 4 mm < 0.05 mrd * Connecting to LT- & TX- Laser Module Directly * All Optical Glass Lens with AR coating * Focusing Range from 50 cm to infinity * Max. Entrance Aperture Dia. 4 mm * Minimizing Beam Spot Size at Long Working Distance Line Generating Optics Item No.: LO-90 * LO-90 Line Generating Optics * Connecting to LT- & LX- Laser Module Directly * Cylinder Glass Lens Laser Accessories- Optics * Full Fan Angle 90 deg. * Focusing range from 50 cm to infinity * Thickness of line: 2 mm at 700 cm distance Item No.: LO-60 LO-30 LO-45 LO-15 LO-04 * LO- 60, 45, 30, 15, 04 Line Generating Optics * Connecting to LT- & LX- Laser Module Directly * Glass Lens * Full Fan Angle 60, 45, 30, 15, 4 deg. Diffractive Optics * Creating Linear, Circular, Star, Cross Hair, and Square Patterns Please call (909)598-6226 for more information. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 650nm/5mW Laser Diode LD650-5B Specifications Specifications of 650nm/5mW Laser Diode LD-650-5B Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 5 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V Pin Connections TO-18 Package ( 5.6 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 640 650 660 nm Po=5mW Threshold Current Ith 10 15 20 mA CW Operating Current Iop - 25 45 mA Po=5mW Operating Voltage Vop - - 2.5 V Po=5mW Beam Divergence // 5 8 11 deg Po=5mW, FWHM Beam Divergence 25 31 37 deg Po=5mW, FWHM Monitor Current Im 10 50 90 A Po=5mW Astigmatism (m) As - 11 - m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 650nm/5mW Laser Diode LD650-5B Specifications 650nm/5mW Laser Diode LD650-5A Specifications Specifications of 650nm/5mW Laser Diode LD-650-5A Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 5 mW Operating Temperature Top -10 to +50 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V Pin Connections TO-18 Package ( 5.6 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 640 650 660 nm Po=5mW Threshold Current Ith 10 15 20 mA CW Operating Current Iop - 25 45 mA Po=5mW Operating Voltage Vop - - 2.5 V Po=5mW Beam Divergence // 5 8 11 deg Po=5mW, FWHM Beam Divergence 25 31 37 deg Po=5mW, FWHM Monitor Current Im 10 50 90 A Po=5mW Astigmatism (m) As - 11 - m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 650nm/5mW Laser Diode LD650-5A Specifications 650nm/5mW Laser Diode LD650-5E Specifications Specifications of 650nm/5mW Laser Diode LD-650-5E, MTTF>20,000 hr at 70 oC 5mW Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 7 mW Operating Temperature Top -10 to +60 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V TO-18 Package ( 5.6 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 645 655 660 nm Po=5mW Threshold Current Ith - 35 45 mA CW Operating Current Iop - 45 60 mA Po=5mW Operating Voltage Vop 2.2 2.4 V Po=5mW Beam Divergence // 6 8 12 deg Po=5mW, FWHM Beam Divergence 25 32 40 deg Po=5mW, FWHM Monitor Current Im 0.05 0.2 0.4 mA Po=5mW Slope Efficiency d 0.3 0.5 0.8 m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 650nm/5mW Laser Diode LD650-5E Specifications 650nm/10mW Laser Diode LD650-10I Specifications Specifications of 650nm/10mW Laser Diode LD-650-10I Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 10 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -15 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-18 Package ( 5.6 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 640 650 665 nm Po=10mW Threshold Current Ith 10 20 30 mA CW Operating Current Iop - 40 60 mA Po=10mW Operating Voltage Vop - 2.3 2.8 V Po=10mW Beam Divergence // 5 7 12 deg Po=10mW, FWHM Beam Divergence 32 38 42 deg Po=10mW, FWHM Monitor Current Im 0.1 0.3 1 mA Po=10mW Astigmatism (m) As - 11 - m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 650nm/20mW Laser Diode LD650-20G Specifications Specifications of 650nm/20mW Laser Diode LD-650-20G Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 20 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-18 Package ( 5.6 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 645 650 660 nm Po=20mW Threshold Current Ith - 25 35 mA CW Operating Current Iop - 60 80 mA Po=20mW Operating Voltage Vop 2.1 2.3 2.8 V Po=20mW Beam Divergence // 6 7 9 deg Po=20mW, FWHM Beam Divergence 32 38 42 deg Po=20mW, FWHM Monitor Current Im 0.1 0.3 0.85 mA Po=20mW Slope Efficiency 0.45 0.55 1 mW/mA The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 635nm/5mW Laser Diode LD635-5A Specifications Specifications of 635nm/5mW Laser Diode LD-635-5A Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 5 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V Pin Connections TO-18 Package ( 5.6 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 630 635 640 nm Po=5mW Threshold Current Ith 30 35 45 mA CW Operating Current Iop - 45 75 mA Po=5mW Operating Voltage Vop - - 2.5 V Po=5mW Beam Divergence // 5 8 11 deg Po=5mW, FWHM Beam Divergence 25 31 37 deg Po=5mW, FWHM Monitor Current Im - 15 - A Po=5mW Astigmatism (m) As - 11 - m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 635nm/5mW Laser Diode LD635-5A Specifications 635nm/5mW Laser Diode LD635-5I Specifications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Specifications of 635nm/5mW Laser Diode LD-635-5L Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 5 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V Pin Connections TO-5 Package ( 9 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Lasing Wavelength Threshold Current Operating Current Operating Voltage Beam Divergence Beam Divergence Monitor Current Astigmatism (m) Symbol // Im Min. 625 8 25 10 Typ. 635 30 40 2.2 10 31 30 Max. 645 50 60 2.4 11 40 90 Unit nm mA mA V deg deg As - 8 - m p Ith Iop Vop A Test Condition Po=5mW CW Po=5mW Po=5mW Po=5mW, FWHM Po=5mW, FWHM Po=5mW If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 635nm/5mW Laser Diode LD635-5I Specifications Specifications of 635nm/5mW Laser Diode LD-635-5I Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 5 mW Operating Temperature Top -10 to +50 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V Pin Connections TO-5 Package ( 9 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p - 635 640 nm Po=5mW Threshold Current Ith - 30 50 mA CW Operating Current Iop - 40 60 mA Po=5mW Operating Voltage Vop - 2.2 2.4 V Po=5mW Beam Divergence // 6 8 10 deg Po=5mW, FWHM Beam Divergence 25 35 40 deg Po=5mW, FWHM Monitor Current Im 0.15 0.3 0.65 mA Po=5mW Astigmatism (m) As - 8 - m The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 635nm/5mW Laser Diode LD635-5I Specifications 635nm/10mW Laser Diode LD635-10I Specifications Specifications of 635nm/10mW Laser Diode LD-635-10I Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 10 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-5 Package ( 9 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Lasing Wavelength p 630 635 640 nm Po=10mW Threshold Current Ith 25 30 40 mA CW Operating Current Iop 40 55 70 mA Po=10mW Operating Voltage Vop 1.95 2.2 2.3 V Po=10mW Beam Divergence // 8 10 12 deg Po=10mW, FWHM Beam Divergence 30 32 35 deg Po=10mW, FWHM Monitor Current Im 0.01 0.05 0.3 mA Po=10mW Slop Efficiency dP/dI 0.2 0.4 0.6 W/A Po=10mW dV/dI 5 8 11 Po=10mW Differential Temperature Test Condition The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 635nm/10mW Laser Diode LD635-10I Specifications 635nm/15mW Laser Diode LD635-15I Specifications Specifications of 635nm/15mW Laser Diode LD-635-15I Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 15 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-5 Package ( 9 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Lasing Wavelength p 630 635 640 nm Po=15mW Threshold Current Ith 25 30 40 mA CW Operating Current Iop 50 65 80 mA Po=15mW Operating Voltage Vop 1.95 2.2 2.3 V Po=15mW Beam Divergence // 8 10 12 deg Po=15mW, FWHM Beam Divergence 30 32 35 deg Po=15mW, FWHM Monitor Current Im 0.01 0.05 0.3 mA Po=15mW Slop Efficiency dP/dI 0.35 0.45 0.6 W/A Po=15mW dV/dI 5 8 11 Po=15mW Differential Temperature Test Condition The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 635nm/15mW Laser Diode LD635-15I Specifications 808nm/5mW Laser Diode LD808-5I Specifications Specifications of 808nm/5mW Laser Diode LD-808-5A Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Pin Connections Optical Power Po 5 mW Operating Temperature Top -10 to +40 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-18 Package ( 5.6 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 800 808 820 nm Po=5mW Threshold Current Ith 15 25 40 mA CW Operating Current Iop 25 35 50 mA Po=5mW Operating Voltage Vop 2.0 2.4 2.7 V Po=5mW Beam Divergence // 8 10 11 deg Po=5mW, FWHM Beam Divergence 25 31 40 deg Po=5mW, FWHM Slope Efficiency dPo/dIop 0.4 0.5 0.7 mW/mA Monitor Current Im 10 40 90 A Astigmatism (m) As - 11 - m Po=5mW The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 808nm/5mW Laser Diode LD808-5I Specifications 808nm LASER DIODE Specifications of LD-808-200G Laser Diode Model No.: LD-808-200G Bottom view APPLICATIONS Diode pump solid state laser Medical instrument FEATURES Wavelength : = 808 nm (Typ.) Output power : 200mW CW High Efficiency MOCVD Quantum Well Design 9 mm package Pin configuration: 1. Laser diode cathode 2. Photo diode anode 3. Common Absolute Maximum Ratings (TC=25oC) Description Symbol Rating Optical Power (mW) P0 Operating Temperature (oC) Top 200 -10 ~ 30 Storage Temperature (oC) Tstg -40 ~ 80 LD Reverse Voltage (V) VRLD 2 PD Reverse Voltage (V) VRPD 15 Optical & Electrical Characteristic LD-808-200G Description Symbol Min. Typ. Max Test Condition 805 808 811 P0=180mW Lasing Wavelength(nm) Threshold Current (mA) Ith -- 150 200 CW Operating Current (mA) Iop -- 350 500 P0=180mW Operating Voltage (V) Vop -- 1.9 P0=180mW 0.5 0.9 Slope Efficiency (W/A) 3.0 Monitoring Current(mA) Im Beam Divergence (deg) // 4 9 17 20 30 40 Recommended Operating Temperature (oC) 0.3 25 P0=180mW P0=180mW FWHM 808nm LASER DIODE * ESD precautions must be taken when handling this unit. ** Invisible laser radiation avoid direct exposure to beam. Note: Specification subject to change without notice. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 808nm LASER DIODE Specifications of LD-808-500G Laser Diode Model No.: LD-808-500G Bottom view APPLICATIONS Diode pump solid state laser Medical instrument FEATURES Wavelength : = 808 nm (Typ.) Output power : 500mW CW High Efficiency MOCVD Quantum Well Design 9 mm package Pin configuration: 1. Laser diode cathode 2. Photo diode anode 3. Common Absolute Maximum Ratings (TC=25oC) Description Symbol Rating Optical Power (mW) P0 Operating Temperature (oC) Top 550 -10 ~ 30 Storage Temperature (oC) Tstg -40 ~ 80 LD Reverse Voltage (V) VRLD 2 PD Reverse Voltage (V) VRPD 15 Optical & Electrical Characteristic LD-808-500G Description Symbol Min. Typ. Max Test Condition Lasing Wavelength(nm) 805 808 811 P0=500mW Threshold Current (mA) Ith -- 160 300 CW Operating Current (mA) Iop -- 750 900 P0=500mW Operating Voltage (V) Vop -- 2.2 2.8 P0=500mW 0.5 0.9 Slope Efficiency (W/A) Monitoring Current(mA) Im 0.12 0.8 1.6 P0=500mW Beam Divergence (deg) // 4 9 17 P0=500mW FWHM 20 30 40 Recommended Operating Temperature (oC) 25 808nm LASER DIODE * ESD precautions must be taken when handling this unit. ** Invisible laser radiation avoid direct exposure to beam. Note: Specification subject to change without notice. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 808nm LASER DIODE Specifications of LD-808-1000G Laser Diode Model No.: LD-808-1000G APPLICATIONS Diode pump solid state laser Medical instrument FEATURES Wavelength : = 808 nm (Typ.) Output power : 1000mW CW High Efficiency MOCVD Quantum Well Design 9mm package Bottom view Unit: inch Pin configuration: 1: LD cathode 2: LD anode Absolute Maximum Ratings (TC=25oC) Description Symbol Optical Power (mW) Rating P0 Top 1000 -10 ~ 40 Storage Temperature (oC) Tstg -30 ~ 70 LD Reverse Voltage (V) VRLD 3 Operating Temperature (oC) Optical & Electrical Characteristic LD-808-1000G Description Symbol Min. Typ. Max Test Condition Lasing Wavelength(nm) 790 808 815 P0=1000mW Threshold Current (mA) Ith -- 200 400 CW Operating Current (A) Iop -- 1.20 1.50 Operating Voltage (V) Vop 1.8 2.0 2.2 0.8 1.0 1.1 // 10 11 12 25 30 40 Slope Efficiency (W/A) Beam Divergence (deg) Recommended Operating Temperature (oC) * ESD precautions must be taken when handling this unit. ** Invisible laser radiation avoid direct exposure to beam. 25 P0=1000mW P0=1000mW P0=1000mW FWHM 808nm LASER DIODE Note: Specification subject to change without notice. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 808nm LASER DIODE Specifications of LD-808-1W Laser Diode Model No.: LD-808-1W Bottom view APPLICATIONS Diode pump solid state laser Medical instrument FEATURES Wavelength : = 808 nm (Typ.) Output power : 1W CW High Efficiency MOCVD Quantum Well Design 9 mm package Pin configuration: 1. Laser diode cathode 2. Photo diode anode 3. Common Absolute Maximum Ratings (TC=25oC) Description Symbol Rating Optical Power (mW) P0 Operating Temperature (oC) Top 1100 -10 ~ 30 Storage Temperature (oC) Tstg -40 ~ 80 LD Reverse Voltage (V) VRLD 2 PD Reverse Voltage (V) VRPD 15 Optical & Electrical Characteristic LD-808-1W Description Symbol Min. Typ. Max Test Condition 805 808 811 P0=1W Threshold Current (A) Ith -- 0.3 0.5 CW Operating Current (A) Iop -- 1.4 2 P0=1W Operating Voltage (V) Vop -- 2.1 3.0 P0=1W 0.5 0.9 Lasing Wavelength(nm) Slope Efficiency (W/A) Monitoring Current(mA) Im 0.3 1.5 6 P0=1W Beam Divergence (deg) // 4 9 17 P0=1W FWHM 20 30 40 Recommended Operating Temperature (oC) 25 808nm LASER DIODE * ESD precautions must be taken when handling this unit. ** Invisible laser radiation avoid direct exposure to beam. Note: Specification subject to change without notice. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 830nm/40mW Laser Diode LD830-40I Specifications Specifications of 830nm/40mW Laser Diode LD-830-40I Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 40 mW Operating Temperature Top -10 to +50 C Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V Pin Connections TO-5 Package ( 9 mm ) PD reverse Voltage VRPD 30 V Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Lasing Wavelength p 815 830 845 nm Po=30mW Threshold Current Ith - 40 70 mA CW Operating Current Iop - 85 130 mA Po=30mW Operating Voltage Vop - 2.4 3.0 V Po=30mW Beam Divergence // 7 10 15 deg Po=30mW, FWHM Beam Divergence 15 25 40 deg Po=30mW, FWHM dPo/dIop 0.4 0.7 - mW/mA Po=30mW Im 0.15 0.35 - mA Po=30mW Differential Efficiency Monitor Current Test Condition The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 830nm/40mW Laser Diode LD830-40I Specifications 980nm 50mW Laser Diode LD980-50I Specifications Specifications of 980 nm 50mW Laser Diode LD-980-50I Features: 980nm 50mW laser diode single mode index guided Low threshold current No monitoring PD Output power stable (+/-10% ) with temperature change (20 oC) MTTF > 3,000 hours @ 25 oC Low cost Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 50 mW Operating Temperature Top 0 to +80 C Pin Connections No monitoring PD Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-18 Package ( 5.6 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 965 980 995 nm Po=50mW Threshold Current Ith 3 8 11 mA CW Operating Current Iop 80 80 100 mA Po=50mW Operating Voltage Vop 1.7 1.9 2.1 V Po=50mW Beam Divergence // 8 10 12 deg Po=50mW, FWHM 980nm 50mW Laser Diode LD980-50I Specifications 33 35 37 deg Po=50mW, FWHM Slop Efficiency dP/dI 0.6 0.7 0.8 W/A Po=50mW Differential Temperature dV/dI 5 8 10 Po=50mW Top 0 25 80 C Beam Divergence Operating Temperature The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. 980nm 100mW Laser Diode LD980-100I Specifications Specifications of 980 nm 100mW Laser Diode LD-980-100I Features: 980nm 100mW laser diode single mode index guided Low threshold current No monitoring PD Output power stable (+/-10% ) with temperature change (20 oC) MTTF > 3,000 hours @ 25 oC Low cost Absolute Maximum Ratings (Tc=25C) Parameter Symbol Ratings Unit Optical Power Po 100 mW Operating Temperature Top 0 to +80 C Pin Connections No monitoring PD Storage Temperature Tstg -40 to +85 C LD reverse Voltage VRLD 2 V PD reverse Voltage VRPD 30 V TO-5 Package ( 9 mm ) Optical and Electrical Characteristics (Tc=25C) Parameter Symbol Min. Typ. Max. Unit Test Condition Lasing Wavelength p 965 980 995 nm Po=100mW Threshold Current Ith 7 10 15 mA CW Operating Current Iop 140 150 170 mA Po=100mW Operating Voltage Vop 1.7 1.9 2.1 V Po=100mW Beam Divergence // 8 10 12 deg Po=100mW, FWHM 980nm 100mW Laser Diode LD980-100I Specifications 33 35 37 deg Po=100mW, FWHM Slop Efficiency dP/dI 0.7 0.75 0.8 W/A Po=100mW Differential Temperature dV/dI 5 8 10 Po=100mW Top 0 25 80 C Beam Divergence Operating Temperature The data is presumed to be accurate; however, it is subject to change without notice. Lasermate Corporation makes no representation as to the accuracy of the information and does not assume any responsibility for errors or omissions contained herein. VCSEL device VCSEL Diodes VCSEL Diodes for General Applications VCSEL Diodes for Data Communications Infrared 850 nm wavelength, output < 5 mW, circular laser beam, low divergence angle, low threshold current. Various package types such as epoxy molded leadframe or ceramic header, TO-46 metal can with & without monitoring PD. Providing high performance laser output with narrow linewidth Suitable to the optical applications of sensoring, automatic control, reading, free-space communication, pickup head, etc.. VCSEL Diodes for General Applications Please click each Model No. for the detail spec. MODEL NO. PACKAGE DESCRIPTION VCE-A85B20 850nm VCSEL in epoxy molded with ceramic heat sink VCE-C85B20 850nm VCSEL in epoxy molded with sharply-round surface VCE-D85B20 850nm VCSEL in epoxy molded with dia. 5mm round top surface VCE-E85B20 850nm VCSEL in epoxy molded with flat top surface PICTURE VCSEL device VCE-F85B20 850nm VCSEL in epoxy molded with dia. 3mm round top surface VCT-A85B20 850nm VCSEL in TO-46 metal can with cap lens VCT-B85B20 850nm VCSEL in TO-46 metal can with dome lens cap VCT-F85B20 850nm VCSEL in TO-46 metal can with flat window cap VCSEL Diodes for Data Communications Please click each Model No. for the detail spec. MODEL NO. PACKAGE DESCRIPTION VCT-A85A40 850nm VCSEL diode without PD in 4-pin TO-46 metal can with cap lens VCT-A85A41 & VCT-A85A42 850nm VCSEL diode with PD in 4-pin TO-46 metal can with cap lens PICTURE VCSEL device VCT-F85A40 VCT-F85A41 & 850nm VCSEL diode without PD in 4-pin TO-46 metal can with flat window cap 850nm VCSEL diode with PD in 4-pin TO-46 metal can with flat window cap VCT-F85A42 If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCE-A85B20 VCSEL Diode Specifications of VCE-A85B20 VCSEL Diode Model No. VCE-A85B20 Features Picture * Epoxy molded with round emission surface. * Ceramic heat sink. * Low dependence of power output over temperature. * Miniature, easy for mounting. * Driving current between 8 to 15 mA. * Symmetrical beam. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series resistance Rs 40 Beam Divergence 7 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith Min. Typ. Max. 1000 -1.5 Unit C /W +1.5 mA Test Conditions TA= 25 oC TA= 0 to 70 oC Specifications of VCE-A85B20 VCSEL Diode VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.25 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.07 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 100 C Operating Temperature -20 70 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCE-A85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCE-A85B20 VCSEL Diode Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCE-C85B20 VCSEL Diode Specifications of VCE-C85B20 VCSEL Diode Model No. VCE-C85B20 Features Picture * Epoxy molded with sharply-round emission surface. * Copper leadframe, good heat dissipation. * Low dependence of power output over temperature. * Driving current between 8 to 15 mA. * Nominal 1.5emission angle. * Ideal for long distance detection. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series resistance Rs 40 Beam Divergence 1.5 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith Min. Typ. Max. 1000 -1.5 Unit C /W +1.5 mA Test Conditions TA= 25 oC TA= 0 to 70 oC Specifications of VCE-C85B20 VCSEL Diode VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.25 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.07 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 100 C Operating Temperature -20 70 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCE-C85B20 VCSEL Diode Specifications of VCE-C85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 15 mA Fig. 2 Typical Electrical Characteristics Specifications of VCE-C85B20 VCSEL Diode Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCE-D85B20 VCSEL Diode Specifications of VCE-D85B20 VCSEL Diode Model No. VCE-D85B20 Features Picture * Epoxy molded with round emission surface. * Copper leadframe, good heat dissipation. * Low dependence of power output over temperature. * Driving current between 8 to 15 mA. * Nominal 5emission angle. * Ideal for high resolution detection. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series resistance Rs 40 Beam Divergence 5 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith Min. Typ. Max. 1000 -1.5 Unit C /W +1.5 mA Test Conditions TA= 25 oC TA= 0 to 70 oC Specifications of VCE-D85B20 VCSEL Diode VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.25 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.07 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 100 C Operating Temperature -20 70 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCE-D85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCE-D85B20 VCSEL Diode Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCE-E85B20 VCSEL Diode Specifications of VCE-E85B20 VCSEL Diode Model No. VCE-E85B20 Features Picture * Epoxy molded with flat emission surface. * Copper leadframe, good heat dissipation. * Low dependence of power output over temperature. * Driving current between 8 to 15 mA. * Symmetrical beam ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series resistance Rs 40 Beam Divergence 10 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith VF Temperature Coefficient VF/T Min. Typ. Max. 1000 -1.5 C /W +1.5 -3.0 Unit mA mV/C Test Conditions TA= 25 oC TA= 0 to 70 oC TA= 0 to 70 oC, IF=15 mA Specifications of VCE-E85B20 VCSEL Diode Temperature Coefficient /T -0.25 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.07 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 100 C Operating Temperature -20 70 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCE-E85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCE-E85B20 VCSEL Diode Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCE-F85B20 VCSEL Diode Specifications of VCE-F85B20 VCSEL Diode Model No. VCE-F85B20 Features Picture * Epoxy molded with round emission surface. * Copper leadframe, good heat dissipation. * Low dependence of power output over temperature. * Driving current between 8 to 15 mA. * Nominal 4emission angle. * Miniature, ideal for high resolution detection. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series Resistance Rs 40 Beam Divergence 4 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Min. Typ. Max. Unit Test Conditions Specifications of VCE-F85B20 VCSEL Diode TA= 25 oC Thermal Resistance Rth Ith Temperature Variation Ith VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.25 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.07 nm/oC TA= 0 to 70 oC, IF=15 mA 1000 -1.5 C /W +1.5 mA TA= 0 to 70 oC ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 100 C Operating Temperature -20 70 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCE-F85B20 VCSEL Diode Specifications of VCE-F85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 15 mA Fig. 2 Typical Electrical Characteristics Specifications of VCE-F85B20 VCSEL Diode Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-A85B20 VCSEL Diode Specifications of CVT-A85B20 VCSEL Diode Model No. CVT-A85B20 Features Picture * Industry standard TO-46 package with cap lens. * Low dependence of power output over temperature. * Symmetrical beam. * Cost-effective laser light source. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series Resistance Rs 40 Beam Divergence 15 deg IF=15 mA(4) 0.7 mm From the surface of lens Focal Length F Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Thermal Resistance Symbol Rth Min. Typ. 1000 Max. Unit C /W Test Conditions TA= 25 oC Specifications of VCT-A85B20 VCSEL Diode Ith Temperature Variation Ith VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.20 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.06 nm/oC TA= 0 to 70 oC, IF=15 mA -1.5 +1.5 mA TA= 0 to 70 oC ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 120 C Operating Temperature -20 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCT-A85B20 VCSEL Diode Specifications of VCT-A85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 15 mA Fig. 2 Typical Electrical Characteristics Specifications of VCT-A85B20 VCSEL Diode Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-B85B20 VCSEL Diode Specifications of VCT-B85B20 VCSEL Diode Model No. VCT-B85B20 Features Picture * Industry standard TO-46 package with dome lens. * Very low beam divergence without extra optics. * Low dependence of power output over temperature. * Circularly symmetrical beam. * Ideal for applications of long-distance sensing. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series Resistance Rs 40 Beam Divergence 2 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith Min. Typ. Max. 1000 -1.5 Unit C /W +1.5 mA Test Conditions TA= 25 oC TA= 0 to 70 oC Specifications of VCT-B85B20 VCSEL Diode VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.20 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.06 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 120 C Operating Temperature -20 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCT-B85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCT-B85B20 VCSEL Diode Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-F85B20 VCSEL Diode Specifications of VCT-F85B20 VCSEL Diode Model No. VCT-F85B20 Features Picture * Industry standard TO-46 package with flat window glass. * Low dependence of power output over temperature. * Symmetrical beam. * Cost-effective laser light source. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 820 850 870 nm IF=15 mA(2) Output Power Po 1.0 2.0 4.0 mW IF=15 mA Threshold Current Ith 5 10 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.20 mW/mA Forward Voltage VF 2.0 2.2 VBD 10 Breakdown Voltage IF=15 mA(3) V IF=15 mA 15 V IR=10 A IF=15 mA 2.5 Series Resistance Rs 40 Beam Divergence 8 deg IF=15 mA(4) Notes: 1.All parameters except mentioned are measured in I F =15 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(15-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Thermal Resistance Rth Ith Temperature Variation Ith Min. Typ. Max. 1000 -1.5 Unit C /W +1.5 mA Test Conditions TA= 25 oC TA= 0 to 70 oC Specifications of VCT-F85B20 VCSEL Diode VF Temperature Coefficient VF/T -3.0 mV/C TA= 0 to 70 oC, IF=15 mA Temperature Coefficient /T -0.20 %/oC TA= 0 to 70 oC, IF=15 mA p Temperature Coefficient p/T 0.06 nm/oC TA= 0 to 70 oC, IF=15 mA ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 120 C Operating Temperature -20 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 5 seconds Specifications of VCT-F85B20 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCT-F85B20 VCSEL Diode Fig. 3 Spectrum When Driving Current 15 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-A85A40 VCSEL Diode Specifications of CVT-A85A40 High Speed VCSEL Diode Model No. VCT-A85A40 Features Picture * Industry standard TO-46 package with cap lens. * Optimized for fiber optical communication. * Low dependence of electrical and optical characteristic over temperature. * Symmetrical beam. * High coupling efficiency to multi-mode fibers directly. * Speed > 1 GHz. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 830 850 860 nm IF=12 mA(2) Output Power Po 1 2 3 mW IF=12 mA Threshold Current Ith 3 6 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.25 mW/mA Forward Voltage VF 1.7 1.9 VBD 10 Breakdown Voltage IF=12 mA(3) V IF=12 mA 15 V IR=10 A IF=12 mA 2.2 Series Resistance Rs 30 Beam Divergence 15 deg IF=12 mA(4) 0.7 mm From the surface of lens Focal Length F Notes: 1.All parameters except mentioned are measured in I F =12 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(12-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). Specifications of VCT-A85A40 VCSEL Diode THERMAL CHARACTERISTICS: Parameter Symbol Min. Thermal Resistance Rth Ith Temperature Variation Ith -1.0 VF Temperature Coefficient VF/T -3.5 Temperature Coefficient /T p Temperature Coefficient p/T Typ. Max. 900 Unit C /W Test Conditions TA= 25 oC TA= 0 to 70 oC +1.0 mA -2.0 mV/C TA= 0 to 70 oC, IF=12 mA -0.15 %/oC TA= 0 to 70 oC, IF=12 mA 0.06 nm/oC TA= 0 to 70 oC, IF=12 mA -2.5 ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 125 C Operating Temperature -40 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 10 seconds Specifications of VCT-A85A40 VCSEL Diode Specifications of VCT-A85A40 VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current Specifications of VCT-A85A40 VCSEL Diode If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-A85A4X VCSEL Diode Specifications of VCT-A85A4X High Speed VCSEL Diode Model No. VCT-A85A4X Features Picture * Industry standard TO-46 package with cap lens. * Optimized for fiber optical communication. * With attenuating coating and monitoring PD. * Low dependence of electrical and optical characteristic over temperature. * Symmetrical beam. * High coupling efficiency to multi-mode fibers directly. * Speed > 1 GHz. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 830 850 860 nm IF=12 mA(2) Output Power Po 1 2 3 mW IF=12 mA Threshold Current Ith 3 6 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.25 mW/mA Forward Voltage VF 1.7 1.9 VBD 10 Breakdown Voltage IF=12 mA(3) V IF=12 mA 15 V IR=10 A IF=12 mA 2.2 Series Resistance Rs 30 Beam Divergence 16 deg IF=12 mA(4) Monitor Current IM A VR=5 V, Po = 1.5 mW Focal Length F mm From the surface of lens 30 100 0.7 Notes: 1.All parameters except mentioned are measured in I F =12 mA, 25C, CW. 300 Specifications of VCT-A85A4X VCSEL Diode 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(12-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Min. Thermal Resistance Rth Ith Temperature Variation Ith -1.0 VF Temperature Coefficient VF/T -3.5 Temperature Coefficient /T p Temperature Coefficient p/T Typ. Max. 900 Unit C /W Test Conditions TA= 25 oC TA= 0 to 70 oC +1.0 mA -2.0 mV/C TA= 0 to 70 oC, IF=12 mA -0.15 %/oC TA= 0 to 70 oC, IF=12 mA 0.06 nm/oC TA= 0 to 70 oC, IF=12 mA -2.5 ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 125 C Operating Temperature -40 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 10 seconds PINOUT: VCT-A85A42 VCT-A85A41 Specifications of VCT-A85A4X VCSEL Diode Specifications of VCT-A85A4X VCSEL Diode Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current Specifications of VCT-A85A4X VCSEL Diode If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-F85A40 VCSEL Diode for Data Communication Specifications of VCT-F85A40 High Speed VCSEL Diode Model No. VCT-F85A40 Features Picture * Industry standard TO-46 package with flat window glass. * Optimized for fiber optical communication. * Low dependence of electrical and optical characteristic over temperature. * Symmetrical beam. * High coupling efficiency to multi-mode fibers. * Speed > 1 GHz. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 830 850 860 nm IF=12 mA(2) Output Power Po 1 2 3 mW IF=12 mA Threshold Current Ith 3 6 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.25 mW/mA Forward Voltage VF 1.7 1.9 VBD 10 Breakdown Voltage IF=12 mA(3) V IF=12 mA 15 V IR=10 A IF=12 mA 2.2 Series Resistance Rs 30 Beam Divergence 8 deg Notes: 1.All parameters except mentioned are measured in I F =12 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(12-Ith ) at 25C. 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). IF=12 mA(4) Specifications of VCT-F85A40 VCSEL Diode for Data Communication THERMAL CHARACTERISTICS: Parameter Symbol Min. Thermal Resistance Rth Ith Temperature Variation Ith -1.0 VF Temperature Coefficient VF/T -3.5 Temperature Coefficient /T p Temperature Coefficient p/T Typ. Max. 900 Unit C /W Test Conditions TA= 25 oC TA= 0 to 70 oC +1.0 mA -2.0 mV/C TA= 0 to 70 oC, IF=12 mA -0.15 %/oC TA= 0 to 70 oC, IF=12 mA 0.06 nm/oC TA= 0 to 70 oC, IF=12 mA -2.5 ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 125 C Operating Temperature -40 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 10 seconds Specifications of VCT-F85A40 VCSEL Diode for Data Communication Specifications of VCT-F85A40 VCSEL Diode for Data Communication Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCT-F85A40 VCSEL Diode for Data Communication Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of VCT-F85A4X VCSEL Diode with PD for Data Communication Specifications of VCT-F85A4X High Speed VCSEL Diode Model No. VCT-F85A4X Features Picture * Industry standard TO-46 package with flat window glass. * Optimized for fiber optical communication. * With attenuating coating and monitoring PD. * Low dependence of electrical and optical characteristic over temperature. * Symmetrical beam. * High coupling efficiency to multi-mode fibers. * Speed > 1 GHz. ELECTRO-OPTICAL CHARACTERISTICS: (Tc=25C) Parameter Test Conditions(1) Symbol Min. Typ. Max. Unit Lasing Wavelength p 830 850 860 nm IF=12 mA(2) Output Power Po 1 2 3 mW IF=12 mA Threshold Current Ith 3 6 mA CW Operating Current Iop 12 mA Adjustable to establish 1.5 mW output power Slope Efficiency 0.25 mW/mA Forward Voltage VF 1.7 1.9 VBD 10 Breakdown Voltage IF=12 mA(3) V IF=12 mA 15 V IR=10 A IF=12 mA 2.2 Series Resistance Rs 30 Beam Divergence 8 deg IF=12 mA(4) Monitor Current IM A VR=5 V, Po = 1.5 mW 50 100 Notes: 1.All parameters except mentioned are measured in I F =12 mA, 25C, CW. 2.Higher power can be provided under request. 3.Slope efficiency are defined as P/(12-Ith ) at 25C. 300 Specifications of VCT-F85A4X VCSEL Diode with PD for Data Communication 4.Beam divergence is defined as the light intensity Full Width at its Half Maxima (FWHM). THERMAL CHARACTERISTICS: Parameter Symbol Min. Thermal Resistance Rth Ith Temperature Variation Ith -1.0 VF Temperature Coefficient VF/T -3.5 Temperature Coefficient /T p Temperature Coefficient p/T Typ. Max. 900 Unit C /W Test Conditions TA= 25 oC TA= 0 to 70 oC +1.0 mA -2.0 mV/C TA= 0 to 70 oC, IF=12 mA -0.15 %/oC TA= 0 to 70 oC, IF=12 mA 0.06 nm/oC TA= 0 to 70 oC, IF=12 mA -2.5 ABSOLUTE MAXIMUM RATINGS: Parameter Min. Max. Unit Storage Temperature -40 125 C Operating Temperature -40 85 C Lead Solder Temperature 260 C Continuous Forward Current 40 mA Continuous Reverse Voltage 10 V OUTLINE DIMENSIONS: Unit: mm Test Conditions 10 seconds PINOUT: VCT-F85A42 VCT-F85A41 Specifications of VCT-F85A4X VCSEL Diode with PD for Data Communication Specifications of VCT-F85A4X VCSEL Diode with PD for Data Communication Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Specifications of VCT-F85A4X VCSEL Diode with PD for Data Communication Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page General Information and Services VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | General Information and Services Manufacturer of O.E.M. and O.D.M. laser diode modules and products Supplier of laser accessories Marketing and consulting services LASERMATE CORPORATION manufactures green, red, & infrared laser diode modules & products, including laser diode modules, diode pumped solid-state green laser, laser aimers, and laser pointers, as well as fiber optic components & products, including pigtailed & receptacle communication laser diodes and VCSEL (or Vertical Cavity Surface Emitting Laser) diodes as optical transmitters, connectorized photodiodes as optical receivers, and integrated optical transmitters and receivers as fiber optical transceivers for data communication. We also supply laser diodes, photodiode detectors, optics, diffractive optics, laser safety goggles, and diode driver circuit boards. Green, Red & Infrared Laser Diode Modules Fiber Optic Components & Products Green, Red & Infrared Laser Diode Modules: We specialize in providing high quality and low cost laser diode modules for O.E.M. users and O.D.M customers. We now have available visible red and invisible infrared laser diode modules with circular, elliptical, linear, and cross hair beam profiles in variety of packages and configurations offering at very competitive prices. Our laser modules are fully self-contained with laser diode, optics, and power supply. More than 100 types of O.E.M. laser diode modules have been designed and manufactured for our customers. We would like to introduce to you five types of O.E.M. laser diode modules to fulfill your needs. General Information and Services Red & Infrared laser diode modules designed for the OEM, they are ideal for a wide range of low power laser applications such as positioning, alignment, measurement, and robotics control. To assure the quality, the LT-series laser diode modules have passed 24 hours burn-in test. Diode pumped solid state green lasers are our new products. Green lasers with 532nm wavelength are available in terms of green laser module and green laser system to satisfy our customers' demands. We provide laser modules with a wide range of wavelength from 532nm (green) to 850nm (infrared), output power up to 250mW, great circuitry design, and dimensions from 6mm diameter x 17mm length to17mm diameter x 63mm length to fulfill your needs. If our products do not fulfill your needs, please let us know. We are equipped to take the O.E.M. order to fit your specific requirements. Fiber Optic Components & Products: We provide fiber optic components & products, including pigtailed & receptacle 1310 nm & 1550 nm communication laser diodes and 850 nm VCSEL (or Vertical Cavity Surface Emitting Laser) diodes as fiber optical transmitters, connectorized photodiodes as optical receivers, and integrated optical transmitters and receivers as fiber optical transceivers for 100 Mbps Fast Ethernet transceiver, 155 Mbps ATM transceiver, 622 Mbps ATM OC-12, 1.0625 Gbps Fiber Channel & 1.25 Gbps Gigabit Ethernet transceiver. VCSEL (Vertical Cavity Surface Emitting Laser) (MTTF >1,100 years @ 25oC) Connectorized (Pigtailed or Receptacle) Communication 1310nm & 1550 nm Laser Diodes Connectorized 850nm VCSEL Diodes in FC, SC & ST Connectors Connectorized GaAs & InGaAs PIN Photodiode Detectors The 850nm VCSEL multimode SC & ST duplex fiber optical transceiver with 155 Mb/s and the industrial standard 1 x 9 footprint is useful for short distance, up to 2 km, data communication applications. The 1310 nm and 1550 nm single mode SC, ST & FC duplex fiber laser optical transceivers from 155 Mb/s to 1.25Gb/s data rate and the industrial standard 1 x 9 footprint are useful for longer distance, up to 50 km General Information and Services transmission distance. Fiber Optical Transceivers for Data Communication & Telecommunication If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Red & Infrared Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Red & Infrared Laser Diode Modules We specialize in manufacturing high quality and low cost laser diode modules for O.E.M. users. We now have available visible red and invisible infared laser diode modules with circular, elliptic, linear, and cross hair beam profiles in variety of packages and configurations offering at very competitive prices. Our laser modules are fully self-contained with laser diode, optics, and power supply. More than 100 types of O.E.M. laser diode modules have been designed and manufactured for our customers. From general sighting applications to OEM projects, we absolutely meet your cost-performance requirements. We provide laser diode modules with Wavelength: from 635 nm to 850 nm Output power: up to 250 mW Beam profile: circular, elliptic, linear (45, 60 & 90 degree), and cross hair Circuit design: APC, ACC, pulsed, analog modulation, and TTL modulation Dimensions: from 6 (dia.) x 17 mm (L) to 17 (dia.) x 63 mm (L) MTTF: 10,000 hours for most Class II and Class IIIa lasers Prices: highly competitive to fulfill your needs. If our products do not fulfill your needs, please let us know. We are equipped to take the O.E.M. order to fit your specific requirements. Red & Infrared Laser Diode Modules Models We would like to introduce to you the following laser diode modules to fulfill your professional needs. A: Circular and Elliptical Beam Laser Diode Modules B: Line Generating Laser Diode Module LT- series high performance laser diode module LT- series line generating laser diode module LX- series high performance laser diode module LX- series line generating laser diode module LJ-series prime laser diode module LM-series compact laser diode module PL-series minitural laser diode module C: Cross Hair Generating Laser Diode Module D: Analog and TTL Modulatable Laser Diode Modules LM- series cross hair generating laser diode module Analog modulatable LT- series laser modules LT- series cross hair generating laser diode module TTL modulatable LT- series laser modules Analog Modulatable LJ- series laser modules TTL Modulatable LJ- series laser modules Quality All LT- series laser diode modules have passed 24 hours burn-in test to assure their quality. Applications Designed for the OEM, our laser modules are ideal for a wide range of low power laser applications such as positioning, alignment, measurement, bar code reader, and robotic control. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | LT-Series Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | High Performance Laser Diode Modules - LT System The LT laser diode module system is a complete laser diode system designed for OEM applications with adjustable output power and beam focusing requirements. It is designed as the high quality and performance laser diode module with flexible and adjustable characteristics for industrial heavy duty users. Designed for the OEM, it is ideal for a wide range of low power laser applications, especially in continuous long time usage such as bar code LT-Series Laser Diode Modules reader, measurement, alignment, and positioning. Features High Performance and Low Cost Wide Range of Wavelength (635nm 850nm) and Output power (0.9mW 50mW) Adjustable Optical Output Power and Automatic Power Control Soft-start, Short-circuit, and Reverse-polarity Protections Two High Performance Collimating Lenses for Your Choice Adjustable Focus Super Fine Pitch (0.25mm) for Precision Focusing Standard English Dimension (Dia. = 0.5 in., L = 2.0 in.) Line Generating Optics and Compact Beam Expander for Options Green LED Indicator LT-Series Laser Diode Modules Please click the item of interest below for more information. Specifications of LT- laser modules Specifications of analog modulatable LT- laser modules Specifications of TTL modulatable & variable power LT- laser modules Accessory options for LT- laser modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Brief in VCSEL VCSEL (Vertical Cavity Surface Emitting Laser) Introduction VCSEL, or Vertical Cavity Surface Emitting Laser, is semiconductor microlaser diode that emits light in a cylindrical beam vertically from the surface of a fabricated wafer, and offers significant advantages when compared to the edge-emitting lasers currently used in the majority of fiber optic communications devices. VCSELs can be fabricated efficiently on a 3-inch diameter wafer. Even more important, the ability to manufacture these lasers using standard microelectronic fabrication method allows integration of VCSELs on-board with other components without requiring pre-packaging. As an enabling technology, VCSELs allow superior new systems and products to be created at a lower cost. We provides VCSELs and GaAs, InGaAs and Silicon PIN photodiodes for applications in fiber-optic communication and general industry. Generally we can deliver products of VCSEL chip, diode, transmitter/receiver assembly, and transceiver module, in large volume or small quantity for engineering purpose. We provide cost-effective products to customers for promoting the price and quality competition of their products. 780nm & 850nm VCSEL Diodes Receptacle VCSEL Diodes (or Prealigned VCSEL Transmitters) VCSEL Transceiver Modules Fully Compatible with Brand Name's Transceivers Advantages Brief in VCSEL VCSELs have high performance and low cost advantages. The key features are: 1) The structure can be integrated in two-dimensional array configuration. 2) Low threshold currents enable high-density arrays. 3) Surface-normal emission and nearly identical to the photo detector geometry give easy alignment and packaging. 4) Circular and low divergence output beams eliminate the need for corrective optics. 5) Passive versus active fiber alignment, combined with high fiber-coupling efficiency. 6) Low-cost potential because the devices are completed and tested at the wafer level. 7) Lower temperature-sensitivity compared to edge-emitting laser diodes. 8) High transmission speed with low power consumption. VCSEL Diodes Receptacle VCSEL Diodes (or Prealigned VCSEL Transmitters) Applications Our VCSELs are promising emitter for fiber data communication in the speed range of 100Mbs and 1Gbs. They enable high performance systems in Gigabit Ethernet, Fiber Channel, and ATM markets. Through their integration with original equipment manufacturer's (OEM) systems design, our 850nm VCSELs provide enhanced performance benefits to a variety of applications, such as local area networks(LAN), telecommunication switches, optical storage and other optoelectronic systems. We maintains close coordination with OEMs to assist in the design with VCSEL components and sub-assemblies to develop new products and to meet customer|s need. VCSEL Diodes Receptacle VCSEL Diodes (or Prealigned VCSEL Transmitters) If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Brief in VCSEL Return to Lasermate Corporation Home Page Receptacle VCSEL Diodes (or Prealigned VCSEL transmitters) Prealigned 850 nm VCSEL transmitters: Connectorized VCSEL Diodes in FC, SC & STTM* Receptacles Infrared 850 nm wavelength, circular laser beam, <6.0 mA low threshold current, highly stable to temperature variation. The prealigned, lensed package and industry standard STTM*, FC style connector or SC style connector sleeve. Allowing fiber connection directly or plug-in assembly to reduce manufacturing cost. Suitable to high-speed data communication, LAN, ATM, fast ethernet, fiber channel application. In compliance with Class I laser standard for the eye safety. * STTM is a trade mark registered by AT&T. Please click the Model No. for the detail specifications. MODEL NO. PACKAGE DESCRIPTION Metallic ST connector with attenuating coating & TST-M85A4X monitoring PD for 100/155/622/1250 Mbps applications TST-M85A40 TST-M85B205 & TST-M85B206 Metallic ST connector for 100/155/622/1250 Mbps applications Metallic ST connector with lead frame pin out for 10/100/155 Mbps applications PICTURE Receptacle VCSEL Diodes (or Prealigned VCSEL transmitters) Plastic ST connector with attenuating coating & TST-P85A4X monitoring PD for 100/155/622/1250 Mbps applications TST-P85B205 & Plastic ST connector with metal pin out TST-P85B206 for10/100/155 Mbps applications Metallic FC connector with attenuating coating & TFC-M85A4X monitoring PD for 100/155/622/1250 Mbps applications TFC-M85A40 Metallic FC connector for 100/155/622/1250 Mbps applications TFC-M85B205 & Metallic FC connector with lead frame pin out TFC-M85B206 for10/100/155 Mbps applications Mtallic SC connector with attenuating coating & TSC-M85A4X monitoring PD for 100/155/622/1250Mbps applications If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode with monitoring photodiode in ST receptacle Specifications of TST-M85A4X5 & TST-M85A4X6: Pre-aligned 850 nm VCSEL in ST Connector Features: Industry standard connector of matallic ST-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. With attenuating coating and monitoring PD. Two laser/photodiode polarities. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number MIN TYP 3 -10 850 Breakdown Voltage VBD 10 Monitor Current Im Rise/Fall Time (20%~80%) TR/TF 30 IF =12 mA(3) IF =12 mA 0.85 nm IF =12 mA 2.3 1.9 dBm Adjustable to establish Po nm 4 1.7 mA 860 3 VF TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -4 Forward Voltage Series Resistance 6 12 2 Rs MAX IF =12 mA V IF =12 mA 15 V IR =10 A 30 IF =12 mA A VR = 5 V, Po = -4dBm ps TA = 25 C, Extinction Ratio > 10 dB 100 130/200 300 Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TST-M85A4X5 is the product type for 50/125 m MMF and TST-M85A4X6 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850nm VCSEL diode with monitoring photodiode in ST receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1 Forward Voltage Temperature Coefficient VF /T Thermal Resistance TYP MAX 900 -3.5 C/W 1 -2.5 UNIT -2.0 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C mV/C TA = 0 ~ 70C Temperature Coefficient /T -0.15 %/C Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 85 260 40 10 UNIT C C C mA V TEST CONDITIONS 10 seconds PINOUT: TST-M85A415 & TST-M85A416 TST-M85A425 & TST-M85A426 850nm VCSEL diode with monitoring photodiode in ST receptacle 850nm VCSEL diode with monitoring photodiode in ST receptacle Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current 850nm VCSEL diode with monitoring photodiode in ST receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode in ST receptacle Specifications of TST-M85A405 & TST-M85A406: Pre-aligned 850 nm VCSEL in ST Connector Features: Industry standard connector of matallic ST-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number MIN TYP 3 mA -4 dBm 830 850 2 nm IF =12 mA 0.85 nm IF =12 mA IF =12 mA 4 2.3 1.9 Breakdown Voltage VBD 10 IF =12 mA(3) 860 3 1.7 Adjustable to establish Po mW/mA IF =12 mA(4) 0.1 VF Rise/Fall Time (20%~80%) mA 12 -10 TEST CONDITIONS(1) UNIT 6 Forward Voltage Series Resistance MAX V IF =12 mA 15 V IR =10 A Rs 30 IF =12 mA TR/TF 130/200 ps TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TST-M85A405 is the product type for 50/125 m MMF and TST-M85A406 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. Thermal Characteristics: PARAMETERS Thermal Resistance Threshold Current Temperature Variation SYMBOL Rth MIN th -1 TYP MAX 900 UNIT C/W 1 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C 850nm VCSEL diode in ST receptacle Forward Voltage Temperature Coefficient VF /T -3.5 -2.5 mV/C TA = 0 ~ 70C -2.0 Temperature Coefficient /T -0.15 %/C Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 85 260 40 10 UNIT C C C mA V TEST CONDITIONS 10 seconds PINOUT: TST-M85A405 & TST-M85A406 Pin 1. Anode Pin 2. NC Pin 3. Cathode Pin 4. Case 850nm VCSEL diode in ST receptacle Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics 850nm VCSEL diode in ST receptacle Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850 nm VCSEL in metal ST receptacle Specifications of TST-M85B205 & TST-M85B206: Pre-aligned 850 nm VCSEL in ST Connector Features: Industry standard connector of matallic ST-type receptacle. Pre-aligned for multi-mode fiber communication. Copper leadframe, low dependence of thermal variation. Solution of 10/100/155 Mbps applications. LED transmitter alternative. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL MIN Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number VF Breakdown Voltage VBD Rise/Fall Time (20%~80%) MAX 3 6 12 -10 850 1.7 mA dBm Adjustable to establish Po IF =12 mA(3) 860 nm IF =12 mA 0.85 nm IF =12 mA 3 4 1.9 2.3 10 TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -15 2 Forward Voltage Series Resistance TYP 15 IF =12 mA V IF =12 mA V IR =10 A Rs 40 IF =12 mA TR/TF 200/300 ps TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TST-M85B205 is the product type for 50/125 m MMF and TST-M85B206 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 0 to -4 dBm and from -4 to -10 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850 nm VCSEL in metal ST receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1.5 Forward Voltage Temperature Coefficient VF /T -3.0 Temperature Coefficient /T -0.25 %/C TA = 0 ~ 70C, IF=12 mA Wavelength Temperature Coefficient p/T 0.07 nm/C TA = 0 ~ 70C, IF=12 mA Thermal Resistance TYP MAX UNIT TEST CONDITIONS C/W TA = 25C 900 1.5 mA TA = 0 ~ 70C -3.5 mV/C TA = 0 ~ 70C Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 70 260 40 10 UNIT C C C mA V CONDITIONS 5 seconds 850 nm VCSEL in metal ST receptacle Fig. 1 Typical Optical Characteristics 850 nm VCSEL in metal ST receptacle Fig. 2 Typical Electrical Characteristics 850 nm VCSEL in metal ST receptacle Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current 850 nm VCSEL in metal ST receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode with monitoring photodiode in ST receptacle Specifications of TST-P85A4X5 & TST-P85A4X6: Pre-aligned 850 nm VCSEL in ST Connector Features: Industry standard connector of plastic ST-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. With attenuating coating and monitoring PD. Three laser/photodiode polarities. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number TYP VF Breakdown Voltage VBD Series Resistance Rs Monitor Current Im TR/TF MAX 3 6 12 -4 850 1.7 dBm Adjustable to establish Po IF =12 mA(3) nm IF =12 mA 0.85 nm IF =12 mA 4 1.9 2.2 15 30 30 mA 860 3 10 TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -9.5 2 Forward Voltage Rise/Fall Time (20%~80%) MIN 100 130/230 300 IF =12 mA V IF =12 mA V IR =10 A IF =12 mA A VR = 5 V, Po = -4dBm ps TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TST-P85A4X5 is the product type for 50/125 m MMF and TST-P85A4X6 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850nm VCSEL diode with monitoring photodiode in ST receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1 Forward Voltage Temperature Coefficient VF /T Thermal Resistance TYP MAX 900 -3.5 UNIT C/W 1 -2.5 -2.0 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C mV/C TA = 0 ~ 70C Temperature Coefficient /T -0.15 %/C Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 85 260 40 10 UNIT C C C mA V TEST CONDITIONS 10 seconds PINOUT: TST-P85A415 & TST-P85A416 TST-P85A425 & TST-P85A426 850nm VCSEL diode with monitoring photodiode in ST receptacle 850nm VCSEL diode with monitoring photodiode in ST receptacle Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current 850nm VCSEL diode with monitoring photodiode in ST receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850 nm VCSEL in Plastic ST receptacle Specifications of TST-P85B205 & TST-P85B206: Pre-aligned 850 nm VCSEL in Plastic ST Connector Features: Industry standard connector of plastic ST * -type receptacle. Pre-aligned for multi-mode fiber communication. Copper leadframe, low dependence of thermal variation. Solution of 10/100/155 Mbps applications. Cost-effective LED transmitter alternative. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL MIN Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number VF Breakdown Voltage VBD Series Resistance Rise/Fall Time (10%~90%) Rs TR/TF MAX UNIT 3 6 mA 12 -15 mA -10 820 1.7 10 850 dBm TEST CONDITIONS(1) Adjustable to establish Po IF =12 mA(3) mW/mA IF =12 mA(4) 0.1 2 Forward Voltage TYP 870 nm IF =12 mA 0.85 nm IF =12 mA IF =12 mA 3 4 2.0 2.3 15 40 1 V IF =12 mA V IR =10 A IF =12 mA ns TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TST-P85B205 is the product type for 50/125 m MMF and TST-P85B206 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 0 to -4 dBm and from -4 to -10 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850 nm VCSEL in Plastic ST receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1.5 Forward Voltage Temperature Coefficient VF /T -3.0 Temperature Coefficient /T -0.25 %/C TA = 0 ~ 70C, IF=12 mA Wavelength Temperature Coefficient p/T 0.07 nm/C TA = 0 ~ 70C, IF=12 mA Thermal Resistance TYP MAX UNIT TEST CONDITIONS C/W TA = 25C 900 1.5 mA TA = 0 ~ 70C -3.5 mV/C TA = 0 ~ 70C Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 70 260 40 10 UNIT C C C mA V CONDITIONS 10 seconds 850 nm VCSEL in Plastic ST receptacle Fig. 1 Typical Optical Characteristics 850 nm VCSEL in Plastic ST receptacle Fig. 2 Typical Electrical Characteristics 850 nm VCSEL in Plastic ST receptacle Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current 850 nm VCSEL in Plastic ST receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode with monitoring photodiode in FC receptacle Specifications of TFC-M85A4X5 & TFC-M85A4X6: Pre-aligned 850 nm VCSEL in FC Connector Features: Industry standard connector of matallic FC-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. With attenuating coating and monitoring PD. Three laser/photodiode polarities. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) MIN VF Breakdown Voltage VBD Series Resistance Rs Monitor Current Im Rise/Fall Time (20%~80%) TR/TF MAX 3 6 12 -4 850 2 3 1.7 1.9 10 mA dBm Adjustable to establish Po IF =12 mA(3) 860 nm IF =12 mA 0.85 nm IF =12 mA IF =12 mA 2.2 15 30 30 TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -9.5 Transverse Mode Number Forward Voltage TYP 100 130/230 300 V IF =12 mA V IR =10 A IF =12 mA A VR = 5 V, Po = -4dBm ps TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TFC-M85A4X5 is the product type for 50/125 m MMF and TFC-M85A4X6 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850nm VCSEL diode with monitoring photodiode in FC receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1 Forward Voltage Temperature Coefficient VF /T Thermal Resistance TYP MAX 900 -3.5 UNIT C/W 1 -2.5 -2.0 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C mV/C TA = 0 ~ 70C Temperature Coefficient /T -0.15 %/C Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 85 260 40 10 UNIT C C C mA V PINOUT: TFC-M85A415 & TFC-M85A416 TEST CONDITIONS 10 seconds TFC-M85A425 & TFC-M85A426 850nm VCSEL diode with monitoring photodiode in FC receptacle 850nm VCSEL diode with monitoring photodiode in FC receptacle Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current 850nm VCSEL diode with monitoring photodiode in FC receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode in FC receptacle Specifications of TFC-M85A405 & TFC-M85A406: Pre-aligned 850 nm VCSEL in FC Connector Features: Industry standard connector of matallic FC-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) MIN VF Breakdown Voltage VBD Rise/Fall Time (20%~80%) mA 12 mA -9.5 -4 dBm 850 1.7 nm IF =12 mA 0.85 nm IF =12 mA IF =12 mA V IF =12 mA V IR =10 A 30 IF =12 mA 130/230 ps TA = 25 C, Extinction Ratio > 10 dB 10 TR/TF IF =12 mA(3) 860 3 1.9 Rs Adjustable to establish Po mW/mA IF =12 mA(4) 0.1 830 TEST CONDITIONS(1) UNIT 6 2 Forward Voltage MAX 3 Transverse Mode Number Series Resistance TYP 2.2 15 Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TFC-M85A405 is the product type for 50/125 m MMF and TFC-M85A406 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. Thermal Characteristics: PARAMETERS Thermal Resistance Threshold Current Temperature Variation SYMBOL Rth MIN th -1 TYP MAX 900 UNIT C/W 1 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C 850nm VCSEL diode in FC receptacle Forward Voltage Temperature Coefficient VF /T -3.5 -2.5 -2.0 mV/C TA = 0 ~ 70C Temperature Coefficient /T -0.15 %/C Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 PINOUT: TFC-M85A405 & TFC-M85A406 Pin 1. Anode Pin 2. NC Pin 3. Cathode Pin 4. Case MAX 100 85 260 40 10 UNIT C C C mA V TEST CONDITIONS 10 seconds 850nm VCSEL diode in FC receptacle 850nm VCSEL diode in FC receptacle Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current 850nm VCSEL diode in FC receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850 nm VCSEL in FC receptacle Specifications of TFC-M85B205 & TFC-M85B206: Pre-aligned 850 nm VCSEL in FC Connector Features: Industry standard connector of matallic FC-type receptacle. Pre-aligned for multi-mode fiber communication. Copper leadframe, low dependence of thermal variation. Solution of 10/100/155 Mbps applications. Cost-effective LED transmitter alternative. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL MIN Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) Transverse Mode Number VF Breakdown Voltage VBD Rise/Fall Time (20%~80%) Rs TR/TF MAX 3 6 12 -10 850 1.7 mA dBm Adjustable to establish Po IF =12 mA(3) 860 nm IF =12 mA 0.85 nm IF =12 mA 3 4 1.9 2.3 10 TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -15 2 Forward Voltage Series Resistance TYP 15 40 1 IF =12 mA V IF =12 mA V IR =10 A IF =12 mA ns TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TFC-M85B205 is the product type for 50/125 m MMF and TFC-M85B206 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 0 to -4 dBm and from -4 to -10 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850 nm VCSEL in FC receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1.5 Forward Voltage Temperature Coefficient VF /T -3.0 Temperature Coefficient /T -0.25 %/C TA = 0 ~ 70C, IF=12 mA Wavelength Temperature Coefficient p/T 0.07 nm/C TA = 0 ~ 70C, IF=12 mA Thermal Resistance TYP MAX UNIT TEST CONDITIONS C/W TA = 25C 900 1.5 mA TA = 0 ~ 70C -3.5 mV/C TA = 0 ~ 70C Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 70 260 40 10 UNIT C C C mA V CONDITIONS 10 seconds 850 nm VCSEL in FC receptacle Fig. 1 Typical Optical Characteristics 850 nm VCSEL in FC receptacle Fig. 2 Typical Electrical Characteristics 850 nm VCSEL in FC receptacle Fig. 3 Spectrum When Driving Current 12 mA Fig. 4 Temperature Dependence of Threshold Current 850 nm VCSEL in FC receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 850nm VCSEL diode with monitoring photodiode in SC receptacle Specifications of TSC-M85A4X5 & TSC-M85A4X6: Pre-aligned 850 nm VCSEL in SC Connector Features: Industry standard connector of matallic SC-type receptacle. Pre-aligned for multi-mode fiber communication. High stability to temperature variation. With attenuating coating and monitoring PD. Three laser/photodiode polarities. Solution of 100/155/622/1250 Mbps applications. Alternative solution for LED transmitter. In compliance with Class I laser standard for the eye safety. Electro-optical Characteristics: PARAMETERS Threshold Current SYMBOL Ith Operating Current Iop Power Coupled Power (50/125, 62.5/125m MMF)(2) Po Slope Efficiency Wavelength p Spectral Width (RMS) MIN VF Breakdown Voltage VBD Series Resistance Rs Monitor Current Im Rise/Fall Time (20%~80%) TR/TF MAX 3 6 12 -4 3 1.7 1.9 10 dBm Adjustable to establish Po IF =12 mA(3) nm IF =12 mA 0.85 nm IF =12 mA IF =12 mA 2.2 15 40 30 mA 860 850 2 TEST CONDITIONS(1) mW/mA IF =12 mA(4) 0.1 830 UNIT mA -9.5 Transverse Mode Number Forward Voltage TYP 100 130/230 300 V IF =12 mA V IR =10 A IF =12 mA A VR = 5 V, Po = -4dBm ps TA = 25 C, Extinction Ratio > 10 dB Note: 1. All parameters except mentioned are measured in IF =12 mA, 25C, CW. 2. TSC-M85A4X5 is the product type for 50/125 m MMF and TSC-M85A4X6 is the product type for 62.5/125 m MMF. 3. Specific power range, such as from 2 to -4 dBm and from -12 to -17 dBm, can be provided under request. 4. Slope efficiency is definded asP/(12-Ith) at 25 C. 850nm VCSEL diode with monitoring photodiode in SC receptacle Thermal Characteristics: PARAMETERS SYMBOL Rth MIN Threshold Current Temperature Variation th -1 Forward Voltage Temperature Coefficient VF /T Thermal Resistance TYP MAX UNIT 900 -3.5 C/W 1 mA TEST CONDITIONS TA = 25C TA = 0 ~ 70C mV/C TA = 0 ~ 70C -2.5 Temperature Coefficient /T -0.15 %/C TA = 0 ~ 70C, IF=12 mA Wavelength Temperature Coefficient p/T 0.06 nm/C TA = 0 ~ 70C, IF=12 mA Absolute Maximum Ratings: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage OUTLINE DIMENSIONS: Unit: mm MIN -40 -20 MAX 100 85 260 40 10 PINOUT: TSC-M85A415 & TSC-M85A416 UNIT C C C mA V TEST CONDITIONS 10 seconds TSC-M85A425 & TSC-M85A426 850nm VCSEL diode with monitoring photodiode in SC receptacle 850nm VCSEL diode with monitoring photodiode in SC receptacle Fig. 1 Typical Optical Characteristics Fig. 3 Spectrum When Driving Current 12 mA Fig. 2 Typical Electrical Characteristics Fig. 4 Temperature Dependence of Threshold Current 850nm VCSEL diode with monitoring photodiode in SC receptacle If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page High Performance & Low Cost Short Wavelength VCSEL Transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | High Performance & Low Cost Short Wavelength 850nm VCSEL Transceivers from 100 Mbps Fast Ethernet to 1.25 Gbps Gigabit Ethernet Fully compatible with brand name's transceivers. Using 850 nm VCSEL transmitter & GaAsPIN or InGaAs PIN receiver. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC and ST connectors In compliance with Class I laser standard for the eye safety. High performance and low cost. Suitable to high-speed data communications such as Fast Ethernet, LAN, ATM, Fiber Channel, Gigabit Ethernet applications. 100 Mbps Fast Ethernet Transceiver 155 Mbps ATM Multimode Fiber Transceiver 1.062 Gbps Fiber Channel Transceiver 1.25 Gbps Gigabit Ethernet Transceiver Please click the Model No. for the detail specifications. MODEL NO. DESCRIPTION 100 Mbps Fast Ethernet Transceiver C85-100MC1A Only $59.00 for one Fully compatible with 1300 nm optical links and brand name's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 1300 nm InGaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Driving up to 2 km link distance for multimode optical fiber. High performance and low cost. COMPATIBLE TO Hewlett-Packer: HFBR-5103 AMP: 269040-1 269081-1 SUMITOMO: SDM4201 High Performance & Low Cost Short Wavelength VCSEL Transceiver 100 Mbps Fast Ethernet Transceiver C85-100MC8A Fully compatible with 850 nm optical links and brand name's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 850 nm GaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Driving up to 2 km link distance for multimode optical fiber. High performance and low cost. 155 Mbps ATM Multimode Fiber Transceiver Hewlett-Packer: HFBR-5205 SUMITOMO: SDM4201 Fully compatible with 1300 nm optical links and brand name's transceivers. 50 % power saving than LED transceivers. C85-155MC1A Consisting of 850 nm VCSEL transmitter & 1300 nm InGaAs PIN receiver. Only $59.00 for one Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Driving up to 2 km for multimode optical fiber. High performance and low cost. 155 Mbps ATM Multimode Fiber Transceiver C85-155MC8A Fully compatible with 850 nm optical links and brand name's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 850 nm GaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Driving up to 2 km link distance for multimode optical fiber. High performance and low cost. High Performance & Low Cost Short Wavelength VCSEL Transceiver 1.062 Gbps Fiber Channel Transceiver C85-125GC8A Fully compatible with 850 nm optical links. Consisting of 850 nm VCSEL transmitter & 850 nm GaAs PIN receiver. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Driving up to 500 m for multimode optical fiber. High performance and low cost. 1.25 Gbps Gigabit Ethernet Transceiver C85-125GC8A Fully compatible with 850 nm optical links. Consisting of 850 nm VCSEL transmitter & 850 nm GaAs PIN receiver. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. 220m & 500m link distance for 62.5/125 & 50/125 mm MMF, respectively. High performance and low cost. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | C85100MC1A VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | C85-100M-C1A High Performance & Low Cost 100Mbps Fast Ethernet Multimode Fiber Transceiver Using 850nm VCSEL Transmitter & 1300 nm InGaAs PIN receiver for FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style FEATURES Fully compatible with 1300 nm optical links and various brand name's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 1300 nm InGaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Class I Laser Safe per FDA and IEC 2 km link distance for multimode optical fiber. High performance and low cost. DESCRIPTION The C85-100M-C1A fast ethernet transceiver from Lasermate is a 100Mbps/125MBd fiber optic transceiver module in the new industry standard 1x 9 SIP package style with a duplex SC connector interface. This transceiver is designed to meet the standard 2,000 m distance requirement. It provides a low cost solution to the requirements of Fast Ethernet interconnects. It is a class I laser product compliant with FDA Radiation Performance Standards, 21 CFR Subchapter J, as well as International Safety Standard IEC-825-1. Typical applications include: LANs (Local Area Networks), clustered workstation links, and connections to mass storage devices. The C85-100M-C1A transceiver has an independent Transmitter (TX) and Receiver (RX). The transmitter consists of a high reliability 850nm VCSEL (Vertical Cavity Serface Emitting Laser) diode which couples to a fiber optic cable through an SC connector. The TX is driven with a differential PECL (Positive Emitter Coupled Logic) signal applied to TX In+ and TX In-. The maximum optical power meets the class I laser safety standard per FDA and IEC. The reciever consists of a high performance 1300 nm InGaAs PIN photodiode detector. Optical input is coupled to the receiver with either a 50/125 or a 62.5/125 micron fiber through an SC connector. APPLICATIONS: FDDI / Fast Ethernet ATM Transmitter Electro-optical Characteristics: PARAMETERS SYMBOL MIN Wavelength p 830 Optical Output Power (1) Po -19 Supply Current Icc TYP 850 35 MAX UNIT 860 nm -14 dBm 45 mA C85100MC1A PDISS Power Dissipation 0.175 Vcc 4.75 Data Input Voltage - Low(2) VIL -VCC Data Input Voltage - High(2) VIH - VCC Supply Voltage W 5.25 V -1.810 -1.475 V -1.165 -0.880 V Optical Rise Time TR 0.6 3 ns Optical Fall Time TF 0.8 3 ns Duty Cycle Distortion DCD 0.6 ns p-p Systematic Jitter SJ 0.6 ns p-p Random Jitter RJ 0.69 ns p-p 0.20 (1) The launch power is detected by an InGaAs PIN photodiode calibrated at 1300 nm, and the maximum optical power meets the class I laser safety standard. (2) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Receiver Electro-optical Characteristics: PARAMETERS SYMBOL Supply Current Power Dissipation MIN MAX UNIT Icc 55 mA PDISS 0.275 W Vcc 4.75 Data Output Voltage - Low (1) VOL - VCC Data Output Voltage - High (1) VOH - VCC Signal Detect output Voltage - Low VOL - VCC Signal Detect output Voltage - High VOH - VCC Supply Voltage TYP 5.25 V -1.810 -1.475 V -1.165 -0.880 V -1.810 -1.475 V -1.165 -0.880 V ns Rise Time TR 1.3 2.2 Fall Time TF 1.3 2.2 ns 0.4 ns p-p Duty Cycle Distortion DCD Systematic Jitter SJ 1.0 ns p-p Random Jitter RJ 2.14 ns p-p -30 dBm Sensitivity -33 PA Operating Wavelength Power Level (avg.) Detect Assert 1270 PD Power Level (avg.) Detect Deassert nm -33 dBm -45 PA - PD Level detect hysteresis 1380 dBm 2.75 dB Signal Detect Assert Time 1.75 2.25 100 s Signal Detect Deassert Time 350 s (1) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Absolute Maximum Ratings: Parameter Symbol Min. Max. Unit Storage Temperature Ts -40 100 oC Operating Temperature To 0 70 oC VCC -0.5 Lead Solder Temperature Supply Voltage OUTLINE DIMENSIONS: 260/10 7 oC /sec V C85100MC1A If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | C85100MC1A VCSELs | CommunicationLasers | PhotodiodeReceivers | FiberOptical Transceivers | BookStore | OnSale Items | Green,Red, & Infrared Laser Diode Modules | LaserDiodes | LaserAccessories| LaserProducts | ElectroluminescentProducts | C85-100M-C8A High Performance & Low Cost 100Mbps Fast Ethernet Multimode FiberTransceiver Using 850nm VCSEL Transmitter & 850 nm GaAs PINreceiver for FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style FEATURES Fully compatible with 850 nm optical links and various brandname's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 850 nm GaAsPIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Class I Laser Safe per FDA and IEC C85-100M-C8A operating to 2 km for multimode optical fiber. High performance and low cost. DESCRIPTION The C85-100M-C8A fast ethernet transceiverfrom Lasermate is a 100Mbps/125MBd fiber optic transceiver module in thenew industry standard 1x9 SIP package style with a duplex SC connector interface. The C85-100M-C8A transceiversare designed to meet the standard 2,000 m distance requirement. This provides a low cost solution to the requirementsof Fast Ethernet interconnects. They are class I laser product compliantwith FDA Radiation Performance Standards, 21 CFR Subchapter J, as wellas International Safety Standard IEC-825-1. Typical applicationsinclude: LANs (Local Area Networks), clustered workstation links, and connectionsto mass storage devices. The C85-100M-C8A transceiver has anindependent Transmitter (TX) and Receiver (RX). The transmitter consists of a high reliability 850nm VCSEL (Vertical Cavity Serface Emitting Laser) diode which couples to a fiber optic cable through an SC connector. TheTX is driven with a differential PECL (Positive Emitter Coupled Logic)signal applied to TX In+ and TX In-. The maximum optical power meets theclass I laser safety standard per FDA and IEC. The recieverconsists of a high performance 850 nm GaAs PIN photodiode detector. Opticalinput is coupled to the receiver with either a 50/125 or a 62.5/125 micronfiber through an SC connector. APPLICATIONS: FDDI / Fast Ethernet ATM Transmitter Electro-optical Characteristics: PARAMETERS SYMBOL MIN p 830 Optical Output Power (1) Po -10 Supply Current Icc Wavelength TYP 850 MAX 860 -4 35 45 UNIT nm dBm mA C85100MC1A PDISS Power Dissipation 0.175 Vcc 4.75 Data Input Voltage - Low(2) VIL -VCC Data Input Voltage - High(2) VIH - VCC Supply Voltage W 5.25 V -1.810 -1.475 V -1.165 -0.880 V ns Optical Rise Time TR 0.6 3.5 Optical Fall Time TF 0.8 3.5 ns 0.6 ns p-p 0.6 ns p-p Duty Cycle Distortion DCD Systematic Jitter SJ Random Jitter RJ 0.2 0.69 ns p-p (1) The launch power of (-10, -4) dBm is specially designed for the 2 km distance requirement and the maximum optical power meets the class I laser safety standard. (2) Voltage levels listed are compatible with 100K SeriesPECL logic levels. The parts are compatible with 10K and 10KH Series logicwhen driven with differential signals. (3) This Optical Extinction Ratio is expressed in decibels (dB) by the relationship 10*log(Phigh avg/Plow avg). Receiver Electro-optical Characteristics: PARAMETERS SYMBOL MIN Icc Supply Current MAX 55 PDISS Power Dissipation TYP UNIT mA 0.275 W Vcc 4.75 5.25 V Data Output Voltage - Low (1) VOL - VCC -1.810 -1.475 V Data Output Voltage - High(1) VOH - VCC -1.165 -0.880 V Signal Detect output Voltage- Low VOL - VCC -1.810 -1.475 V Signal Detect output Voltage- High VOH - VCC -1.165 -0.880 V ns Supply Voltage Rise Time TR 1.3 2.2 Fall Time TF 1.3 2.2 ns 0.4 ns p-p Duty Cycle Distortion DCD Systematic Jitter SJ Random Jitter RJ Sensitivity Power Level (avg.) Detect Assert PA Power Level (avg.) Detect Deassert PD Operating Wavelength ns p-p 2.14 ns p-p -30 -27 dBm 900 nm -33 dBm 800 -45 dBm PA - PD Level detect hysteresis 1.20 0.2 1.75 2.25 2.75 dB Signal Detect Assert Time 100 s Signal Detect Deassert Time 350 s (1) Voltage levels listed are compatible with 100K SeriesPECL logic levels. The parts are compatible with 10K and 10KH Series logicwhen driven with differential signals. Absolute Maximum Ratings: Parameter Symbol Min. Max. Unit Storage Temperature Ts -40 100 oC Operating Temperature To 0 70 oC VCC -0.5 Lead Solder Temperature Supply Voltage OUTLINE DIMENSIONS: 260/10 7 oC /sec V C85100MC1A If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com . HOME | PRODUCTLIST | ORDERFORM | QUO& INFO REQUEST | C85155MC1A VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | C85-155M-C1A High Performance & Low Cost 155Mbps ATM Multimode Fiber Transceiver Using 850nm VCSEL Transmitter & 1300 nm InGaAs PIN receiver for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style FEATURES Fully compatible with 1300 nm optical links and various brand name'stransceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 1300 nm InGaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Class I Laser Safe per FDA and IEC Driving up to 2 km for multimode optical fiber. High performance and low cost. DESCRIPTION The C85-155M-C1A transceiver from Lasermate is a 155Mbps/194MBd fiber optic transceiver module in the new industry standard 1x9 SIP package style with a duplex SC connector interface. This transceiver is designed to meet the ATM (Asynchronous Transfer Mode) distance requirements, which is up to 2 Km in either 50 micron or 62.5 micron multimode fiber, for multimode fiber ATM backbone links and multimode fiber ATM wiring closet to desktop links applications. It will provide the system designer with products to implement a range of solutions for multimode fiber SONET OC-3 (SDH STM-1) physical layers for ATM and other services. This transceiver is a low cost solution to the requirements of ATM155 interconnects. It is a class I laser product compliant with FDA Radiation Performance Standards, 21 CFR Subchapter J, as well as International Safety Standard IEC-825-1. Typical applications include: LANs (Local Area Networks), clustered workstation links, and connections to mass storage devices. The C85-155M-C1A transceiver has an independent Transmitter (TX) and Receiver (RX). The transmitter consists of a high reliability 850nm VCSEL (Vertical Cavity Serface Emitting Laser) diode which couples to a fiber optic cable through an SC connector. The TX is driven with a differential PECL (Positive Emitter Coupled Logic) signal applied to TX In+ and TX In-. The maximum optical power meets the class I laser safety standard. The reciever consists of a high performance 1300 nm InGaAs PIN photodiode detector. Optical input is coupled to the receiver with either a 50/125 or a 62.5/125 micron fiber through an SC connector. APPLICATIONS FDDI / Fast Ethernet ATM / SONET OC-3 / SDH STM-1 Transmitter Electro-optical Characteristics: PARAMETERS SYMBOL MIN Wavelength p 830 Optical Output Power (1) Po -19 Supply Current Power Dissipation Icc TYP 850 35 PDISS MAX UNIT 860 nm -14 dBm 45 mA 5.25 V 0.175 W Vcc 4.75 Data Input Voltage - Low(2) VIL -VCC -1.810 -1.475 V Data Input Voltage - High(2) VIH - VCC -1.165 -0.880 V Supply Voltage C85155MC1A Optical Rise Time TR 0.6 3.0 Optical Fall Time TF 0.8 3.0 ns DCD 0.6 ns p-p Systematic Jitter SJ 1.20 ns p-p Random Jitter RJ 0.52 ns p-p Duty Cycle Distortion ns (1) The launch power is detected by an InGaAs PIN photodiode calibrated at 1300 nm, and the maximum optical power meets the class I laser safety standard. (2) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Receiver Electro-optical Characteristics: PARAMETERS SYMBOL Supply Current Power Dissipation MIN TYP MAX UNIT Icc 55 mA PDISS 0.275 W Vcc 4.75 5.25 V Data Output Voltage - Low (1) VOL - VCC -1.810 -1.475 V Data Output Voltage - High (1) VOH - VCC -1.165 -0.880 V Signal Detect output Voltage - Low VOL - VCC -1.810 -1.475 V Signal Detect output Voltage - High VOH - VCC -1.165 Supply Voltage Rise Time Fall Time -0.880 V TR 1.3 2.2 ns TF 1.3 2.2 ns DCD 0.4 ns p-p Systematic Jitter SJ 1.20 ns p-p Random Jitter RJ 0.52 ns p-p -30 dBm Duty Cycle Distortion Sensitivity -33 PA Operating Wavelength Power Level (avg.) Detect Assert 1270 PD Power Level (avg.) Detect Deassert nm -33 dBm -45 dBm PA - PD Level detect hysteresis 1380 1.75 2.25 2.75 dB Signal Detect Assert Time 100 s Signal Detect Deassert Time 350 s (1) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Absolute Maximum Ratings: Parameter Symbol Min. Max. Unit Storage Temperature Ts -40 100 oC Operating Temperature To 0 Lead Solder Temperature Supply Voltage OUTLINE DIMENSIONS: 70 260/10 VCC -0.5 7 oC oC /sec V C85155MC1A If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | C85155NC8AB VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | C85-155M-C8A High Performance & Low Cost 155Mbps ATM Multimode Fiber Transceivers Using 850nm VCSEL Transmitter & 850 nm GaAs PIN receiver for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style FEATURES Fully compatible with 850 nm optical links and various brand name's transceivers. 50 % power saving than LED transceivers. Consisting of 850 nm VCSEL transmitter & 850 nm GaAs PIN receiver. Full compliance with the IEEE 802.3 standard. Single +5V power supply. Industry standard 1 x 9 package footprint. Duplex SC connector. Class I Laser Safe per FDA and IEC Driving up to 2 km for multimode optical fiber. High performance and low cost. DESCRIPTION The C85-155M-C8A transceiver from Lasermate is 155Mbps/194MBd fiber optic transceiver modules in the new industry standard 1x9 SIP package style with a duplex SC connector interface. This transceiver is designed for multimode fiber ATM backbone links and multimode fiber ATM wiring closet to desktop links applications. The C85-155M-C8A transceiver is designed to meet the standard 2,000 m distance requirement. These will provide the system designer with products to implement a range of solutions for multimode fiber SONET OC-3 (SDH STM-1) physical layers for ATM and other services. These transceiver is a low cost solution to the requirements of ATM155 interconnects. They are class I laser products compliant with FDA Radiation Performance Standards, 21 CFR Subchapter J, as well as International Safety Standard IEC-825-1. Typical applications include: LANs (Local Area Networks), clustered workstation links, and connections to mass storage devices. The C85-155M-C8A transceiver has an independent Transmitter (TX) and Receiver (RX). The transmitter consists of a high reliability 850nm VCSEL (Vertical Cavity Serface Emitting Laser) diode which couples to a fiber optic cable through an SC connector. The TX is driven with a differential PECL (Positive Emitter Coupled Logic) signal applied to TX In+ and TX In-. The maximum optical power meets the class I laser safety standard. The reciever consists of a high performance 850 nm GaAs PIN photodiode detector. Optical input is coupled to the receiver with either a 50/125 or a 62.5/125 micron fiber through an SC connector. APPLICATIONS FDDI / Fast Ethernet ATM / SONET OC-3 / SDH STM-1 Transmitter Electro-optical Characteristics: PARAMETERS Wavelength Optical Output Power (1) Supply Current Power Dissipation SYMBOL MIN p 830 Po -10 TYP 850 MAX 860 -4 Icc 35 PDISS 0.175 45 UNIT nm dBm mA W C85155NC8AB Vcc 4.75 5.25 V Data Input Voltage - Low(2) VIL -VCC -1.810 -1.475 V Data Input Voltage - High(2) VIH - VCC -1.165 Supply Voltage Optical Rise Time TR 1.3 Optical Fall Time TF 1.3 Duty Cycle Distortion -0.880 V 3.5 ns DCD Systematic Jitter SJ Random Jitter RJ 0.2 3.5 ns 0.6 ns p-p 1.2 ns p-p 0.52 ns p-p (1) The launch power of (-10, -4) dBm is specially designed for the 2 km distance requirement and the maximum optical power meets the class I laser safety standard. (2) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Receiver Electro-optical Characteristics: PARAMETERS SYMBOL Power Dissipation MIN TYP MAX UNIT Icc 55 mA PDISS 0.275 W Supply Current Vcc 4.75 5.25 V Data Output Voltage - Low (1) VOL - VCC -1.810 -1.475 V Data Output Voltage - High (1) VOH - VCC -1.165 -0.880 V Signal Detect output Voltage - Low VOL - VCC -1.810 -1.475 V Signal Detect output Voltage - High VOH - VCC -1.165 -0.880 V ns Supply Voltage Rise Time TR 1.3 2.2 Fall Time TF 1.3 2.2 ns 0.4 ns p-p Duty Cycle Distortion DCD Systematic Jitter SJ Random Jitter RJ Sensitivity PA Operating Wavelength Power Level (avg.) Detect Assert ns p-p -30 -27 dBm 900 nm -33 dBm -45 dBm PA - PD Level detect hysteresis ns p-p 2.14 800 PD Power Level (avg.) Detect Deassert 1.0 0.2 2.75 dB Signal Detect Assert Time 1.75 2.25 100 s Signal Detect Deassert Time 350 s (1) Voltage levels listed are compatible with 100K Series PECL logic levels. The parts are compatible with 10K and 10KH Series logic when driven with differential signals. Absolute Maximum Ratings: Parameter Symbol Min. Max. Unit Storage Temperature TS -40 100 oC Operating Temperature To 0 70 oC VCC -0.5 Lead Solder Temperature Supply Voltage 260/10 OUTLINE DIMENSIONS (unit: mm): 7 oC /sec V C85155NC8AB If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1.25 Gbps 850nm VCSEL Multi-mode optical transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1.25 Gbps 850nm VCSEL Multi-Mode 9-pin Optical Transceiver Model No. C-85-125G-C8A Duplex SC, 50/125m & 62.5/125m MMF C-85-125G-T8A Duplex ST, 50/125m & 62.5/125m MMF C-85-125G-F8A Duplex FC, 50/125m & 62.5/125m MMF Features Applications Low Cost and High Performance 850nm VCSEL Diode as Transmitter Power supply voltage: Single + 5V Electrical Interface: Differential PECL Pin-Configuration: 9-pin Single in Line Connector Interface: SC/ST/FC Duplex Connector Output power: -6dBm to -4dBm (for 62.5/125 m MMF) Sensitivity: <-17dBm Gigabit Ethernet Fiber Channel Data Communication Network ATM-Switches Absolute Maximum Ratings Parameter Symbol TS Storage Temperature Min. Typ. Max. Unit -40 85 oC Operating Ambient Temperature TA 0 70 oC Supply Voltage Vcc 0 5.5 V 260 10 oC Lead Soldering (Temperature) (Time) sec TRANSCEIVER ELECTRICAL SPECIFICATIONS Transmitter Ta=0 to 70oC, Vcc=4.75 to 5.25V, VEE=GND, unless otherwise specified. Parameter Supply Voltage Symbol VCCTX Supply Current ITX Input Voltage (High) (Low) VIH VIL Min. Typ. Max. Unit 4.75 5.00 5.25 V 60 mA Vcc-0.73 Vcc-1.45 V Vcc-1.17 Vcc-1.95 Cond. Note 1 1.25 Gbps 850nm VCSEL Multi-mode optical transceiver Note: VCCTX=5.0V, Ta=25oC Receiver Parameter Supply Voltage Symbol VCCRX Supply Current IRX V OH V OL Output Volage (High) (Low) Note: Min. Typ. Max. 4.75 5.00 5.25 V 120 mA VCCRX-0.88 VCCRX-1.62 V V VCCRX-1.03 VCCRX-1.81 Unit Cond. Note 1,2 Note 1,2 1. Output load resistor (RL=50 ohm) is connected to VCCRX-2.0V 2. VCCRX=5.0V, Ta=25oC TRANSCEIVER OPTICAL SPECIFICATIONS Transmitter Tc=20 to 70oC, Vcc-VEE=4.75 to 5.25V , VEE=GND, unless otherwise specified. Parameter Symbol Min. Po Optical Output Power Optical Extinction Ratio Optical Rise Time (20~80%) Optical Fall Time (80~20%) ER Typ. Max. Units Cond. -12 -8 dBm for 50/125 m MMF, Note1 -6 -4 dBm for 62.5/125 m MMF, Note1 Note1 9 dB tr tf Center Wavelength TX Spectral Width (RMS) 830 845 260 260 psec psec 860 nm 0.85 nm Note: 1.25Gbps, PRBS 27-1 signal at the beginning of life Receiver Tc=20 to 70oC, Vcc-VEE=4.75 to 5.25V unless otherwise specified. Parameter Symbol Min. Optical Input Wavelength RX 770 Optical Return Loss ORL 12 Minimum Input Power Pin PSAT Saturation Power SD Assert Level SD Deassert Level SD Hysterssis Pa Pd Phys Typ. Max. Units 860 nm Cond. dB -19 0 -17 dBm avg. Note 1 dBm -19 -22 3 dBm dBm dB Note: BER=1.0x10-12, 1.25G, PRBS 27-1 Please click below for more information. Package Dimensions Pin Assignment If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Note 1 Note 1 Note 1 1.25 Gbps 850nm VCSEL Multi-mode optical transceiver 1x9 pins 1.25Gbps 850 nm VCSEL duplex SC/ST/FC multimode fiber optical transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Package Dimensions of 1x9-pin Optical Transceiver Units:mm (Top View) 1x9 pins 1.25Gbps 850 nm VCSEL duplex SC/ST/FC multimode fiber optical transceiver If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | PIN ASSIGNMENT FOR 1.25 GBPS 850NM VCSEL MM FIBER OPTICAL TRANSCEIVERS VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | PIN ASSIGNMENT: (TOP VIEW) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Specifications of LT System Laser Diode Modules Specifications of LTG-Series Laser Diode Modules Specifications of LTC-Series Laser Diode Modules Specifications of LTG-Series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) LTG635X1A X2 LTG650X1A X2 LTG670X1A X2 LTG780X1A X2 LTG808X1A X2 LTG830X1A X2 635 650 670 780 808 830 X1=1, 4 & 7 X1=1, 4, 7 & 14 Index guided X1=1 & 4 X1= 4 X1= 4 X1= 20 0.7-0.99 (X1=1); 2.5-3.5 (X1=4); 5-7 (X1=7); 10-14 (X1=14); 16-20 (X1=20) Laser class Typ. operating current (mA) Operating voltage (VDC) Drive Circuit Class II (X1=1); Class IIIa (X1=4); Class IIIb (X1=7, 14 & 20) 40 30 35 30 25 Standard:4.5 -6 (X2 = H); Optional: 3 - 5 (X2= R) & 3-9 (X2 =G) 85 Standard: regulated APC with soft-start protection (X2= H) Optional: regulated APC (X2= R & G) Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (in) Weight (gm) Option Class IIIb 3-element glass collimating lens with AR coating < 0.5 5x8 elliptic Adjustable -10 to +50 -10 to +40 -10 to +50 Black wire - & red wire + Dia. 0.5 x L. 2 35 Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LT-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of LTC-Series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) LTC635X1A X2 LTC650X1A X2 LTC670X1A X2 LTC780X1A X2 LTC808X1A X2 LTC830X1A X2 635 650 670 780 808 830 X1=1, 2 & 4 X1=1, 2, 4 & 8 Index guided X1=1 & 2 X1= 2 X1= 2 0.7-0.99 (X1=1); 1.2-2 (X1=2); 2.4-4.0 (X1=4); 5-8 (X1=8); 6-10 (X1=10) X1= 10 Laser class Class II (X1=1); Class IIIa (X1=2 & 4); Class IIIb (X1=8 & 10) Typ. operating current (mA) Operating voltage (VDC) 40 Drive Circuit Class IIIb 30 35 30 25 Standard:4.5 -6 (X2 = H); Optional: 3 - 5 (X2= R) & 3-9 (X2 =G) 85 Standard: regulated APC with soft-start protection (X2= H) Optional: regulated APC (X2= R & G) Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (in) Weight (gm) Option -10 to +50 Singlet plastic collimating lens < 0.5 Dia. 5 circular Adjustable -10 to +40 -10 to +50 Black wire - & red wire + Dia. 0.5 x L. 2 35 Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LT-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. NOTES: We offer 650nm laser diode module with the same low price of 670nm laser diode module. Our 650nm laser diode module will provide you 3.4 time brighter laser beam than that of 670nm laser diode module. Infrared 808 nm laser modules with 100 & 250 mW optical output power are also available. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Green, red, & infrared laser diode modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | High Power Laser Diode Modules Model No. LBG808120AC LBG808250AC LBG808500AC Wavelength 808 808 808 (nm) Optical output 100 - 120 230 - 250 450 - 500 power (mW) Green, red, & infrared laser diode modules Operating voltage (V DC) Operating current (A) PCB Optics 5 5 5 <0.55 <0.75 <1.5 ACC (automatic current control) 3-element glass collimating lens with anti-reflective coating adjustable elliptic beam Focus Beam profile Beam size @ 5 5x8 m (mm) Operating -10 to 40 oC temperature red wire (+) & Connector black wire (-) Dimensions Dia. 3.2 x L. (cm) 11.5 ACC (automatic ACC (automatic current control) current control) 3-element glass collimating lens with anti-reflective coating adjustable elliptic beam 3-element glass collimating lens with anti-reflective coating adjustable elliptic beam 5x8 5x8 -10 to 40 oC -10 to 40 oC red wire (+) & black wire (-) Dia. 3.2 x L. 11.5 red wire (+) & black wire (-) Dia. 3.2 x L. 11.5 For your information, TTL and analog modulation versions for LBG- series laser modules are also available. Note: The LB-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. The customer is responsible to be in compliance with FDA requirements. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Specifications of Analog modulatable LT- series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) Laser Class Typ. Operating current (mA) Operating voltage (VDC) Control voltage (VDC) Drive Circuit Modulation bandwidth (Hz) Modulation mode Optics Beam divergence (mrad) Beam profile & size @ 7 m Focus Operating temperature (oC) Dimensions (in) Weight (gm) Option LTG635XA5M 635 LTG650XA5M 650 LTG670XA5M 670 Index guided 0.7-0.99 (X=1); 2.5-3.5 (X=4); 5-7 (X=7); 10-14 (X=14) LTG7804A5M 780 Class II (X=1), Class IIIa (X=3), Class IIIb (X=7 &14) 40 (X=1 & 4), 60 30 (X=1 & 4), 35 35 (X=1 & 4) (X=7) (X=7), 65 (X=14) 5 Maximum 5 APC with modulator From DC to 100 KHz LTG8084A5M 808 2.5-3.5 Class IIIb 30 Analog 3-element glass collimating lens with AR coating < 0.5 elliptic & 5 mm x 8 mm adjustable -10 to +40 Dia. 0.5 x L. 2 35 Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LT-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 25 VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Specifications of TTL modulatable LT- series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) Laser Class Typ. Operating current (mA) LTG635XA5T 635 LTG650XA5T 650 LTG670XA5T 670 Index guided 0.7-0.99 (X=1); 2.5-3.5 (X=4); 5-7 (X=7); 10-14 (X=14) LTG7804A5T 780 Class II (X=1), Class IIIa (X=3), Class IIIb (X=7 &14) 40 (X=1 & 4), 60 30 (X=1 & 4), 35 35 (X=1 & 4) (X=7) (X=7), LTG8084A5T 808 2.5-3.5 Class IIIb 30 65 (X=14) Operating voltage (VDC) 5 Control voltage (VDC) Maximum 5 Drive Circuit APC with modulator Modulation bandwidth From DC to 100 KHz (Hz) Modulation mode TTL Optics 3-element glass collimating lens with AR coating Beam divergence (mrad) < 0.5 Beam profile & size @ 7 elliptic & 5 mm x 8 mm m Focus adjustable Operating temperature -10 to +40 (oC) Dimensions (in) Dia. 0.5 x L. 2 Weight (gm) 35 Option Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LT-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 25 Options Options for LT- Laser Modules Compact Beam Expanders * Connecting to LT- Laser Module Directly * All Optical Glass Lens with AR coating * Focusing Range from 50 cm to infinity * Max. Entrance Aperture Dia. 4 mm * Minimizing Beam Spot Size at Long Working Distance Item No. Beam expander Beam diameter Divergence TC-2X 2X 4 mm < 0.25 mrd TC-3X 3X 4 mm < 0.17 mrd TC-7X 7X 4 mm < 0.07 mrd TC-10X 10X 4 mm < 0.05 mrd Line Generating Optics * Connecting to LT- Laser Module Directly Options * Cylinder Glass Lens * Full Fan Angle 90 deg. * Focusing range from 50 cm to infinity * Highth: 2 mm at 700 cm distance Item No. LO-90 Other Optional Line Generating Optics * Connecting to LT- Laser Module Directly * Glass Lens * Full Fan Angle 60, 45, 30, 15, 4 deg. Item No. LO-60 LO-45 LO-30 LO-15 LO-4 If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page LX-Series Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | High Performance Laser Diode Modules - LX System The LX laser diode module system is a modified version of LT laser diode system designed for OEM applications with DC-Jack connector for using AC adapter and beam focusing requirements. Designed for the OEM, it is ideal for a wide range of low power laser applications, especially in continuous long time usage such as bar code reader, measurement, alignment, and positioning. Features High Performance and Low Cost Wide Range of Wavelength (635nm 830nm) and Output power (0.9mW 50mW) Automatic Power Control Soft-start, Short-circuit, and Reverse-polarity Protections Two High Performance Collimating Lenses for Your Choice Adjustable Focus Super Fine Pitch (0.25mm) for Precision Focusing Standard English LX-Series Laser Diode Modules Dimension (Dia. = 0.5 in., L = 2.0 in.) DC-Jack connector for using AC adapter Line Generating Optics and Compact Beam Expander for Options Specifications of LX- laser modules Accessory options for LX- laser modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Specifications of LX System Laser Diode Modules Specifications of LXG-Series Laser Diode Modules Specifications of LXC-Series Laser Diode Modules Specifications of LXG-Series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) LXG635X1A X2 LXG650X1A X2 LXG670X1A X2 LXG780X1A X2 LXG808X1A X2 LXG830X1A X2 635 650 670 780 808 830 X1=1, 4 & 7 X1=1, 4, 7 & 14 Index guided X1=1 & 4 X1= 4 X1= 4 X1= 20 0.7-0.99 (X1=1); 2.5-3.5 (X1=4); 5-7 (X1=7); 10-14 (X1=14); 16-20 (X1=20) Laser class Typ. operating current (mA) Operating voltage (VDC) Drive Circuit Class II (X1=1); Class IIIa (X1=4); Class IIIb (X1=7, 14 & 20) 40 30 35 30 25 Standard:4.5 -6 (X2 = H); Optional: 3 - 5 (X2= R) & 3-9 (X2 =G) 85 Standard: regulated APC with soft-start protection (X2= H) Optional: regulated APC (X2= R & G) Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (in) Weight (gm) Option Class IIIb 3-element glass collimating lens with AR coating < 0.5 5x8 elliptic Adjustable -10 to +50 -10 to +40 -10 to +50 5V DC-Jack Dia. 0.5 x L. 2 35 Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LX-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of LXC-Series Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) LXC635X1A X2 LXC650X1A X2 LXC670X1A X2 635 650 670 X1=1, 2 & 4 X1=1, 2, 4 & 8 LXC780X1A X2 780 Index guided X1=1 & 2 X1= 2 LXC808X1A X2 LXC830X1A X2 808 830 X1= 2 X1= 10 0.7-0.99 (X1=1); 1.2-2 (X1=2); 2.4-4.0 (X1=4); 5-8 (X1=8); 6-10 (X1=10) Laser class Class II (X1=1); Class IIIa (X1=2 & 4); Class IIIb (X1=8 & 10) Typ. operating current (mA) Operating voltage (VDC) 40 Drive Circuit Class IIIb 30 35 30 25 Standard:4.5 -6 (X2 = H); Optional: 3 - 5 (X2= R) & 3-9 (X2 =G) 85 Standard: regulated APC with soft-start protection (X2= H) Optional: regulated APC (X2= R & G) Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (in) Weight (gm) Option -10 to +50 Singlet plastic collimating lens < 0.5 Dia. 5 circular Adjustable -10 to +40 -10 to +50 5V DC-Jack Dia. 0.5 x L. 2 35 Connecting to (1) the cross hair optics with 9 degree full fan angle (2) LO- series line optics (LO-04, LO-45, LO-60 & LO-90) (3) TC- series beam expander (TC-2X, TC-3X & TC-10X) Note: The LX-series laser diode modules are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. NOTES: We offer 650nm laser diode module with the same low price of 670nm laser diode module. Our 650nm laser diode module will provide you 3.4 time brighter laser beam than that of 670nm laser diode module. Infrared 808 nm laser modules with 100 & 250 mW optical output power are also available. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | LJ-Series Laser Diode Modules Prime Laser Diode Modules - LJ System The LJ laser diode module is designed for OEM applications with very low cost, small size, good heat sink, and beam focusing requirements. TTL modulation from DC to 100KHz for LJ laser diode module is also available. Designed for the OEM, it is ideal for a wide range of low power laser applications, such as leveling, measurement, alignment, and positioning. LJ-Series Laser Diode Modules Features Good Performance and Very Low Cost Miniature, Rugged Design: 12 Dia. x 29.5mm L. Wide Operating Voltage: 3-10VDC for 650 - 830nm, 3-4.5VDC for 635nm Adjustable Focus Good Heat Sink Design Automatic Power Control Reverse-polarity Protections Wide Range of Wavelength 635nm - 830nm Specifications of LJ- laser modules Specifications of Analog Modulatable LJ- laser modules Specifications of TTL Modulatable LJ- laser modules If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of LJ- Prime Laser Diode Modules Specifications of LJ- Prime Laser Diode Modules Specifications of Class IIIa LJ- Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Drive circuit Protections Optics Focus Beam size @ 7 m (mm) Beam divergence (mrad) Beam profile Connector Wire length (cm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) LJP6353AR-A (B or C) 635 index guided class IIIa (< 5mW) 2.1- 3.0 < 60 (<80 or <70) LJP6503AR 650 index guided class IIIa (< 5mW) 2.1- 3.0 < 45 LJP6703AR 670 index guided class IIIa (< 5mW) 2.1- 3.0 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 regulated automatic power control short circuit & reverse polarity protections regulated automatic power control short circuit & reverse polarity protections singlet plastic collimating lens with AR coating adjustable 4x71 < 0.5 elliptical wires (red + & black -) 10 regulated automatic power control short circuit & reverse polarity protections singlet plastic collimating lens with AR coating adjustable 4x71 < 0.5 elliptical wires (red + & black -) 10 singlet plastic collimating lens with AR coating adjustable 4x71 <0.5 elliptical wires (red + & black -) 10 -10 to 50 (-10 to 50 or -10 to 40) -10 to 50 (or -10 to 40) -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 12 (Dia.) x 29.2 (L) 12 (Dia.) x 29.2 (L) 12 (Dia.) x 29.2 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LJ- laser modules is available, if specified. 3. The LJ- series laser diode modules are designated solely as OEM components for incorporation into Specifications of LJ- Prime Laser Diode Modules customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II LJ- Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Drive circuit Protections Optics Focus Beam size @ 7 m (mm) Beam divergence (mrad) Beam profile Connector Wire length (cm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) LJP6353AR-A (B or C) 635 index guided class IIIa (< 5mW) 0.7-0.99 < 60 (<80 or <70) LJP6503AR 650 index guided class IIIa (< 5mW) 0.7-0.99 < 45 LJP6703AR 670 index guided class IIIa (< 5mW) 0.7-0.99 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 regulated automatic power control short circuit & reverse polarity protections regulated automatic power control short circuit & reverse polarity protections singlet plastic collimating lens with AR coating adjustable 4x71 < 0.5 elliptical wires (red + & black -) 10 regulated automatic power control short circuit & reverse polarity protections singlet plastic collimating lens with AR coating adjustable 4x71 < 0.5 elliptical wires (red + & black -) 10 singlet plastic collimating lens with AR coating adjustable 4x71 <0.5 elliptical wires (red + & black -) 10 -10 to 50 (-10 to 50 or -10 to 40) -10 to 50 (or -10 to 40) -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 12 (Dia.) x 29.2 (L) 12 (Dia.) x 29.2 (L) 12 (Dia.) x 29.2 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LJ- laser modules is available, if specified. 3. The LJ- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Specifications of LJ- Prime Laser Diode Modules Return to Lasermate Corporation Home Page Specifications of Analog Modulatable LJ- Laser Diode Modules Please update our new address/phone numbers! Address: 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 E-mail: info@lasermate.com Web: http://www.lasermate.com/ VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Analog Modulatable LJ- Laser Diode Modules Specifications of Class IIIa & IIIb Analog Modulatable LJ- Laser Diode Modules LJP6353A3-M- A ( or C) Wavelength (nm) 635 Diode structure index guided Classification class IIIa (< 5mW) Output power 2.5 - 3.0 (mW) Operating current < 60 (<45) (mA) Operating voltage 3 (VDC) Control voltage max. 3 (VDC) Drive circuit APC with modulator Operation mode analog Bandwidth (Hz) up to 100K singlet plastic Optics collimating lens Focus adjustable Beam size @ 7 m 3.5 x 6 1 (mm) Beam divergence < 0.5 (mrad) Beam profile elliptic Model No. HOME ORDER FORM PRODUCT LIST QUO & INFO REQUEST LJP6503A3-M-A (C or E) 650 index guided class IIIa (< 5mW) LJP6703A3-M LJP8083A3-M 670 index guided class IIIa (< 5mW) 808 index guided class IIIb 2.5 - 3.0 2.5 - 3.0 2.5 - 3.0 < 45 < 75 <40 3 3 3 max. 3 max. 3 max. 3 APC with modulator analog up to 100K singlet plastic collimating lens adjustable APC with modulator APC with modulator analog analog up to 100K up to 100K singlet plastic singlet plastic collimating lens collimating lens adjustable adjustable 3.5 x 6 1 3.5 x 6 1 3.5 x 6 1 < 0.5 < 0.5 <0.5 elliptic elliptic elliptic Specifications of Analog Modulatable LJ- Laser Diode Modules Connector wires (red + & black wires (red + & black -) -) provided provided 10 10 Heat sink Wire length (cm) Operating -10 to 50 ( or 40) temperature (oC) Storage - 40 to 85 temperature (oC) Dimensions (mm) 12 (Dia.) x 29.5 (L) wires (red + & black -) provided 10 wires (red + & black -) provided 10 -10 to 50 (40 or 60) -10 to 50 -10 to 40 - 40 to 85 - 40 to 85 - 40 to 85 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) NOTES: 1. We offer 650nm laser diode module with the same low price of 670nm laser diode module. Our 650nm laser diode module will provide you about 3.4 time brighter la beam than that of 670nm laser diode module. 2. Fixed focus for LJ- laser modules is available, if specified. 3. The LJ- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate requirments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II Analog Modulatable LJ- Prime Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Control voltage (VDC) Drive circuit Operation mode Bandwidth (Hz) LJP6351A3-M- A ( or C) 635 index guided class IIIa (< 5mW) 0.7-0.99 LJP6501A3-M-A (C or E) 650 index guided class IIIa (< 5mW) 0.7-0.99 LJP6701A3-M 670 index guided class IIIa (< 5mW) 0.7-0.99 < 60 (or <45) < 45 < 75 3 3 3 max. 3 APC with modulator analog up to 100K singlet plastic collimating Optics lens Focus adjustable Beam size @ 7 m (mm) 3.5 x 6 1 Beam divergence < 0.5 (mrad) Beam profile elliptic max. 3 APC with modulator analog up to 100K max. 3 APC with modulator analog up to 100K singlet plastic collimating singlet plastic collimating lens lens adjustable adjustable 3.5 x 6 1 3.5 x 6 1 < 0.5 < 0.5 elliptic elliptic Specifications of Analog Modulatable LJ- Laser Diode Modules Connector wires (red + & black -) wires (red + & black -) wires (red + & black -) Heat sink provided provided provided Wire length (cm) 10 10 10 Operating temperature -10 to 50 ( or 40) -10 to 50 (40 or 60) -10 to 50 (oC) Storage temperature - 40 to 85 - 40 to 85 - 40 to 85 (oC) Dimensions (mm) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of TTL Modulatable & Variable Power LJ- Laser Diode Modules Please update our new address/phone numbers! Address: 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 E-mail: info@lasermate.com Web: http://www.lasermate.com/ VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | TTL Modulatable & Variable Power LJ- Laser Diode Modules Specifications of Class IIIa & IIIb TTL Modulatable & Variable Power LJ- Laser Diode Modules Model No. HOME ORDER FORM PRODUCT LIST QUO & INFO REQUEST Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Control voltage (VDC) LJP6353A5-T- A ( or C) 635 index guided class IIIa (< 5mW) LJP6503A5-T-A (C or E) 650 index guided class IIIa (< 5mW) 2.5 - 3.0 LJP6703A5-T LJP8083A5-T 670 index guided class IIIa (< 5mW) 808 index guided class IIIb 2.5 - 3.0 2.5 - 3.0 2.5 - 3.0 < 60 (or <45) < 45 < 75 <40 5 5 5 5 max. 5 max. 5 max. 5 max. 5 APC with modulator analog up to 100K singlet plastic collimating lens adjustable Drive circuit APC with modulator APC with modulator Operation mode Bandwidth (Hz) analog up to 100K singlet plastic collimating lens adjustable analog up to 100K singlet plastic collimating lens adjustable APC with modulator analog up to 100K singlet plastic collimating lens adjustable 3.5 x 6 1 3.5 x 6 1 3.5 x 6 1 3.5 x 6 1 < 0.5 < 0.5 < 0.5 <0.5 elliptic elliptic elliptic elliptic Optics Focus Beam size @ 7 m (mm) Beam divergence (mrad) Beam profile Specifications of TTL Modulatable & Variable Power LJ- Laser Diode Modules Connector Heat sink Wire length (cm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) wires (red + & black wires (red + & black -) -) provided provided 10 10 wires (red + & black -) provided 10 wires (red + & black -) provided 10 -10 to 50 ( or 40) -10 to 50 (40 or 60) -10 to 50 -10 to 40 - 40 to 85 - 40 to 85 - 40 to 85 - 40 to 85 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) NOTES: 1. We offer 650nm laser diode module with the same low price of 670nm laser diode module. Our 650nm laser diode module will provide you about 3.4 time brighter la beam than that of 670nm laser diode module. 2. Fixed focus for LJ- laser modules is available, if specified. 3. The LJ- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate requirments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II TTL Modulatable & Variable Power LJ- Prime Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Control voltage (VDC) Drive circuit Operation mode Bandwidth (Hz) LJP6351A5-T- A ( or C) 635 index guided class IIIa (< 5mW) 0.7-0.99 < 60 (or <45) LJP6501A5-T-A (C or E) 650 index guided class IIIa (< 5mW) 0.7-0.99 < 45 LJP6701A5-T 670 index guided class IIIa (< 5mW) 0.7-0.99 < 75 5 5 5 max. 5 APC with modulator analog up to 100K singlet plastic collimating Optics lens Focus adjustable Beam size @ 7 m (mm) 3.5 x 6 1 Beam divergence (mrad) < 0.5 Beam profile elliptic yellow control, red + & Connector black - max. 5 APC with modulator analog up to 100K max. 5 APC with modulator analog up to 100K singlet plastic collimating singlet plastic collimating lens lens adjustable adjustable 3.5 x 6 1 3.5 x 6 1 < 0.5 < 0.5 elliptic elliptic yellow control, red + & black yellow control, red + & black - Specifications of TTL Modulatable & Variable Power LJ- Laser Diode Modules Heat sink provided provided provided Wire length (cm) 10 10 10 Operating temperature -10 to 50 ( or 40) -10 to 50 (40 or 60) -10 to 50 (oC) Storage temperature - 40 to 85 - 40 to 85 - 40 to 85 (oC) Dimensions (mm) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) 12 (Dia.) x 29.5 (L) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | LM-Series Laser Diode Modules Compact Laser Diode Modules - LM-Series The LM laser diode module is designed for OEM applications with the lower cost, compact size, and beam focusing requirements. Designed for the OEM, it is ideal for a wide range of low power laser applications, such as alignment, leveling, and positioning. Features Good Performance and the Lower Cost Compact Design: 11.5 Dia. x 40 mm L. Adjustable Focus Focus Range from 6 cm or 20 cm to Infinity Circular and Elliptic Beam Shapes Available Regulated Automatic Power Control Operating Voltage 2.7 - 6.0 VDC Wide Range of Wavelength 635nm - 830nm LM-Series Laser Diode Modules Specifications of LMC- laser modules Specifications of LMP- laser modules Specifications of LMG- laser modules If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page Specifications of LMC- Compact Laser Diode Modules Specifications of LMC- Compact Laser Diode Modules Specifications of Class IIIa LMC- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMC6352AR-A (or B) 635 index guided class IIIa (< 5mW) 1.5 - 2.0 LMC6502AR 650 index guided class IIIa (< 5mW) 1.5 - 2.0 LMC6702AR 670 index guided class IIIa (< 5mW) 1.5 - 2.0 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 Drive circuit automatic power control automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 3.5 dia. 5 1 automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 3.5 dia. 5 1 < 0.5 < 0.5 circular wires with strain releaser 23 short circuit & reverse polarity protections singlet plastic collimating Optics lens Focus adjustable Beam size @ aperture 3.5 Beam size @ 7 m (mm) dia. 5 1 Beam divergence < 0.5 (mrad) Beam profile circular Protections Connector wires with strain releaser Weight (gm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) 23 circular wires with strain releaser 23 -10 to 50 -10 to 50 -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMC- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for Specifications of LMC- Compact Laser Diode Modules incorporation into customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II LMC- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMC6352AR-A (or B) 635 index guided class IIIa (< 5mW) 0.7-0.99 LMC6502AR 650 index guided class IIIa (< 5mW) 0.7-0.99 LMC6702AR 670 index guided class IIIa (< 5mW) 0.7-0.99 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 Drive circuit automatic power control automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 3.5 dia. 5 1 automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 3.5 dia. 5 1 < 0.5 < 0.5 circular wires with strain releaser 23 short circuit & reverse polarity protections singlet plastic collimating Optics lens Focus adjustable Beam size @ aperture 3.5 Beam size @ 7 m (mm) dia. 5 1 Beam divergence < 0.5 (mrad) Beam profile circular Protections Connector wires with strain releaser Weight (gm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) 23 circular wires with strain releaser 23 -10 to 50 -10 to 50 -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMC- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Specifications of LMC- Compact Laser Diode Modules Return to Lasermate Corporation Home Page Specifications of LMC- Compact Laser Diode Modules Specifications of LMP- Compact Laser Diode Modules Specifications of Class IIIa LMP- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMP6353AR-A (or B) 635 index guided class IIIa (< 5mW) 2.1 - 3.0 LMP6503AR 650 index guided class IIIa (< 5mW) 2.1 - 3.0 LMP6703AR 670 index guided class IIIa (< 5mW) 2.1 - 3.0 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 Drive circuit automatic power control automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 < 0.5 < 0.5 elliptical wires with strain releaser 23 short circuit & reverse polarity protections singlet plastic collimating Optics lens Focus adjustable Beam size @ aperture 4.5 Beam size @ 7 m (mm) 4 x 7 1 Beam divergence < 0.5 (mrad) Beam profile elliptical Protections Connector wires with strain releaser Weight (gm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) 23 elliptical wires with strain releaser 23 -10 to 50 -10 to 50 -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMP- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for Specifications of LMC- Compact Laser Diode Modules incorporation into customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II LMP- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMP6351AR-A (or B) 635 index guided class II (< 1mW) 0.7-0.99 LMP6501AR 650 index guided class II (< 1mW) 0.7-0.99 LMP6701AR 670 index guided class II (< 1mW) 0.7-0.99 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 Drive circuit automatic power control automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 < 0.5 < 0.5 elliptical wires with strain releaser 23 short circuit & reverse polarity protections singlet plastic collimating Optics lens Focus adjustable Beam size @ aperture 4.5 Beam size @ 7 m (mm) 4 x 7 1 Beam divergence < 0.5 (mrad) Beam profile elliptical Protections Connector wires with strain releaser Weight (gm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) 23 elliptical wires with strain releaser 23 -10 to 50 -10 to 50 -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMP- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Specifications of LMC- Compact Laser Diode Modules Return to Lasermate Corporation Home Page Specifications of LMC- Compact Laser Diode Modules Specifications of LMG- Compact Laser Diode Modules Specifications of Class IIIa LMG- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMG6353AR-A (or B) 635 index guided class IIIa (< 5mW) 3.1 - 4.0 LMG6503AR 650 index guided class IIIa (< 5mW) 3.1 - 4.0 LMG6703AR 670 index guided class IIIa (< 5mW) 3.1 - 4.0 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 automatic power control short circuit & reverse short circuit & reverse Protections polarity protections polarity protections 3-element glass collimating 3-element glass Optics lens with antireflection collimating lens with coating antireflection coating Focus adjustable adjustable Beam size @ aperture 4.5 4.5 Beam size @ 7 m (mm) 5 x 8 1 5x81 Beam divergence 0.35 x 0.45 0.35 x 0.45 (mrad) Beam profile elliptical elliptical wires with strain Connector wires with strain releaser releaser Weight (gm) 23 23 Operating -10 to 50 -10 to 50 temperature (oC) Storage temperature - 40 to 85 - 40 to 85 (oC) Dimensions (mm) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) Drive circuit automatic power control automatic power control short circuit & reverse polarity protections 3-element glass collimating lens with antireflection coating adjustable 4.5 5x81 0.35 x 0.45 elliptical wires with strain releaser 23 -10 to 50 - 40 to 85 11.5 (Dia.) x 40 (L) Specifications of LMC- Compact Laser Diode Modules NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMG- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Class II LMG- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) LMG6351AR-A (or B) 635 index guided class II (< 1mW) 0.7-0.99 LMG6501AR 650 index guided class II (< 1mW) 0.7-0.99 LMG6701AR 670 index guided class II (< 1mW) 0.7-0.99 < 60 (or < 80) < 45 < 75 2.8 - 4.5 2.8 - 6.0 2.8 - 4.5 Drive circuit automatic power control automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 automatic power control short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 < 0.5 < 0.5 elliptical wires with strain releaser 23 short circuit & reverse polarity protections singlet plastic collimating Optics lens Focus adjustable Beam size @ aperture 4.5 Beam size @ 7 m (mm) 4 x 7 1 Beam divergence < 0.5 (mrad) Beam profile elliptical Protections Connector wires with strain releaser Weight (gm) Operating temperature (oC) Storage temperature (oC) Dimensions (mm) 23 elliptical wires with strain releaser 23 -10 to 50 -10 to 50 -10 to 50 - 40 to 85 - 40 to 85 - 40 to 85 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMG- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for incorporation into Specifications of LMC- Compact Laser Diode Modules customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page PL-Series Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Miniature Laser Diode Modules - PL-Series The PL laser diode module is designed for OEM applications with the lowest cost, miniature size, and beam focusing requirements. Additional heat sink may be needed for PL-series laser module under continuously operating for a long period of time. Designed for the OEM, it is ideal for a wide range of low power laser applications, such as general sighting, leveling, and positioning. Features Basic Performance and the Lowest Cost Miniature Design: 10.5 Dia. x 17 mm L or 10.5 Dia. x 21 mm L Adjustable Focus Circular and Elliptic Beam Shapes Available Automatic Power Control and Automatic Current Control Circuits Available PL-Series Laser Diode Modules Wide Range of Wavelength 635nm 850nm Options: Optics Generating 2.5 Degree Line and 9 Degree Cross Hair Available Please call for your special needs. We shall have a solution for you. Specifications of PLC- laser modules Specifications of PLP- laser modules PL-Series Laser Diode Modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of LMC- Compact Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Specifications of PLC- Laser Diode Modules Model No.: Wavelength (nm) Diode structure Optical output power (mW) Laser class PLC635X1A X2 PLC650X1A X2 PLC670X1A X2 PLC780X1A X2 PLC808X1A X2 635 650 670 780 Index guided 0.7-0.99 (X1=1); 1.2-2 (X1=2) Class II (X1=1); Class IIIa (X1=2) 808 Class IIIb Typ. operating 40 30 35 30 25 current (mA) Operating voltage 3 - 4.5 (X2= E & W); 4.5 (X2 = N); 3-5 (X2 = K & L); 3-9 (X2 =G) (VDC) Drive circuit Stanadrd: APC (X2=E); Optional: APC with limited current (X2=N); regulated APC (X2=W, K & G); regulated APC with limited current (X2= L) Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (mm) Weight (gm) Option Singlet plastic collimating lens < 0.5 Dia. 5 circular Adjustable -10 to +40 Black wire - & red wire + Dia. 10.5 x L. 19.5 (X2= E, K & N); Dia. 10.5 x L. 31.5 (X2 = W, L & G) 12 Cross hair optics & 2.5 degree full fan angle line generating optics NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for PLC- laser modules is available, if specified. 3. The PLC- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of LMC- Compact Laser Diode Modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of LMC- Compact Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Specifications of PLP- Laser Diode Modules Model No.: PLP635X1A X2 PLP650X1A X2 Wavelength (nm) Diode structure Optical output power (mW) Laser class 635 650 Typ. operating current (mA) Operating voltage (VDC) 40 Drive Circuit Optics Beam divergence (mrad) Beam size @ 7 m (mm) Beam profile Focus Operating temperature (oC) Connector Dimensions (mm) Weight (gm) Option PLP670X1A X2 PLP780X1A PLP808X1A X2 X2 670 780 Index guided 0.7-0.99 (X1=1); 2.1-3 (X1=3) Class II (X1=1); Class IIIa (X1=3) 30 35 808 Class IIIb 30 25 3 - 4.5 (X2= E & W); 4.5 (X2 = N); 3-5 (X2 = K & L); 3-9 (X2 =G) Standard: APC (X2=E); Optional: APC with limited current (X2=N); regulated APC (X2=W, K & G); regulated APC with limited current (X2= L) Singlet plastic collimating lens with AR coating < 0.5 3.4 x 5.8 elliptic Adjustable -10 to +40 Black wire - & red wire + Dia. 10.5 x L. 15 (X2= E, K & N); Dia. 10.5 x L. 27 (X2 = W, L & G) 12 Cross hair optics (9 degree) & line generating optics (2.5 degree) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for PLP- laser modules is available, if specified. 3. The PLP- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of LMC- Compact Laser Diode Modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | LM-Series Laser Diode Modules Compact Laser Diode Modules with Cross Hair ProfileLM-Series The LM laser diode modules with cross hair profile are designed for OEM applications with the lower cost, compact size, and beam focusing requirements. Designed for the OEM, it is ideal for a wide range of low power laser applications, such as alignment and positioning. Features Good Performance and the Lower Cost Wide Range of Wavelength 635nm - 830nm Beam Profile: "+" cross hair Beam Thickness: <1mm Beam Length: 15.7cm @ 1m distance Full Fan Angle: 9 deg. Compact Design: 11.5 Dia. x 40 mm L. Adjustable Focus Focus Range from 6 cm or 7 cm to Infinity Regulated Automatic Power Control Operating Voltage 2.7 - 6.0 VDC If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page LT-Series Laser Diode Modules High Performance Cross Hair Generating Laser Diode Modules - LTG Series The high performance LTG- series laser diode modules with cross hair profile are a complete laser diode system designed for OEM applications with fine cross hair profile, adjustable output power, and beam focusing requirements. It is designed as the high quality and performance laser diode module for industrial heavy duty users. Designed for the OEM, it is ideal for a wide range of low power laser applications, especially in continuous long time usage such as alignment and positioning. Features High Performance and Low Cost Wide Range of Wavelength (635nm - 850nm) and Output power (0.9mW - 50mW) Beam Profile: "+" cross hair Beam Thickness: <1mm Beam Length: 15.7cm @ 1m distance Full Fan Angle: 9 deg. Adjustable Optical Output Power and Automatic Power Control Soft-start, Short-circuit, and Reverse-polarity Protections Adjustable Focus Super Fine Pitch (0.25mm) for Precision Focusing Standard English Dimension (Dia. = 0.5 in., L = 2.0 in.) Green LED Safety Indicator Model No. LTG-6 Wavelength (nm) 704 604 607 6015 6035 504 507 5015 354 357-AH-9X 670 660 660 660 660 650 650 650 635 635 LT-Series Laser Diode Modules Max. Diode Output Power (mW) Max.Optical Output Power(mW) Model No. LT Wavelength (nm) Max. Diode Output Power (mW) Max.Optical Output Power(mW) 5 4 5 4 10 7 20 15 50 35 G8084 808 5 4 5 4 10 7 20 15 G80815 808 30 15 If you have any comments or request for detail product information, please fill the Information Request Form or mail to: info@lasermate.com. Return to Lasermate Corporation Home Page 5 4 10 7 G83020-AH 830 40 20 Diode Pumped Solid-State Green Laser VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | O.E.M. Diode Pumped Solid-State Green Lasers GM- series green laser modules use laser diode (808nm) pumped Yttrium Orthovanadate (Nd:YVO4) crystal coupled with Pottasium Titanyl Phosphate (KTP) as a frequency doubler generating 532 nm (green) and 1064nm (infrared). This method is gaining an increasing popularity for low power applications because of its high absorption and emission efficiencies. Lasermate Corporation provides a variety of design with the output power from 1mW to 25mW for 532nm and from 20mW to 100 mW for 1064 nm. Please see below for more information. Options GMA- Series Green Laser Module GMC- Series Green Laser Module GMP- Series Green Laser Module GMS- Series Green Laser Module GMS- Series Green Laser System Features Adjustable focus, from 1mW to 25mW output power, compact dimensions, 5VDC operating voltage, CW mode, ACC circuit with soft-start protection, with mounting screw holes, analog & TTL modulation available, low cost Fixed focus, compact dimensions, from 1mW to 25mW output power, 5VDC operating voltage, CW mode, ACC circuit with soft-start protection, analog & TTL modulation available, lower cost Fixed focus, miniature dimensions, from 1mW to 5mW output power, 3VDC operating voltage, ACC circuit with pulsed function, <1KHz, designed for laser pointer applications, lowest cost Fixed focus, compact dimensions, from 1mW to 25mW output power, 5VDC operating voltage, CW mode, ACC circuit with soft-start protection, with mounting screw holes, analog & TTL modulation available, low cost Fixed focus, from 5mW to 25mW output power, 5VDC operating voltage, CW mode, ACC circuit, with mounting screw holes, cooling fan, 5V DC-Jack connector for AC adapter plug-in, analog & TTL modulation available Diode Pumped Solid-State Green Laser If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of 532 nm Diode Pumped Solid State Green Laser Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | GMC- Series 532 nm DPSS Green Laser Modules GMC- Series 532 nm DPSS Green Laser Modules with TTL Modulations GMC- Series 532 nm DPSS Green Laser Modules with CW Mode GMC- Series 532 nm DPSS Green Laser Modules with Analog Modulations Specifications of GMC- Series 532 nm DPSS Green Laser Modules Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC Operating Current (A) Operating Voltage Circuit Design Operation Mode M2 Linewidth 0.5-0.99 1.2-3 3-5 GMC-532-XF5 532 nm TEMoo 8-10 (X=1) (X=3) <0.45 (X=5) (X=10) 11-15 16-20 21-25 (X=15) (X=20) (X=25) <0.65 5 +/- 0.5VDC ACC with soft-start protection CW <2 < 0.1 nm <0.75 Specifications of 532 nm Diode Pumped Solid State Green Laser Modules Polarization Beam Divergence Beam Diameter (1/e2) Stability* Connector Storage Temperature Optimum Operating Temperature MTTF** Dimensions (LxWxH) Linear <1.4 mrad < 1 mm 20% @ 25 3 oC Black (-) & red (+) wires 10 - 50 oC 22-28 oC 5,000 hrs Dia. 20 x L. 58.5 mm (green laser head) 32 x 16 mm (driver circuit board) 25 x 23 x 16 mm (heat sink) 43 x 43 mm (soft-start protection PCB) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMC-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. TTL Modulation of 532nm DPSS Green Laser Module Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC Operating Current (A) Operating Voltage Control Voltage Circuit Design Operation Mode Frequency 0.5-0.99 (X=1) GMC-532-XF5-T 532 nm TEMoo 3-5 8-10 11-15 1.2-3 (X=3) <0.45 (X=5) (X=15) 21-25 (X=20) (X=25) <0.65 5 VDC Max. 5VDC ACC with modulator and soft-start protection TTL From DC to 10KHz M2 Linewidth Polarization Beam Divergence Beam Diameter (1/e2) Stability* Connector Storage Temperature Optimum Operating Temperature MTTF** Dimensions (LxWxH) (X=10) 16-20 <2 < 0.1 nm Linear <1.4 mrad < 1 mm 20% @ 25 3 oC Yellow (control input), Black (-) & red (+) wires 10 - 50 oC 22-28 oC 5,000 hrs Dia. 20 x L. 58.6 mm (green laser head) 50 x 50 mm (driver circuit board) 25 x 23 x 16 mm (heat sink) <0.75 Specifications of 532 nm Diode Pumped Solid State Green Laser Modules * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMC-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Analog Modulation of 532nm DPSS Green Laser Module Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC Operating Current (A) Operating Voltage Control Voltage Circuit Design Operation Mode Frequency 0.5-0.99 (X=1) GMC-532-XF5-M 532 nm TEMoo 3-5 8-10 11-15 1.5-3 (X=3) <0.45 (X=5) (X=10) (X=15) 16-20 21-25 (X=20) (X=25) <0.65 <0.75 5 VDC Max. 5VDC ACC with modulator and soft-start protection Analog From DC to 10KHz M2 <2 Linewidth Polarization Beam Divergence Beam Diameter (1/e2) Stability* Connector Storage Temperature Optimum Operating Temperature MTTF** Dimensions (LxWxH) < 0.1 nm Linear <1.4 mrad < 1 mm 20% @ 25 3 oC Yellow (control input), Black (-) & red (+) wires 10 - 50 oC 22-28 oC 5,000 hrs Dia. 20 x L. 58.6 mm (green laser head) 50 x 50 mm (driver circuit board) 25 x 23 x 16 mm (heat sink) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. ** MTTF (mean time to failure) is based on the MTTF rating of high power 808nm laser diode used from the laser diode manufacturer. The GMC-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Note: The specification is subject to change without notice. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of 532 nm Diode Pumped Solid State Green Laser Modules Specifications of GMP- Series 532 nm DPSS Green Laser Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | GMP- Series 532 nm DPSS Green Laser Modules Specifications of GMP- Series 532 nm DPSS Green Laser Modules Model No. Wavelength Mode Output power (mW) @ 5VDC, 25 oC 0.5-0.99 (X=1) GMP-532-XF3 532 nm TEMoo 1.2-3 Operating Current (A) Operating Voltage Circuit Design Operation Mode M2 (X=3) <0.45 3V DC ACC with pulse function Pulsed <2 Linewidth Polarization Beam Divergence Beam Diameter (1/e2) Frequency Stability* Connector < 0.1 nm Linear <1.4 mrad < 1 mm <1KHz 20% @ 25 3 oC Standard: Black (-) & red (+) wires 3-5 (X=5) Specifications of GMP- Series 532 nm DPSS Green Laser Modules Storage Temperature Optimum Operating Temperature Dimensions (LxWxH) 10 - 50 oC 22 - 28 oC Dia. 12mm x L. 40mm (green laser head) 16 x 8 mm (driver circuit board) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. The GMP-series 532 nm Diode Pumped Solid State Green Laser Modules, which use laser diode pumped Nd:YVO4 crystal coupled with KTP as a frequency doubbler, are designated solely as OEM components for incorporation into the customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Diode Pumped Solid-State Green Laser VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | O.E.M. GMS- Series Diode Pumped Solid-State Green Lasers GMS- Series Diode Pumped Solid-State Green Laser Module GMS- Series Analog Modulation of Diode Pumped Solid-State Green Laser Module GMS- Series TTL Modulation of Diode Pumped Solid-State Green Laser Module GMS- Series OEM Diode Pumped Solid-State Green Laser System Diode Pumped Solid-State Green Laser Module Model No. GMS1-038 Wavelength -01 -03 -05 -10 -15 532 nm -20 -25 Diode Pumped Solid-State Green Laser Output Power @ 5V 0.5-0.99mW 1.2-3mW 3-5mW 8-10mW 12-15mW 16-20mW 21-25mW DC Mode TEMoo Linewidth <0.1nm Polarization Linear Beam Divergence 1.4 mrad Beam Diameter 1 mm Operating Voltage 5V DC Operating Mode CW Operating Current < 0.45 A < 0.45 A < 0.65 A < 0.65 A < 0.75 A < 0.75 A < 0.75 A Connector Red: + ; Black: Storage Temperature 10 - 50 oC Optimum Operating 20 - 30 oC Temperature 50 x 21 x 21 mm (Head; L X W X H) + 150 mm (wires) + 35 x 14 mm (PCB) + 25 x 23 x 16 mm (heat Dimensions sink) + 190 mm (wires) Modulatable Diode Pumped Solid-State Green Laser Module Analog Modulation of Diode Pumped Solid-State Green Laser Module Diode Pumped Solid-State Green Laser Model No. GMS1-038 -01M -03M -05M -10M -15M -20M -25M Wavelength 532 nm Output Power @ 5V DC 0.5-0.99mW 1.2-3mW 3-5mW 8-10mW 12-15mW 16-20mW 21-25mW Mode TEMoo Linewidth <0.1nm Polarization Linear Beam Divergence 1.4 mrad Beam Diameter 1 mm Operation Mode Analog modulation Operating Voltage 5V DC Control Voltage Max. 5V DC Operating Current < 0.45 A < 0.45 A < 0.65 A < 0.65 A < 0.75 A < 0.75 A < 0.75 A Connector 3 wires Yellow: control; Red: + ; Black: Storage Temperature 10 - 50 oC Optimum Operating 20 - 30 oC Temperature 50 x 21 x 21 mm (Head; L X W X H) + 150 mm (wires) + 35 x 14 mm (PCB) + 25 x 23 x 16 mm (heat sink) Dimensions + 190 mm (wires) TTL Modulation of Diode Pumped Solid-State Green Laser Module Diode Pumped Solid-State Green Laser Model No. GMS1-038 Wavelength Output Power @ 5V DC Mode Linewidth Polarization Beam Divergence Beam Diameter Operation Mode Operating Voltage Control Voltage Operating Current Connector Storage Temperature Optimum Operating Temperature Dimensions -01T -03T 0.5-0.99mW 1.2-3mW < 0.45 A < 0.45 A -05T -10T -15T 532 nm 3-5mW 8-10mW 12-15mW TEMoo <0.1nm Linear 1.4 mrad 1 mm TTL modulation 5V DC Max. 5V DC < 0.65 A < 0.65 A < 0.75 A 3 wires Yellow: control; Red: + ; Black: 10 - 50 oC -20T -25T 16-20mW 21-25mW < 0.75 A < 0.75 A 20 - 30 oC 50 x 21 x 21 mm (Head; L X W X H) + 150 mm (wires) + 35 x 14 mm (PCB) + 25 x 23 x 16 mm (heat sink) + 190 mm (wires) OEM Diode Pumped Solid-State Green Laser System Features: Soft-start protection AC adapter included No additional heat sink needed Easily to be incorporated into your laser products Model No. GMS-05A GMS-10A GMS-15A GMS-20A GMS-25A Output Power Mode 3-5mW 8-10mW 12-15mW TEMoo 16-20mW 21-25mW Diode Pumped Solid-State Green Laser Linewidth Polarization Beam Divergence Beam Diameter @ Aperture Operating Voltage Operating Current Connector Storage Temperature Optimum Operating Temperature Dimensions (LxWxH) Weight Warranty* <0.45 A <0.65 A <0.1nm Linear 1.4 mrad 1 mm 5V DC <0.75 A DC-jack 10 - 50 oC <0.75A <0.75 A 20 - 30 oC 150 x 73 x 41 mm 620 +/- 10 g 6 months * This warranty does not apply to the defects resulting from modification or misuse of products. Note: These diode pumped solid-state green lasers are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate requirments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Photodiode Receivvers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | 1064 nm Diode Pumped Solid-State Laser Module Specifications of 1064 nm Diode Pumped Solid State Laser Modules Model No. GMS-1064-10 GMS-1064-20 Wavelength 1064 nm Mode TEMoo GMS-1064-50 GMS-1064-100 Output power (mW) @ 5VDC, 25 oC 8-10 18-20 45-50 90-100 Operating Current (A) <0.45 <0.45 <0.75 <0.75 Operating Voltage 4 - 5 VDC Circuit Design ACC Operation Mode CW M2 <2 Linewidth < 0.1 nm Photodiode Receivvers Polarization Linear Beam Divergence <1.4 mrad Beam Diameter (1/e2) <1 mm Noise <1% (10-10MHz) Stability* +/- 10% @ 25 +/- 3 oC Connector Black (-) & red (+) wires Storage Temperature 10 - 50 oC Optimum Operating Temperature 20 - 30 oC Dimensions (LxWxH) 50 x 21 x 21 mm (green laser head) + 150 mm (wire) + 32 x 15 mm (driver circuit board) + 20 x 18 x 15 mm (heat sink) + 150 mm (wire) * Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Specifications of Overstock OEM Laser Diode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Overstock OEM Laser Modules with 25 % - 50% Discount LMP-6503AR: Grade A 650nm Laser, Class IIIa, APC circuit Only $29.00 each Optional Accessories: Cross hair generating lens LTC-6352AR: Grade A 635nm laser, Class IIIa (< 5 mW), APC circuit only $85.00 LTC-6502AR: Grade A 650nm laser, Class IIIa (< 5 mW), APC circuit SOLD OUT! LTG-6354AR: Grade A 635nm laser, Class IIIa (< 5 mW), APC circuit only $90.00 LTG-6504AR: Grade A 650nm laser, Class IIIa (< 5 mW), APC circuitSOLD OUT! Optional Accessories: (1) Line generating lens ( 45, 60 & 90 deg. full fan angle) (2) Cross hair generating lens (3) Comapct beam expander Specifications of Overstock LMP- Compact Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Drive circuit LMP6503AR 650 index guided class IIIa (< 5mW) 2.1 - 3.0 < 45 2.8 - 6.0 automatic power control Specifications of Overstock OEM Laser Diode Modules Protections Optics short circuit & reverse polarity protections singlet plastic collimating lens adjustable 4.5 4x71 < 0.5 elliptical wires with strain releaser 23 Focus Beam size @ aperture Beam size @ 7 m (mm) Beam divergence (mrad) Beam profile Connector Weight (gm) Operating temperature -10 to 50 (oC) Storage temperature (oC) - 40 to 85 Dimensions (mm) 11.5 (Dia.) x 40 (L) NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time brighter than the 670nm laser. 2. Fixed focus for LMP- laser modules is available, if specified. 3. The LM- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. Specifications of Overstock LTC- Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Drive circuit Protections Optics Focus Beam size @ 7 m (mm) Beam divergence (mrad) Beam profile Connector LTC6352AR 635 index guided class IIIa (< 5mW) 1.2 - 2.0 < 60 2.8 - 4.5 automatic current control short circuit & reverse polarity protections singlet plastic collimating lens adjustable dia. 5 1 < 0.5 circular wires (red + & black -) LTC6502AR SOLD OUT! 650 index guided class IIIa (< 5mW) 1.2 - 2.0 < 45 2.8 - 6.0 automatic current control short circuit & reverse polarity protections singlet plastic collimating lens adjustable dia. 5 1 < 0.5 circular wires (red + & black -) Specifications of Overstock OEM Laser Diode Modules Wire length (cm) Operating temperature (oC) Storage temperature (oC) Dimensions (inch) 10 -10 to 50 - 40 to 85 0.5 (Dia.) x 2.0 (L) 10 -10 to 50 - 40 to 85 0.5 (Dia.) x 2.0 (L) For pricing or more information, please contact us by e-mail: sales@lasermate.com or Tel: (909)718-0999. Specifications of Overstock LTG- Laser Diode Modules Model No. Wavelength (nm) Diode structure Classification Output power (mW) Operating current (mA) Operating voltage (VDC) Drive circuit LTG6354AR 635 index guided class IIIa (< 5mW) 2.5-3.5 < 60 2.8 - 4.5 automatic current control short circuit & reverse polarity Protections protections Optics 3-element glass collimating lens Focus adjustable Beam size @ 7 m (mm) 5x81 Beam divergence (mrad) < 0.5 Beam profile elliptical Connector wires (red + & black -) Wire length (cm) 10 Operating temperature (oC) -10 to 50 Storage temperature (oC) - 40 to 85 Dimensions (inch) 0.5 (Dia.) x 2.0 (L) (1) Line generating lens (45, 60 & 90 deg. full fan angle) Optional accessories (2) Cross hair generating lens (3) Comapct beam expander LTG6504AR SOLD OUT! 650 index guided class IIIa (< 5mW) 2.5 - 3.5 < 45 2.8 - 6.0 automatic current control short circuit & reverse polarity protections 3-element glass collimating lens adjustable 5x81 < 0.5 elliptical wires (red + & black -) 10 -10 to 50 - 40 to 85 0.5 (Dia.) x 2.0 (L) (1) Line generating lens (45, 60& 90 deg. full fan angle) (2) Cross hair generating lens (3) Comapct beam expander For pricing or more information, please contact us by e-mail: sales@lasermate.com or Tel: (909)718-0999. NOTES: 1. We offer the 650nm laser diode module with the same low price of 670nm laser diode module. For your information, the 650nm laser is 3.4 time Specifications of Overstock OEM Laser Diode Modules brighter than the 670nm laser. 2. The LT- series laser diode modules are designated solely as OEM components for incorporation into customer's end products. Therefore, they do not comply with the appropriate require ments of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Fiber Optics Foods for Brain Book Store FIBER OPTICS Click on title for more details and ORDER. The Complete Guide to Fiber Optic Cable System Installation ~ Usually ships in 24 hours Eric R. Pearson / Paperback / Published 1996 Our Price: $38.95 Fiber Optic Communications ~ Usually ships in 24 hours Harold B. Killen / Hardcover / Published 1991 Our Price: $98.00 Fiber Optic Communications ~ Usually ships in 24 hours Joseph C. Palais / Hardcover / Published 1998 Our Price: $77.00 Fiber Optic Communications : Systems, Analysis, and Enhancements ~ Usually ships in 24 hours Gerard Lachs, Gerald Lachs / Hardcover / Published 1998 Our Price: $70.00 Fiber Optic Installations: A Practical Guide ~ Usually ships in 24 hours Bob Chomycz / Hardcover / Published 1996 Our Price: $45.00 Fiber Optic Reference Guide : A Practical Guide to the Technology ~ Usually ships in 24 hours David R. Goff / Paperback / Published 1999 Our Price: $36.95 Fiber Optic Sensors : Proceedings of a Conference Held 8-11 September 1992, Boston, Massachusetts (Critical Reviews of Optical Science and Technology) ~ Usually ships in 2-3 days Eric Udd(Editor) / Hardcover / Published 1993 Our Price: $62.00 Fiber Optic Sensors: An Introduction for Engineers and Scientists ~ Usually ships in 24 hours Eric Udd(Editor), Iric Udd / Hardcover / Published 1991 Our Price: $145.00 Fiber Optic Smart Structures ~ Usually ships in 2-3 days Eric Udd(Editor) / Hardcover / Published 1995 Our Price: $115.00 Fiber Optic Technician's Manual ~ Usually ships in 24 hours Jim Hayes / Paperback / Published 1996 Our Price: $41.95 Fiber Optic Test and Measurement ~ Usually ships in 24 hours Fiber Optics Dennis Derickson(Editor) / Hardcover / Published 1997 Our Price: $85.00 Fiber-Optic Communication Systems (Wiley Series in Microwave and Optical Engineering) ~ Usually ships in 24 hours Govind P. Agrawal / Hardcover / Published 1997 Our Price: $92.50 Fiber-Optic Systems : Network Applications ~ Usually ships in 24 hours Terry Edwards / Paperback / Published 1989 Our Price: $160.00 Handbook of Fiber Optic Data Communication ~ Usually ships in 24 hours Casimer Decusatis(Editor), et al / Hardcover / Published 1997 Our Price: $98.00 ~ You Save: $2.00 (2%) An Introduction to Fiber Optic Systems John P. Powers / Hardcover / Published 1996 Our Price: $94.75 Introduction to Fiber Optics ~ Usually ships in 24 hours John Crisp / Paperback / Published 1997 Our Price: $28.95 Residential Fiber Optic Networks : An Engineering and Economic Analysis (The Artech House Telecommunications Library) ~ Usually ships in 24 hours David P. Reed / Hardcover / Published 1992 Our Price: $87.00 1393-1999 IEEE Standard for Spaceborne Fiber-Optic Data Bus Hardcover / Published 1999 Our Price: $66.00 (Special Order) Applications of Fiber Optic Sensors in Engineering Mechanics : A Collection of State-Of-The-Art Papers in the Applications of Fiber Optic Technologie Farhad Ansari(Editor) / Paperback / Published 1993 Our Price: $27.00 (Special Order) Broadband Hybrid Fiber/Coax Access System Technologies (Series in Telecommunications) Winston I. Way / Hardcover / Published 1998 Our Price: $95.00 (Back Ordered) Catv and Video Application of Fiber Optics (Fiber Optic Reprint Ser) ~ Usually ships in 24 hours Paperback / Published 1988 Our Price: $75.00 Components for Fiber Optic Applications II (Proceedings of Spie the International Society for Optical Engineering, Vol 839) Vincent J. Tekippe / Paperback / Published 1988 Our Price: $45.00 (Special Order) Components for Fiber Optic Applications III and Coherent Lightwave Communications/7-9 September 1988 Boston, Massachusetts (Spie Proceedings Series,) Fiber Optics Paul M. Kopera, Harish R.D. Sunak (Editor) / Paperback / Published 1989 Our Price: $59.00 (Special Order) Components for Fiber Optic Applications IV : 5-6 September 1989 Boston Massachusetts (Spie Proceedings, Vol 1176) Paul M. Kopera(Editor) / Paperback / Published 1990 Our Price: $53.00 (Special Order) Components for Fiber Optic Applications V (Proceedings of S P I E, Vol 1365) Paul M. Kopera(Editor) / Paperback / Published 1991 Our Price: $53.00 (Special Order) Components for Fiber Optic Applications VII : 10-11 September 1992 Boston, Massachusetts (Spie Proceedings, Vol 1792) Paul M. Kopera(Editor) / Paperback / Published 1993 Our Price: $56.00 (Special Order) Components for Fiber Optic Applications; 22-24 September 1986 Cambridge, Massachusetts (Spie Proceedings Volume 722) Vincent J. Tekippe / Paperback / Published 1986 Our Price: $50.00 (Special Order) Components of Fiber Optic Lans (Fiber Optic Reprint Series : Volume 5) Igi Staff / Paperback / Published 1994 Our Price: $75.00 (Special Order) Distributed & Multiplexed Fiber Optic Sensors VI Alan D. Kersey(Editor), John P. Dakin (Editor) / Paperback / Published 1996 Our Price: $66.00 (Special Order) Distributed and Multiplexed Fiber Optic Sensors : 4-5 September 1991 Boston, Massachusetts (Spie Proceedings, Vol 1586) Alan D. Kersey, John P. Daking (Editor) / Paperback / Published 1991 Our Price: $53.00 (Special Order) Distributed and Multiplexed Fiber Optic Sensors II : 10-11 September 1992 Boston, Massachusetts (Spie Proceedings, Vol 1797) John P. Dakin, Alan D. Kersey (Editor) / Paperback / Published 1993 Our Price: $56.00 (Special Order) Distributed and Multiplexed Fiber Optic Sensors III John P. Dakin(Editor), Alan D. Kersey (Editor) / Hardcover / Published 1993 Our Price: $56.00 (Not Yet Published) Distributed and Multiplexed Fiber Optic Sensors IV Alan D. Kersey(Editor), John P. Dakin (Editor) / Hardcover / Published 1994 Our Price: $56.00 (Not Yet Published) Distributed and Multiplexed Fiber Optic Sensors V : 22-23 June 1995 Munich, Frg (Spie Proceedings, Vol 2507) John P. Dakin(Editor), Alan D. Kersey (Editor) / Paperback / Published 1995 Our Price: $66.00 (Special Order) The Distributed Fibre Optic Sensing Handbook Fiber Optics John P. Dakin(Editor) / Hardcover / Published 1990 Our Price: $120.00 (Special Order) The Distributed Fibre Optic Sensing Handbook Hardcover / Published 1990 (Special Order) Fiber Optic and Laser Sensors VI Meeting Proceedings Sept 1988 Boston, Ma Paperback / Published 1989 Our Price: $59.00 (Special Order) Fiber Optic and Laser Sensors VII (Spie Proceedings, Vol 1169) Eric Udd, Ramon P. Depaula / Paperback / Published 1990 Our Price: $78.00 (Special Order) Fiber Optic Cable in Mexico: A Strategic Entry Report, 1997 (Strategic Planning Series) The Telecommunications Research Group / Ring-bound / Published 1999 Our Price: $139.00 (Special Order) Fiber Optic Cable in Thailand: A Strategic Entry Report, 1997 (Strategic Planning Series) The Telecommunications Research Group / Ring-bound / Published 1999 Our Price: $141.00 (Special Order) Fiber Optic Codec Link Design Manual/Fiber Optics User's Manual and Design Series Effects / Paperback / Published 1981 Our Price: $67.50 (Special Order) Fiber Optic Component Design, Fabrication, Testing, Operation, Reliability and Maintainability N.L. Christian, L.K. Passauer / Hardcover / Published 1989 Our Price: $109.00 (Special Order) Fiber Optic Fluorescence Thermometry K. T. V. Grattan, Z.Y. Zhang / Hardcover / Published 1995 Our Price: $115.50 (Special Order) The Fiber Optic Industry in Indonesia: A Strategic Entry Report, 1997 (Strategic Planning Series) The Telecommunications Research Group / Ring-bound / Published 1999 Our Price: $158.00 (Special Order) Fiber Optic Networks Paul E. Green / Hardcover / Published 1992 Our Price: $95.00 (Special Order) Fiber Optic Reference Guide : A Practical Guide to the Technology David R. Goff, et al / Paperback / Published 1996 Our Price: $39.95 (Special Order) Fiber Optic Sensor-Based Smart Materials and Structures : Papers Presented at the Fifth Annual Smart Materials and Structures Workshop, Blacksburg, V) Va.) Smart Materials and Structures Workshop 1992 Blacksburg / Hardcover / Published 1992 Our Price: $107.00 (Special Order) Fiber Optics Fiber Optic Sensors III : Eco1 : 21-22 September 1988 Hamburg, Federal Republic of Germany (Spie Proceedings, Vol 1011) Ralf Th. Kersten(Editor) / Paperback / Published 1989 Our Price: $51.00 (Special Order) Fiber Optic Systems for Mobile Platforms II Meeting Proceedings Sept 1988 Boston, Ma Paperback / Published 1989 Our Price: $45.00 (Special Order) Go to Author, Title, Subject Search now. | Search|Browse| Return to Lasermate Corporation Home Page 1310 nm FP laser 1x9 pins SC/ST/FC Duplex Single Mode Transceivers from 155 Mbps ATM to 1.25 Gbps Gigabit Ethernet VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | 1310nm LASER SC/ST/FC DUPLEX SINGLE MODE OPTICAL TRANSCEIVERS Data Rate from 155 Mbps to 1.25 Gbps with Loss Budget up to 33dB How To Read Model No. C13F-W-X-Y-Z C13F = Transmitter of Transceiver 1310 nm FP laser W = Data rate 155 Mbps, 622Mbps, 1.25Gbps X = Interface Connector Duplex SC, ST& FC connectors Y = Output Power / Sensitivity Output Power: from -12 to 0 dBm / Sensitivity: from <-18 to <-36 dBm Z = Supply voltage +5V & +3.3V Please click the Part No. for the more detail information. Part No. Description C13F-155-SCS5 (or -STS5/FCS5) 1310 nm FP laser, output power -12 - -8dBm, sensitivity <-32dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver (loss budget 20dB) C13F-155-SCS3 (or -STS3/FCS3) 1310 nm FP laser, output power -12 - -8dBm, sensitivity <-32dBm, supply voltage 3.3V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver (loss budget 20dB) C13F-155-SCM5 (or -STM5/FCM5) 1310 nm FP laser, output power -6 - -4dBm, sensitivity <-34dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver for Intermediate-Reach (loss budget 28dB) C13F-155-SCM3 (or -STM3/FCM3) 1310 nm FP laser, output power -6 - -4dBm, sensitivity <-34dBm, supply voltage 3.3V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver for Intermediate-Reach (loss budget 28dB) C13F-155-SCL5 (or -STL5/FCL5) 1310 nm FP laser, output power -3 - 0 dBm, sensitivity <-36dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver for Long-Reach (loss budget 33dB) 1310 nm FP laser 1x9 pins SC/ST/FC Duplex Single Mode Transceivers from 155 Mbps ATM to 1.25 Gbps Gigabit Ethernet C13F-155-SCL3 (or -STL5/FCL3) 1310 nm FP laser, output power -3 - 0 dBm, sensitivity <-36dBm, supply voltage 3.3V, SC (or ST/FC) duplex single mode 155 Mbps optical transceiver for Long-Reach (loss budget 33dB) C13F-622-SCS5 (or -STS5/FCS5) 1310 nm FP laser, output power -12 - -8 dBm, sensitivity <-30dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 622 Mbps optical transceiver (loss budget 18dB) C13F-622-SCM5 (or -STM5/FCM5) 310 nm FP laser, output power -6 - -4 dBm, sensitivity <-30dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 622 Mbps optical transceiver (loss budget 24dB) C13F-1250-SCS5 (or -STS5/FCS5) 1310 nm FP laser, output power -12 - -8 dBm, sensitivity <-18 dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 1.25 Gbps optical transceiver (loss budget 6dB) C13F-1250-SCM5 (or -STM5/FCM5) 310 nm FP laser, output power -10 - -5 dBm, sensitivity <-18 dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 1.25 Gbps optical transceiver (loss budget 8dB) C13F-1250-SCL5 (or -STL5/FCL5) 1310 nm FP laser, output power -7 - -3 dBm, sensitivity <-18 dBm, supply voltage 5V, SC (or ST/FC) duplex single mode 1.25 Gbps optical transceiver (loss budget 11dB) If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. Please update our new address/phone numbers! Lasermate Corporation 20264 E. Carrey Road, Walnut, CA 91789, USA Tel: (909) 718-0999 Fax: (909)718-0998 HOME | PRODUCT LIST | HOW TO ORDER | QUO & INFO REQUEST | 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1310 nm FP Laser 155Mbps 1x9-Pins Single Mode Optical Transceivers How To Read Model No. C13F-155-X-Y-Z C13F = Transmitter of Transceiver 1310 nm FP laser 155 = Data rate 155 Mbps X = Interface Connector Duplex SC (X= SC), Duplex ST (X= ST), Duplex FC (X= SC) Y = Output Power / Sensitivity -12 - -8 dBm/<-32 dBm (Y=S) -6 - -4 dBm/<-34 dBm (Y=M) -3 - 0 dBm/<-36 dBm (Y=L) Z = Supply voltage +5V (Z=5) & +3.3V (Z=3) FEATURES Low Cost & High performance Transmitter: 1310 nm FP laser Data Rate: 155Mbps, NRZ Power Supply Voltage: Single +5V or +3.3V Electrical Interface: Differential PECL Pin-Configuration: Industrial standard 1x9 package footprint Connector Interface: SC/ST/FC Duplex Connector Loss Budget: 20dB, 28dB & 33dB available SM Fiber: 9/125m APPLICATIONS FDDI ATM/SONET OC-3/SDH STM-1 Active Star Network Point to Point Links Fast Ethernet Absolute Maximum Ratings Parameter Supply Voltage Symbol Min. Typ. Max. Unit Note VCC 4.75 5 5.25 V + 5V version 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver 3.0 3.3 3.5 + 3.3V version Soldering Temperature --- - - 260 oC Operating Temperature Top 0 - 70 oC Storage Temperature Tst -40 - 85 oC 10 seconds on leads only Transmitter Specifications (0 oC<Top<70 oC, 4.75V <Vcc<5.25V or 3.0V<Vcc<3.5V) Parameter Symbol Min. Typ. Max. Unit Notes Po -3 --- 0 dBm Measured at the end of 100 cm length 9/125 m step index fiber cable using 155Mbps, PRBS 223-1 signal at the beginning of life. Electro-Optical Interface Optical Output Power -6 -4 -12 -8 1280 1310 1350 nm Output Spectrum Width --- 2 6 nm Extinction Ratio ER 10 --- --- dB Output Center Wavelength Output Eye Diagram RMS Compliant with ITU recommendation G.957 mask patterns Optical Rise Time (20%-80%) tr - - 3 ns Measured using 155Mbps 1010 signal. Optical Fall Time (80%-20%) tf - - 3 ns Measured using 155Mbps 1010 signal. Vcc 4.75 5 5.25 V 5 V version 3.0 3.3 3.5 Electrical Interface Supply Voltage 3.3 V version Supply Current Icc - 100 / 75 - mA 5 V version / 3.3 V version Data Input Voltage-Low VIL VCC -1.95 - VCC -1.45 V Data Input Voltage-High VIH VCC -1.17 - VCC -0.73 V Rise Time Input Signal tr - - 3 ns 20%-80% Values Fall Time Input Signal tf - - 3 ns 80%-20% Values VCC = 5.0V, TC = 25 oC Receiver Specifications (0 oC<Top<70 oC, 4.75V <Vcc<5.25V or 3.0V<Vcc<3.5V) Parameter Symbol Min. Typ. Max. Unit Notes --- --- - -36/-34/-32 dBm BER=1.0X10-10, 155Mbps, PRBS 223-1 Psat 0 - --- dBm 155Mbps, 1010 signal Pa --- -30 --- dBm 155Mbps, 1010 signal. Electro-Optical Interface Sensitivity Saturation (Average Power) Signal Detect - Asserted 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver Signal Detect - Deasserted Pd --- -33 --- dBm 155Mbps, 1010 signal. Signal Detect - Hysteresis Phys - 3 - dB 155Mbps, 1010 signal. VCCRX 4.75 3.0 5 3.3 5.25 3.5 V 5V version 3.3V version ICCRX - 140 / 75 - mA Data Output Voltage- Low VOL VCCRX-1.81 - VCCRX-1.62 V Data Output Voltage- High VOH VCCRX-1.03 - VCCRX-0.88 V Output load resistor (RL = 50 ohm) is connected to VCCRX - 2.0V. VCCRX = 5.0V (or 3.3V), Tc=25 oC Rise Time Output Signal trout - - 1.6 ns 20%-80% Values Fall Time Output Signal tfout - - 1.6 ns 80%-20% Values Electrical Interface Supply Voltage Power Supply Current 5V version/3.3V version. The current excludes the output load current. Please click below for more information. Pin Configuration Package Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1310 nm & 1550 nm Single Mode Optical Transceiver functional block diagram, pinout & dimensions VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | 1310 nm & 1550 nm Single Mode Optical Transceiver Functional Block Diagram PIN Assignment (Top View) 1310 nm & 1550 nm Single Mode Optical Transceiver functional block diagram, pinout & dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1310 nm FP Laser 622Mbps 1x9-Pins Single Mode Optical Transceivers How To Read Model No. C13F-622-X-Y-Z C13F = Transmitter of Transceiver 1310 nm FP laser 622 = Data rate 622 Mbps X = Interface Connector Duplex SC (X= SC), Duplex ST (X= ST), Duplex FC (X= SC) Y = Output Power / Sensitivity -12 - -8 dBm/<-30 dBm (Y=S) -6 - -4 dBm/<-30 dBm (Y=M) Z = Supply voltage +5V (Z=5) FEATURES Low Cost & High performance Transmitter: 1310 nm FP laser Data Rate: 622Mbps, NRZ Power Supply Voltage: Single +5V Electrical Interface: Differential PECL Pin-Configuration: Industrial standard 1x9 package footprint Connector Interface: SC/ST/FC Duplex Connector Loss Budget: 18dB & 24dB available SM Fiber: 9/125m APPLICATIONS FDDI ATM/SONET OC-12/SDH STM-4 Data Communication Network Point to Point Links Absolute Maximum Ratings Parameter Supply Voltage Soldering Temperature Symbol Min. Typ. Max. Unit VCC 4.75 5 5.25 V --- - - 260 oC Note 10 seconds on leads only 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver Operating Temperature Top 0 - 70 oC Storage Temperature Tst -40 - 85 oC Transmitter Specifications (0 oC<Top<70 oC, 4.75V <Vcc<5.25V) Parameter Symbol Min. Typ. Max. Unit Notes Po -6 --- -4 dBm Measured at the end of 100 cm length 9/125 m step index fiber cable using 622Mbps, PRBS 223-1 signal at the beginning of life. Electro-Optical Interface Optical Output Power -12 -8 1280 1310 1350 nm Spectrum Width --- 2 6 nm Extinction Ratio ER 8.2 --- --- dB Supply Voltage Vcc 4.75 5 5.25 V Supply Current Icc - 170 - mA Data Input Voltage-Low VIL - V Data Input Voltage-High VIH VCC -1.95 VCC -1.17 ns 20%-80% Values ns 80%-20% Values Output Center Wavelength RMS Electrical Interface Rise Time Input Signal tr - - VCC -1.45 VCC -0.73 1 Fall Time Input Signal tf - - 1 - VCCTX = 5.0V, TC = 25 oC V Receiver Specifications (0 oC<Top<70 oC, 4.75V <Vcc<5.25V) Parameter Symbol Min. Typ. Max. Unit Notes Sensitivity --- --- - -30 dBm Signal Detect - Deasserted Signal Detect - Hysteresis Electrical Interface Pd -40 - -30 dBm Phys 0.5 6 dB VCCRX 4.75 5 5.25 V Power Supply Current ICCRX - 110 - mA The current excludes the output load current. Data Output VoltageLow Data Output VoltageHigh Rise Time Output Signal VOL VCCRX-1.81 - VCCRX-1.62 V VOH VCCRX-1.03 - VCCRX-0.88 V Output load resistor (RL = 50 ohm) is connected to VCCRX - 2.0V. VCCRX = 5.0V, Tc=25 oC trout - - 1 ns 20%-80% Values Electro-Optical Interface Supply Voltage BER=1.0X10-12, 622Mbps, PRBS 223-1 622Mbps, 1010 signal. 622Mbps, 1010 signal. 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver Fall Time Output Signal tfout - - 1 ns 80%-20% Values Please click below for more information. Pin Configuration Package Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1310 nm FP Laser 1.25Gbps 1x9 Single Mode Optical Transceivers Model No. C13F-1250-X-Y-Z C13F = Transmitter 1310 nm FP laser 1250 = Data rate 1.25 Gbps X = Interface Connector Duplex SC (X= SC), Duplex ST (X= ST), Duplex FC (X= SC) Y = Output Power / Sensitivity -12 - -8 dBm/<-18 dBm (Y=S) -10 - -5 dBm/<-18 dBm (Y=M) -7 - -3 dBm/<-18 dBm (Y=L) +5V (Z=5) Z = Supply voltage FEATURES Low Cost & High performance Transmitter: 1310 nm FP laser Data Rate: 1.25 Gbps, NRZ Power Supply Voltage: Single +5V Electrical Interface: Differential PECL Pin-Configuration: Industrial standard 1x9 package footprint Connector Interface: SC/ST/FC Duplex Connector Loss Budget: 6dB, 8dB & 11dB available SM Fiber: 9/125m APPLICATIONS Gigabit Ethernet Fiber Channel Data Communication Networks ATM-Switches Absolute Maximum Ratings Parameter Supply Voltage Symbol Min. Typ. Max. Unit Note VCC 4.75 5 5.25 V + 5V version 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver Soldering Temperature --- Operating Temperature Top Storage Temperature Tst 260 oC 0 70 oC -40 85 oC 10 seconds on leads only Transmitter Specifications (0 oC<Top<70 oC, 4.75V<Vcc<5.25V) Parameter Symbol Min. Typ. Max. Unit Po -7 --- -3 dBm Notes Electro-Optical Interface Optical Output Power -10 -5 -12 -8 1280 1310 1340 nm Output Spectrum Width --- 2 5 nm Relative Intensive Noise RIN -117 dB/Hz Extinction Ratio ER --- dB Output Center Wavelength 9 --- Measured at the end of 100 cm length 9/125 m step index fiber cable using 1.25Gbps, PRBS 27-1 signal at the beginning of life. RMS Measured using 1.25Gbps 1010 signal Optical Rise Time (20%-80%) tr 260 ps Measured using 1.25Gbps 1010 signal. Optical Fall Time (80%-20%) tf 260 ps Measured using 1.25Gbps 1010 signal. 5.25 V Electrical Interface Supply Voltage Vcc 4.75 5 Supply Current Icc Data Input Voltage-Low VIL VCC -1.95 VCC -1.45 V Data Input Voltage-High VIH VCC -1.17 VCC -0.73 V Max. Unit 170 mA VCC = 5.0V, TC = 25 oC Receiver Specifications (0 oC<Top<70 oC, 4.75V<Vcc<5.25V) Parameter Symbol Min. Typ. Notes Sensitivity --- --- -18 dBm Detecting range 1270 1355 nm Signal Detect - Asserted Pa --- --- -18 dBm 1.25Gbps, 1010 signal. Signal Detect -Deasserted Pd - 29 --- --- dBm 1.25Gbps, 1010 signal. Signal Detect -Hysteresis Phys dB 1.25Gbps, 1010 signal. Electro-Optical Interface 3 BER=1.0X10-12, 1.25Gbps, PRBS 27-1 1310 nm FP Laser 155Mbps Single Mode Optical Transceiver Electrical Interface Supply Voltage VCCRX Power Supply Current 4.75 ICCRX 5 5.25 110 V mA The current excludes the output load current. Output load resistor (RL = 50 ohm) is connected to VCCRX - 2.0V. VCCRX = 5.0V, Tc=25 oC Data Output Voltage--Low VOL VCCRX-1.81 VCCRX-1.62 V Data Output Voltage--High VOH VCCRX-1.03 VCCRX-0.88 V Please click below for more information. Pin Configuration Package Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1550 nm FP Laser 155Mbps Single Mode Optical Transceiver VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 1550 nm FP Laser 155Mbps 1x9 Single Mode Optical Transceivers Read Model No. C15F-155-X-Y-Z C15F = Transmitter 1550 nm FP laser 155 = Data rate 155 Mbps X = Interface Connector Duplex SC (X= SC), Duplex ST (X= ST), Duplex FC (X= SC) Y = Output Power / Sensitivity -12 - -8 dBm/<-32 dBm (Y=S) -6 - -4 dBm/<-34 dBm (Y=M) Z = Supply Voltage +5V (Z=5) FEATURES Low Cost & High performance Transmitter: 1550 nm FP laser Data Rate: 155Mbps, NRZ Power Supply Voltage: Single +5V Electrical Interface: Differential PECL Pin-Configuration: Industrial standard 1x9 package footprint Connector Interface: SC/ST/FC Duplex Connector Loss Budget: 20dB & 28dB SM Fiber: 9/125m APPLICATIONS FDDI ATM/SONET OC-3/SDH STM-1 Active Star Network Point to Point Links Fast Ethernet Absolute Maximum Ratings Parameter Supply Voltage Symbol Min. Typ. Max. Unit VCC 4.75 5 5.25 V 260 oC Soldering Temperature --- Operating Temperature Top 0 70 oC Storage Temperature Tst -40 85 oC Note 10 seconds on leads only 1550 nm FP Laser 155Mbps Single Mode Optical Transceiver Transmitter Specifications (0 oC<Top<70 oC, 4.75V<Vcc<5.25V) Parameter Symbol Min. Typ. Max. Unit Notes Po -6 --- -4 dBm Measured at the end of 100 cm length 9/125 m step index fiber cable using 155Mbps, PRBS 223-1 signal at the beginning of life. Electro-Optical Interface Optical Output Power -12 -8 1520 1550 1580 nm Output Spectrum Width --- 2 6 nm Extinction Ratio ER 10 --- --- dB Output Center Wavelength Output Eye Diagram RMS Compliant with ITU recommendation G.957 mask patterns Optical Rise Time (20%-80%) tr 3 ns Measured using 155Mbps 1010 signal. Optical Fall Time (80%-20%) tf 3 ns Measured using 155Mbps 1010 signal. 5.25 V Electrical Interface Supply Voltage Vcc 4.75 5 Supply Current Icc Data Input Voltage-Low VIL VCC -1.95 VCC -1.45 V Data Input Voltage-High VIH VCC -1.17 VCC -0.73 V 100 mA VCC = 5.0V, TC = 25 oC Rise Time Input Signal tr 3 ns 20%-80% Values Fall Time Input Signal tf 3 ns 80%-20% Values Receiver Specifications (0 oC<Top<70 oC, 4.75V<Vcc<5.25V) Parameter Symbol Min. --- Typ. Max. Unit Notes --- -32 dBm BER=1.0X10-10, 155Mbps, PRBS 223-1 Psat 0 -34 --- dBm 155Mbps, 1010 signal Signal Detect - Asserted Pa --- -30 --- dBm 155Mbps, 1010 signal. Signal Detect -Deasserted Pd --- -33 --- dBm 155Mbps, 1010 signal. Signal Detect -Hysteresis Phys dB 155Mbps, 1010 signal. Electro-Optical Interface Sensitivity Saturation (Average Power) 3 Electrical Interface Supply Voltage Power Supply Current VCCRX 4.75 ICCRX 5 5.25 140 V mA The current excludes the output load current. Data Output Voltage--Low VOL VCCRX-1.81 VCCRX-1.62 V Data Output Voltage--High VOH VCCRX-1.03 VCCRX-0.88 V Output load resistor (RL = 50 ohm) is connected to VCCRX - 2.0V. VCCRX = 5.0V, Tc=25 oC Rise Time Output Signal trout 1.6 ns 20%-80% Values Fall Time Output Signal tfout 1.6 ns 80%-20% Values 1550 nm FP Laser 155Mbps Single Mode Optical Transceiver Please click below for more information. Pin Configuration Package Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | GaAs PIN Photodiode for 500nm - 850 nm Emitter Please click the item of interest below for more information. GaAs PIN Photodiode in TO-46 Package Pre-amplified GaAs PIN-TIA Photodiode Receiver in TO-46 Package from 100Mbps to 2.5Gbps Connectorized GaAs PIN Photodiode in FC/SC/ST Receptacles Connectorized Pre-amplified GaAs PIN-TIA Photodiode in FC/SC/ST Receptacles from 100Mbps to 1.25Gbps If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode in TO-46 Package for 850 nm Emitter Model No. PDT-A85A30 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * High coupling efficiency to multi-mode fibers directly. * Low dark current and low capacitance. * Bandwidth > 1.5 GHz. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Responsivity (1) Forward Current Dark Current Breakdown Voltage Capacitance (2) SYMBOL R IF ID VBD C MIN - TYP MAX 0.3 0.4 100 - - - 1 85 1.2 2 1.5 UNIT A/W A nA V pF TEST CONDITIONS VR=5V, = 850 nm VF=1V VR=5V IR=10A VR=5V, f=1 MHz Notes: 1. The responsivity is measured with a receptacle package, using an 850 nm VCSEL as the optical light source to the 50/125 or 62.5/125 m multi-mode fibers. 2. Sensitive area is typical 120m in diameter. ABSOLUTE MAXIMUM RATINGS: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature Outline Dimensions: Unit: mm MIN -40 -20 MAX 125 85 260 UNIT C C C CONDITIONS 10 seconds GaAs PIN Photodiode for 850 nm Emitter GaAs PIN Photodiode for 850 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode Plus AGC Pre-amplifiers GaAs PIN Photodiode Plus AGC Pre-amplifier for 100/155 Mbps applications GaAs PIN Photodiode Plus AGC Pre-amplifier for 1.25 Gbps applications GaAs PIN Photodiode Plus AGC Pre-amplifier for 2.5 Gbps applications If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode Plus AGC Pre-amplifier for 100/155 Mbps applications Model No. PDT-A85P40 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth > 115 MHz for 100/155 Mbps applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current DC Output Voltage Differential Output Voltage Data out Rise Time (10 - 90%) Data out Fall Time (10 - 90%) Pulse Width Distortion Output Overshoot Output Resistance Bandwidth Max. Input Power SYMBOL VCC ICC VODC Vd Tr Tf PWD Rout BW PInmax MIN TYP 4.5 5 - Max 5.5 35 3.5 1.2 4.5 4.5 1 3 - 50 125 0 - UNIT V mA V V ns ns ns % Ohms MHz dBm - -33 - dBm - - 1.5 2.5 - - 115 Sensitivity 3 3 ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -40 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds TEST CONDITIONS no loads = 850 nm, 0 dBm = 850 nm, 155 Mbps = 850 nm, 155 Mbps, BER 10-10 GaAs PIN Photodiode Plus AGC pre-amplifier for 850 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier for 1.25 Gbps Applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode Plus AGC Pre-amplifier for 1.25 Gbps Applications Model No. PDT-A85P41 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth typical 920 MHz for 1.25 Gbps applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current Maximum Differential Output Voltage MIN TYP 3.0 26 Max 5.5 50 UNIT TEST CONDITIONS V mA no loads Vd 185 250 415 mVp-p = 850 nm, P= 0 dBm Differential Responsivity Rd 1.1 1.4 1.7 mV/W Single Ended Responsivity Rs 0.5 0.7 0.8 BW LF Tr/Tf Ro 750 1100 48 - 920 44 300 50 390 770 50 - Small-Signal Bandwidth Low-Frequency Cut Off Rise Time/Fall Time (20 - 80%) Single Ended Output Impedance RMS Input Referred Noise RMS Output Referred Noise Power Supply Rejection Ratio Wavelength SYMBOL VCC ICC Vn PSRR 400 52 520 1.6 860 ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -40 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds mV/W MHz kHz ps Ohms nW mV dB nm Rload = 100 ohm, P=-15 dBm @ 50 MHz, 850 nm Rload = 50 ohm, P=-15 dBm @ 50 MHz, 850 nm 20 - 80% P = 0 dBm GaAs PIN Photodiode Plus AGC pre-amplifier for 1.25 Gbps Applications Pinout: (Bottom view) ____ 1. Dout 2. Dout 3. Vcc 4. Gnd If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier for 2.5 Gbps Applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode Plus AGC Pre-amplifier for 2.5 Gbps Applications Model No. PDT-A85P42 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth typical 1900 MHz for 2.5 Gbps applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current Maximum Differential Output Voltage MIN TYP 3.0 26 Max 5.5 50 UNIT TEST CONDITIONS V mA no loads Vd 185 250 415 mVp-p = 850 nm, P= 0 dBm Differential Responsivity Rd 0.7 0.9 1.1 mV/W Single Ended Responsivity Rs 0.35 0.45 0.55 mV/W BW LF Tr/Tf Ro 1530 1900 44 300 48 50 800 50 770 - 2400 400 52 1200 1.6 860 MHz kHz ps Ohms nW mV dB nm Small-Signal Bandwidth Low-Frequency Cut Off Rise Time/Fall Time (20 - 80%) Single Ended Output Impedance RMS Input Referred Noise RMS Output Referred Noise Power Supply Rejection Ratio Wavelength SYMBOL VCC ICC Vn PSRR ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -40 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds Rload = 100 ohm, P=-15 dBm @ 50 MHz, 850 nm Rload = 50 ohm, P=-15 dBm @ 50 MHz, 850 nm 20 - 80% P = 0 dBm - GaAs PIN Photodiode Plus AGC pre-amplifier for 2.5 Gbps Applications Pinout: (Bottom view) ____ 1. Dout 2. Dout 3. Vcc 4. Gnd If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized GaAs PIN Photodiode for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode in Metallic ST/SC/FC Receptacle Model No. RST-M85A306 / RSC-M85A306 / RFC-M85A306 FEATURES: * Industry standard connector of metallic ST/SC/FC receptacle. * Prealigned for 62.5/125 m & 50/125 m multi-mode fibers. * Low dark current and low capacitance. * Bandwidth > 1.5 GHz. RST-M85A306 RSC-M85A306 RFC-M85A306 ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Responsivity (1) Dark Current Breakdown Voltage Capacitance (2) SYMBOL R ID VBD C MIN TYP MAX 0.35 0.4 1 2 50 85 1.2 1.5 - UNIT A/W nA V pF TEST CONDITIONS VR=5V, = 850 nm VR=5V IR=10A VR=5V, f=1 MHz Notes: 1. The responsivity is measured with a receptacle package, using an 850 nm VCSEL as the optical light source to the 50/125 or 62.5/125 m multi-mode fibers. 2. Sensitive area is typical 120m in diameter. ABSOLUTE MAXIMUM RATINGS: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature MIN -40 -20 MAX 125 85 260 UNIT C C C CONDITIONS 10 seconds Outline Dimensions: Unit: mm RST-M85A306 RSC-M85A306 Connectorized GaAs PIN Photodiode for 850 nm Emitter RFC-M85A306 Connectorized GaAs PIN Photodiode for 850 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier in ST/SC Receptacle for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | GaAs PIN Photodiode Plus AGC Pre-amplifier in ST/SC Receptacle Model No. RST-P85P406 / RSC-M85P406 FEATURES: * Industry standard connector of ST/SC receptacle. * Prealigned for 62.5/125 m 50/125 m multi-mode fiber. * Solution of short-wavelength 10/100/155 Mbps applications. RST-P85P406 RSC-M85P406 ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current DC Output Voltage Differential Output Voltage Data out Rise Time (10 - 90%) Data out Fall Time (10 - 90%) Pulse Width Distortion Output Overshoot Output Resistance Bandwidth Max. Input Power SYMBOL VCC ICC VODC Vd Tr Tf PWD MIN 4.5 TYP 5 - Max 5.5 35 3.5 1.2 4.5 4.5 1 3 - 50 125 0 - UNIT V mA V V nS nS nS % Ohms MHz dBm - -32 -27 dBm - - 1.5 2.5 - - Rout BW PInmax 3 3 - Sensitivity ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -20 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds TEST CONDITIONS no loads = 850 nm, 0 dBm = 850 nm, 155 Mbps = 850 nm, 155 Mbps, BER 10-10 GaAs PIN Photodiode Plus AGC pre-amplifier in ST/SC Receptacle for 850 nm Emitter RST-P85P406 RSC-M85P406 If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode Receivvers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode for 850 nm - 1300 nm Emitters Please click the item of interest below for more information. InGaAs PIN Photodiode in TO-46 Package Pre-amplified InGaAs PIN Photodiode in TO-46 Package Connectorized InGaAs PIN Photodiode in FC/SC/ST Receptacles Connectorized Pre-amplified InGaAs PIN Photodiode in FC/SC/ST Receptacles If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode for 1300 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode in TO-46 Package for 1300 nm Emitter Model No. PDT-A13A30 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * High coupling efficiency to multi-mode fibers directly. * Low dark current and low capacitance. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Responsivity (1) Forward Current Dark Current Breakdown Voltage Capacitance (2) SYMBOL R IF ID VBD C MIN TYP MAX 0.8 0.9 100 1 2 55 1.5 1.7 - UNIT A/W A nA V pF TEST CONDITIONS VR=5V, = 1300 nm VF=1V VR=5V IR=10A VR=5V, f=1 MHz Notes: 1. The responsivity is measured with a receptacle package, using an 1300 nm LED as the optical light source to the fiber. 2. Sensitive area is typical 120m in diameter. ABSOLUTE MAXIMUM RATINGS: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature MIN -40 -20 MAX 125 85 260 UNIT C C C CONDITIONS 10 seconds InGaAs PIN Photodiode for 1300 nm Emitter Outline Dimensions: Unit: mm Fig. 1 Typical Forward Current and Dark Current Fig. 2 Typical Photo-Current InGaAs PIN Photodiode for 1300 nm Emitter Fig. 3 Typical Breakdown Curve Fig. 4 Typical C-V Curve If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode for 1300 nm Emitter InGaAs PIN Photodiode Plus AGC pre-amplifier for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode Plus AGC Pre-amplifiers InGaAs PIN Photodiode Plus AGC Pre-amplifier for 100/155 Mbps applications InGaAs PIN Photodiode Plus AGC Pre-amplifier for 1.25 Gbps applications InGaAs PIN Photodiode Plus AGC Pre-amplifier for 2.5 Gbps applications If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode Plus AGC pre-amplifier for 1300 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode Plus AGC Pre-amplifier Model No. PDT-A13P40 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth > 115 MHz. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current DC Output Voltage Differential Output Voltage Data out Rise Time (10 - 90%) Data out Fall Time (10 - 90%) Pulse Width Distortion Output Overshoot Output Resistance Bandwidth Max. Input Power SYMBOL VCC ICC VODC Vd Tr Tf PWD Rout BW PInmax MIN 4.5 TYP 5 - Max 5.5 35 3.5 1.2 4.5 4.5 1 3 - 50 125 3 - UNIT V mA V V ns ns ns % Ohms MHz dBm - - 1.5 2.5 - - - -33 -31 dBm 3 3 115 Sensitivity ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -20 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds TEST CONDITIONS no loads = 1300 nm, 0 dBm = 1300 nm, 155 Mbps = 1300 nm, 155 Mbps, BER 10-10 InGaAs PIN Photodiode Plus AGC pre-amplifier for 1300 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier for 1.25 Gbps Applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode Plus AGC Pre-amplifier for 1.25 Gbps Applications Model No. PDT-A13P41 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth typical 920 MHz for 1.25 Gbps applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current Maximum Differential Output Voltage MIN TYP 3.0 26 Max 5.5 50 UNIT TEST CONDITIONS V mA no loads Vd 185 250 415 mVp-p Differential Responsivity Rd 1.9 2.5 3.0 Single Ended Responsivity Rs 0.9 1.2 1.5 BW LF Tr/Tf Ro 750 1100 48 - 920 44 300 50 220 1270 50 - Small-Signal Bandwidth Low-Frequency Cut Off Rise Time/Fall Time (20 - 80%) Single Ended Output Impedance RMS Input Referred Noise RMS Output Referred Noise Power Supply Rejection Ratio Wavelength SYMBOL VCC ICC Vn PSRR 400 52 290 1.6 1380 ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -40 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds P= 0 dBm Rload = 100 ohm, mV/W P=-15 dBm @ 50 MHz, 1300 nm Rload = 50 ohm, mV/W P=-15 dBm @ 50 MHz, 130 nm MHz kHz ps 20 - 80% Ohms nW mV P = 0 dBm dB nm GaAs PIN Photodiode Plus AGC pre-amplifier for 1.25 Gbps Applications Pinout: (Bottom view) ____ 1. Dout 2. Dout 3. Vcc 4. Gnd If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode Plus AGC pre-amplifier for 2.5 Gbps Applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode Plus AGC Pre-amplifier for 2.5 Gbps Applications Model No. PDT-A13P42 FEATURES: * Industry standard TO-46 package with cap lens. * Optimized for fiber optic application. * Bandwidth typical 1900 MHz for 2.5 Gbps applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current Maximum Differential Output Voltage MIN TYP 3.0 26 Max 5.5 50 UNIT TEST CONDITIONS V mA no loads Vd 185 250 415 mVp-p P= 0 dBm Differential Responsivity Rd 1.3 1.6 1.9 Single Ended Responsivity Rs 0.6 0.8 0.9 Small-Signal Bandwidth Low-Frequency Cut Off Rise Time/Fall Time (20 - 80%) Single Ended Output Impedance RMS Input Referred Noise Power Supply Rejection Ratio Wavelength SYMBOL VCC ICC BW LF Tr/Tf Ro 1500 1900 44 300 48 50 500 50 1270 - PSRR 2100 400 52 650 1380 ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -40 85 Lead Solder Temperature 260 Outline Dimensions: Unit: mm UNIT C C C CONDITIONS 10 seconds Rload = 100 ohm, mV/W P=-15 dBm @ 50 MHz, 1300 nm Rload = 50 ohm, mV/W P=-15 dBm @ 50 MHz, 1300 nm MHz kHz ps 20 - 80% Ohms nW dB nm - InGaAs PIN Photodiode Plus AGC pre-amplifier for 2.5 Gbps Applications Pinout: (Bottom view) ____ 1. Dout 2. Dout 3. Vcc 4. Gnd If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized InGaAs PIN Photodiode for 1300 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode in Metallic ST/SC/FC Receptacle Model No. RST-M13A306 / RSC-M13A306 / RFC-M13A306 FEATURES: * Industry standard connector of metallic ST/SC/FC receptacle. * Prealigned for 62.5/125 m & 50/125 m multi-mode fibers. * Low dark current and low capacitance. * Bandwidth > 1.5 GHz. RST-M13A306 RSC-M13A306 RFC-M13A306 ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Responsivity (1) Responsivity (2) Dark Current Breakdown Voltage Capacitance (3) SYMBOL R R ID VBD C MIN 0.6 - TYP MAX 0.8 0.25 1 2 55 1.5 1.7 UNIT A/W A/W nA V pF TEST CONDITIONS VR=5V, = 1300 nm VR=5V, = 850 nm VR=5V IR=10A VR=5V, f=1 MHz Notes: 1. The responsivity is measured with a receptacle package, using an 1300 nm LED as the optical light source to the 50/125 or 62.5/125 m multi-mode fibers. 2. The responsivity is measured with a receptacle package, using an 850 nm VCSEL as the optical light source to the 50/125 or 62.5/125 m multi-mode fibers. 3. Sensitive area is typical 120m in diameter. ABSOLUTE MAXIMUM RATINGS: PARAMETERS Storage Temperature Operating Temperature Lead Solder Temperature MIN -40 -20 MAX 125 85 260 UNIT C C C CONDITIONS 10 seconds Outline Dimensions: Unit: mm RST-M13A306 RSC-M13A306 Connectorized InGaAs PIN Photodiode for 1300 nm Emitter RFC-M13A306 Connectorized InGaAs PIN Photodiode for 1300 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | GaAs PIN Photodiode Plus AGC pre-amplifier in ST/SC Receptacle for 850 nm Emitter VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode Plus AGC Pre-amplifier in ST/SC Receptacle Model No. RST-P13P406 / RSC-M13P406 FEATURES: * Industry standard connector of ST/SC receptacle. * Prealigned for 62.5/125 m & 50/125 m multi-mode fiber. * Solution of short-wavelength 10/100/155 Mbps applications. RST-P13P406 RSC-M13P406 ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS Power Supply Supply Current DC Output Voltage Differential Output Voltage Data out Rise Time (10 - 90%) Data out Fall Time (10 - 90%) Pulse Width Distortion Output Overshoot Output Resistance Bandwidth Max. Input Power SYMBOL VCC ICC VODC Vd Tr Tf PWD MIN 4.5 TYP 5 - Max 5.5 35 3.5 1.2 4.5 4.5 1 3 - 50 125 3 - UNIT V mA V V nS nS nS % Ohms MHz dBm - -33 -31 dBm - - 1.5 2.5 - - Rout BW PInmax 3 3 - Sensitivity ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX Storage Temperature -40 100 Operating Temperature -20 85 Lead Solder Temperature 260 UNIT C C C CONDITIONS 10 seconds Outline Dimensions: Unit: mm RST-P13P406 RSC-M13P406 TEST CONDITIONS no loads = 1300 nm, 0 dBm = 1300 nm, 155 Mbps = 1300 nm, 155 Mbps, BER 10-10 GaAs PIN Photodiode Plus AGC pre-amplifier in ST/SC Receptacle for 850 nm Emitter If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | InGaAs PIN Photodiode Receivers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode for 1310 nm - 1550 nm Emitters Please click the item of interest below for more information. InGaAs/InP PIN Photodiode in TO-46 Package Pre-amplified InGaAs/InP PIN Photodiode in TO-46 Package Connectorized InGaAs/InP PIN Photodiode in FC/SC/ST Receptacles & Pigtails Connectorized Pre-amplified/InP InGaAs PIN Photodiode in FC/SC/ST Receptacles & Pigtails If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Photodiode Receivvers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | InGaAs PIN Photodiode for 1310 nm - 1550 nm Emitters Model No. R-13-075-G-B R-13-300-G-B APPLICATIONS Connector receptacle module Coaxial pigtailed module Data and Telecommunication FEATURES InGaAs/InP PIN Photodiode High responsivity at 1310 and 1550 nm Low dark current Fast pulse response -40 to 85 oC operating temperature Hermetically sealed 3-pin metal case 75 m or 300 m active diameter PACKAGING TO-46 package with integrated ball lens cap Absolute Maximum Ratings (TC=25oC) Parameter Symbol Reverse Voltage VR Forward Current IF Reverse Current IR Operating Temperature TC Storage Temperature Tstg Value 20 2 1 -40 ~ 85 -40 ~ 85 Optical & Electrical Characteristics (TC=25oC, unless otherwise noted) Unit V mA mA oC oC Photodiode Receivvers Parameter Symbol R-13-075-G-B Active Area(Dia.) -- Min. -- Detection Range -- 1000 1310 1650 Responsivity R 0.8 0.85 -- 0.8 Dark Current Idark -- 0.4 0.8 Capacitance C -- 0.7 Rise/Fall Time tr/tf -- -- Bandwidth BW 2 -- Typ. R-13-300-G-B 75 Max. Min. -- -- Typ. Max. 300 -- 1000 1310 Unit Test Condition -- m -- 1650 nm 0.85 -- A/W -- 2 5 nA VR=5V 0.9 -- 6 10 pF VR=5V 0.3 -- 1 -- ns VR=5V, 10% ~ 90% GHz VR=5V 0.5 ---- VR=5V, = 1300nm * ESD precautions must be taken when handling this unit. Note: Specification subject to change without notice. Outline Dimensions: Pinout: If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Photodiode Receivvers Preamplified InGaAs PIN Photodiode Detector VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | Preamplified InGaAs PIN Photodiode for 1310 nm - 1550 nm Emitters 155 Mbps PIN-TIA RECEIVER T-13-155-G-AGC APPLICATIONS ATM 155Mb/s receiver/transceiver Fast Ethernet 100 Mb/s receiver/transceiver FEATURES InGaAs PIN photodetector with transimpedance amplifier High sensitivity with AGC Differential or single ended output Single +5V operation -40oC to 85oC operating temperature PACKAGING Integrated 4-pin TO-46 package Absolute Maximum Ratings (TC=25oC) Item Supply Voltage Operating Temperature Storage Temperature Symbol Vcc Topr Tstg DC Electrical Characteristics (TC=25oC) Value 6 -40 ~ 85 -40 ~ 85 Unit V oC oC Preamplified InGaAs PIN Photodiode Detector Item Symbol T-13-155-G-AGC Unit Min. Typ. Max. 5.0 5.5 Power Supply Vcc 4.5 V Output Offset Voltage Vos Vcc-3.5 Differential Output Voltage Vd -- 1 -- V Supply Current (no load) Icc -- -- 35 mA Vcc-2.5 Vcc-1.5 V AC/Optical & Electrical Characteristics (Vcc=5V, TC=25oC, RL=50 , =1310nm, all optical data refer to a coupled 9/125 m SM fiber) Item Gain Single Ended Differential Symbol G Min. 0.09 0.17 120 -- -3 -- Bandwidth BW Sensitivity S Saturation Power Psat Output Resistance Rout * ESD precautions must be taken when handling this unit. Note: Specification subject to change without notice. T-13-155-G-AGC Typ. Max. -- 110 -- 220 -- 140 -38 -35 0 -- 50 65 Unit V/mW If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | MHz dBm dBm ohm Connectorized InGaAs/InP PIN Photodiode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Connectorized InGaAs/InP PIN Photodiode Modules Read Model No. R13 = Receiver X = Package Y = Connector Z = Fiber R13-XYZ InGaAs/InP PIN photodiode for 1310 nm & 1550 nm Receptacle (X= R) Pigtail (X = P) For Pigtail: None (Y= NO); FC/PC (Y=FC); SC/PC (Y=SC); ST/PC (Y=ST); FC/APC (Y=FA); SC/APC (Y=CA); ST/APC (Y=TA) For Receptacle: FC (Y=FC); SC (Y=SC); ST (Y=ST) 9/125 m SM fiber(Z=1) 50/125 m MM fiber(Z=2) 62.5/125 m MM fiber(Z=3) Features InGaAs/InP PIN Photodiode Sensitive receiver at 1310 nm & 1550 nm Low dark current Fast pulse response -40 ~85 oC operating temperature Hermetically sealed 3-pin metal case Applications LANS FDDI SONET OC-3/SDH STM-1 SONET OC-12/SDH STM-4 SONET OC-24/SDH STM-8 SDH-DLC Power Meter Packaging FC/ST/SC receptacle package SM/MM fiber pigtailed with optional FC/ST/SC connector Connectorized InGaAs/InP PIN Photodiode Modules Absolute Maximum Ratings(Tc=25 oC) Parameter Symbol Value Unit Supply Reverse voltage VR 30 V Forward Current IF 5 mA Reverse Current IR 1 mA Operating Temperature Top -40~+85 oC Storage Temperature Tstg -40~+85 oC Optical and Electrical Characteristics (Tc=25 oC) Parameter Symbol Detection Range Min. Typ. Max. Unit Test condition 1100 - 1650 nm - Responsivity R 0.8 0.85 - A/W VR=5V, =1300nm Dark Current Idark - 0.5 3 nA VR=5V Capacitance C - - 1 pF VR=5V Tr /Tf - - 1.15 ns VR=5V, 20%~80% 1 - GHz VR=5V Rise/Fall Time Bandwidth BW Please click below for more information. Pinout & Connectorized Package Outline Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized InGaAs PIN-TIA Photodiode Receivers VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Connectorized InGaAs/InP PIN Photodiode Receivers Pigtail (dimensions in mm): Connector Options: None FC/PC SC/PC ST/PC FC/APC SC/APC ST/APC Connectorized InGaAs PIN-TIA Photodiode Receivers Receptacle (dimensions in mm): Connectorized InGaAs PIN-TIA Photodiode Receivers If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized InGaAs PIN Photodiode Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Connectorized InGaAs PIN-TIA Photodiode Receivers Read Model No. R13 = Receiver 155 = Data Rate W = Package X = Connector Y = Fiber Z = Sensitivity R13-155-WXYZ InGaAs/InP PIN-TIA photodiode for 1310 nm & 1550 nm 155 Mbps Receptacle (W= R); Pigtail (W = P) For Pigtail: None (X= NO); FC/PC (X=FC); SC/PC (X=SC); ST/PC (X=ST); FC/APC (X=FA); SC/APC (X=CA); ST/APC (X=TA) For Receptacle: FC (X=FC); SC (X=SC); ST (X=ST) 9/125 m SM fiber(Y=1) 50/125 m MM fiber(Y=2) 62.5/125 m MM fiber(Y=3) <-34 dBm (Z=1); <-36 dBm (Z=2) Features InGaAs/InP-PIN photodiode with transimpedance amplifier High V/mW gain Single +5V operation Hermetically sealed 4-pin metal case -40~+85 oC operating range Data Rate: 155Mbps, NRZ Packaging FC/ST/SC receptacle package SM fiber pigtailed with optional FC/ST/SC connector Applications ATM/SONET/Fast Ethernet 125/155 Mbps receiver Absolute Maximum Ratings(Tc=25oC) Parameter Symbol Value Unit Supply Supply Voltage VCC 6 V Operating Temperature Top -40~+85 oC Storage Temperature Tstg -40~+85 oC Connectorized InGaAs PIN Photodiode Modules DC/Electrical Characteristics (CW @Tc=25oC) Parameter Symbol Min. Typ. Max. Power Supply VCC 4.5 5.0 5.5 Output Offset Voltage Vos 2.1 Supply Current Icc 30 Unit V V - mA AC/Optical & Electrical Characteristics (CW @Tc=25oC) Parameter Symbol Detection Range Gain Min. Typ. Max. Unit Condition 1100 - 1650 nm 100 V/mW =1300nm G 0.08 Bandwidth BW 120 150 - MHz =1300nm Sensitivity S - -37 -36/-34 dBm BER = 10-9 Dynamic Range DR - 37 - dB Saturation Power Psat - 0 - dBm Output Resistance Rout - 50 - =1300nm Please click below for more information. Pinout & Outline Dimensions If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized 155Mbps InGaAs/InP PIN-TIA photodiode 155Mbps InGaAs/InP PIN-TIA Receiver Module Receptacle (dimensions in mm) Connectorized 155Mbps InGaAs/InP PIN-TIA photodiode Pigtailed (dimensions in mm) Connectorized 155Mbps InGaAs/InP PIN-TIA photodiode Note: Pins orientation can be customer specified. GaAs PIN Arrays VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | 1 x N (N= 2, ..., 40) GaAs PIN Arrays with 100m & 70m Sensitive Area We offer 1 x N (N= 1, ..., 40) GaAs PIN photodiode chip & arrays as well as 850 nm VCSEL chip & arrays now. We provide two versions of GaAs PIN phodiode PIN arrays. One is with 100m sensitive area, which is with bandwidth >1.5GHz. The other is with 70m sensitive area, which is with rise/fall time is < 100 psec and can be applied for higher speed applications. The specifications of 1xN (N=2, ..., 40) arrays are same except the size. The following specifications are for 1 x 4 GaAs PIN arrays as examples. Please contact us for more information if needed. 1 x N (N= 2, ..., 40) GaAs PIN photodiode arrays with 100m sensitive area- PDA-85-1X4 1 x N (N= 2, ..., 40) GaAs PIN photodiode arrays with 70m sensitive area- PDA-85-1X4-V2 Model No.: PDA-85-1X4 Features: GaAs PIN photodiode array 1 x 4 array bar with 250 m pitch Sensitive area 100 m Bandwidth >1.5GHz Optimized for fiber optic applications ELECTRO-OPTICAL CHARACTERISTICS: (for each single PIN photodiode element) PARAMETERS SYMBOL MIN TYP MAX UNIT TEST CONDITIONS R 0.55 0.6 0.65 A/W VR =5V, =850nm Responsivity(1) Responsivity Uniformity(2) R Forward Current IF Dark Current ID Breakdown Voltage VBD Capacitance C Bandwidth BW 3 % 100 1.0 50 85 0.9 1.5 9.0 1.2 A VF = 1V nA VR =5V V IR =10A pF VR =5V f=1 MHz GHz Notes: 1. AR coating optimized for the specific 850nm wavelength. 2. The difference of the maximum and minimum responsivity of each photodiode of an array shall not be >3%. ABSOLUTE MAXIMUM RATING: VR =5V GaAs PIN Arrays PARAMETERS Reverse voltage SYMBOL VR Forward Voltage Forward Current MIN MAX UNIT 20 V VF 1.5 V IF 5 mA Operating Humidity 85 % R.H. Operating Humidity 85 % R.H. 97 % R.H. Storage Humidity VF = 1.5V Storage Temperature Tstg -20 120 oC Operating Temperature Top -20 85 oC 260 oC Lead Solder Temperature TEST CONDITIONS 10 seconds DIMENSIONS: PARAMETERS Number of PIN photodiode elements SYMBOL N MIN TYP 4 MIN UNIT m Pitch P 250 Chip length (1 x N) L 990 1000 1110 m Chip width w 240 250 260 m Chip thickness t 190 200 210 m Diameter bond pads (see below) 70 m Diameter sensitive area (see below) 100 m OUTLINE DIAGRAM: (unit in m) GaAs PIN Arrays Model No.: PDA-85-1X4-V2 Features: GaAs PIN photodiode array 1 x 4 array bar with 250 m pitch Sensitive area 70 m Rise/Fall time (10-90%) <100 ps at 50 Optimized for fiber optic applications ELECTRO-OPTICAL CHARACTERISTICS: (for each single PIN photodiode element) PARAMETERS SYMBOL MIN TYP MAX UNIT TEST CONDITIONS A/W VR =5V, =850nm Responsivity(1) R Surface Reflectivity RS 1 % % Dark Current R ID 3 Breakdown Voltage VBD Responsivity Uniformity(2) Capacitance C Optical Power Range Rise/Fall Time (10-90%) 0.55 0.6 1.0 50 9.0 70 0.4 0.6 P 0 TR/TF 80 0.8 nA VR =5V V IR =10A pF VR =1.6V f=1 MHz dBm 100 At 50 ps Notes: 1. AR coating optimized for the specific 850nm wavelength. 2. The difference of the maximum and minimum responsivity of each photodiode of an array shall not be >3%. ABSOLUTE MAXIMUM RATING: PARAMETERS Reverse voltage SYMBOL VR Forward Voltage Forward Current MIN MAX UNIT 20 V VF 1.5 V IF 5 mA Operating Humidity 85 % R.H. Operating Humidity 85 % R.H. Storage Humidity 97 % R.H. Storage Temperature Tstg -20 120 oC Operating Temperature Top -20 85 oC 260 oC Lead Solder Temperature TEST CONDITIONS VF = 1.5V 10 seconds DIMENSIONS: PARAMETERS Number of PIN photodiode elements SYMBOL N MIN TYP 4 MIN UNIT GaAs PIN Arrays Pitch P 250 m Chip length (1xN) L 1000 m Chip width w 250 m Chip thickness t 185 200 215 m Diameter bond pads (see below) 80 m Diameter sensitive area (see below) 70 m OUTLINE DIAGRAM: (unit in m) Dicing Saw If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm VCSEL Arrays VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCSEL Chips We supply not only ion-implant VCSEL but also oxidation VCSEL with high performance and high speed for data communications as well as sensing applications. In addition, ion-implant VCSELs designed for CWDM (coarse wavelength division multiplexing) data communications with custom-matched wavelength spacing from 770nm to 870nm are also available. For more information regarding VCSEL used in CWDM or other applications, please contact Paul Lin at tel: (909)718-0999 or e-mail: paul@lasermate.com. Please click the Model No. below for more detail information. Model No. Wavelength (nm) Process Method Feature VCC85A1G 850 Ion-implant 1.25Gbps datacom VCC85A1G-H 850 Ion-implant high power, 1.25Gbps datacom gaussian beam <1.5mW, position VCC85A1G-S 850 Ion-implant sensing VCC77A1G 770 Ion-implant CWDM VCC79A1G 790 Ion-implant CWDM VCC81A1G 810 Ion-implant CWDM VCC82A1G VCC85A2G 820 850 VCC85A3G-O 850 Ion-implant Ion-implant CWDM 1.25Gbps datacom Oxidation 2.5Gbps, 3.125GBd datacom If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm VCSEL Arrays 850 nm VCSEL Arrays VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCC-85A1G High performance ion-implant VCSEL chip for data communication FEATURES: High performance VCSEL chip designed for communication application Low threshold current 5 mA typical Optical window diameter 18 m Bandwidth > 1 GHz ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL Threshold Current Ith Output Power Operating Current Slope Efficiency Po IOP dP/dI Wavelength P Spectral Width (FWHM) Threshold Voltage Vth Forward Voltage VF Dynamic Resistance W TYP 2 830 Top UNIT 7 mA 2 15 5 30 mW mA mW/mA IF=11 mA nm IF=11 mA nm IF=11 mA V IF=0.5 mA V IF=11 mA IF=11mA GHz IF=11 mA 860 0.5 1.47 1.49 1.7 2.1 2.5 30 1 18 0 25 1 1.55 20 TEST CONDITIONS (1)(2) 5 845 Beam Divergence MAX 0.25 dV/dI Bandwidth Operating temperature MIN 50 degree 85 oC Note: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IF=11 mA, 25C, CW. 3. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). Full width at 1/e2 (3) 850 nm VCSEL Arrays Outline Dimensions: 250 m x 305 m x 100 m If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm VCSEL Array & chip with higher output power for free space data communication applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCC-85A1G-H High performance ion-implant VCSEL chip with higher output power for data communication FEATURES: High performance VCSEL chip designed for communication application Low threshold current 7 mA typical High output power 10mW @ 27 mA typical Optical window diameter 18 m Bandwidth > 1 GHz ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL Threshold Current Ith Output Power Operating Current Slope Efficiency Po IOP dP/dI Wavelength P Spectral Width (FWHM) Threshold Voltage Vth Forward Voltage VF Dynamic Resistance W TYP 4 830 UNIT mA 10 27 20 40 mW mA mW/mA IF=11 mA nm IF=11 mA nm IF=11 mA V IF=0.5 mA V IF=11 mA IF=11mA GHz IF=11 mA 860 0.5 1.47 1.49 1.7 2.0 2.5 40 1 18 0 25 1 1.55 20 TEST CONDITIONS (1)(2) 12 845 Top MAX 7 0.3 dV/dI Bandwidth Beam Divergence Operating temperature MIN 60 degree 85 oC Note: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IF=11 mA, 25C, CW. 3. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). Full width at 1/e2 (3) 850 nm VCSEL Array & chip with higher output power for free space data communication applications Outline Dimensions: 250 m x 305 m x 100 m If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm VCSEL chip & array for sensing applications VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCC-85A1G-S High performance ion-implant VCSEL chip for data communication & sensing applications FEATURES: High performance VCSEL chip designed for data communication & sensing applications Low threshold current 5 mA typical Optical window diameter 18 m Bandwidth > 1 GHz Gaussian beam distribution & no mode hoping @ <1.5mW ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL Threshold Current Ith Output Power Operating Current Slope Efficiency Po IOP dP/dI Wavelength P Spectral Width (FWHM) Threshold Voltage Vth Forward Voltage VF Dynamic Resistance W MAX UNIT 5 6 1 15 1.5 20 0.20 830 845 860 0.5 1.47 1.49 1.7 1 1.55 2.0 20 2.5 30 50 1 Top TYP 2 dV/dI Bandwidth Beam Divergence Operating temperature MIN 8 0 10 25 12 85 TEST CONDITIONS (1)(2) mA mW mA mW/mA IF=11 mA nm IF=11 mA nm IF=11 mA V IF=0.5 mA V IF=11 mA IF=11mA GHz IF=11 mA degree oC Note: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IF=11 mA, 25C, CW. 3. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). Full width at 1/e2 (3) 850 nm VCSEL chip & array for sensing applications Outline Dimensions: 250 m x 305 m x 100 m If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm VCSEL Arrays VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCC-85A2G High performance VCSEL chip for data communication FEATURES: High performance VCSEL chip designed for communication application Low dependence of electrical and optical characteristics from -10 to 70 oC Low threshold current 3 mA typical Optical window diameter 15 m Bandwidth > 2 GHz Highly reliable with MTTF > 108 hrs @ 25 oC, 12 mA ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL MIN TYP MAX Ith Output Power Po Operating Current IOP Slope Efficiency Wavelength P 830 845 860 nm IF=12 mA Forward Voltage VF 1.7 1.9 2.3 V IF=12 mA V IR=10 A IF=12 mA GHz IF=12 mA VBD Series Resistance RS Bandwidth W Beam Divergence 1 10 2 6 TEST CONDITIONS (1)(2) Threshold Current Breakdown voltage 3 UNIT mW IF=12 mA (3) 12 mA 0.25 mW/mA Adjustable to establish 1.5 mW output power IF=12 mA (4) 15 40 2 8 3 mA degree Note: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IF=12 mA, 25C, CW. 3. Higher power can be provided under request. 4. Slope efficiency is defined as P/(12-Ith) at 25C. 5. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). Outline Dimensions: IF=12 mA (5) 850 nm VCSEL Arrays Typical Size: 300 m x 300 m x 200 m If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm oxidation VCSEL chip & array VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | VCC-85A3G-O High performance oxidation VCSEL chip for data communication FEATURES: High performance VCSEL chip designed for communication application Low threshold current 1 mA typical Optical window diameter 14 m and oxidation aperture diameter 10 m Capable to run the speed of 2.5Gbps, 3.125GBd or higher in datacom applications. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL MIN TYP Threshold Current Ith 0.5 Output Power Operating Current Slope Efficiency Po IOP dP/dI 1 6 Wavelength P Spectral Width (FWHM) Threshold Voltage Vth Forward Voltage VF Reverse Breakdown Voltage Vb Dynamic Resistance W Beam Divergence Operating temperature Top UNIT 1 3 2 8 4.5 12 0.38 830 845 860 0.5 1.5 1.6 1.7 5 1 1.8 2.1 10 dV/dI Bandwidth MAX 2.5 15 40 55 65 2.4 10 0 16 25 20 85 TEST CONDITIONS (1)(2) mA mW mA mW/mA IF=4 mA nm IF=4 mA nm IF=4 mA V IF=0.3 mA V IF=4 mA V IF=4 mA IF=4 mA GHz IF=4 mA degree oC Note: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IF=4 mA, 25C, CW operation. 3. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). Full width at 1/e2 (3) 850 nm oxidation VCSEL chip & array Outline Dimensions: 250 m x 305 m x 100 m The brighter area is metal. The thickness of chip is 100 m. Note: These specifications are subject to change without notice. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850 nm oxidation VCSEL chip & array 850 nm VCSEL Arrays VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories | Laser Products | Electroluminescent Products | 1 D VCSEL Arrays For 1D VCSEL array, we offer two kinds of 1D array. One is with 1 x N (N= 2, ...40) 850nm VCSEL array with bandwidth >2GHz. The other is with 1 x N (N= 2, ...) 850nm VCSEL chip array with bandwidth >1GHz. The specifications of 1xN (N=2, ...) arrays are same except the length of size. The following is the specification of 1 x 4 VCSEL array as an example. Please contact us for more information if needed. Model No.: VCA-1X4 Features: 850 nm VCSEL array 1 x 4 array bar with 250 m pitch Bandwidth > 2 GHz Optimized for fiber optic applications Picture of single chip (Note: you can link 4 or 8 pcs from left to right to become 1x 4 or 1x8 VCSEL array, respectively.) ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL Threshold Current Ith Output Power Slope Efficiency Po MIN TYP MAX 3 0.5 0.1 1.5 0.2 UNIT 5 TEST CONDITIONS (1) (2) mA mW mW/mA IF =10 mA IF =10 mA (3) 850 nm VCSEL Arrays Wavelength Forward Voltage Breakdown Voltage Serial Impedance Beam Divergence Bandwidth P VF VBD 830 850 1.7 10 860 1.9 nm V V 2.2 15 RS 30 BW IF=10 mA IF=10 mA degree GHz 40 8 2 IR=10A IF =10 mA IF=10 mA (4) Notes: 1. Parameters are measured with chip die-bonded to a metal header. 2. All parameters except mentioned are measured at IFF=10 mA, 25oC, CW. 3. Slope efficiency is defined as P/(12-IF) at 25oC. 4. Beam divergence is defined as the angle of light intensity at Full Width at Half Maximum (FWHM). ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX UNIT Storage Temperature -40 125 C Operating Temperature -20 85 CONDITIONS C Lead Solder Temperature Continuous Forward Current 260 40 C mA Continuous Reverse Voltage 10 V 10 seconds THERMAL CHARACTERISTICS: PARAMETERS SYMBOL MIN Thermal Resistance Rth Ith Temperature Variation Ith -1.5 VF Temperature Coefficient VF/T -3.5 Temperature Coefficient /T P Temperature Coefficient P /T TYP MAX UNIT 900 -2.5 C /W TEST CONDITIONS TA=25C 1.5 mA -1.5 mV/C TA =0~70C, IF = 10mA %/C TA =0~70C, IF = 10mA nm/C TA =0~70C, IF = 10mA -0.40 -0.70 0.06 TA =0~70C DIMENSIONS: PARAMETERS Number of PIN photodiode elements SYMBOL MIN N Pitch P Chip length (1xN) L Chip width w Chip thickness t Outline Diagram: (unit: m) MIN UNIT 4 m 250 1000 1110 m 240 250 260 m 190 200 210 m 990 Square bond pads Window size TYP m 100 17.5 18 18.5 m 850 nm VCSEL Arrays If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 850nm VCSEL 2D Array VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | 850nm VCSEL 2D Array Model No. VCA-NxN (N = 2, 3, ....) Features: 850 nm VCSEL 2D array N x N (N= 2, 3, ...) array with single element size 250 m x 435 m Bandwidth 1 GHz Optimized for fiber optic applications Optical and Electrical Characteristics Parameter Peak Wavelength Spectral Width (FWHM) Symbol Min. TYP. Max. Unit Test Condition 830 845 860 (nm) If = 11mA @ RT p --- 0.5 1 (nm) If = 11mA @ RT Beam Divergence Threshold Voltage Vth 10 18 25 (Deg) Full width at 1/e2 1.47 1.49 1.55 (V) If = 0.5mA @ RT Forward Voltage Vf 1.7 2.0 2.5 Threshold Current Ith 2 5 7 Peak Optical Power Pmax 3 6 12 (mW) Peak Power Current Ipmax 20 30 40 Slop Efficiency dP/dI 0.2 0.3 Dynamic Resistance dV/dI 20 40 0.5 (W/A) If = 11mA @ RT 60 () If = 11mA @ RT Reverse Breakdown Voltage Vb 5 10 15 (V) Operation Temperature Range Top 0 25 70 oC Maximum Ratings Parameter Min. Max. Unit Storage Temperature -30 100 oC Operating Temperature Continuous Forward Current -30 80 30 oC mA 5 (V) Continuous Reverse Voltage (V) If = 11mA @ RT (mA) (mA) 850nm VCSEL 2D Array The dimensions of 16x16 VCSEL array is an example for the outline dimensions of our VCSEL NxN array. If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized 1310nm FP Laser Diode Modules in SC, ST & FC connectors VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Connectorized 1310nm FP Laser Diode Modules Read Model No. T13F = Laser X = Package Y = Connector T13F-XYZ-WM 1310 nm FP laser Pigtailed with 9/125 m SM fiber (X=P), Receptacle (X=R) For Pigtail: None (Y=NO); FC/PC (Y=FC); SC/PC (Y=SC); ST/PC (Y=ST); FC/APC (Y=FA); SC/APC (Y=CA); ST/APC (Y=TA) For Receptacle: FC(Y=FC); SC(Y=SC); ST (Y=ST); >0.4mW(Z=L); >0.6mW(Z=M); >1mW (Z=H); >1.5mW(Z=E) A pinout configuration (W=A); B pinout configuration (W=B) No flange (M=0); standard mount (M=1); optional mount (M=2) Z = Output power W = Pinout configuration M = Mount Pigtailed laser diode module package Receptacle laser diode module package Features Laser diode with multi-quantum-well structure Uncooled operation at -40~+85oC Built-in InGaAs monitor photodiode Hermetically sealed active component Packaging FC/ST/SC receptacle package with 2-hole flange Uncooled fiber pigtailed with optional FC/ST/SC connector Applications Connectorized 1310nm FP Laser Diode Modules in SC, ST & FC connectors Design for fiber optic networks SONET OC-3/OC-12/OC-24 SDH STM-1/STM-4/STM-8 Stable light source Insertion / Return loss meter Absolute Maximum Ratings(Tc=25oC) Parameter Symbol Value Unit LD Forward Current IFLD 100 mA LD Reverse Voltage VRLD 2 V PD Reverse Current IRPD 2 mA PD Reverse Voltage VRPD 15 V Operating Case Temperature Top -40~+85 oC Storage Temperature Tstg -40~+100 oC Soldering Temperature Tstg 260 oC T 10 sec Soldering Time Optical and Electrical Characteristics(Tc=25oC) Parameter Symbol Min. Typ. Max. Unit Threshold Current Ith - 8 15 mA Fiber Output Power Pf 0.4 - - - L 0.6 M 1.0 H 1.5 Test condition CW Coupled 9/125 m SM fiber, CW, Ith+20mA E Peak Wavelength 1280 1310 1340 nm CW, Pf Spectrum Width - 2 5 nm CW, Pf Forward Voltage VF - 1.2 1.6 V CW, Pf Rise/Fall Time tr / tf - 0.3 0.5 ns Ibias=Ith , 20~80% Tracking Error Pf/Pf - 1.0 - dB APC, -40~+85oC PD Monitor Current Im 0.2 - - mA CW, Pf, VRPD=5V PD Monitor Dark Current Id - 40 100 nA VRPD=5V PD Monitor Capacitance C - 10 20 pF VRPD=5V, 1MHz Please click the below for more information. Dimensions & Pinout Connectorized 1310nm FP Laser Diode Modules in SC, ST & FC connectors If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized 1310nm & 1550 nm FP Laser Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Dimensions & Pinout of Connectorized 1310nm & 1550 nm FP Laser Diode Modules Pigtailed (Unit: mm) Connectorized 1310nm & 1550 nm FP Laser Modules Connector Options: None FC/PC SC/PC ST/PC FC/APC SC/APC ST/APC Receptacle (unit: mm) Connectorized 1310nm & 1550 nm FP Laser Modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized 1310nm & 1550 nm FP Laser Modules VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Dimensions & Pinout of Connectorized 1310nm & 1550 nm FP Laser Diode Modules Pigtailed (Unit: mm) Connector Options: None FC/PC SC/PC ST/PC FC/APC SC/APC ST/APC Connectorized 1310nm & 1550 nm FP Laser Modules Standard Mount Optional Mount Receptacle (unit: mm) Connectorized 1310nm & 1550 nm FP Laser Modules Connectorized 1310nm & 1550 nm FP Laser Modules If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Connectorized 1550nm FP Laser Diode Module VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Connectorized 1550nm FP Laser Diode Modules Read Model No. T15F = Laser X = Package Y = Connector Z = Output power W = Pinout configuration M = Mount T15F-XYZ-WM 1550 nm FP laser Pigtailed with 9/125 m SM fiber (X=P), Receptacle (X=R) For Pigtail: None (Y=NO); FC/PC (Y=FC); SC/PC (Y=SC); ST/PC (Y=ST); FC/APC (Y=FA); SC/APC (Y=CA); ST/APC (Y=TA) For Receptacle: FC (Y=FC); SC (Y=SC); ST (Y=ST) >0.4mW (Z=L), >0.6mW (Z=M), >0.8mW (Z=H) A pinout configuration (W=A); B pinout configuration (W=B) No flange (M=0); standard mount (M=1); optional mount (M=2) Pigtailed laser diode module package Receptacle laser diode module package Features Laser diode with multi-quantum-well structure Uncooled operation at -40~+70oC Built-in InGaAs monitor photodiode Hermetically sealed active component Packaging FC/ST/SC receptacle package with 2-hole flange Uncooled fiber pigtailed with optional FC/ST/SC connector Applications Design for fiber optic networks SONET OC-3/OC-12 SDH STM-1/STM-4 Stable light source Connectorized 1550nm FP Laser Diode Module Insertion / Return loss meter Absolute Maximum Ratings(Tc=25oC) Parameter Symbol Value Unit LD Forward Current IFLD 100 mA LD Reverse Voltage VRLD 2 V PD Reverse Current IRPD 2 mA PD Reverse Voltage VRPD 15 V Operating Case Temperature Top -40~+70 oC Storage Temperature Tstg -40~+85 oC Soldering Temperature Tstg 260 oC T 10 sec Soldering Time Optical and Electrical Characteristics (Tc=25oC) Parameter Symbol Min. Typ. Max. Unit Threshold Current Ith - 20 30 mA Fiber Output Power L Pf - - - M 0.4 H 0.6 Test condition CW CW, Ith+20mA 0.8 Peak Wavelength 1520 1550 1580 nm CW, Pf Spectrum Width - 2 5 nm CW, Pf Forward Voltage VF - 1.0 1.6 V CW, Pf Rise/Fall Time tr / tf - 0.5 1.0 ns Ibias=Ith ,20~80% Tracking Error Pf / Pf - 1.0 - dB APC, -20~+70oC Im 0.1 0.8 - mA CW, Pf, VRPD=5V PD Monitor Current Please click the below for more information. Dimensions Outline & Pinout If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | 1310nm DFB LASER DIODE MODULE VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | Pigtailed 1310nm DFB Laser Diode Modules Read Model No. T13D = Laser X = Package Y = Connector Z = Output power W = Pinout configuration M = Mount T13D-XYZ-WM 1310 nm DFB laser Pigtailed with 9/125 m SM fiber (X=P) For Pigtail: None (Y=NO); FC/PC (Y=FC); SC/PC (Y=SC); ST/PC (Y=ST); FC/APC (Y=FA); SC/APC (Y=CA); ST/APC (Y=TA) >1mW(Z=1); >2mW(Z=2) A pinout configuration (W=A) B pinout configuration (W=B) No flange (M=0); standard mount (M=1); optional mount (M=2) FEATURES 1310 nm InGaAsP/InP MQW-DFB laser diode (LD) Entirely fabricated by OMVPE Low threshold current Uncooled Hermetically sealed High performance over wide temperature range Power monitoring (InGaAs high speed pin PD) Available in pigtailed modules with FC/ST/SC APC Connectors APPLICATIONS SONET OC-3/OC-12/OC-24 SDH STM-1/STM-4/STM-8 Stable light source Insertion / Return loss meter CATV SPECIFICATIONS Electrical and Optical Characteristics (CW @ T=25oC) Parameter Threshold current Symbol Ith Fiber output power Pf Central wavelength c Side-mode suppression ratio SMSR Min. Typ. Max. 8 15 1 2 - 1290 1310 1330 30 35 - Unit mA Condition CW mW If = Ith +20mA nm CW, Pf dB CW, Pf 1310nm DFB LASER DIODE MODULE Operating voltage Vop Rise time / Fall time tr / tf - 0.2 Tracking error Pf / Pf - 1.0 - Monitor current Im 0.1 0.3 Monitor dark current Id - Monitor capacitance C - Return loss RL - 1.2 1.6 V CW, Pf - nsec Ib=Ith 20~80% dB APC, -40oC~+85oC - mA CW, Pf, Vrp =5V - 10 nA Vrp = 5V - 10 pF Vrp = 5V, 1MHZ dB CW, Pf 30 Absolute maximum ratings Parameter Storage temperature Operating case temperature Symbol Tstg Value -40~+100 Unit oC Top -40~+85 oC Peak optical output power Po 5 mW Forward current (LD) IfL 100 mA Reverse voltage (LD) VrL 2 V Reverse current (PD) Irp 2 mA Reverse voltage (PD) VrP 15 V Soldering temperature Stemp 260 oC Soldering time Stime 10 sec Pinout: Pigtailed (dimensions in mm): Standard Mount 1310nm DFB LASER DIODE MODULE Optional Mount If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST | Pigtailed 1550nm DFB LASER DIODE MODULE VCSELs | Communication Lasers | Photodiode Receivers | Fiber Optical Transceivers | Book Store | On Sale Items | Green, Red, & Infrared Laser Diode Modules | Laser Diodes | Laser Accessories| Laser Products | Electroluminescent Products | PIGTAILED 1550 nm DFB LASER DIODE MODULES Read Model No. T15D = Laser X = Package Y = Connector Z = Output power W = Pinout configuration M = Mount T15D-XYZ-WM 1550 nm DFB laser Pigtailed with 9/125 m SM fiber (X=P) None (Y=NO) FC-PC (Y=FC); SC-PC (Y=SC); ST-PC (Y=ST); FC-APC (Y=FA); SC-APC (Y=CA); ST-APC (Y=TA) >1mW(Z=1); >1.5mW(Z=2) A pinout configuration (W=A) B pinout configuration (W=B) No flange (M=0); standard mount (M=1); optional mount (M=2) FEATURES 1550 nm InGaAsP/InP MQW-DFB laser diode (LD) Entirely fabricated by OMVPE Low threshold current Uncooled Hermetically sealed High performance over wide temperature range Power monitoring (InGaAs high speed pin PD) Available in pigtailed modules with FC/ST/SC APC Connector APPLICATIONS SONET OC-3/OC-12/OC-24 SDH STM-1/STM-4/STM-8 Stable light source Insertion / Return loss meter CATV SPECIFICATIONS Electrical and Optical Characteristics (CW @ T=25oC) Parameter Threshold current Symbol Ith Fiber output power Pf Central wavelength c Side-mode suppression ratio Min. Typ. Max. 10 20 1 Unit mA Condition CW mW If = Ith +20mA nm CW, Pf - dB CW, Pf 1.3 1.8 V CW, Pf 0.1 1.5 - 1530 1550 1570 SMSR 30 Operating voltage Vop - Rise time / Fall time tr / tf - Tracking error Pf / Pf - Monitor current Im 0.1 35 0.2 nsec 1.0 - dB Ib=Ith 20~80% APC, -20oC~+85oC 0.5 - mA CW, Pf, Vrp =5V Pigtailed 1550nm DFB LASER DIODE MODULE Monitor dark current Id - - 10 nA Vrp = 5V Monitor capacitance C - - 10 pF Vrp = 5V, 1MHZ dB CW, Pf Return loss RL 30 Absolute maximum ratings Parameter Storage temperature Symbol Tstg Value -40~+100 Unit Operating case temperature Top -40~+85 oC Peak optical output power Po 5 mW Forward current (LD) IfL 100 mA Reverse voltage (LD) VrL 2 V Reverse current (PD) Irp 2 mA Reverse voltage (PD) VrP 15 V oC Soldering temperature Stemp 260 oC Soldering time Stime 10 sec Pinout: Pigtailed (dimensions in mm): Standard Mount Pigtailed 1550nm DFB LASER DIODE MODULE Optional Mount If you have any comments or request for detail product information, please fill the Quotation & Information Request Form or mail to: info@lasermate.com. HOME | PRODUCT LIST | ORDER FORM | QUO & INFO REQUEST |