UNISONIC TECHNOLOGIES CO., LTD 2SD880 NPN SILICON TRANSISTOR NPN EPITAXIAL TRANSISTOR DESCRIPTION The UTC 2SD880 is designed for audio frequency power amplifier applications. FEATURES * High DC Current Gain: hFE=200(Max.)(VCE=5V, IC=0.5A) * Low Saturation Voltage: VCE(SAT)=1.0V(Max.)(IC=3A, IB=0.3A) * High Power Dissipation: PC=30W (TC=25C) * Complementary to 2SB834 ORDERING INFORMATION Ordering Number Lead Free Halogen Free 2SD880L-TA3-T 2SD880G-TA3-T Package TO-220 www.unisonic.com.tw Copyright (c) 2012 Unisonic Technologies Co., Ltd 1 B Pin Assignment 2 3 C E Packing Tube 1 of 4 QW-R203-013.E 2SD880 NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS PARAMETER Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Base Current Power Dissipation (Derate at TC >25C) RATINGS UNIT 60 V 60 V 7 V 3 A 0.5 A 30 W TA=25 1.5 TJ Junction Temperature W TC=25 30 Storage Temperature TSTG -55~+150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCBO VCEO VEBO IC IB PD ELECTRICAL CHARACTERISTICS (TA =25C) PARAMETER Collector-Emitter Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage DC Current Gain Current gain bandwidth product SYMBOL BVCEO ICBO IEBO VCE(SAT) VBE(ON) hFE fT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IC=50mA, IE=0 VCB=60V, IE=0 VEB=7V, IC=0 IC=3A, IB=300mA VCE=5V, IC=500mA IC=500mA, VCE=5V VCE=5V, IC=500mA MIN 60 TYP MAX 100 100 1 1 200 100 3 UNIT V A A V V MHZ 2 of 4 QW-R203-013.E Collector Current, IC (A) Collector Current, IC (A) DC Current Gain,hFE Collector Current, IC (A) Power Dissipation, PD (W) Voltage, V (V) 2SD880 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS QW-R203-013.E 3 of 4 2SD880 NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R203-013.E