SHL CONNECTOR Emboss Emboss Tape Tape 1.0 mm pitch/Disconnectable Crimp style connectors Specifications SHL CONNECTOR * Current rating: 1.0 A AC/DC (AWG #28) * Voltage rating: 50 V AC/DC * Temperature range:-25 to +85 (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20 m max. After environmental tests/ 40 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire:AWG #32 to #28 *In using the products,refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page). *RoHS2 compliance *Dimensional unit: mm * Contact JST for details. SHL Thin design Low insertion force Deformation preventive design Standards (R) (R) (R) Recognized E60389 (R) PC board layout and Assembly layout (R) Normal type 0.6 1 1.8 PC board Header outline 1.2 4.3 1.4 3.85 5.1 1.7 4.50.1 4.6 4.3 0.7 0.9 1 Header outline (7.2) 0.7 1.7 3.35 (7.2) 1 0.7 0.6 Offset type (1.55) 1.6 0.9 Note:1 . The above figure is the figure viewed from the connector mounting side. 2. T olerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Model No. SSHL-003T-P0.2 0.0320.08 3228 0.40.8 Q'ty/ reel 41,000 Material and Finish 4.75 2 0.5 Applicable wire Insulation O.D. (mm) AWG # mm2 Phosphor bronze, tin-plated (reflow treatment) 0.8 0.8 2.35 0.4 RoHS2 compliance Note: Contact JST for gold-plated products. Contact SSHL-003T-P0.2 Crimping machine Crimp applicator AP-K2N MKS-L-10-3 Applicator Dies Crimp applicator with dies MK/SSH/L-003-02 APLMK SSH/L003-02 Note: Contact JST for fully automatic crimping applicator. 1 -2 SHL CONNECTOR Housing No. of circuits 2 5 Marking by every 5 circuit 6 Circuit No.1 mark 7 1.75 8 10 2.9 11 12 5.7 14 16 20 22 1 26 1.15 30 A Dimensions (mm) A B Model No. With protrusions SHLP-02V-S-B SHLP-05V-S-B SHLP-06V-S-B SHLP-07V-S-B SHLP-08V-S-B SHLP-10V-S-B SHLP-11V-S-B SHLP-12V-S-B SHLP-14V-S-B SHLP-16V-S-B SHLP-20V-S-B SHLP-22V-S-B SHLP-26V-S-B SHLP-30V-S-B Q'ty/box 1.0 4.6 6,000 4.0 7.6 3,000 5.0 8.6 3,000 6.0 9.6 3,000 7.0 10.6 3,000 9.0 12.6 2,000 10.0 13.6 2,000 11.0 14.6 2,000 13.0 16.6 2,000 15.0 18.6 1,000 19.0 22.6 1,000 21.0 24.6 1,000 25.0 28.6 1,000 29.0 32.6 1,000 SHL CONNECTOR Material and Finish B PBT, UL94V-0, natural (white) RoHS2 compliance Shrouded header Normal type No. of circuits Model No. Normal type Offset type Insulation O.D. (mm) Q'ty/ Normal type Offset type reel A B A B 2 SM02B-SHLS-TF - 1.0 4.8 - - 4,500 5 SM05B-SHLS-TF - 4.0 7.8 - - 4,500 6 SM06B-SHLS-TF - 5.0 8.8 - - 4,500 7 SM07B-SHLS-TF - 6.0 9.8 - - 4,500 8 SM08B-SHLS-TF SM08B-SHLS-1-TF 7.0 10.8 7.0 12.0 4,500 10 SM10B-SHLS-TF - 9.0 12.8 - - 4,500 11 SM11B-SHLS-TF - 10.0 13.8 - - 4,500 12 SM12B-SHLS-TF - 11.0 14.8 - - 4,500 14 SM14B-SHLS-TF SM14B-SHLS-1-TF 13.0 16.8 13.0 18.0 4,500 16 SM16B-SHLS-TF - 15.0 18.8 - - 4,500 20 SM20B-SHLS-TF SM20B-SHLS-1-TF 19.0 22.8 19.0 24.0 4,500 22 SM22B-SHLS-TF - 21.0 24.8 - - 4,500 B 26 SM26B-SHLS-TF - 25.0 28.8 - - 4,500 A 30 SM30B-SHLS-TF - 29.0 32.8 - - 4,500 B A 4.3 0.7 1.75 1 Circuit No.1 Offset type 1.4 Circuit No.1 1.75 4.3 1.2 Material and Finish 1.4 1 Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS2 compliance This product displays (LF)(SN) on a label. Note: Contact JST for the headers with gold-plated pins. 2