DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
DO NOT
SCALE FROM
THIS PRINT
QSFPK-PF-XX
OPTION
-01: WITHOUT HEAT SINK
(USE QSFPC-PF-01 &
QSFP8-038-01-L-D-RA1
ONE EACH)
-02: WITH HEAT SINK ASSEMBLED
(SEE NOTE 4)
(USE QSFPC-PF-02,
QSFP8-038-01-L-D-RA1,
HS-100-01 & SH58-01 ONE EACH)
-03: WITH HEAT SINK IN A KIT
(USE QSFPC-PF-02,
QSFP8-038-01-L-D-RA1,
HS-100-01, & SH58-01 ONE EACH)
PRESS FIT
QSFPC-PF-01
PACKAGING VIEW FOR CAGE
(SEE NOTE 3)
TUBE: PT-RPB1001
PLUG: TP-04
PACKAGING VIEW FOR CONNECTOR
(SEE NOTE 3)
TUBE: PT-1-24-02-44
PLUG: TP-03
QSFP8-038-01-L-D-RA1
C
FIG 1
(QSFPK-PF-01 SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
QSFP ASM
BY:
QSFPK-PF-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
7/5/2010
3
1
SHEET SCALE: 1.5:1
INSULATOR: LCP
CONTACT: PHOS BRONZE
SHIELD: PHOS BRONZE & SUS 304
HEAT SINK: ALUMINUM-ALLOY
F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 1.11N[0.25 LB].
3. PARTS TO BE PACKAGED IN TUBE.
4. HEAT SINK MUST BE REMOVED PRIOR TO TERMINATION TO PRINTED CIRCUIT BOARD.
5. SEE QSFPC-PF APPLICATION FOR ADDITIONAL TERMINATION INSTRUCTIONS.
REVISION E
QSFP8-038-01-L-D-RA1
QSFPC-PF-02
PACKAGING VIEW FOR CAGE
(SEE NOTE 3)
TUBE: PT-RPB1001
PLUG: TP-04
PACKAGING VIEW FOR CONNECTOR
(SEE NOTE 3)
TUBE: PT-1-24-02-44
PLUG: TP-03
FIG 2
(QSFPK-PF-02 SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
SHEET OF
QSFP ASM
BY:
QSFPK-PF-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
7/5/2010
3
2
SHEET SCALE: 1.5:1
REVISION E
F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
SH58-01
HS-100-01
QSFP8-038-01-L-D-RA1
TUBE: PT-1-24-14-29
PLUG: TP-03
PACKAGING VIEW FOR HEAT SINK
(SEE NOTE 3)
TUBE: PT-1-24-01-34
PLUG: TP-07
PACKAGING VIEW FOR SHIELD
(SEE NOTE 3)
QSFPC-PF-03
PACKAGING VIEW FOR CAGE
(SEE NOTE 3)
TUBE: PT-RPB1001
PLUG: TP-04
PACKAGING VIEW FOR CONNECTOR
(SEE NOTE 3)
TUBE: PT-1-24-02-44
PLUG: TP-03
FIG 3
(QSFPK-PF-03 SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
SHEET OF
QSFP ASM
BY:
QSFPK-PF-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
ROY LUO
7/5/2010
3
3
SHEET SCALE: 1.5:1
REVISION E
F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322