MLG0402Q3N9JT - TDK Corporation - Datasheet.Directory

• All specifications are subject to change without notice.

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

Inductors for High-frequency Circuits

Multilayer/Q-up

MLG series

Type:

Issue date:

MLG0402Q 0402[01005 inch]*

* Dimensions Code JIS[EIA]

August 2012

• All specifications are subject to change without notice.

(1/4)

002-02 / 20120821 / e521_mlg_02

Inductors for High-frequency Circuits

Multilayer/Q-up

MLG Series MLG0402Q

FEATURES

• Inductance values are supported from 0.2 to 33nH.

• Compared to our existing 0603 product, this series has a 30%

smaller cubic ratio and 45% smaller effective area, making it the

optimal product for fine-pitch circuits.

• Guaranteed operating temperature range: –55 to +125°C

• The products contain no lead and also support lead-free

soldering.

• It is a product conforming to RoHS directive.

APPLICATIONS

For high-frequency applications including mobile phones, high

frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB

and tuners.

SHAPES AND DIMENSIONS

RECOMMENDED PC BOARD PATTERN

RECOMMENDED SOLDERING CONDITION

REFLOW SOLDERING

PRODUCT IDENTIFICATION

(1) Series name

(2) Dimensions LW

(3) Type name

(4) Inductance

(5) Tolerance

(6) Packaging style

(7) TDK internal code

SPECIFICATIONS

PACKAGING STYLE AND QUANTITIES

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components.

The preheating temperature should be set so that the

temperature difference between the solder temperature and

product temperature does not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

Conformity to RoHS Directive

0.4±0.02

0.08 to 0.14

0.2±0.02

Weight: 0.07mg

Dimensions in mm

0.18 to 0.20

0.15 to 0.2

0.2

0.15 to 0.2

Natural

cooling

10s max.

Preheating

60 to 120s

Soldering

30 to 60s

230˚C

250 to 260˚C

180˚C

150˚C

Time(s)

MLG 0402 Q 2N2 S T

(1) (2) (3) (4) (5) (6) (7)

0402 0.40.2mm(LW)

2N2 2.2nH

12N 12nH

S ±0.3nH

J±5%

T Taping (reel)

Operating temperature range –55 to +125°C

Storage temperature range –55 to +125°C(After mount)

Packaging style Quantity

Taping 20000 pieces/reel

• Please contact our Sales office when your application is considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

• All specifications are subject to change without notice.

(2/4)

002-02 / 20120821 / e521_mlg_02

ELECTRICAL CHARACTERISTICS

 : Please specify inductance tolerance, (B±0.1nH), (C±0.2nH), (S±0.3nH), (H±3%) or (J±5%).

Please contact us for information on inductance tolerance, G(±2%).

• Test equipment

Inductance Q : HP4291A+16196D, or equivalent

SRF: HP8720C, or equivalent

Rdc: HP4338A, or equivalent

Inductance

(nH)

Inductance

tolerance

min.

Test frequency

L, Q (MHz)

Self-resonant

frequency

(GHz)

DC resistance

()Rated current

(mA)max. Part No.

min. typ. max. typ.

0.2 ±0.1, ±0.2nH — 100 10.0 20.0 0.10 0.03 350 MLG0402Q0N2T

0.3 ±0.1, ±0.2nH — 100 10.0 18.5 0.20 0.07 350 MLG0402Q0N3T

0.4 ±0.1, ±0.2nH — 100 10.0 20.0 0.20 0.08 350 MLG0402Q0N4T

0.5 ±0.1, ±0.2nH — 100 10.0 20.0 0.20 0.11 350 MLG0402Q0N5T

0.6 ±0.1, ±0.2nH — 100 10.0 20.0 0.30 0.13 320 MLG0402Q0N6T

0.7 ±0.1, ±0.2nH — 100 10.0 20.0 0.40 0.19 320 MLG0402Q0N7T

0.8 ±0.1, ±0.2nH — 100 10.0 19.5 0.40 0.11 320 MLG0402Q0N8T

0.9 ±0.1, ±0.2nH — 100 10.0 20.0 0.40 0.15 320 MLG0402Q0N9T

1.0 ±0.1,±0.2, ±0.3nH 2 100 10.0 16.8 0.40 0.20 250 MLG0402Q1N0T

1.1 ±0.1,±0.2, ±0.3nH 2 100 10.0 16.6 0.50 0.22 250 MLG0402Q1N1T

1.2 ±0.1,±0.2, ±0.3nH 2 100 10.0 16.2 0.50 0.25 250 MLG0402Q1N2T

1.3 ±0.1,±0.2, ±0.3nH 2 100 10.0 16.0 0.60 0.28 250 MLG0402Q1N3T

1.4 ±0.1,±0.2, ±0.3nH 2 100 10.0 15.8 0.60 0.30 250 MLG0402Q1N4T

1.5 ±0.1,±0.2, ±0.3nH 2 100 10.0 15.6 0.60 0.37 220 MLG0402Q1N5T

1.6 ±0.1,±0.2, ±0.3nH 2 100 10.0 14.4 0.60 0.25 220 MLG0402Q1N6T

1.7 ±0.1,±0.2, ±0.3nH 2 100 10.0 13.4 0.60 0.25 200 MLG0402Q1N7T

1.8 ±0.1,±0.2, ±0.3nH 2 100 10.0 13.9 0.60 0.28 200 MLG0402Q1N8T

1.9 ±0.1,±0.2, ±0.3nH 2 100 9.0 12.2 0.60 0.27 200 MLG0402Q1N9T

2.0 ±0.1,±0.2, ±0.3nH 2 100 9.0 12.5 0.60 0.30 200 MLG0402Q2N0T

2.1 ±0.1,±0.2, ±0.3nH 2 100 8.0 11.8 0.70 0.36 200 MLG0402Q2N1T

2.2 ±0.1,±0.2, ±0.3nH 2 100 8.0 11.7 0.80 0.43 200 MLG0402Q2N2T

2.3 ±0.1,±0.2, ±0.3nH 2 100 7.0 11.0 0.80 0.46 200 MLG0402Q2N3T

2.4 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.9 0.80 0.43 200 MLG0402Q2N4T

2.5 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.5 0.80 0.54 200 MLG0402Q2N5T

2.6 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.7 0.80 0.54 200 MLG0402Q2N6T

2.7 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.7 0.80 0.54 200 MLG0402Q2N7T

2.8 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.4 0.80 0.56 200 MLG0402Q2N8T

2.9 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.0 0.80 0.52 200 MLG0402Q2N9T

3.0 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.0 0.80 0.45 200 MLG0402Q3N0T

3.1 ±0.1,±0.2, ±0.3nH 2 100 7.0 9.7 0.90 0.58 200 MLG0402Q3N1T

3.2 ±0.1,±0.2, ±0.3nH 2 100 7.0 9.4 1.00 0.66 200 MLG0402Q3N2T

3.3 ±0.1,±0.2, ±0.3nH 2 100 7.0 10.0 1.10 0.73 180 MLG0402Q3N3T

3.4 ±0.1,±0.2, ±0.3nH 2 100 6.5 9.1 1.10 0.73 180 MLG0402Q3N4T

3.5 ±0.1,±0.2, ±0.3nH 2 100 6.0 9.0 1.10 0.74 180 MLG0402Q3N5T

3.6 ±0.1,±0.2, ±0.3nH 2 100 6.0 9.0 1.10 0.75 180 MLG0402Q3N6T

3.7 ±0.1,±0.2, ±0.3nH 2 100 6.0 8.9 1.10 0.73 180 MLG0402Q3N7T

3.8 ±0.1,±0.2, ±0.3nH 2 100 6.0 8.4 1.10 0.70 180 MLG0402Q3N8T

3.9 ±0.1,±0.2, ±0.3nH 2 100 6.0 8.8 1.20 0.77 180 MLG0402Q3N9T

4.0 ±0.1,±0.2, ±0.3nH 2 100 6.0 8.4 1.20 0.71 180 MLG0402Q4N0T

4.3 ±3%, ±0.3nH 2 100 6.0 8.6 1.20 0.77 180 MLG0402Q4N3T

4.7 ±3%, ±0.3nH 2 100 6.0 8.1 1.30 0.88 160 MLG0402Q4N7T

5.1 ±3%, ±0.3nH 2 100 6.0 7.8 1.40 0.90 160 MLG0402Q5N1T

5.6 ±3%, ±0.3nH 2 100 6.0 7.8 1.50 1.02 140 MLG0402Q5N6T

6.2 ±3%, ±0.3nH 2 100 5.5 7.2 1.50 1.04 140 MLG0402Q6N2T

6.8 ±3%, ±5% 2 100 5.5 6.9 1.60 1.12 140 MLG0402Q6N8T

7.5 ±3%, ±5% 2 100 5.0 6.7 1.70 1.13 140 MLG0402Q7N5T

8.2 ±3%, ±5% 2 100 4.5 6.2 1.80 1.16 140 MLG0402Q8N2T

9.1 ±3%, ±5% 2 100 4.0 5.7 1.80 1.20 140 MLG0402Q9N1T

10 ±3%, ±5% 3 100 4.0 5.3 2.10 1.45 140 MLG0402Q10NT

12 ±3%, ±5% 3 100 3.5 4.8 2.40 1.64 140 MLG0402Q12NT

15 ±3%, ±5% 3 100 3.0 4.5 2.60 1.77 140 MLG0402Q15NT

18 ±3%, ±5% 3 100 2.5 3.0 2.80 1.94 140 MLG0402Q18NT

22 ±3%, ±5% 3 100 2.2 2.7 3.20 2.18 130 MLG0402Q22NT

27 ±3%, ±5% 3 100 1.9 2.5 3.50 2.44 120 MLG0402Q27NT

33 ±3%, ±5% 3 100 1.7 2.2 3.80 2.71 120 MLG0402Q33NT

• All specifications are subject to change without notice.

(3/4)

002-02 / 20120821 / e521_mlg_02

L, Q vs. FREQUENCY CHARACTERISTICS

Part No. Inductance(nH)typ. Q typ.

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

MLG0402Q0N2 0.2 0.2 0.2 0.2 0.2 8 11 18 20 23

MLG0402Q0N3 0.3 0.3 0.3 0.3 0.3 7 9 15 16 19

MLG0402Q0N4 0.4 0.4 0.4 0.4 0.3 9 12 19 20 22

MLG0402Q0N5 0.5 0.5 0.4 0.4 0.4 9 12 19 21 23

MLG0402Q0N6 0.6 0.5 0.5 0.5 0.5 7 11 17 18 20

MLG0402Q0N7 0.7 0.7 0.6 0.6 0.6 8 11 18 19 22

MLG0402Q0N8 0.7 0.7 0.7 0.7 0.7 9 12 20 21 24

MLG0402Q0N9 0.8 0.8 0.8 0.8 0.8 10 13 21 23 26

MLG0402Q1N0 0.9 0.9 0.9 0.9 0.9 10 12 20 22 25

MLG0402Q1N1 1.0 1.0 1.0 1.0 1.0 9 12 20 22 25

MLG0402Q1N2 1.1 1.1 1.1 1.1 1.1 9 12 20 21 24

MLG0402Q1N3 1.2 1.2 1.2 1.2 1.2 9 12 20 22 25

MLG0402Q1N4 1.3 1.3 1.3 1.3 1.3 9 12 20 22 25

MLG0402Q1N5 1.4 1.4 1.4 1.4 1.4 9 12 19 21 23

MLG0402Q1N6 1.5 1.5 1.4 1.4 1.4 10 13 22 23 26

MLG0402Q1N7 1.6 1.5 1.5 1.5 1.5 10 13 21 23 25

MLG0402Q1N8 1.7 1.6 1.6 1.6 1.6 11 14 22 24 27

MLG0402Q1N9 1.8 1.8 1.7 1.7 1.7 10 14 22 24 27

MLG0402Q2N0 1.9 1.8 1.8 1.8 1.8 10 13 21 23 26

MLG0402Q2N1 2.0 2.0 1.9 1.9 1.9 10 14 22 24 27

MLG0402Q2N2 2.1 2.1 2.0 2.0 2.0 10 14 22 24 27

MLG0402Q2N3 2.2 2.2 2.1 2.1 2.2 10 13 21 23 25

MLG0402Q2N4 2.3 2.3 2.2 2.2 2.2 9 13 21 22 25

MLG0402Q2N5 2.4 2.4 2.3 2.3 2.4 10 13 21 22 25

MLG0402Q2N6 2.5 2.5 2.4 2.4 2.4 10 13 20 22 24

MLG0402Q2N7 2.5 2.5 2.5 2.5 2.5 10 13 21 23 25

MLG0402Q2N8 2.6 2.6 2.6 2.6 2.6 10 13 20 22 24

MLG0402Q2N9 2.7 2.7 2.7 2.7 2.7 10 13 20 21 23

MLG0402Q3N0 2.8 2.8 2.7 2.7 2.8 10 13 20 21 23

MLG0402Q3N1 2.9 2.9 2.9 2.9 2.9 9 12 19 21 23

MLG0402Q3N2 3.0 3.0 3.0 3.0 3.0 9 12 19 20 22

MLG0402Q3N3 3.2 3.1 3.1 3.1 3.1 9 12 19 21 23

MLG0402Q3N4 3.2 3.2 3.2 3.2 3.2 9 12 19 20 22

MLG0402Q3N5 3.3 3.3 3.3 3.3 3.3 9 12 19 20 22

MLG0402Q3N6 3.4 3.4 3.4 3.4 3.4 10 13 20 22 24

MLG0402Q3N7 3.5 3.5 3.4 3.5 3.5 9 12 19 21 23

MLG0402Q3N8 3.6 3.6 3.5 3.6 3.6 10 13 19 21 23

MLG0402Q3N9 3.7 3.7 3.7 3.7 3.7 9 12 19 20 22

MLG0402Q4N0 3.8 3.8 3.7 3.8 3.8 9 12 19 20 22

MLG0402Q4N3 4.1 4.0 4.0 4.0 4.1 10 13 21 23 25

MLG0402Q4N7 4.5 4.5 4.5 4.5 4.6 10 13 21 23 25

MLG0402Q5N1 4.8 4.8 4.8 4.8 4.9 10 13 20 22 24

MLG0402Q5N6 5.3 5.3 5.3 5.3 5.4 11 14 22 23 25

MLG0402Q6N2 5.9 5.8 5.9 5.9 6.0 11 14 21 23 25

MLG0402Q6N8 6.5 6.4 6.5 6.6 6.7 10 13 21 22 23

MLG0402Q7N5 7.1 7.0 7.1 7.2 7.4 11 14 22 23 25

MLG0402Q8N2 7.8 7.8 7.9 8.0 8.3 11 14 21 23 24

MLG0402Q9N1 8.6 8.5 8.7 8.8 9.1 11 14 21 23 24

MLG0402Q10N 9.5 9.5 9.8 9.9 10.3 11 14 21 22 23

MLG0402Q12N 11.4 11.4 11.9 12.2 12.8 11 13 20 21 21

MLG0402Q15N 14.1 14.0 14.8 15.2 16.2 11 14 20 21 21

MLG0402Q18N 17.0 17.2 21.3 23.3 29.2 11 13 16 16 13

MLG0402Q22N 20.7 21.1 28.1 32.0 45.2 10 12 13 12 9

MLG0402Q27N 25.3 25.7 34.1 38.9 10 12 12 11

MLG0402Q33N 31.0 32.2 52.2 10 12 10

• All specifications are subject to change without notice.

(4/4)

002-02 / 20120821 / e521_mlg_02

TYPICAL ELECTRICAL CHARACTERISTICS

INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS

PACKAGING STYLES

REEL DIMENSIONS TAPE DIMENSIONS

Inductance(nH)

Frequency(MHz)

10 100 1000 10000

1nH

15nH

10nH

Frequency(MHz)

10 100 1000 10000

1nH

15nH

10nH

1.0

ø180±2.0

2.0±0.5

ø13±0.2

ø21±0.8

ø60min.

14.4max.

Dimensions in mm

8.4 +2.0

–0.0

8.0±0.2 3.5±0.05

0.46±0.04

1.75±0.1

0.4max. 0.26±0.04 4.0±0.1

2.0±0.05 2.0±0.05

Sprocket hole Cavity

1.5 +0.1

–0.0

160min. Taping 200min.

300min.

Drawing direction

Dimensions in mm