High Speed, Low Noise
Video Op Amp
Data Sheet
AD829
Rev. I
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2011 Analog Devices, Inc. All rights reserved.
FEATURES
High speed
120 MHz bandwidth, gain = −1
230 V/µs slew rate
90 ns settling time to 0.1%
Ideal for video applications
0.02% differential gain
0.04° differential phase
Low noise
1.7 nV/Hz input voltage noise
1.5 pA/√Hz input current noise
Excellent dc precision
1 mV maximum input offset voltage (over temperature)
0.3 µV/°C input offset drift
Flexible operation
Specified for ±5 V to ±15 V operation
±3 V output swing into a 150 Ω load
External compensation for gains 1 to 20
5 mA supply current
Available in tape and reel in accordance with EIA-481A standard
GENERAL DESCRIPTION
The"% is a low noise (1.7 nV/√Hz), high speed op amp with
custom compensation that provides the user with gains of 1 to 20
while maintaining a bandwidth >50 MHz. Its 0.04° differential
phase and 0.02% differential gain performance at 3.58 MHz and
4.43 MHz, driving reverse-terminated 50 Ω or 75 Ω cables, makes
it ideally suited for professional video applications. The AD829
achieves its 230 V/µs uncompensated slew rate and 750 MHz
gain bandwidth while requiring only 5 mA of current from
power supplies.
The external compensation pin of the AD829 gives it
exceptional versatility. For example, compensation can be
selected to optimize the bandwidth for a given load and power
supply voltage. As a gain-of-2 line driver, the −3 dB bandwidth
can be increased to 95 MHz at the expense of 1 dB of peaking.
Its output can also be clamped at its external compensation pin.
The AD829 exhibits excellent dc performance. It offers a minimum
open-loop gain of 30 V/mV into loads as low as 500 Ω, a low input
voltage noise of 1.7 nV/√Hz, and a low input offset voltage of 1 mV
maximum. Common-mode rejection and power supply rejection
ratios are both 120 dB.
This op amp is also useful in multichannel, high speed data
conversion where its fast (90 ns to 0.1%) settling time is important.
In such applications, the AD829 serves as an input buffer for 8-bit to
10-bit ADCs and as an output I/V converter for high speed DACs.
CONNECTION DIAGRAM
Figure 1. 8-Lead PDIP (N), CERDIP (Q), and SOIC (R)
Figure 2. 20-Terminal LCC
Operating as a traditional voltage feedback amplifier, the AD829
provides many of the advantages that a transimpedance amplifier
offer. A bandwidth >50 MHz can be maintained for a range of
gains through the replacement of the external compensation
capacitor. The AD829 and the transimpedance amplifier are both
unity-gain stable and provide similar voltage noise performance
(1.7 nV/√Hz); however, the current noise of the AD829
(1.5 pA/√Hz) is less than 10% of the noise of transimpedance
amplifiers. The inputs of the AD829 are symmetrical.
PRODUCT HIGHLIGHTS
1. The input voltage noise of 2 nV/√Hz, current noise of
1.5 pA/√Hz, and 50 MHz bandwidth for gains of 1 to 20
make the AD829 an ideal preamp.
2. A differential phase error of 0.04 and a 0.02% differential
gain error, at the 3.58 MHz NTSC, 4.43 MHz PAL, and
SECAM color subcarrier frequencies, make the op amp an
outstanding video performer for driving reverse-terminated
50 Ω and 75 Ω cables to ±1 V (at their terminated end).
3. The AD829 can drive heavy capacitive loads.
4. Performance is fully specified for operation from ±5 V
to ±15 V supplies.
5. The AD829 is available in PDIP, CERDIP, and small outline
packages. Chips and MIL-STD-883B parts are also available.
The 8-lead SOIC is available for the extended temperature
range (−40°C to +125°C).
AD829
TOP VIEW
(Not to Scale)
OFFSET NULL
1
–IN
2
+IN
3
–V
S4
OFFSET NULL
+V
S
OUTPUT
C
COMP
8
7
6
5
00880-001
00880-002
20 19123
18
14
15
16
17
4
5
6
7
8
9 10 11 12 13
NC
+V
NC
OUTPUT
NC
NC = NO CONNECT
NC
NC
NC
–V
NC
C
COMP
NC
OFFSET
NULL
OFFSET
NULL
NC
–IN
NC
+IN
NC
NC
AD829
TOP VIEW
(Not to Scale)
AD829 Data Sheet
Rev. I | Page 2 of 20
TABLE OF CONTENTS
Features .............................................................................................. 1
General Description ......................................................................... 1
Connection Diagram ....................................................................... 1
Product Highlights ........................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Absolute Maximum Ratings ............................................................ 5
Thermal Characteristics .............................................................. 5
Metallization Photo ...................................................................... 5
ESD Caution .................................................................................. 5
Typical Performance Characteristics ............................................. 6
Test Circuits ..................................................................................... 11
Theory of Operation ...................................................................... 12
Externally Compensating the AD829 ...................................... 12
Shunt Compensation ................................................................. 12
Current Feedback Compensation ............................................ 13
Low Error Video Line Driver ................................................... 15
High Gain Video Bandwidth, 3-Op-Amp Instrumentation
Amplifier ..................................................................................... 16
Outline Dimensions ....................................................................... 17
Ordering Guide .......................................................................... 19
REVISION HISTORY
10/11—Re v. H to Rev. I
Change to Table 2 ............................................................................. 5
4/09—Rev. G to Rev. H
Changes to Features .......................................................................... 1
Changes to Quiescent Current Parameter, Table 1 ...................... 4
Changes to Table 2 ............................................................................ 5
Added Thermal Characteristics Section and Table 3 .................. 5
Updated Outline Dimensions ....................................................... 17
Changes to Ordering Guide .......................................................... 19
4/04—Re v. F to Re v. G
Added Figure 1; Renumbered Sequentially .................................. 4
Changes to Ordering Guide ............................................................ 5
Updated Table I ............................................................................... 11
Updated Figure 15 .......................................................................... 12
Updated Figure 16 .......................................................................... 13
Updated Outline Dimensions ....................................................... 14
2/03—Re v. E to Rev. F
Renumbered Figures ......................................................... Universal
Changes to Product Highlights ....................................................... 1
Changes to Specifications ................................................................. 2
Changes to Absolute Maximum Ratings ........................................ 4
Changes to Ordering Guide ............................................................. 4
Updated Outline Dimensions ....................................................... 13
Data Sheet AD829
Rev. I | Page 3 of 20
SPECIFICATIONS
TA = 25°C and VS = ±15 V dc, unless otherwise noted.
Table 1.
AD829JR AD829AR AD829AQ/AD829S
Parameter Conditions VS Min Typ Max Min Typ Max Min Typ Max Unit
INPUT OFFSET VOLTAGE tMIN to tMAX ±5 V,
±15 V
0.2 1 0.2 1 0.1 0.5 mV
1 1 0.5 mV
Offset Voltage Drift ±5 V,
±15 V
0.3 0.3 0.3 µV/°C
INPUT BIAS CURRENT ±5 V,
±15 V
3.3 7 3.3 7 3.3 7 µA
tMIN to tMAX 8.2 9.5 9.5 µA
INPUT OFFSET CURRENT ±5 V,
±15 V
50 500 50 500 50 500 nA
tMIN to tMAX 500 500 500 nA
Offset Current Drift ± 5 V,
±15 V
0.5 0.5 0.5 nA/°C
OPEN-LOOP GAIN VO = ±2.5 V,
RL = 500 Ω
±5 V 30 65 30 65 30 65 V/mV
RL = 150 Ω 40 40 40 V/mV
tMIN to tMAX 20 20 20 V/mV
VO = ±10 V,
RL = 1
±15 V 50 100 50 100 50 100 V/mV
RL = 500 Ω 85 85 85 V/mV
tMIN to tMAX 20 20 20 V/mV
DYNAMIC PERFORMANCE
Gain Bandwidth Product ±5 V 600 600 600 MHz
±15 V 750 750 750 MHz
Full Power Bandwidth1, 2 VO = 2 V p-p,
RL = 500 Ω
±5 V 25 25 25 MHz
V
O
= 20 V p-p,
RL = 1 kΩ
3.6
3.6
3.6
MHz
Slew Rate2 RL = 500 Ω ±5 V 150 150 150 V/µs
RL = 1 ±15 V 230 230 230 V/µs
Settling Time to 0.1% AV = –19
−2.5 V to
+2.5 V
±5 V 65 65 65 ns
10 V step ±15 V 90 90 90 ns
Phase Margin2 CL = 10 pF ±15 V
RL = 1 60 60 60 Degrees
DIFFERENTIAL GAIN ERROR3 RL = 100 Ω,
CCOMP = 30 pF
±15 V 0.02 0.02 0.02 %
DIFFERENTIAL PHASE ERROR3 RL = 100 Ω,
CCOMP = 30 pF
±15 V 0.04 0.04 0.04 Degrees
COMMON-MODE REJECTION
V
CM
= ±2.5 V
100
120
100
120
100
120
dB
VCM = ±12 V ±15 V 100 120 100 120 100 120 dB
tMIN to tMAX 96 96 96 dB
POWER SUPPLY REJECTION
VS = ±4.5 V
to ±18 V
98
120
98
120
98
120
dB
tMIN to tMAX 94 94 94 dB
INPUT VOLTAGE NOISE f = 1 kHz ±15 V 1.7 2 1.7 2 1.7 2 nV/√Hz
INPUT CURRENT NOISE f = 1 kHz ±15 V 1.5 1.5 1.5 pA/√Hz
AD829 Data Sheet
Rev. I | Page 4 of 20
AD829JR AD829AR AD829AQ/AD829S
Parameter Conditions VS Min Typ Max Min Typ Max Min Typ Max Unit
INPUT COMMON-MODE
VOLTAGE RANGE
±5 V +4.3 +4.3 +4.3 V
−3.8 −3.8 −3.8 V
±15 V +14.3 +14.3 +14.3 V
−13.8 −13.8 −13.8 V
OUTPUT VOLTAGE SWING RL = 500 Ω ±5 V ±3.0 ±3.6 ±3.0 ±3.6 ±3.0 ±3.6 V
RL = 150 Ω ±5 V ±2.5 ±3.0 ±2.5 ±3.0 ±2.5 ±3.0 V
RL = 50 Ω ±5 V ±1.4 ±1.4 ±1.4 V
RL = 1 ±15 V ±12 ±13.3 ±12 ±13.3 ±12 ±13.3 V
RL = 500 Ω ±15 V ±10 ±12.2 ±10 ±12.2 ±10 ±12.2 V
Short-Circuit Current ±5 V,
±15 V
32 32 32 mA
INPUT CHARACTERISTICS
Input Resistance
(Differential)
13 13 13
Input Capacitance
(Differential)4
5 5 5 pF
Input Capacitance
(Common Mode)
1.5 1.5 1.5 pF
CLOSED-LOOP OUTPUT
RESISTANCE
AV = +1,
f = 1 kHz
2 2 2
POWER SUPPLY
Operating Range ±4.5 ±18 ±4.5 ±18 ±4.5 ±18 V
Quiescent Current ±5 V 5 6.5 5 6.5 5 6.5 mA
tMIN to tMAX 8.0 8.0 8.7 mA
5.3
6.8
5.3
6.8
5.3
6.8
mA
tMIN to tMAX 8.3 9.0 9.0 mA
TRANSISTOR COUNT Number of
transistors
46 46 46
1 Full power bandwidth = slew rate/2 π VPEAK.
2 Tested at gain = 20, CCOMP = 0 pF.
3 3.58 MHz (NTSC) and 4.43 MHz (PAL and SECAM).
4 Differential input capacitance consists of 1.5 pF package capacitance plus 3.5 pF from the input differential pair.
Data Sheet AD829
Rev. I | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Supply Voltage ±18 V
Internal Power Dissipation1
8-Lead PDIP (N) 1.3 W
8-Lead SOIC (R) 0.9 W
8-Lead CERDIP (Q) 1.3 W
20-Terminal LCC (E) 0.8 W
Differential Input Voltage2 ±6 V
Output Short-Circuit Duration
Indefinite
Storage Temperature Range
8-Lead CERDIP (Q) and 20-Terminal LCC (E) −65°C to +150°C
8-Lead PDIP (N) and 8-Lead SOIC (R) −65°C to +125°C
Operating Temperature Range
AD829J C to 70°C
AD829A
−40°C to +125°C
AD829S −55°C to +125°C
Lead Temperature (Soldering, 60 sec) 300°C
1 Maximum internal power dissipation is specified so that TJ does not exceed
150°C at an ambient temperature of 25°C.
2 If the differential voltage exceeds 6 V, external series protection resistors
should be added to limit the input current.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS
Table 3.
Package Type θJA Unit
8-Lead PDIP (N)
100 (derates at 8.7 mW/°C)
°C/W
8-Lead CERDIP (Q) 110 (derates at 8.7 mW/°C) °C/W
20-Lead LCC (E) 77 °C/W
8-Lead SOIC (R) 125 (derates at 6 mW/°C) °C/W
METALLIZATION PHOTO
Figure 3. Metallization Photo; Contact Factory for Latest Dimensions,
Dimensions Shown in Inches and (Millimeters)
Figure 4. Maximum Power Dissipation vs. Temperature
ESD CAUTION
00880-003
–IN
2
OFFSET NULL
1
0.054
(1.37)
0.067 ( 1.70)
SUBSTRATE CONNECTED TO + V
S
OFFSET NULL
8+V
S
7
–V
S
4
C
COMP
5
OUTPUT
6
+IN
3
00880-004
AMBIENT TEMPERATURE (°C)
MAXIMUM POWER DISSIPATION (W)
–55 –45 –35 –25 –15 –5 5 15 25 35 45 55 65 75 85 95 105 115
0
0.5
1.0
1.5
2.0
2.5
125
CERDIP
SOIC
PDIP LCC
AD829 Data Sheet
Rev. I | Page 6 of 20
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 5. Input Common-Mode Range vs. Supply Voltage
Figure 6. Output Voltage Swing vs. Supply Voltage
Figure 7. Output Voltage Swing vs. Resistive Load
Figure 8. Quiescent Current vs. Supply Voltage
Figure 9. Input Bias Current vs. Temperature
Figure 10. Closed-Loop Output Impedance vs. Frequency
00880-005
SUPPLY VOLTAGE (±V)
INPUT COMMON-MODE RANGE (V)
0 5 10 15
0
5
10
15
20
20
+VOUT
–VOUT
00880-006
SUPPLY VOLT AGE (±V)
MAGNITUDE OF THE OUTPUT VOLTAGE (V)
0 5 10 15
0
5
10
15
20
20
+VOUT
–VOUT
RL = 1kΩ
00880-007
LOAD RESISTANCE ()
OUTPUT VOLTAGE SWING (V p-p)
10 100 1k
0
5
10
25
20
15
30
10k
±15V
SUPPLIES
±5V
SUPPLIES
00880-008
SUPPLY VOLTAGE (±V)
QUIESCENT CURRENT (mA)
0 5 10 15
4.0
4.5
5.0
5.5
6.0
20
00880-009
TEMPERATURE (°C)
INPUT BIAS CURRENT (µA)
–60 –40 –20 0 20 40 60 80 100 120
–2
–3
–4
–5
140
V
S
= ±5V, ±15V
00880-010
FREQUENCY (Hz)
CLOSED-LOOP OUTPUT IMPEDANCE ()
1k 10k 100k 1M 10M
0.001
0.01
0.1
1
10
100
100M
AV = 20
CCOMP = 0pF
AV = 1
CCOMP = 68pF
Data Sheet AD829
Rev. I | Page 7 of 20
Figure 11. Quiescent Current vs. Temperature
Figure 12. Short-Circuit Current Limit vs. Ambient Temperature
Figure 13. –3 dB Bandwidth vs. Temperature
Figure 14. Open-Loop Gain and Phase vs. Frequency
Figure 15. Open-Loop Gain vs. Resistive Load
Figure 16. Power Supply Rejection Ratio (PSRR) vs. Frequency
00880-011
TEMPERATURE (°C)
QUIESCENT CURRENT (mA)
–60 –40 –20 0 20 40 60 80 100 120
3
7
6
5
4
140
V
S
= ±15V
V
S
= ±5V
00880-012
AMBI E NT TE M P E RATURE ( °C)
SHO RT-CI RCUIT CURRE NT L IMIT ( mA)
–60 –40 –20 020 40 60 80 100 120
15
40
30
35
25
20
140
NEGATIVE
CURRENT LIM IT
POSITIVE
CURRENT LIM IT
VS = ±5V
00880-013
TEMPERATURE (°C)
–3dB BANDWIDTH (M Hz )
–60 –40 –20 020 40 60 80 100 120
45
65
60
55
50
140
VS = ±15V
AV = +20
CCOMP = 0pF
00880-014
FREQUENCY (Hz)
OPEN-LOOP GAIN (dB)
PHASE (Degrees)
100 1k 10k 100k 1M 10M
0
120
100
80
60
40
20
–20
100
80
60
40
20
0
100M
PHASE
GAIN
±5V
SUPPLIES
500 LOAD
GAIN
±15V
SUPPLIES
1k LOAD
CCOMP = 0pF
00880-015
LOAD RESISTANCE ()
OPEN-LOOP GAIN (dB)
10 100 1k
75
80
85
90
95
100
105
10k
VS = ±15V
VS = ±5V
00880-016
FREQUENCY (Hz)
PSRR (dB)
1k 10k 100k 1M 10M
20
120
100
60
80
40
100M
+SUPPLY
–SUPPLY
CCOMP = 0pF
AD829 Data Sheet
Rev. I | Page 8 of 20
Figure 17. Common-Mode Rejection Ratio (CMRR) vs. Frequency
Figure 18. Large Signal Frequency Response
Figure 19. Output Swing and Error vs. Settling Time
Figure 20. Total Harmonic Distortion (THD) vs. Frequency
Figure 21. Second and Third THD vs. Frequency
Figure 22. Input Voltage Noise Spectral Density
00880-017
FREQUENCY (Hz)
CMRR (dB)
1k 10k 100k 1M 10M
20
120
100
60
80
40
100M
CCOMP = 0pF
00880-018
INP UT FRE QUENCY ( M Hz )
OUTPUT VOLTAGE (V p-p)
110
0
5
10
15
20
25
30
100
V
S
= ±15V
R
L
= 1kΩ
A
V
= +20
C
COMP
= 0pF
V
S
= ±5V
R
L
= 500Ω
A
V
= +20
C
COMP
= 0pF
00880-019
SETTLING TIME (ns)
OUTPUT SWING FROM 0 TO ±V
0 20 40 60 80 100 120 140
–10
–8
–6
–4
–2
0
2
4
6
8
10
160
1%
1%
0.1%
0.1%
ERROR
AV = –19
CCOMP = 0pF
00880-020
FRE QUENCY ( Hz )
THD ( dB)
100 300 1k 3k 10k 30k
–110
–105
–100
–95
–90
–85
–80
–75
–70
100k
V
IN
= 3V RMS
A
V
= –1
C
COMP
= 30pF
C
L
= 100pF
R
L
= 500Ω
R
L
= 2kΩ
00880-021
FRE QUENCY ( Hz )
THD ( dB)
0500k 1.0M 1.5M
–70
–20
–30
–40
–50
–60
2.0M
THIRD HARMO NIC
SECOND HARMO NIC
V
IN
= 2.25V RM S
A
V
= –1
R
L
= 250Ω
C
L
= 0pF
C
COMP
= 30pF
00880-022
FRE QUENCY ( Hz )
INPUT VOLTAGE NOISE (nV/ Hz)
10 100 1k 10k 100k 1M
0
5
4
3
2
1
10M
Data Sheet AD829
Rev. I | Page 9 of 20
Figure 23. Slew Rate vs. Temperature
Figure 24. Differential Phase and Gain vs. Supply Voltage
Figure 25. Gain-to-2 Follower Large Signal Pulse Response (See Figure 32)
Figure 26. Gain-of-2 Follower Small Signal Pulse Response (See Figure 32)
Figure 27. Gain-of-20 Follower Large Signal Pulse Response (See Figure 33)
Figure 28. Gain-of-20 Follower Small Signal Pulse Response (See Figure 33)
00880-023
–60 –40 –20 020 40 60 80 100 120
100
400
350
300
250
200
150
140
RISE
FALL
RISE
FALL
V
S
= ±15V
V
S
= ±5V
A
V
= +20
SLEW RATE 10% TO 90%
SLEW RATE (V/µs)
TEMPERAT URE ( °C)
00880-024
SUPPLY VOLT AGE (V)
DIFFE RE NTI AL PHAS E ( Degrees)
DIFFERENTIAL GAIN (%)
±5 ±10
0.03
0.05
0.04
0.03
0.02
0.01
±15
0.043°
DIFFERENTIAL GAIN
DIFFE RE NTI AL PHAS E
00880-027
200mV 50ns
0%
10
90
00880-028
20mV 20ns
0%
10
90
100%
00880-030
2V 50ns
0%
10
90
100%
00880-031
50mV 20ns
0%
10
90
100%
AD829 Data Sheet
Rev. I | Page 10 of 20
Figure 29. Unity-Gain Inverter Large Signal Pulse Response (See Figure 34)
Figure 30. Unity-Gain Inverter Small Signal Pulse Response (See Figure 34)
00880-033
200mV 50ns
0%
10
90
100%
00880-034
20mV 20ns
0%
10
90
100%
Data Sheet AD829
Rev. I | Page 11 of 20
TEST CIRCUITS
Figure 31. Offset Null and External Shunt Compensation Connections
Figure 32. Follower Connection, Gain = 2
Figure 33. Follower Connection, Gain = 20
Figure 34. Unity-Gain Inverter Connection
00880-025
1
2
38
5
7
46
+
AD829
–VS
+VS
OFFSET
NULL
ADJUST
20k
0.1µF
0.1µF
CCOMP
(EXTERNAL)
00880-026
3
2
7
5
6
4
+
AD829
+15V
–15V
0.1µF
5pF 300kΩ
300kΩ
C
COMP
15pF
0.1µF
50Ω
CABLE
50Ω
50Ω
50Ω
TEKTRONIX
TY P E 7A24
PREAMP
50Ω
CABLE
HP8130A
5ns RISE TIME
00880-029
2
3
7
6
4
+
AD829
+15V
–15V
0.1µF
1pF 2kΩ
105kΩ
0.1µF
5Ω
100Ω
50Ω
CABLE
HP8130A
5ns RISE TIME
TEKTRONIX
TY P E 7A24
PREAMP
FET
PROBE
45Ω
C
COMP
= 0pF
00880-032
2
3
7
6
4
+
AD829
+15V
–15V
0.1µF
0.1µF
5CCOMP
15pF
50Ω
HP8130A
5ns RISE TIME
50Ω
CABLE 50Ω
CABLE
300Ω
50Ω
5pF
300Ω
50Ω
TEKTRONIX
TY P E 7A24
PREAMP
AD829 Data Sheet
Rev. I | Page 12 of 20
THEORY OF OPERATION
The AD829 is fabricated on the Analog Devices, Inc., proprietary
complementary bipolar (CB) process, which provides PNP and
NPN transistors with similar fTs of 600 MHz. As shown in
Figure 35, the AD829 input stage consists of an NPN differential
pair in which each transistor operates at a 600 µA collector current.
This gives the input devices a high transconductance, which in
turn gives the AD829 a low noise figure of 2 nV/√Hz at 1 kHz.
Figure 35. Simplified Schematic
The input stage drives a folded cascode that consists of a fast pair of
PNP transistors. These PNPs drive a current mirror that provides a
differential-input-to-single-ended-output conversion. The high
speed PNPs are also used in the current-amplifying output stage,
which provides a high current gain of 40,000. Even under heavy
loading conditions, the high fTs of the NPN and PNPs, produced
using the CB process, permit cascading two stages of emitter
followers while maintaining 60 phase margin at closed-loop
bandwidths greater than 50 MHz.
Two stages of complementary emitter followers also effectively
buffer the high impedance compensation node (at the CCOMP pin)
from the output so that the AD829 can maintain a high dc open-
loop gain, even into low load impedances (92 dB into a 150 Ω
load and 100 dB into a 1 kΩ load). Laser trimming and PTAT
biasing ensure low offset voltage and low offset voltage drift,
enabling the user to eliminate ac coupling in many applications.
For added flexibility, the AD829 provides access to the internal
frequency compensation node. This allows users to customize the
frequency response characteristics for a particular application.
Unity-gain stability requires a compensation capacitance of 68 pF
(Pin 5 to ground), which yields a small signal bandwidth of
66 MHz and slew rate of 16 V/µs. The slew rate and gain
bandwidth product varies inversely with compensation
capacitance. Table 4 and Figure 37 show the optimum
compensation capacitance and the resulting slew rate for
a desired noise gain.
For gains between 1 and 20, choose CCOMP to keep the small signal
bandwidth relatively constant. The minimum gain that will still
provide stability depends on the value of the external
compensation capacitance.
An RC network in the output stage (see Figure 35) completely
removes the effect of capacitive loading when the amplifier
compensates for closed-loop gains of 10 or higher. At low
frequencies, and with low capacitive loads, the gain from the
compensation node to the output is very close to unity. In this case,
C is bootstrapped and does not contribute to the compensation
capacitance of the device. As the capacitive load increases, a pole
forms with the output impedance of the output stage, which
reduces the gain, and subsequently, C is incompletely
bootstrapped. Therefore, some fraction of C contributes to the
compensation capacitance, and the unity-gain bandwidth falls.
As the load capacitance is further increased, the bandwidth
continues to fall, and the amplifier remains stable.
EXTERNALLY COMPENSATING THE AD829
The AD829 is stable with no external compensation for noise
gains greater than 20. For lower gains, two different methods of
frequency compensating the amplifier can be used to achieve
closed-loop stability: shunt and current feedback compensation.
SHUNT COMPENSATION
Figure 36 and Figure 37 show that shunt compensation has an
external compensation capacitor, CCOMP, connected between the
compensation pin and ground. This external capacitor is tied in
parallel with approximately 3 pF of internal capacitance at the
compensation node. In addition, a small capacitance, CLEAD, in
parallel with resistor R2, compensates for the capacitance at the
inverting input of the amplifier.
Figure 36. Inverting Amplifier Connection Using External Shunt
Compensation
Figure 37. Noninverting Amplifier Connection Using External Shunt
Compensation
Table 4 gives the recommended CCOMP and CLEAD values, as well
as the corresponding slew rates and bandwidth. The capacitor
values were selected to provide a small signal frequency response
with <1 dB of peaking and <10% overshoot. For Table 4, ±15 V
00880-035
–IN+IN
1.2mA
OFFSET NULL
C
12.5pF R
500
OUTPUT
+V
S
–V
S
C
COMP
15
15
00880-036
2
3
7
6
4
+
AD829
+V
S
–V
S
0.1µF
0.1µF
5
C
COMP
50
50
COAX
CABLE R1
C
LEAD
R2
V
OUT
1k
V
IN
00880-037
3
2
7
6
4
+
AD829
+V
S
–V
S
0.1µF
0.1µFC
LEAD
5
C
COMP
50
50
CABLE
V
OUT
R2
R1
1k
V
IN
Data Sheet AD829
Rev. I | Page 13 of 20
supply voltages should be used. Figure 38 is a graphical extension
of Table 4, which shows the slew rate/gain trade-off for lower
closed-loop gains, when using the shunt compensation scheme.
Figure 38. Value of CCOMP and Slew Rate vs. Noise Gain
CURRENT FEEDBACK COMPENSATION
Bipolar, nondegenerated, single-pole, and internally
compensated amplifiers have their bandwidths defined as
COMP
COMP
e
T
C
q
kT
I
Cr
f
π
=
π
=
2
2
1
where:
fT is the unity-gain bandwidth of the amplifier.
I is the collector current of the input transistor.
CCOMP is the compensation capacitance.
re is the inverse of the transconductance of the input transistors.
kT/q approximately equals 26 mV at 27°C.
Because both fT and slew rate are functions of the same variables,
the dynamic behavior of an amplifier is limited. Because
COMP
C
I
RateSlew
2
=
then
q
kT
f
RateSlew
T
π= 4
This shows that the slew rate is only 0.314 V/µs for every mega-
hertz of bandwidth. The only way to increase the slew rate is to
increase the fT, and that is difficult because of process limitations.
Unfortunately, an amplifier with a bandwidth of 10 MHz can
only slew at 3.1 V/µs, which is barely enough to provide a full
power bandwidth of 50 kHz.
The AD829 is especially suited to a form of current feedback
compensation that allows for the enhancement of both the full
power bandwidth and the slew rate of the amplifier. The voltage
gain from the inverting input pin to the compensation pin is
large; therefore, if a capacitance is inserted between these pins,
the bandwidth of the amplifier becomes a function of its feed-
back resistor and the capacitance. The slew rate of the amplifier
is now a function of its internal bias (2I) and the compensation
capacitance.
Table 4. Component Selection for Shunt Compensation
Follower Gain Inverter Gain R1 (Ω) R2 (Ω) CLEAD (pF) CCOMP (pF) Slew Rate (V/µs) 3 dB Small Signal Bandwidth (MHz)
1 Open 100 0 68 16 66
2 −1 1 k 1 k 5 25 38 71
5 −4 511 2.0 k 1 7 90 76
10 −9 226 2.05 k 0 3 130 65
20 −19 105 2 k 0 0 230 55
25
−24
105
2.49
0
0
230
39
100 −99 20 2 k 0 0 230 7.5
00880-038
NOISE GAIN
C
COMP
(pF)
SLEW RATE (V/µs)
1 10
1
10
100
10
100
1k
100
SLEW RATE
C
COMP
V
S
= ±15V
AD829 Data Sheet
Rev. I | Page 14 of 20
Because the closed-loop bandwidth is a function of RF and
CCOMP (see Figure 39), it is independent of the amplifier closed-
loop gain, as shown in Figure 41. To preserve stability, the time
constant of RF and CCOMP needs to provide a bandwidth of
<65 MHz. For example, with CCOMP = 15 pF and RF = 1 kΩ, the
small signal bandwidth of the AD829 is 10 MHz. Figure 40
shows that the slew rate is in excess of 60 V/µs. As shown in
Figure 41, the closed-loop bandwidth is constant for gains of
−1 to −4; this is a property of the current feedback amplifiers.
Figure 39. Inverting Amplifier Connection Using Current Feedback
Compensation
Figure 40. Large Signal Pulse Response of Inverting Amplifier Using Current
Feedback Compensation, CCOMP = 15 pF, C1 = 15 pF RF = 1 kΩ, R1 = 1 kΩ
Figure 41. Closed-Loop Gain vs. Frequency for the Circuit of Figure 38
Figure 42 is an oscilloscope photo of the pulse response of a unity-
gain inverter that has been configured to provide a small signal
bandwidth of 53 MHz and a subsequent slew rate of 180 V/µs;
RF = 3 kΩ and CCOMP = 1 pF. Figure 43 shows the excellent pulse
response as a unity-gain inverter, this using component values
of RF = 1 kΩ and CCOMP = 4 pF.
Figure 42. Large Signal Pulse Response of the Inverting Amplifier Using
Current Feedback Compensation, CCOMP = 1 pF, RF = 3 kΩ, R1 = 3 k
Figure 43. Small Signal Pulse Response of Inverting Amplified Using Current
Feedback Compensation, CCOMP = 4 pF, RF = 1 kΩ, R1 = 1 kΩ
00880-039
2
3
7
6
4
+
AD829
+V
S
–V
S
0.1µF
5
0.1µF
C1*
50
50
COAX
CABLE R1
C
COMP
R
F
V
OUT
R
L
1k
V
IN
IN4148
*RECOMMENDED VALUE
OF C
COMP
FOR C1
<7pF 0pF
7pF 15pF
C
COMP
SHOULD NEVER EXCEED
15pF FOR THIS CONNECTION
00880-040
5V 200ns
0%
10
90
100%
00880-041
FREQUENCY (Hz)
CLOSED-LOOP GAIN (dB)
100k 1M 10M
–15
–12
–9
–6
–3
0
3
6
9
12
15
100M
GAIN = –4
–3dB @ 8.2MHz
GAIN = –2
–3dB @ 9.6MHz
GAIN = –1
–3dB @ 10.2MHz
VIN = –30dBm
VS = ±15V
RL = 1k
RF = 1k
CCOMP = 15pF
C1 = 15pF
00880-042
5V 200ns
0%
10
90
100%
00880-043
20mV
10ns
0%
10
90
100%
Data Sheet AD829
Rev. I | Page 15 of 20
Figure 44 and Figure 45 show the closed-loop frequency
response of the AD829 for different closed-loop gains and
different supply voltages.
Figure 44. Closed-Loop Frequency Response for the Inverting Amplifier Using
Current Feedback Compensation
Figure 45. Closed-Loop Frequency Response vs. Supply for the Inverting
Amplifier Using Current Feedback Compensation
When a noninverting amplifier configuration using a current
feedback compensation is needed, the circuit shown in Figure 46 is
recommended. This circuit provides a slew rate twice that of the
shunt compensated noninverting amplifier of Figure 47 at the
expense of gain flatness. Nonetheless, this circuit delivers 95 MHz
bandwidth with 1 dB flatness into a back-terminated cable,
with a differential gain error of only 0.01% and a differential
phase error of only 0.015 at 4.43 MHz.
Figure 46. Noninverting Amplifier Connection Using Current Feedback
Compensation
Figure 47. Video Line Driver with a Flatness over Frequency Adjustment
LOW ERROR VIDEO LINE DRIVER
The buffer circuit shown in Figure 47 drives a back-terminated
75 Ω video line to standard video levels (1 V p-p), with 0.1 dB
gain flatness to 30 MHz and with only 0.0and 0.02% differential
phase and gain at the 4.43 MHz PAL color subcarrier frequency.
This level of performance, which meets the requirements for
high definition video displays and test equipment, is achieved
using only 5 mA quiescent current.
00880-044
FREQUENCY (MHz)
CLOSED-LOOP GAIN (dB)
1 10
–15
–12
–9
–6
–3
0
3
6
9
12
15
100
GAIN = –4
CCOMP = 2pF
GAIN = –2
CCOMP = 3pF
GAIN = –1
CCOMP = 4pF
VS = ±15V
RL = 1k
RF = 1k
VIN = –30dBm
00880-045
FREQUENCY (MHz)
OUTPUT LEVEL (dB)
1 10
–47
–44
–41
–38
–35
–32
–29
–26
–23
–20
–17
100
±5V
±15V
VIN = –20dBm
RL = 1k
RF = 1k
GAIN = –1
CCOMP = 4pF
00880-046
3
2
7
6
4
5
+
AD829
+15V
–15V
0.1µF
3pF
C
COMP
2k
2k
0.1µF
50
50k
50
50
COAX
CABLE 50
COAX
CABLE
V
IN
V
OUT
00880-047
3
2
7
6
54
+
AD829
+15V
0.1µF
30pF
C
COMP
–15V 0.1µF300
300
75
75
75
50
COAX
CABLE
V
IN
V
OUT
OPTIONAL
2pF TO 7pF
FLATNESS
TRIM
AD829 Data Sheet
Rev. I | Page 16 of 20
HIGH GAIN VIDEO BANDWIDTH, 3-OP-AMP
INSTRUMENTATION AMPLIFIER
Figure 48 shows a 3-op-amp instrumentation amplifier circuit
that provides a gain of 100 at video bandwidths. At a circuit gain of
100, the small signal bandwidth equals 18 MHz into a FET probe.
Small signal bandwidth equals 6.6 MHz with a 50 load. The
0.1% settling time is 300 ns.
The input amplifiers operate at a gain of 20, while the output
op amp runs at a gain of 5. In this circuit, the main bandwidth
limitation is the gain/bandwidth product of the output amplifier.
Extra care should be taken while breadboarding this circuit
because even a couple of extra picofarads of stray capacitance at the
compensation pins of A1 and A2 will degrade circuit bandwidth.
Figure 48. High Gain Video Bandwidth, 3-Op-Amp In-Amp Circuit
00880-048
+15V
–15V
COMM
10µF
10µF
0.1µF
0.1µF
1µF
1µF
0.1µF
0.1µF
+V
S
–V
S
PI N 4
EACH
AMPLIFIER
PI N 7
100Hz
1MHz
10MHz
64.6dB
44.7dB
23.9dB
INPUT
FREQUENCY CMRR
A1
AD829
2pF TO 8pF
SETTLING TIME
AC CMR ADJUST
3pF
3pF
1pF
1pF
2kΩ
200Ω
RG
210Ω
1kΩ
2kΩ
200Ω
970Ω
50Ω
2kΩ (G = 5)
5
3
2
6
DC CMR
ADJUST
3pF
(G = 20)
(G = 20)
A2
AD829
A3
AD848
+VIN
+VIN
CIRCUIT GAI N = + 1
4000Ω
RG5
5
2
3
6
5
3
2
6
Data Sheet AD829
Rev. I | Page 17 of 20
OUTLINE DIMENSIONS
Figure 49. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Figure 50. 8-Lead Plastic Dual In-Line Package [PDIP]
Narrow Body
(N-8)
Dimensions shown in inches and (millimeters)
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
COMPLIANT TO JEDEC STANDARDS MS-012-AA
012407-A
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
0.50 (0.0196)
0.25 (0.0099) 45°
1.75 (0.0688)
1.35 (0.0532)
SEATING
PLANE
0.25 (0.0098)
0.10 (0.0040)
4
1
8 5
5.00(0.1968)
4.80(0.1890)
4.00 (0.1574)
3.80 (0.1497)
1.27 (0.0500)
BSC
6.20 (0.2441)
5.80 (0.2284)
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
COMPLIANT TO JE DE C S TANDARDS MS - 001
CONTROLLING DIMENSIONS ARE IN INCHES; MILL I MET ER DIMENSIONS
(IN PARENTHESES) ARE ROUNDE D- OFF I NCH E QUIVALENTS FOR
REF E RE NCE ONLY AND ARE NOTAPPROPRIATE FOR USE IN DESIGN.
CORNE R LEADS MAY BE CONFIG URE D AS W HOLE OR HAL F L E ADS .
070606-A
0.022 ( 0.56)
0.018 ( 0.46)
0.014 ( 0.36)
SEATING
PLANE
0.015
(0.38)
MIN
0.210 (5.33)
MAX
0.150 ( 3.81)
0.130 ( 3.30)
0.115 (2.92)
0.070 ( 1.78)
0.060 ( 1.52)
0.045 ( 1.14)
8
14
5
0.280 ( 7.11)
0.250 ( 6.35)
0.240 ( 6.10)
0.100 ( 2.54)
BSC
0.400 ( 10.16)
0.365 ( 9.27)
0.355 ( 9.02)
0.060 ( 1.52)
MAX
0.430 ( 10.92)
MAX
0.014 ( 0.36)
0.010 ( 0.25)
0.008 ( 0.20)
0.325 ( 8.26)
0.310 ( 7.87)
0.300 ( 7.62)
0.195 ( 4.95)
0.130 ( 3.30)
0.115 (2.92)
0.015 ( 0.38)
GAUGE
PLANE
0.005 ( 0.13)
MIN
AD829 Data Sheet
Rev. I | Page 18 of 20
Figure 51. 8-Lead Ceramic Dual In-Line [CERDIP]
(Q-8)
Dimensions shown in inches and (millimeters)
Figure 52. 20-Terminal Ceramic Leadless Chip Carrier [LCC]
(E-20-1)
Dimensions shown in inches and (millimeters)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
0.310 (7.87)
0.220 (5.59)
0.005 (0.13)
MIN 0.055 (1.40)
MAX
0.100 (2.54) BSC
15°
0.320 (8.13)
0.290 (7.37)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
0.200 (5.08)
MAX
0.405 (10.29) MAX
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36) 0.070 (1.78)
0.030 (0.76)
0.060 (1.52)
0.015 (0.38)
14
5
8
CONTROLLING DIMENSIONS ARE IN INCHES; MILL I MET ER DIMENSIONS
(IN PARENTHESES) ARE RO UNDE D- OF F I NCH E QUI VALENTS FOR
REF E RE NCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
1
20 4
9
8
13
19
14
3
18
BOTTOM
VIEW
0.028 ( 0.71)
0.022 ( 0.56)
45° TYP
0.015 ( 0.38)
MIN
0.055 ( 1.40)
0.045 ( 1.14)
0.050 ( 1.27)
BSC
0.075 ( 1.91)
REF
0.011 ( 0.28)
0.007 ( 0.18)
R TYP
0.095 ( 2.41)
0.075 ( 1.90)
0.100 ( 2.54) REF
0.200 ( 5.08)
REF
0.150 ( 3.81)
BSC
0.075 ( 1.91)
REF
0.358 ( 9.09)
0.342 ( 8.69)
SQ
0.358
(9.09)
MAX
SQ
0.100 ( 2.54)
0.064 ( 1.63)
0.088 ( 2.24)
0.054 ( 1.37)
022106-A
Data Sheet AD829
Rev. I | Page 19 of 20
ORDERING GUIDE
Model
1
Temperature Range
Package Description
Package Option
AD829AR −40°C to +125°C 8-Lead SOIC_N R-8
AD829AR-REEL
−40°C to +125°C
8-Lead SOIC_N
R-8
AD829AR-REEL7 −40°C to +125°C 8-Lead SOIC_N R-8
AD829ARZ
−40°C to +125°C 8-Lead SOIC_N R-8
AD829ARZ-REEL
−40°C to +125°C 8-Lead SOIC_N R-8
AD829ARZ-REEL7
−40°C to +125°C 8-Lead SOIC_N R-8
AD829JN C to 70°C 8-Lead PDIP N-8
AD829JNZ C to 70°C 8-Lead PDIP N-8
AD829JR C to 70°C 8-Lead SOIC_N R-8
AD829JR-REEL C to 70°C 8-Lead SOIC_N R-8
AD829JR-REEL7 C to 70°C 8-Lead SOIC_N R-8
AD829JRZ C to 70°C 8-Lead SOIC_N R-8
AD829JRZ-REEL
C to 70°C
8-Lead SOIC_N
R-8
AD829JRZ-REEL7 C to 70°C 8-Lead SOIC_N R-8
AD829AQ −40°C to +125°C 8-Lead CERDIP Q-8
AD829SQ 55°C to +125°C 8-Lead CERDIP Q-8
AD829SQ/883B −55°C to +125°C 8-Lead CERDIP Q-8
5962-9312901MPA −55°C to +125°C 8-Lead CERDIP Q-8
AD829SE/883B −55°C to +125°C 20-Lead LCC E-20-1
5962-9312901M2A −55°C to +125°C 20-Lead LCC E-20-1
AD829JCHIPS Die
AD829SCHIPS Die
AD829AR-EBZ Evaluation Board
1 Z = RoHS Compliant Part.
AD829 Data Sheet
Rev. I | Page 20 of 20
NOTES
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00880-0-10/11(I)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
AD829AR-EBZ