T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 1 of 8
2N60 51 an d 2N6 05 2
Available PNP Darlington Power S ilicon Transistor
Qualified per MIL-PRF-19500/501
Quali f i ed Lev els:
JAN , JANTX, and
JANTXV
DESCRIPTION
This high speed PNP tran sis tor is rat ed at 12 amp s and is military q ualified u p to a JANTXV
level. This TO-204AA is olated pack age features a 180 degree lead orientation.
TO-204AA (TO-3)
Package
Important: For the latest infor mation, v isit our website http://www.microsemi.com.
FEATURES
• JEDEC registered 2N6051 and 2N6052
• JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/501
• RoHS compliant versions available (com mercial grade only)
APPLICATIONS / BENE FITS
• Milita ry , space and oth er high re liability applications
• High frequency response
• TO-204AA case with isolated terminals
MAXIMUM RATINGS @ TC = +25 oC unless otherwise noted
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-55 to +175
oC
Thermal Resistance Junction-to-Case
RӨJC
1.0
oC/W
Collector Current
IC
-12
A
Collector-Emitter Voltage 2N6051
2N6052
VCEO -80
-100
V
Collector-Base Voltage 2N6051
2N6052
VCBO -80
-100
V
Emitter-Base Voltage
VEBO
-5
V
Total Power Dissipation @ TC = +25
o
C
(1)
@ TC = +100
o
C
PT 150
75
W
Notes: 1. Derate linearly 1.0 W/oC above TC > +25 oC.
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 2 of 8
2N60 51 an d 2N6 05 2
M ECHANICAL and PACKAGING
• CASE: Indus try standard TO-204AA (TO-3), hermetically sealed, 0.040 inch diameter pins
• FINISH: Solder dipped tin-lead over nickel plated alloy 52 or RoHS compliant matte-tin plating. Solderable per MIL-STD-750
method 2026.
• POLARITY: PNP (see schematic)
• MOUNTING HARDWARE: Consult factory for optional insulator and sheet metal screws
• WEIGHT: Approximately 15 grams
• See package dimensions on last page.
PART NOMENCLATURE
JAN 2N6051 (e3)
JAN = JA N Level
JANTX = JANTX Level
JANTXV = JANTXV Level
Blank = Commercial
JEDEC type number
(see Electrical Charac teristics
RoHS Compliance
e3 = RoHS Compliant (available
on commercial grade only)
Blank = non-RoHS Compliant
SYMBOL S & DEFI NITIONS
Symbol
Definition
IB
Base cur rent: The value of the dc current into the base terminal.
IC
Collector current: The value of the dc current into the collector terminal.
IE
Emitter current: The value of the dc current into the em itter terminal.
TC
Cas e temp er ature: Th e temperature meas ured at a specifi ed location on the case of a de vice.
VCB
Collector-base voltage: The dc voltage between the collector and the base.
VCBO
Collector-base voltage, base open: The vol tage between the collec tor and base term inals when the emitter terminal is
open-circuited.
VCC
Collector-suppl y voltage: The supply voltage applied to a circuit connected to the collector.
VCE
Collector-emitter voltage: The dc voltage between the collector and the emitter.
VCEO Collector-emitter vol tage, base open: The voltage between the collector and the emitter ter minal s when the base
terminal is open-circuited.
VEB
Emitter-base voltage: The dc voltage between the emitter and the base
VEBO Emitter-base voltage, collector open: The voltage between the emi tter and base terminals with the collector terminal
open-circuited.
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 3 of 8
2N60 51 an d 2N6 05 2
ELECTRI CAL CHARACTERISTICS @ TA = +25 oC un less otherwise noted
Characteristics Symbol Min. Max. Unit
OFF CHARACTERISTICS
Collector-Emit ter Breakdown Voltage
IC = -10 0 m A
2N6051
2N6052
V(BR)CEO
-80
-100
V
Collector-E mitter Cutoff Cur rent
VCE = -40 V
VCE = -50 V
2N6051
2N6052
ICEO
-1.0
-1.0
mA
Collector-Emit ter Cut off Current
VCE = -80 V, VBE = 1. 5 V
VCE = -100 V, VBE = 1. 5 V
2N6051
2N6052 ICEX
-0.01
-0.01
mA
Emitter-Base C utoff Current
VBE = -5.0 V
IEBO
-2.0 mA
ON CHARACTERISTICS
Forward-Current Transfer Ratio
IC = -1.0 A, VCE = 3.0 V
IC = -6.0 A, VCE = 3.0 V
IC = -12 A, VCE = 3.0 V
hFE
1,000
1,000
150
18,000
Collector-Emitter Saturation Voltage
IC = -12 A, IB = -120 mA
IC = -6.0 A, IB = -24 mA
VCE(sat)
-3.0
-2.0
V
Base-Emi tt er Satu r ation V oltage
IC = -12 A, IB = -120 mA
VBE(sat)
-4.0
V
Base-Emi tt er Voltag e Non-saturated
VCE = -3.0 V, IC = -6 A
VBE -2.8 V
DYNAMIC CHARACTERISTICS
Common Emit ter Small -Signal S hort-Circuit
Forward Current Tran sfer Rati o
I
C
= -5 A, V
CE
= -3.0 V, f = 1 kHz
h
fe
1,000
Magn itude of Common Emitter Small-Signal Short -Circuit
Forward Cur r ent Tran sfer Rati o
IC = -5 A, VCE = -3.0 V, f = 1 MHz
|h
fe
|
10
250
O utput Capac itance
VCB = 10 V, IE = 0, f = 100 kHz ≤ f ≤ 1 MHz
Cobo
300
pF
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 4 of 8
2N60 51 an d 2N6 05 2
ELECTRI CAL CHARACTERISTICS @ TC = 25 oC unles s otherwise noted. (c ont inued)
SWITCHING CHARACTERISTICS
Turn-On Ti me
VCC = -30 V, IC = -5 A; IB1= -20 mA
ton
2.0
µs
Turn-Off Time
VCC = -30 V, IC = -5 A; IB1= IB2 = -20 mA
toff
10
µs
SAFE OPERATING AREA (See Figures 1 and 2 and MIL-STD-750,Test Method 3053)
DC Te sts
TC = +25 °C, +10 ºC, -0 ºC, t ≥ 1 second, 1 Cycle
Test 1
VCE = -12.5 V, IC = -12 A
Test 2
VCE = -30 V , IC = -5 A
Test 3
VCE = -70 V, IC = -200 mA (2N6051)
VCE = -90 V, IC = -155 mA (2N6052)
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 5 of 8
2N60 51 an d 2N6 05 2
SAFE OPERATING AREA
VCE – C ollector t o Emitter Volatge (Volt s)
FIGURE 1
Maximum Safe Operating Area
(continuous dc)
IC = Collector Current (Amperes)
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 6 of 8
2N60 51 an d 2N6 05 2
SAFE OPERATING AREA (continued)
L – Induc tance (Millihenries )
FIGURE 2
S afe Op er ating Area for Switching Between Satu r ation and Cutoff
(unclamped inductive load).
IC = Collector Current (Amperes)
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 7 of 8
2N60 51 an d 2N6 05 2
PACKAGE D IMENSIONS
NOTES: 1. Dimensions are in inches. Millimeters are given for information only.
2. Millimeters are given for information only.
3. Body contour is optional within zone defined by CD.
4. These dim ensions shall be measured at points .050 inch (1.27 mm) to .055 inch (1.40 mm) below seating plane. Wh en
gauge is not used, measurement shall be made at seating plane.
5. Both terminals.
6. At both ends.
7. Two holes.
8. The collector shall be electrically connected to the case.
9. LD applies between L1 and LL. Lead diameter shall not exceed tw ice LD within L1.
10. The s eating plane of the header shall be flat within .001 inch (0.03 mm), concave to .004 inch (0.10 mm), convex inside a
.930 inch (23.62 mm) diameter circle on the center of the header, and flat within .001 inch (0 .03 mm) concave to .006 inch
(0.15 mm), convex overall .
11. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.
Dimensions
Ltr
Inches
Millimeters
Notes
Min
Max
Min
Max
CD
-
0.875
-
22.23
3
CH
0.250
0.328
6.35
8.33
HR
0.495
0.525
12.57
13.34
HR1
0.131
0.188
3.33
4.78
6
HT
0.060
0.135
1.52
3.43
LD
0.038
0.043
0.97
1.09
4, 5, 9
LL
0.312
0.500
7.92
12.70
4, 5, 9
LL1
-
0.050
-
1.27
5, 9
MHD
0.151
0.161
3.84
4.09
7
MHS
1.177
1.197
29.90
30.40
PS
0.420
0.440
10.67
11.18
PS1
0.205
0.225
5.21
5.72
5
S1
0.655
0.675
16.64
17.15
T4-LDS-0306, Rev. 1 (9/6/13) ©2013 Microsemi Corporation Page 8 of 8
2N60 51 an d 2N6 05 2
SCHEMATIC