D-subminiature Metal Shell Solder Cup Basic D Series Ordering Information Solder Cup Sockets Zinc-Plated Shell with Yellow Chromate Finish Stamped Contact with Gold Flash in Solder Cup Mounting Holes 4-40 Clinch Nuts Positions Gold Flash 30in. Gold Gold Flash 30in. Gold 9 DE-9S DE-9S-30 DEE-9S DEE-9S-30 15 DA-15S DA-15S-30 DAE-15S DAE-15S-30 25 DB-25S DB-25S-30 DBE-25S DBE-25S-30 37 DC-37S DC-37S-30 DCE-37S DCE-37S-30 50 DD-50S DD-50S-30 DDE-50S DDE-50S-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9S DEY-9S-30 DAY-15S DAY-15S-30 DBY-25S DBY-25S-30 DCY-37S DCY-37S-30 DDY-50S DDY-50S-30 Stamped Contact Tin/Lead in Solder Cup Mounting Holes Positions Gold Flash 30in. Gold 9 DE-9S-II DE-9S-II-30 15 DA-15S-II DA-15S-II-30 25 DB-25S-II DB-25S-II-30 37 DC-37S-II DC-37S-II-30 50 DD-50S-II DD-50S-II-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9S-II DEE-9S-II-30 DAE-15S-II DAE-15S-II-30 DBE-25S-II DBE-25S-II-30 DCE-37S-II DCE-37S-II-30 DDE-50S-II DDE-50S-II-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9S-II DEY-9S-II-30 DAY-15S-II DAY-15S-II-30 DBY-25S-II DBY-25S-II-30 DCY-37S-II DCY-37S-II-30 DDY-50S-II DDY-50S-II-30 Screw Machine Contact Mounting Positions Gold Flash 9 DE-9S-SM 15 DA-15S-SM 25 DB-25S-SM 37 DC-37S-SM 50 DD-50S-SM 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9S-SM DEE-9S-SM-30 DAE-15S-SM DAE-15S-SM-30 DBE-25S-SM DBE-25S-SM-30 DCE-37S-SM DCE-37S-SM-30 DDE-50S-SM DDE-50S-SM-30 Holes 30in. Gold DE-9S-SM-30 DA-15S-SM-30 DB-25S-SM-30 DC-37S-SM-30 DD-50S-SM-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9S-SM DEY-9S-SM-30 DAY-15S-SM DAY-15S-SM-30 DBY-25S-SM DBY-25S-SM-30 DCY-37S-SM DCY-37S-SM-30 DDY-50S-SM DDY-50S-SM-30 Tin-Plated Shell Stamped Contact with Gold Flash in Solder Cup Mounting Holes 4-40 Clinch Nuts Positions Gold Flash 30in. Gold Gold Flash 30in. Gold 9 DE-9ST DE-9ST-30 DEE-9ST DEE-9ST-30 15 DA-15ST DA-15ST-30 DAE-15ST DAE-15ST-30 25 DB-25ST DB-25ST-30 DBE-25ST DBE-25ST-30 37 DC-37ST DC-37ST-30 DCE-37ST DCE-37ST-30 50 DD-50ST DD-50ST-30 DDE-50ST DDE-50ST-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9ST DEY-9ST-30 DAY-15ST DAY-15ST-30 DBY-25ST DBY-25ST-30 DCY-37ST DCY-37ST-30 DDY-50ST DDY-50ST-30 Stamped Contact with Tin/Lead in Solder Cup Mounting Holes 4-40 Clinch Nuts Positions Gold Flash 30in. Gold Gold Flash 30in. Gold 9 DE-9ST-II DE-9ST-II-30 DEE-9ST-II DEE-9ST-II-30 15 DA-15ST-II DA-15ST-II-30 DAE-15ST-II DAE-15ST-II-30 25 DB-25ST-II DB-25ST-II-30 DBE-25ST-II DBE-25ST-II-30 37 DC-37ST-II DC-37ST-II-30 DCE-37ST-II DCE-37ST-II-30 50 DD-50ST-II DD-50ST-II-30 DDE-50ST-II DDE-50ST-II-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9ST-II DEY-9ST-II-30 DAY-15ST-II DAY-15ST-II-30 DBY-25ST-II DBY-25ST-II-30 DCY-37ST-II DCY-37ST-II-30 DDY-50ST-II DDY-50ST-II-30 Screw Machine Contact Mounting Positions Gold Flash 9 DE-9ST-SM 15 DA-15ST-SM 25 DB-25ST-SM 37 DC-37ST-SM 50 DD-50ST-SM Dual Float Bushings Gold Flash 30in. Gold DEY-9ST-SM DEY-9ST-SM-30 DAY-15ST-SM DAY-15ST-SM-30 DBY-25ST-SM DBY-25ST-SM-30 DCY-37ST-SM DCY-37ST-SM-30 DDY-50ST-SM DDY-50ST-SM-30 Holes 30in. Gold DE-9ST-SM-30 DA-15ST-SM-30 DB-25ST-SM-30 DC-37ST-SM-30 DD-50ST-SM-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9ST-SM DEE-9ST-SM-30 DAE-15ST-SM DAE-15ST-SM-30 DBE-25ST-SM DBE-25ST-SM-30 DCE-37ST-SM DCE-37ST-SM-30 DDE-50ST-SM DDE-50ST-SM-30 4-43 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Metal Shell Vertical Dip Solder PCB Basic D Series * .040" contact diameter. * Short rear insulator provides low profile on PCB. * Offered with .120 mounting holes, dual float bushings, or optional 4-40 clinch nuts. Materials * Contact Material: Socket - Phosphor bronze (machined), Plug - Brass (machined). * Contact Plating: Gold flash or 30in. gold over nickel. .130 (3.30) .104 (2.64) .042 (1.07) .038 (0.97) .200 (5.08) REF. Ordering Information Vertical PCB Plugs 4 Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes Positions Gold Flash 30in. Gold 9 DE-9PV DE-9PV-30 15 DA-15PV DA-15PV-30 25 DB-25PV DB-25PV-30 37 DC-37PV DC-37PV-30 50 DD-50PV DD-50PV-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9PV DEE-9PV-30 DAE-15PV DAE-15PV-30 DBE-25PV DBE-25PV-30 DCE-37PV DCE-37PV-30 DDE-50PV DDE-50PV-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9PV DEY-9PV-30 DAY-15PV DAY-15PV-30 DBY-25PV DBY-25PV-30 DCY-37PV DCY-37PV-30 DCY-50PV DDY-50PV-30 Tin-Plated Shell with Grounding Indents Mounting Holes Positions Gold Flash 30in. Gold 9 DE-9PVTI DE-9PVTI-30 15 DA-15PVTI DA-15PVTI-30 25 DB-25PVTI DB-25PVTI-30 37 DC-37PVTI DC-37PVTI-30 50 DD-50PVTI DD-50PVTI-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9PVTI DEE-9PVTI-30 DAE-15PVTI DAE-15PVTI-30 DBE-25PVTI DBE-25PVTI-30 DCE-37PVTI DCE-37PVTI-30 DDE-50PVTI DDE-50PVTI-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9PVTI DEY-9PVTI-30 DAY-15PVTI DAY-15PVTI-30 DBY-25PVTI DBY-25PVTI-30 DCY-37PVTI DCY-37PVTI-30 DCY-50PVTI DDY-50PVTI-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9SV DEE-9SV-30 DAE-15SV DAE-15SV-30 DBE-25SV DBE-25SV-30 DCE-37SV DCE-37SV-30 DDE-50SV DDE-50SV-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9SV DEY-9SV-30 DAY-15SV DAY-15SV-30 DBY-25SV DBY-25SV-30 DCY-37SV DCY-37SV-30 DCY-50SV DDY-50SV-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9SVT DEE-9SVT-30 DAE-15SVT DAE-15SVT-30 DBE-25SVT DBE-25SVT-30 DCE-37SVT DCE-37SVT-30 DDE-50SVT DDE-50SVT-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9SVT DEY-9SVT-30 DAY-15SVT DAY-15SVT-30 DBY-25SVT DBY-25SVT-30 DCY-37SVT DCY-37SVT-30 DDY-50SVT DDY-50SVT-30 Vertical PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes Positions Gold Flash 30in. Gold 9 DE-9SV DE-9SV-30 15 DA-15SV DA-15SV-30 25 DB-25SV DB-25SV-30 37 DC-37SV DC-37SV-30 50 DD-50SV DD-50SV-30 Tin-Plated Shell Positions 9 15 25 37 50 Mounting Gold Flash DE-9SVT DA-15SVT DB-25SVT DC-37SVT DD-50SVT Holes 30in. Gold DE-9SVT-30 DA-15SVT-30 DB-25SVT-30 DC-37SVT-30 DD-50SVT-30 Call Toll Free: 1 (800) 323-9612 4-44 D-subminiature Metal Shell Wire Wrap Basic D Series * Reliable wire wrap termination. * Two contact lengths: .375" or .585". * .025" square contact tails. Materials * Contact Material: Copper alloy (machined). * Contact Plating: Gold flash or 30in. gold. All over nickel. .375 (9.53) or .585 (14.86) .200 (5.08) REF. Ordering Information 4 Wire Wrap Plugs .375" Tail Length Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9P-F179 DE-9P-F179-30 DA-15P-F179 DA-15P-F179-30 DB-25P-F179 DB-25P-F179-30 DC-37P-F179 DC-37P-F179-30 DD-50P-F179 DD-50P-F179-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9P-F179 DEE-9P-F179-30 DAE-15P-F179 DAE-15P-F179-30 DBE-25P-F179 DBE-25P-F179-30 DCE-37P-F179 DCE-37P-F179-30 DDE-50P-F179 DDE-50P-F179-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9P-F179 DEY-9P-F179-30 DAY-15P-F179 DAY-15P-F179-30 DBY-25P-F179 DBY-25P-F179-30 DCY-37P-F179 DCY-37P-F179-30 DDY-50P-F179 DDY-50P-F179-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9PTI-F179 DEE-9PTI-F179-30 DAE-15PTI-F179 DAE-15PTI-F179-30 DBE-25PTI-F179 DBE-25PTI-F179-30 DCE-37PTI-F179 DCE-37PTI-F179-30 DDE-50PTI-F179 DDE-50PTI-F179-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9PTI-F179 DEY-9PTI-F179-30 DAY-15PTI-F179 DAY-15PTI-F179-30 DBY-25PTI-F179 DBY-25PTI-F179-30 DCY-37PTI-F179 DCY-37PTI-F179-30 DDY-50PTI-F179 DDY-50PTI-F179-30 Tin-Plated Shell with Grounding Indents Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9PTI-F179 DE-9PTI-F179-30 DA-15PTI-F179 DA-15PTI-F179-30 DB-25PTI-F179 DB-25PTI-F179-30 DC-37PTI-F179 DC-37PTI-F179-30 DD-50PTI-F179 DD-50PTI-F179-30 4-45 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell Wire Wrap Basic D Series Ordering Information Wire Wrap Plugs (Cont'd) .585" Tail Length Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9P-F179C DE-9P-F179C-30 DA-15P-F179C DA-15P-F179C-30 DB-25P-F179C DB-25P-F179C-30 DC-37P-F179C DC-37P-F179C-30 DD-50P-F179C DD-50P-F179C-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9P-F179C DEE-9PF-179C-30 DAE-15P-F179C DAE-15PF-179C-30 DBE-25P-F179C DBE-25PF-179C-30 DCE-37P-F179C DCE-37PF-179C-30 DDE-50P-F179C DDE-50PF-179C-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9P-F179C DEY-9P-F179C-30 DAY-15P-F179C DAY-15P-F179C-30 DBY-25P-F179C DBY-25P-F179C-30 DCY-37P-F179C DCY-37P-F179C-30 DDY-50P-F179C DDY-50P-F179C-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9PTI-F179C DEE-9PTI-F179C-30 DAE-15PTI-F179C DAE-15PTI-F179C-30 DBE-25PTI-F179C DBE-25PTI-F179C-30 DCE-37PTI-F179C DCE-37PTI-F179C-30 DDE-50PTI-F179C DDE-50PTI-F179C-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9PTI-F179C DEY-9PTI-F179C-30 DAY-15PTI-F179C DAY-15PTI-F179C-30 DBY-25PTI-F179C DBY-25PTI-F179C-30 DCY-37PTI-F179C DCY-37PTI-F179C-30 DDY-50PTI-F179C DDY-50PTI-F179C-30 Tin-Plated Shell with Grounding Indents Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9PTI-F179C DE-9PTI-F179C-30 DA-15PTI-F179C DA-15PTI-F179C-30 DB-25PTI-F179C DB-25PTI-F179C-30 DC-37PTI-F179C DC-37PTI-F179C-30 DD-50PTI-F179C DD-50PTI-F179C-30 4 Call Toll Free: 1 (800) 323-9612 4-46 D-subminiature Metal Shell Wire Wrap Basic D Series Ordering Information Wire Wrap Sockets .375" Tail Length Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9S-F179 DA-15S-F179 DB-25S-F179 DC-37S-F179 DD-50S-F179 DE-9S-F179-30 DA-15S-F179-30 DB-25S-F179-30 DC-37S-F179-30 DD-50S-F179-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9S-F179 DAE-15S-F179 DBE-25S-F179 DCE-37S-F179 DDE-50S-F179 Dual Float Bushings Gold Flash 30in. Gold DEE-9S-F179-30 DAE-15S-F179-30 DBE-25S-F179-30 DCE-37S-F179-30 DDE-50S-F179-30 DEY-9S-F179 DAY-15S-F179 DBY-25S-F179 DCY-37S-F179 DDY-50S-F179 DEY-9S-F179-30 DAY-15S-F179-30 DBY-25S-F179-30 DCY-37S-F179-30 DDY-50S-F179-30 Tin-Plated Shell Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9ST-F179 DA-15ST-F179 DB-25ST-F179 DC-37ST-F179 DD-50ST-F179 DE-9ST-F179-30 DA-15ST-F179-30 DB-25ST-F179-30 DC-37ST-F179-30 DD-50ST-F179-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9ST-F179 DAE-15ST-F179 DBE-25ST-F179 DCE-37ST-F179 DDE-50ST-F179 Dual Float Bushings Gold Flash 30in. Gold DEE-9ST-F179-30 DAE-15ST-F179-30 DBE-25ST-F179-30 DCE-37ST-F179-30 DDE-50ST-F179-30 DEY-9ST-F179 DAY-15ST-F179 DBY-25ST-F179 DCY-37ST-F179 DDY-50ST-F179 DEY-9ST-F179-30 DAY-15ST-F179-30 DBY-25ST-F179-30 DCY-37ST-F179-30 DDY-50ST-F179-30 .585" Tail Length Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9S-F179C DA-15S-F179C DB-25S-F179C DC-37S-F179C DD-50S-F179C DE-9S-F179C-30 DA-15S-F179C-30 DB-25S-F179C-30 DC-37S-F179C-30 DD-50S-F179C-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9S-F179C DAE-15S-F179C DBE-25S-F179C DCE-37S-F179C DDE-50S-F179C DEE-9S-F179C-30 DAE-15S-F179C-30 DBE-25S-F179C-30 DCE-37S-F179C-30 DDE-50S-F179C-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9S-F179C DAY-15S-F179C DBY-25S-F179C DCY-37S-F179C DDY-50S-F179C DEY-9S-F179C-30 DAY-15S-F179C-30 DBY-25S-F179C-30 DCY-37S-F179C-30 DDY-50S-F179C-30 Tin-Plated Shell Positions 9 15 25 37 50 Mounting Holes Gold Flash 30in. Gold DE-9ST-F179C DA-15ST-F179C DB-25ST-F179C DC-37ST-F179C DD-50ST-F179C DE-9ST-F179C-30 DA-15ST-F179C-30 DB-25ST-F179C-30 DC-37ST-F179C-30 DD-50ST-F179C-30 4-40 Clinch Nuts Gold Flash 30in. Gold DEE-9ST-F179C DAE-15ST-F179C DBE-25ST-F179C DCE-37ST-F179C DDE-50ST-F179C 4-47 DEE-9ST-F179C-30 DAE-15ST-F179C-30 DBE-25ST-F179C-30 DCE-37ST-F179C-30 DDE-50ST-F179C-30 Dual Float Bushings Gold Flash 30in. Gold DEY-9ST-F179C DAY-15ST-F179C DBY-25ST-F179C DCY-37ST-F179C DDY-50ST-F179C DEY-9ST-F179C-30 DAY-15ST-F179C-30 DBY-25ST-F179C-30 DCY-37ST-F179C-30 DDY-50ST-F179C-30 Call Toll Free: 1 (800) 323-9612 4 Insulator Material: Glass-filled diallyl phthalate (green) UL 94V-0 rated Connector Shell: Steel with zinc plating and yellow chromate finish or tin plating (grounding indents on plug) Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) Contact Plating: 30in. gold over nickel 4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish Dual Float Bushing: Stainless steel, passivated Operating Temperature: -65C to + 125C Shock: 50G peak per MIL-STD-202, Method 213, Condition G Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-STD-202, Method 204, Condition D Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 MECHANICAL ELECTRICAL MATERIALS Available in vertical and right-angle dip solder PCB connectors and solder cup version for wire termination. Commercial version of M24308 military connectors with tin-plated or zinc-plated shell and 30in. gold plating. Monoblock green diallyl phthalate insulator for improved electrical performance. Machined contacts for precision performance. Offered in 9, 15, 25, 37, and 50 (except right-angle version) position plugs and sockets. Offered with .120 mounting holes, 4-40 clinch nuts (except right-angle version), or dual float bushings (except right-angle version). Approvals: * UL Recognized - Files E170218 (UL1977)and E130965 (UL1863). * CSA Approved - File LR31996. See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. ENVIRONMENTAL FEATURES D-subminiature Metal Shell Solder Cup, Right-Angle, and Vertical PCB Series 1 - High Reliability Withstanding Voltage: Current Rating: Contact Resistance: Insulation Resistance: Minimum 1250V RMS @ sea level 5 Amps 2.7 milliohms maximum 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-48 D-subminiature Metal Shell Solder Cup Series 1 - High Reliability * Will accommodate up to 20 AWG wire. .390 (9.91) .200 (5.08) REF. Ordering Information Solder Cup Plugs Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings 9 DEM-9P DEME-9P DEMY-9P DEM-9PTI DEME-9PTI DEMY-9PTI 15 DAM-15P DAME-15P DAMY-15P DAM-15PTI DAME-15PTI DAMY-15PTI 25 DBM-25P DBME-25P DBMY-25P DBM-25PTI DBME-25PTI DBMY-25PTI 37 DCM-37P DCME-37P DCMY-37P DCM-37PTI DCME-37PTI DCMY-37PTI 50 DDM-50P DDME-50P DDMY-50P DDM-50PTI DDME-50PTI DDMY-50PTI Solder Cup Sockets Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings 9 DEM-9S DEME-9S DEMY-9S DEM-9ST DEME-9ST 15 DAM-15S DAME-15S DAMY-15S DAM-15ST DAME-15ST DAMY-15ST 25 DBM-25S DBME-25S DBMY-25S DBM-25ST DBME-25ST DBMY-25ST 37 DCM-37S DCME-37S DCMY-37S DCM-37ST DCME-37ST DCMY-37ST 50 DDM-50S DDME-50S DDMY-50S DDM-50ST DDME-50ST DDMY-50ST 4-49 DEMY-9ST Call Toll Free: 1 (800) 323-9612 4 D-subminiature Metal Shell Right-Angle Dip Solder PCB Series 1 - High Reliability * .283" footprint uses minimal board space. * Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). Materials * 4 Mounting bracket: Black nylon. Can be removed if necessary. Ordering Information Right-Angle PCB Plugs Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 .125 Tail Length .030 Contact Diameter DEM-9PD DAM-15PD DBM-25PD DCM-37PD .158 Tail Length .030 Contact Diameter DEM-9PL DAM-15PL DBM-25PL DCM-37PL .185 Tail Length .030 Contact Diameter DEM-9PS DAM-15PS DBM-25PS DCM-37PS .125 Tail Length .040 Contact Diameter DEM-9PA DAM-15PA DBM-25PA DCM-37PA .158 Tail Length .040 Contact Diameter DEM-9PG DAM-15PG DBM-25PG DCM-37PG .185 Tail Length .040 Contact Diameter DEM-9PW DAM-15PW DBM-25PW DCM-37PW .185 Tail Length .030 Contact Diameter DEM-9PSTI DAM-15PSTI DBM-25PSTI DCM-37PSTI .125 Tail Length .040 Contact Diameter DEM-9PATI DAM-15PATI DBM-25PATI DCM-37PATI .158 Tail Length .040 Contact Diameter DEM-9PGTI DAM-15PGTI DBM-25PGTI DCM-37PGTI .185 Tail Length .040 Contact Diameter DEM-9PWTI DAM-15PWTI DBM-25PWTI DCM-37PWTI Tin-Plated Shell with Grounding Indents Positions 9 15 25 37 .125 Tail Length .030 Contact Diameter DEM-9PDTI DAM-15PDTI DBM-25PDTI DCM-37PDTI .158 Tail Length .030 Contact Diameter DEM-9PLTI DAM-15PLTI DBM-25PLTI DCM-37PLTI Call Toll Free: 1 (800) 323-9612 4-50 D-subminiature Metal Shell Right-Angle Dip Solder PCB Series 1 - High Reliability Ordering Information Right-Angle PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 .125 Tail Length .030 Contact Diameter DEM-9SD DAM-15SD DBM-25SD DCM-37SD .158 Tail Length .030 Contact Diameter DEM-9SL DAM-15SL DBM-25SL DCM-37SL .185 Tail Length .030 Contact Diameter DEM-9SS DAM-15SS DBM-25SS DCM-37SS .125 Tail Length .040 Contact Diameter DEM-9SA DAM-15SA DBM-25SA DCM-37SA .158 Tail Length .040 Contact Diameter DEM-9SG DAM-15SG DBM-25SG DCM-37SG .185 Tail Length .040 Contact Diameter DEM-9SW DAM-15SW DBM-25SW DCM-37SW .158 Tail Length .030 Contact Diameter DEM-9SLT DAM-15SLT DBM-25SLT DCM-37SLT .185 Tail Length .030 Contact Diameter DEM-9SST DAM-15SST DBM-25SST DCM-37SST .125 Tail Length .040 Contact Diameter DEM-9SAT DAM-15SAT DBM-25SAT DCM-37SAT .158 Tail Length .040 Contact Diameter DEM-9SGT DAM-15SGT DBM-25SGT DCM-37SGT .185 Tail Length .040 Contact Diameter DEM-9SWT DAM-15SWT DBM-25SWT DCM-37SWT Tin-Plated Shell Positions 9 15 25 37 .125 Tail Length .030 Contact Diameter DEM-9SDT DAM-15SDT DBM-25SDT DCM-37SDT 4 4-51 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell Vertical Dip Solder PCB Series 1 - High Reliability * Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). SEE CHART SEE CHART .200 REF. Ordering Information Vertical PCB Plugs Zinc-Plated Shell with Yellow Chromate Finish Positions 4 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEM-9PE DAM-15PE DBM-25PE DCM-37PE DDM-50PE .158 Tail Length .030 Contact Diameter DEM-9PM DAM-15PM DBM-25PM DCM-37PM DDM-50PM .185 Tail Length .030 Contact Diameter DEM-9PZ DAM-15PZ DBM-25PZ DCM-37PZ DDM-50PZ .125 Tail Length .040 Contact Diameter DEM-9PB DAM-15PB DBM-25PB DCM-37PB DDM-50PB .158 Tail Length .040 Contact Diameter DEM-9PH DAM-15PH DBM-25PH DCM-37PH DDM-50PH .185 Tail Length .040 Contact Diameter DEM-9PX DAM-15PX DBM-25PX DCM-37PX DDM-50PX .158 Tail Length .040 Contact Diameter DEME-9PH DAME-15PH DBME-25PH DCME-37PH DDME-50PH .185 Tail Length .040 Contact Diameter DEME-9PX DAME-15PX DBME-25PX DCME-37PX DDME-50PX .158 Tail Length .040 Contact Diameter DEMY-9PH DAMY-15PH DBMY-25PH DCMY-37PH DDMY-50PH .185 Tail Length .040 Contact Diameter DEMY-9PX DAMY-15PX DBMY-25PX DCMY-37PX DDMY-50PX Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEME-9PE DAME-15PE DBME-25PE DCME-37PE DDME-50PE .158 Tail Length .030 Contact Diameter DEME-9PM DAME-15PM DBME-25PM DCME-37PM DDME-50PM .185 Tail Length .030 Contact Diameter DEME-9PZ DAME-15PZ DBME-25PZ DCME-37PZ DDME-50PZ .125 Tail Length .040 Contact Diameter DEME-9PB DAME-15PB DBME-25PB DCME-37PB DDME-50PB Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEMY-9PE DAMY-15PE DBMY-25PE DCMY-37PE DDMY-50PE .158 Tail Length .030 Contact Diameter DEMY-9PM DAMY-15PM DBMY-25PM DCMY-37PM DDMY-50PM Call Toll Free: 1 (800) 323-9612 .185 Tail Length .030 Contact Diameter DEMY-9PZ DAMY-15PZ DBMY-25PZ DCMY-37PZ DDMY-50PZ .125 Tail Length .040 Contact Diameter DEMY-9PB DAMY-15PB DBMY-25PB DCMY-37PB DDMY-50PB 4-52 D-subminiature Metal Shell Vertical Dip Solder PCB Series 1 - High Reliability Ordering Information Vertical PCB Plugs (Cont'd) Tin-Plated Shell with Grounding Indents Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEM-9PETI DAM-15PETI DBM-25PETI DCM-37PETI DDM-50PETI .158 Tail Length .030 Contact Diameter DEM-9PMTI DAM-15PMTI DBM-25PMTI DCM-37PMTI DDM-50PMTI .185 Tail Length .030 Contact Diameter DEM-9PZTI DAM-15PZTI DBM-25PZTI DCM-37PZTI DDM-50PZTI .125 Tail Length .040 Contact Diameter DEM-9PBTI DAM-15PBTI DBM-25PBTI DCM-37PBTI DDM-50PBTI .158 Tail Length .040 Contact Diameter DEM-9PHTI DAM-15PHTI DBM-25PHTI DCM-37PHTI DDM-50PHTI .185 Tail Length .040 Contact Diameter DEM-9PXTI DAM-15PXTI DBM-25PXTI DCM-37PXTI DDM-50PXTI Tin-Plated Shell with Grounding Indents and 4-40 Clinch Nuts Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEME-9PETI DAME-15PETI DBME-25PETI DCME-37PETI DDME-50PETI .158 Tail Length .185 Tail Length .125 Tail Length .158 Tail Length .185 Tail Length .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter DEME-9PMTI DEME-9PZTI DEME-9PBTI DEME-9PHTI DEME-9PXTI DAME-15PMTI DAME-15PZTI DAME-15PBTI DAME-15PHTI DAME-15PXTI DBME-25PMTI DBME-25PZTI DBME-25PBTI DBME-25PHTI DBME-25PXTI DCME-37PMTI DCME-37PZTI DCME-37PBTI DCME-37PHTI DCME-37PXTI DDME-50PMTI DDME-50PZTI DDME-50PBTI DDME-50PHTI DDME-50PXTI Tin-Plated Shell with Grounding Indents and Dual Float Bushings Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEMY-9PETI DAMY-15PETI DBMY-25PETI DCMY-37PETI DDMY-50PETI .158 Tail Length .185 Tail Length .125 Tail Length .030 Contact .030 Contact .040 Contact Diameter Diameter Diameter DEMY-9PMTI DEMY-9PZTI DEMY-9PBTI DAMY-15PMTI DAMY-15PZTI DAMY-15PBTI DBMY-25PMTI DBMY-25PZTI DBMY-25PBTI DCMY-37PMTI DCMY-37PZTI DCMY-37PBTI DDMY-50PMTI DDMY-50PZTI DDMY-50PBTI .158 Tail Length .040 Contact Diameter DEMY-9PHTI DAMY-15PHTI DBMY-25PHTI DCMY-37PHTI DDMY-50PHTI .185 Tail Length .040 Contact Diameter DEMY-9PXTI DAMY-15PXTI DBMY-25PXTI DCMY-37PXTI DDMY-50PXTI .158 Tail Length .040 Contact Diameter DEM-9SH DAM-15SH DBM-25SH DCM-37SH DDM-50SH .185 Tail Length .040 Contact Diameter DEM-9SX DAM-15SX DBM-25SX DCM-37SX DDM-50SX Vertical PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEM-9SE DAM-15SE DBM-25SE DCM-37SE DDM-50SE .158 Tail Length .030 Contact Diameter DEM-9SM DAM-15SM DBM-25SM DCM-37SM DDM-50SM .185 Tail Length .030 Contact Diameter DEM-9SZ DAM-15SZ DBM-25SZ DCM-37SZ DDM-50SZ 4-53 .125 Tail Length .040 Contact Diameter DEM-9SB DAM-15SB DBM-25SB DCM-37SB DDM-50SB Call Toll Free: 1 (800) 323-9612 4 D-subminiature Metal Shell Vertical Dip Solder PCB Series 1 - High Reliability Ordering Information Vertical PCB Sockets (Cont'd) Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEME-9SE DAME-15SE DBME-25SE DCME-37SE DDME-50SE .158 Tail Length .030 Contact Diameter DEME-9SM DAME-15SM DBME-25SM DCME-37SM DDME-50SM .185 Tail Length .030 Contact Diameter DEME-9SZ DAME-15SZ DBME-25SZ DCME-37SZ DDME-50SZ .125 Tail Length .040 Contact Diameter DEME-9SB DAME-15SB DBME-25SB DCME-37SB DDME-50SB .158 Tail Length .040 Contact Diameter DEME-9SH DAME-15SH DBME-25SH DCME-37SH DDME-50SH .185 Tail Length .040 Contact Diameter DEME-9SX DAME-15SX DBME-25SX DCME-37SX DDME-50SX Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings Positions 9 15 25 37 50 4 .125 Tail Length .030 Contact Diameter DEMY-9SE DAMY-15SE DBMY-25SE DCMY-37SE DDMY-50SE .158 Tail Length .030 Contact Diameter DEMY-9SM DAMY-15SM DBMY-25SM DCMY-37SM DDMY-50SM .185 Tail Length .030 Contact Diameter DEMY-9SZ DAMY-15SZ DBMY-25SZ DCMY-37SZ DDMY-50SZ .125 Tail Length .040 Contact Diameter DEMY-9SB DAMY-15SB DBMY-25SB DCMY-37SB DDMY-50SB .158 Tail Length .040 Contact Diameter DEMY-9SH DAMY-15SH DBMY-25SH DCMY-37SH DDMY-50SH .185 Tail Length .040 Contact Diameter DEMY-9SX DAMY-15SX DBMY-25SX DCMY-37SX DDMY-50SX .158 Tail Length .030 Contact Diameter DEM-9SMT DAM-15SMT DBM-25SMT DCM-37SMT DDM-50SMT .185 Tail Length .030 Contact Diameter DEM-9SZT DAM-15SZT DBM-25SZT DCM-37SZT DDM-50SZT .125 Tail Length .040 Contact Diameter DEM-9SBT DAM-15SBT DBM-25SBT DCM-37SBT DDM-50SBT .158 Tail Length .040 Contact Diameter DEM-9SHT DAM-15SHT DBM-25SHT DCM-37SHT DDM-50SHT .185 Tail Length .040 Contact Diameter DEM-9SXT DAM-15SXT DBM-25SXT DCM-37SXT DDM-50SXT .185 Tail Length .030 Contact Diameter DEME-9SZT DAME-15SZT DBME-25SZT DCME-37SZT DDME-50SZT .125 Tail Length .040 Contact Diameter DEME-9SBT DAME-15SBT DBME-25SBT DCME-37SBT DDME-50SBT .158 Tail Length .040 Contact Diameter DEME-9SHT DAME-15SHT DBME-25SHT DCME-37SHT DDME-50SHT .185 Tail Length .040 Contact Diameter DEME-9SXT DAME-15SXT DBME-25SXT DCME-37SXT DDME-50SXT .185 Tail Length .030 Contact Diameter DEMY-9SZT DAMY-15SZT DBMY-25SZT DCMY-37SZT DDMY-50SZT .125 Tail Length .040 Contact Diameter DEMY-9SBT DAMY-15SBT DBMY-25SBT DCMY-37SBT DDMY-50SBT .158 Tail Length .040 Contact Diameter DEMY-9SHT DAMY-15SHT DBMY-25SHT DCMY-37SHT DDMY-50SHT .185 Tail Length .040 Contact Diameter DEMY-9SXT DAMY-15SXT DBMY-25SXT DCMY-37SXT DDMY-50SXT Tin-Plated Shell Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEM-9SET DAM-15SET DBM-25SET DCM-37SET DDM-50SET Tin-Plated Shell with 4-40 Clinch Nuts Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEME-9SET DAME-15SET DBME-25SET DCME-37SET DDME-50SET .158 Tail Length .030 Contact Diameter DEME-9SMT DAME-15SMT DBME-25SMT DCME-37SMT DDME-50SMT Tin-Plated Shell with Dual Float Bushings Positions 9 15 25 37 50 .125 Tail Length .030 Contact Diameter DEMY-9SET DAMY-15SET DBMY-25SET DCMY-37SET DDMY-50SET .158 Tail Length .030 Contact Diameter DEMY-9SMT DAMY-15SMT DBMY-25SMT DCMY-37SMT DDMY-50SMT Call Toll Free: 1 (800) 323-9612 4-54 D-subminiature Metal Shell - Combination Layout Solder Cup and Vertical PCB Series 1 - High Reliability * * * Shell Sizes (equivalent to standard size): E (Size 9), A (Size 15 ), B (Size 25 ), C (Size 25 ), and D (Size 25 ). Offered in a variety of combination layouts in vertical style for PCB mount or solder cup style for wire termination. Signal Contacts (Size 20) are fixed and non-removable. - * * * Vertical Dip Solder Contacts are available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). Removable Coaxial, High Power, High Voltage contacts must be ordered separately. See Series 1 page 4-48 for specifications. Available with 30in. or 50in. gold contact plating. Materials Connector Shell: * Steel with zinc or cadmium plating and yellow chromate finish or tin plating (grounding indents on plug). 4 4-55 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell - Combination Layout Series 1 - High Reliability Combination Layouts Shell Size Contact Arrangement Signal Contacts Coax Cavities Shell Size Contact Arrangement Signal Contacts Coax Cavities 4 E 5W1 4 1 A 3W3 0 1 B 9W4 5 4 A 7W2 5 1 A 11W1 10 1 B 13W3 10 3 B 17W2 15 2 B 21W1 20 1 Shell Size Contact Arrangement Signal Contacts Coax Cavities C C C 13W6 7 5 8W8 0 8 17W5 12 5 Shell Size Contact Arrangement Signal Contacts Coax Cavities C C C 21WA-4 17 4 25W3 22 3 27W2 25 2 Shell Size Contact Arrangement Signal Contacts Coax Cavities D 24W7 25 2 D 36W4 32 4 D 43W2 41 2 NOTE: Mating face of plug is shown, socket is mirror image. Position numbers are for male only. Call Toll Free: 1 (800) 323-9612 4-56 D-subminiature Metal Shell - Combination Layout Solder Cup Series 1 - High Reliability * Will accommodate up to 20 AWG wire. Ordering Information Combo D-sub Solder Cup Plugs 30in. Gold Plating Shell Zinc-Plated Shell with Yellow Chromate Finish Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings E DEM-XXWX*P DEME XXWX*P DEMY-XXWX*P A DAM-XXWX*P DAME-XXWX*P DAMY-XXWX*P B DBM-XXWX*P DBME-XXWX*P DBMY-XXWX*P C DCM-XXWX*P DCME-XXWX*P DCMY-XXWX*P D DDM-XXWX*P DDME-XXWX*P DDMY-XXWX*P Tin-Plated Shell with Grounding Indents Mounting Holes 4-40 Clinch Nuts Dual Float Bushings DEM-XXWX*PTI DEME-XXWX*PTI DEMY-XXWX*PTI DAM-XXWX*PTI DAME-XXWX*PTI DAMY-XXWX*PTI DBM-XXWX*PTI DBME-XXWX*PTI DBMY-XXWX*PTI DCM-XXWX*PTI DCME-XXWX*PTI DCMY-XXWX*PTI DDM-XXWX*PTI DDME-XXWX*PTI DDMY-XXWX*PTI Combo D-sub Solder Cup Sockets 30in. Gold Plating Shell Zinc-Plated Shell with Yellow Chromate Finish Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings E DEM-XXWX*S DEME-XXWX*S DEMY-XXWX*S A DAM-XXWX*S DAME-XXWX*S DAMY-XXWX*S B DBM-XXWX*S DBME-XXWX*S DBMY-XXWX*S C DCM-XXWX*S DCME-XXWX*S DCMY-XXWX*S D DDM-XXWX*S DDME-XXWX*S DDMY-XXWX*S Mounting Holes DEM-XXWX*ST DAM-XXWX*ST DBM-XXWX*ST DCM-XXWX*ST DDM-XXWX*ST Tin-Plated Shell 4-40 Clinch Nuts Dual Float Bushings DEME-XXWX*ST DEMY-XXWX*ST DAME-XXWX*ST DAMY-XXWX*ST DBME-XXWX*ST DBMY-XXWX*ST DCME-XXWX*ST DCMY-XXWX*ST DDME-XXWX*ST DDMY-XXWX*ST Mounting Holes DEMM-XXWX*S DAMM-XXWX*S DBMM-XXWX*S DCMM-XXWX*S DDMM-XXWX*S Sockets 4-40 Clinch Nuts DEMME-XXWX*S DAMME-XXWX*S DBMME-XXWX*S DCMME-XXWX*S DDMME-XXWX*S Combo D-sub Solder Cup Plugs and Sockets 50in. Gold Plating Cadmium-Plated Shell with Yellow Chromate Finish Shell Size Mounting Holes E DEMM-XXWX*P A DAMM-XXWX*P B DBMM-XXWX*P C DCMM-XXWX*P D DDMM-XXWX*P Plugs 4-40 Clinch Nuts Dual Float Bushings DEMME-XXWX*P DEMMY-XXWX*P DAMME-XXWX*P DAMMY-XXWX*P DBMME-XXWX*P DBMMY-XXWX*P DCMME-XXWX*P DCMMY-XXWX*P DDMME-XXWX*P DDMMY-XXWX*P Dual Float Bushings DEMMY-XXWX*S DAMMY-XXWX*S DBMMY-XXWX*S DCMMY-XXWX*S DDMMY-XXWX*S *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 4-57 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Metal Shell - Combination Layout Vertical PCB Dip Solder Tails Series 1 - High Reliability Ordering Information Combo D-sub Vertical PCB Plugs 30in. Gold Plating Zinc-Plated Shell with Yellow Chromate Finish and Mounting Holes .125 Tail Length .158 Tail Length .185 Tail Length .125 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEM-XXWX*PH DAM-XXWX*PH DBM-XXWX*PH DCM-XXWX*PH DDM-XXWX*PH DEM-XXWX*PX DAM-XXWX*PX DBM-XXWX*PX DCM-XXWX*PX DDM-XXWX*PX .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEME-XXWX*PB DAME-XXWX*PB DBME-XXWX*PB DCME-XXWX*PB DDME-XXWX*PB DEME-XXWX*PH DAME-XXWX*PH DBME-XXWX*PH DCME-XXWX*PH DDME-XXWX*PH DEME-XXWX*PX DAME-XXWX*PX DBME-XXWX*PX DCME-XXWX*PX DDME-XXWX*PX Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings .125 Tail Length .158 Tail Length .185 Tail Length .125 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMY-XXWX*PB DAMY-XXWX*PB DBMY-XXWX*PB DCMY-XXWX*PB DDMY-XXWX*PB DEMY-XXWX*PH DAMY-XXWX*PH DBMY-XXWX*PH DCMY-XXWX*PH DDMY-XXWX*PH DEMY-XXWX*PX DAMY-XXWX*PX DBMY-XXWX*PX DCMY-XXWX*PX DDMY-XXWX*PX Tin-Plated Shell with Grounding Indents and Mounting Holes .125 Tail Length .158 Tail Length .185 Tail Length .125 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEM-XXWX*PHTI DAM-XXWX*PHTI DBM-XXWX*PHTI DCM-XXWX*PHTI DDM-XXWX*PHTI DEM-XXWX*PXTI DAM-XXWX*PXTI DBM-XXWX*PXTI DCM-XXWX*PXTI DDM-XXWX*PXTI E A B C D 4 DEM-XXWX*PE DAM-XXWX*PE DBM-XXWX*PE DCM-XXWX*PE DDM-XXWX*PE DEM-XXWX*PM DAM-XXWX*PM DBM-XXWX*PM DCM-XXWX*PM DDM-XXWX*PM DEM-XXWX*PZ DAM-XXWX*PZ DBM-XXWX*PZ DCM-XXWX*PZ DDM-XXWX*PZ DEM-XXWX*PB DAM-XXWX*PB DBM-XXWX*PB DCM-XXWX*PB DDM-XXWX*PB Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts .125 Tail Length .158 Tail Length .185 Tail Length .125 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter E A B C D E A B C D E A B C D DEME-XXWX*PE DAME-XXWX*PE DBME-XXWX*PE DCME-XXWX*PE DDME-XXWX*PE DEMY-XXWX*PE DAMY-XXWX*PE DBMY-XXWX*PE DCMY-XXWX*PE DDMY-XXWX*PE DEM-XXWX*PETI DAM-XXWX*PETI DBM-XXWX*PETI DCM-XXWX*PETI DDM-XXWX*PETI DEME-XXWX*PM DAME-XXWX*PM DBME-XXWX*PM DCME-XXWX*PM DDME-XXWX*PM DEMY-XXWX*PM DAMY-XXWX*PM DBMY-XXWX*PM DCMY-XXWX*PM DDMY-XXWX*PM DEM-XXWX*PMTI DAM-XXWX*PMTI DBM-XXWX*PMTI DCM-XXWX*PMTI DDM-XXWX*PMTI DEME-XXWX*PZ DAME-XXWX*PZ DBME-XXWX*PZ DCME-XXWX*PZ DDME-XXWX*PZ DEMY-XXWX*PZ DAMY-XXWX*PZ DBMY-XXWX*PZ DCMY-XXWX*PZ DDMY-XXWX*PZ DEM-XXWX*PZTI DAM-XXWX*PZTI DBM-XXWX*PZTI DCM-XXWX*PZTI DDM-XXWX*PZTI DEM-XXWX*PBTI DAM-XXWX*PBTI DBM-XXWX*PBTI DCM-XXWX*PBTI DDM-XXWX*PBTI * Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. Call Toll Free: 1 (800) 323-9612 4-58 D-subminiature Metal Shell - Combination Layout Vertical PCB Dip Solder Tails Series 1 - High Reliability Ordering Information Combo D-sub Vertical PCB Plugs 30in. Gold Plating (Cont'd) Tin-Plated Shell with Grounding Indents and 4-40 Clinch Nuts Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter E A B C D DEME-XXWX*PETI DAME-XXWX*PETI DBME-XXWX*PETI DCME-XXWX*PETI DDME-XXWX*PETI DEME-XXWX*PMTI DAME-XXWX*PMTI DBME-XXWX*PMTI DCME-XXWX*PMTI DDME-XXWX*PMTI .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEME-XXWX*PZTI DAME-XXWX*PZTI DBME-XXWX*PZTI DCME-XXWX*PZTI DDME-XXWX*PZTI DEME-XXWX*PBTI DAME-XXWX*PBTI DBME-XXWX*PBTI DCME-XXWX*PBTI DDME-XXWX*PBTI DEME-XXWX*PHTI DAME-XXWX*PHTI DBME-XXWX*PHTI DCME-XXWX*PHTI DDME-XXWX*PHTI DEME-XXWX*PXTI DAME-XXWX*PXTI DBME-XXWX*PXTI DCME-XXWX*PXTI DDME-XXWX*PXTI Tin-Plated Shell with Grounding Indents and Dual Float Bushings Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter E A B C D DEMY-XXWX*PETI DAMY-XXWX*PETI DBMY-XXWX*PETI DCMY-XXWX*PETI DDMY-XXWX*PETI DEMY-XXWX*PMTI DAMY-XXWX*PMTI DBMY-XXWX*PMTI DCMY-XXWX*PMTI DDMY-XXWX*PMTI DEMY-XXWX*PZTI DAMY-XXWX*PZTI DBMY-XXWX*PZTI DCMY-XXWX*PZTI DDMY-XXWX*PZTI DEMY-XXWX*PBTI DAMY-XXWX*PBTI DBMY-XXWX*PBTI DCMY-XXWX*PBTI DDMY-XXWX*PBTI DEMY-XXWX*PHTI DAMY-XXWX*PHTI DBMY-XXWX*PHTI DCMY-XXWX*PHTI DDMY-XXWX*PHTI DEMY-XXWX*PXTI DAMY-XXWX*PXTI DBMY-XXWX*PXTI DCMY-XXWX*PXTI DDMY-XXWX*PXTI 50in. Gold Plating Cadmium-Plated Shell with Yellow Chromate Finish and Mounting Holes Shell Size E A B C D .125 Tail Length .030 Contact Diameter DEMM-XXWX*PE DAMM-XXWX*PE DBMM-XXWX*PE DCMM-XXWX*PE DDMM-XXWX*PE .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMM-XXWX*PM DAMM-XXWX*PM DBMM-XXWX*PM DCMM-XXWX*PM DDMM-XXWX*PM DEMM-XXWX*PZ DAMM-XXWX*PZ DBMM-XXWX*PZ DCMM-XXWX*PZ DDMM-XXWX*PZ DEMM-XXWX*PB DAMM-XXWX*PB DBMM-XXWX*PB DCMM-XXWX*PB DDMM-XXWX*PB DEMM-XXWX*PH DAMM-XXWX*PH DBMM-XXWX*PH DCMM-XXWX*PH DDMM-XXWX*PH DEMM-XXWX*PX DAMM-XXWX*PX DBMM-XXWX*PX DCMM-XXWX*PX DDMM-XXWX*PX Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter E A B C D DEMME-XXWX*PE DAMME-XXWX*PE DBMME-XXWX*PE DCMME-XXWX*PE DDMME-XXWX*PE DEMME-XXWX*PM DAMME-XXWX*PM DBMME-XXWX*PM DCMME-XXWX*PM DDMME-XXWX*PM .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMME-XXWX*PZ DAMME-XXWX*PZ DBMME-XXWX*PZ DCMME-XXWX*PZ DDMME-XXWX*PZ DEMME-XXWX*PB DAMME-XXWX*PB DBMME-XXWX*PB DCMME-XXWX*PB DDMME-XXWX*PB DEMME-XXWX*PH DAMME-XXWX*PH DBMME-XXWX*PH DCMME-XXWX*PH DDMME-XXWX*PH DEMME-XXWX*PX DAMME-XXWX*PX DBMME-XXWX*PX DCMME-XXWX*PX DDMME-XXWX*PX Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter E A B C D DEMMY-XXWX*PE DAMMY-XXWX*PE DBMMY-XXWX*PE DCMMY-XXWX*PE DDMMY-XXWX*PE DEMMY-XXWX*PM DAMMY-XXWX*PM DBMMY-XXWX*PM DCMMY-XXWX*PM DDMMY-XXWX*PM DEMMY-XXWX*PZ DAMMY-XXWX*PZ DBMMY-XXWX*PZ DCMMY-XXWX*PZ DDMMY-XXWX*PZ DEMMY-XXWX*PB DAMMY-XXWX*PB DBMMY-XXWX*PB DCMMY-XXWX*PB DDMMY-XXWX*PB DEMMY-XXWX*PH DAMMY-XXWX*PH DBMMY-XXWX*PH DCMMY-XXWX*PH DDMMY-XXWX*PH DEMMY-XXWX*PX DAMMY-XXWX*PX DBMMY-XXWX*PX DCMMY-XXWX*PX DDMMY-XXWX*PX *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 4-59 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Metal Shell - Combination Layout Vertical PCB Mount Dip Solder Tails Series 1 High Reliability Ordering Information Combo D-sub Vertical PCB Sockets 30in. Gold Plating Zinc-Plated Shell with Yellow Chromate Finish and Mounting Holes Shell Size E A B C D .125 Tail Length .030 Contact Diameter DEM-XXWX*SE DAM-XXWX*SE DBM-XXWX*SE DCM-XXWX*SE DDM-XXWX*SE .158 Tail Length .030 Contact Diameter DEM-XXWX*SM DAM-XXWX*SM DBM-XXWX*SM DCM-XXWX*SM DDM-XXWX*SM .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEM-XXWX*SZ DAM-XXWX*SZ DBM-XXWX*SZ DCM-XXWX*SZ DDM-XXWX*SZ DEM-XXWX*SB DAM-XXWX*SB DBM-XXWX*SB DCM-XXWX*SB DDM-XXWX*SB DEM-XXWX*SH DAM-XXWX*SH DBM-XXWX*SH DCM-XXWX*SH DDM-XXWX*SH DEM-XXWX*SX DAM-XXWX*SX DBM-XXWX*SX DCM-XXWX*SX DDM-XXWX*SX Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts Shell Size E A B C D 4 .125 Tail Length .030 Contact Diameter DEME-XXWX*SE DAME-XXWX*SE DBME-XXWX*SE DCME-XXWX*SE DDME-XXWX*SE .158 Tail Length .030 Contact Diameter DEME-XXWX*SM DAME-XXWX*SM DBME-XXWX*SM DCME-XXWX*SM DDME-XXWX*SM .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEME-XXWX*SZ DAME-XXWX*SZ DBME-XXWX*SZ DCME-XXWX*SZ DDME-XXWX*SZ DEME-XXWX*SB DAME-XXWX*SB DBME-XXWX*SB DCME-XXWX*SB DDME-XXWX*SB DEME-XXWX*SH DAME-XXWX*SH DBME-XXWX*SH DCME-XXWX*SH DDME-XXWX*SH DEME-XXWX*SX DAME-XXWX*SX DBME-XXWX*SX DCME-XXWX*SX DDME-XXWX*SX Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings Shell Size E A B C D .125 Tail Length .030 Contact Diameter DEMY-XXWX*SE DAMY-XXWX*SE DBMY-XXWX*SE DCMY-XXWX*SE DDMY-XXWX*SE .158 Tail Length .030 Contact Diameter DEMY-XXWX*SM DAMY-XXWX*SM DBMY-XXWX*SM DCMY-XXWX*SM DDMY-XXWX*SM .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMY-XXWX*SZ DAMY-XXWX*SZ DBMY-XXWX*SZ DCMY-XXWX*SZ DDMY-XXWX*SZ DEMY-XXWX*SB DAMY-XXWX*SB DBMY-XXWX*SB DCMY-XXWX*SB DDMY-XXWX*SB DEMY-XXWX*SH DAMY-XXWX*SH DBMY-XXWX*SH DCMY-XXWX*SH DDMY-XXWX*SH DEMY-XXWX*SX DAMY-XXWX*SX DBMY-XXWX*SX DCMY-XXWX*SX DDMY-XXWX*SX .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEM-XXWX*SZT DAM-XXWX*SZT DBM-XXWX*SZT DCM-XXWX*SZT DDM-XXWX*SZT DEM-XXWX*SBT DAM-XXWX*SBT DBM-XXWX*SBT DCM-XXWX*SBT DDM-XXWX*SBT DEM-XXWX*SHT DAM-XXWX*SHT DBM-XXWX*SHT DCM-XXWX*SHT DDM-XXWX*SHT DEM-XXWX*SXT DAM-XXWX*SXT DBM-XXWX*SXT DCM-XXWX*SXT DDM-XXWX*SXT Tin-Plated Shell with Mounting Holes Shell Size E A B C D .125 Tail Length .030 Contact Diameter DEM-XXWX*SET DAM-XXWX*SET DBM-XXWX*SET DCM-XXWX*SET DDM-XXWX*SET .158 Tail Length .030 Contact Diameter DEM-XXWX*SMT DAM-XXWX*SMT DBM-XXWX*SMT DCM-XXWX*SMT DDM-XXWX*SMT * Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. Call Toll Free: 1 (800) 323-9612 4-60 D-subminiature Metal Shell - Combination Layout Vertical PCB Mount Dip Solder Tails Series 1 - High Reliability Ordering Information Combo D-sub Vertical PCB Sockets (Cont'd) 30in. Gold Plating (Cont'd) Tin-Plated Shell with 4-40 Clinch Nuts Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter E A B C D DEME-XXWX*SET DAME-XXWX*SET DBME-XXWX*SET DCME-XXWX*SET DDME-XXWX*SET DEME-XXWX*SMT DAME-XXWX*SMT DBME-XXWX*SMT DCME-XXWX*SMT DDME-XXWX*SMT DEME-XXWX*SZT DAME-XXWX*SZT DBME-XXWX*SZT DCME-XXWX*SZT DDME-XXWX*SZT DEME-XXWX*SBT DAME-XXWX*SBT DBME-XXWX*SBT DCME-XXWX*SBT DDME-XXWX*SBT DEME-XXWX*SHT DAME-XXWX*SHT DBME-XXWX*SHT DCME-XXWX*SHT DDME-XXWX*SHT DEME-XXWX*SXT DAME-XXWX*SXT DBME-XXWX*SXT DCME-XXWX*SXT DDME-XXWX*SXT Tin-Plated Shell and Dual Float Bushings Shell Size E A B C D .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMY-XXWX*SET DAMY-XXWX*SET DBMY-XXWX*SET DCMY-XXWX*SET DDMY-XXWX*SET DEMY-XXWX*SMT DAMY-XXWX*SMT DBMY-XXWX*SMT DCMY-XXWX*SMT DDMY-XXWX*SMT DEMY-XXWX*SZT DAMY-XXWX*SZT DBMY-XXWX*SZT DCMY-XXWX*SZT DDMY-XXWX*SZT DEMY-XXWX*SBT DAMY-XXWX*SBT DBMY-XXWX*SBT DCMY-XXWX*SBT DDMY-XXWX*SBT DEMY-XXWX*SHT DAMY-XXWX*SHT DBMY-XXWX*SHT DCMY-XXWX*SHT DDMY-XXWX*SHT DEMY-XXWX*SXT DAMY-XXWX*SXT DBMY-XXWX*SXT DCMY-XXWX*SXT DDMY-XXWX*SXT 50in. Gold Plating Cadmium-Plated Shell with Yellow Chromate Finish and Mounting Holes Shell Size E A B C D .125 Tail Length .030 Contact Diameter DEMM-XXWX*SE DAMM-XXWX*SE DBMM-XXWX*SE DCMM-XXWX*SE DDMM-XXWX*SE .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMM-XXWX*SM DAMM-XXWX*SM DBMM-XXWX*SM DCMM-XXWX*SM DDMM-XXWX*SM DEMM-XXWX*SZ DAMM-XXWX*SZ DBMM-XXWX*SZ DCMM-XXWX*SZ DDMM-XXWX*SZ DEMM-XXWX*SB DAMM-XXWX*SB DBMM-XXWX*PB DCMM-XXWX*SB DDMM-XXWX*SB DEMM-XXWX*SH DAMM-XXWX*SH DBMM-XXWX*SH DCMM-XXWX*SH DDMM-XXWX*SH DEMM-XXWX*SX DAMM-XXWX*SX DBMM-XXWX*SX DCMM-XXWX*SX DDMM-XXWX*SX Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter E A B C D DEMME-XXWX*SE DAMME-XXWX*SE DBMME-XXWX*SE DCMME-XXWX*SE DDMME-XXWX*SE DEMME-XXWX*SM DAMME-XXWX*SM DBMME-XXWX*SM DCMME-XXWX*SM DDMME-XXWX*SM .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter DEMME-XXWX*SZ DAMME-XXWX*SZ DBMME-XXWX*SZ DCMME-XXWX*SZ DDMME-XXWX*SZ DEMME-XXWX*SB DAMME-XXWX*SB DBMME-XXWX*SB DCMME-XXWX*SB DDMME-XXWX*SB DEMME-XXWX*SH DAMME-XXWX*SH DBMME-XXWX*SH DCMME-XXWX*SH DDMME-XXWX*SH DEMME-XXWX*SX DAMME-XXWX*SX DBMME-XXWX*SX DCMME-XXWX*SX DDMME-XXWX*SX Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings Shell Size .125 Tail Length .030 Contact Diameter .158 Tail Length .030 Contact Diameter .185 Tail Length .030 Contact Diameter .125 Tail Length .040 Contact Diameter .158 Tail Length .040 Contact Diameter .185 Tail Length .040 Contact Diameter E A B C D DEMMY-XXWX*SE DAMMY-XXWX*SE DBMMY-XXWX*SE DCMMY-XXWX*SE DDMMY-XXWX*SE DEMMY-XXWX*SM DAMMY-XXWX*SM DBMMY-XXWX*SM DCMMY-XXWX*SM DDMMY-XXWX*SM DEMMY-XXWX*SZ DAMMY-XXWX*SZ DBMMY-XXWX*SZ DCMMY-XXWX*SZ DDMMY-XXWX*SZ DEMMY-XXWX*SB DAMMY-XXWX*SB DBMMY-XXWX*SB DCMMY-XXWX*SB DDMMY-XXWX*SB DEMMY-XXWX*SH DAMMY-XXWX*SH DBMMY-XXWX*SH DCMMY-XXWX*SH DDMMY-XXWX*SH DEMMY-XXWX*SX DAMMY-XXWX*SX DBMMY-XXWX*SX DCMMY-XXWX*SX DDMMY-XXWX*SX *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 4-61 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Contacts Coaxial - High Power - High Voltage and 75 ), High-Voltage, and High-Power styles. Available in Coaxial (50 FEATURES Cable termination and PCB mount contacts are available in right-angle and straight plugs and receptacles. Precision screw machine construction results in uniform contact impedance and excellent contact retention. Available with 30in. or 50in. gold contact plating. Cable braid can be soldered or crimped. See pages 4-55 thru 4-61 for Cinch combination layout D-subminiature connectors. Termination Tooling * * No tools are required for coaxial contact insertion. Contacts snap into connector. Coaxial and high-voltage contact extraction tool #CET-C6B for removing contacts after termination. See page 4-103. Tool to crimp sleeve over cable braid: Use 3-cavity die #CCD-26 with crimp frame #FCT-552. See page 4-103. NOTE: In order to determine which contact to use with a cable wire not specifically listed: * Check the style of contact required: straight or right-angle, solder braid or crimp braid, etc. * Refer to the cable wire manufacturer's specifications to determine: - The O.D. of the insulator. - The O.D. of the jacket. * Compare the above with the corresponding dimensions C and E in the straight contacts and dimensions B and C in the right-angle contacts. Call Toll Free: 1 (800) 323-9612 4-62 D-subminiature Contacts Coaxial - 50 Right-Angle and Straight Materials * * * Receptacle: Body - Beryllium copper, Insulator - Teflon, Contacts - Brass. Plug: Body - Brass, Insulator - Teflon, Contacts - Beryllium copper. Plating: 30in. gold over nickel, 50in. gold over copper. Electrical Characteristics Dielectric Withstanding Voltage: * * Cable Contacts: minimum AC 1000V RMS @ sea level. PCB Contacts: minimum AC 800V RMS @ sea level. Frequency Range: 0-900 MHz. Right-Angle Receptacle Plug Straight Receptacle Plug Ordering Information Right-Angle PCB Coaxial Contacts - 50 Plug Recept. 30in. Gold DM53761-30 DM53763-30 50in. Gold DM53761-50 DM53763-50 Straight PCB Coaxial Contacts - 50 Plug Recept. 4-63 30in. Gold DM53760-30 DM53762-30 50in. Gold DM53760-50 DM53762-50 Call Toll Free: 1 (800) 323-9612 D-subminiature Contacts Coaxial - 50 Straight * Material and electrical specifications: See page 4-63. Plug 4 Receptacle Ordering Information Straight Solder Braid Coaxial Contacts Plug Plug Plug Plug Recept. Recept. Recept. Recept. Plug Recept. 30in. Gold DM53740-5008 DM53740-5001 DM53740-5002 DM53740-5005 DM53742-5006 DM53742-5001 DM53742-5002 DM53742-5004 DM53740-5000 DM53742-5000 50in. Gold DM53740-5105 DM53740-5099 DM53740-5104 DM53740-5101 DM53742-5092 DM53742-5089 DM53742-5091 DM53742-5086 DM53740-5100 DM53742-5085 A in .739 .739 .847 .847 .739 .739 .847 .847 .670 .670 Max. mm 18.77 18.77 21.51 21.51 18.77 18.77 21.51 21.51 17.02 17.02 B Ref. in mm 0.929 23.60 0.929 23.60 1.037 26.34 1.037 26.34 0.929 23.60 0.929 23.60 1.037 26.34 1.037 26.34 0.860 21.84 0.860 21.84 in .093 .125 .202 .202 .093 .125 .202 .202 .093 .093 C B Ref. in mm .929 23.60 .929 23.60 1.037 26.34 1.037 26.34 .929 23.60 .929 23.60 1.037 1.037 E +.005" in mm .040 1.02 .067 1.70 .110 2.79 .125 3.18 .040 1.02 .067 1.70 .110 2.79 .125 3.18 .040 1.02 .040 1.02 RG Cable Old New 196/U 178B/U 187/U 179B/U 195/U 180B/U 58/U 58B/U 196/U 178B/U 187/U 179B/U 195/U 180B/U 58/U 58B/U 196/U 178B/U 196/U 178B/U mm 3.15 3.86 5.97 5.97 3.15 3.86 E +.005" in mm .040 1.02 .067 1.70 .110 2.79 .125 3.18 .040 1.02 .067 1.70 5.97 5.97 .110 .125 RG Cable Old New 196/U 178B/U 187/U 179B/U 195/U 180B/U 58/U 58B/U 196/U 178B/U 187/U, 179B/U, 188/U 316/BU 195/U 180B/U 58/U 58B/U D mm 2.36 3.18 5.13 5.13 2.36 3.18 5.13 5.13 2.36 2.36 in .124 .152 .235 .235 .124 .152 .235 .235 .124 .124 in .093 .125 .202 .202 .093 .125 mm 2.36 3.18 5.13 5.13 2.36 3.18 in .124 .152 .235 .235 .124 .152 .202 .202 5.13 5.13 .235 .235 mm 3.15 3.86 5.97 5.97 3.15 3.86 5.97 5.97 3.15 3.15 Straight Crimp Braid Coaxial Contacts Plug Plug Plug Plug Recept. Recept. 30in. Gold DM53740 DM53740-1 DM53740-3 DM53740-5 DM53742 DM53742-1 50in. Gold DM53740-17 DM53740-15 DM53740-16 DM53740-18 DM53742-18 DM53742-16 A in .739 .739 .847 .847 .739 .739 Max. mm 18.77 18.77 21.51 21.51 18.77 18.77 Recept. Recept. DM53742-3 DM53742-5 DM53742-17 DM53742-19 .847 .847 21.51 21.51 Call Toll Free: 1 (800) 323-9612 26.34 26.34 4-64 C D 2.79 3.18 D-subminiature Contacts Coaxial - 50 Right Angle * Material and electrical specifications: See page 4-63. Plug Receptacle Right-Angle Solder Braid Coaxial Contacts - 50 A 30in. Gold 50in. Gold in mm in B mm in C mm in D mm in E mm in F mm Old RG Cable New Plugs DM53741-5000 DM53741-5001 DM53741-5059 DM53741-5062 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .492 12.50 .492 12.50 .040 1.02 .067 1.70 .093 .125 2.36 3.18 .125 .152 3.18 3.86 RG 196/U RG 187/U DM53741-5003 DM53741-5004 DM53741-5063 DM53741-5060 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .601 15.27 .601 15.27 .110 2.79 .125 3.18 .202 .202 5.13 5.13 .235 .235 5.97 5.97 RG 195/U RG 196/U Receptacles DM53743-5000 DM53743-5001 DM53743-5073 DM53743-5076 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .492 12.50 .492 12.50 .040 1.02 .067 1.70 .093 .125 2.36 3.18 .125 .152 3.18 3.86 RG 196/U RG 187/U DM53743-5003 DM53743-5004 DM53743-5077 DM53743-5074 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .601 15.27 .601 15.27 .110 2.79 .125 3.18 .202 .202 5.13 5.13 .235 .235 5.97 5.97 RG 195/U RG 58/U D mm in mm in mm Old RG RG RG RG RG 178B/U 179B/U, 316B/U 180B/U 58B/U RG RG RG RG RG 178B/U 179B/U, 316B/U 180B/U 58B/U Right-Angle Crimp Braid Coaxial Contacts - 50 30in. Gold 50in. Gold in A mm in B mm Plugs DM53741-0 DM53741-1 DM53741-12 DM53741-11 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .492 12.50 .492 12.50 .040 1.02 .067 1.70 .093 .125 2.36 3.18 .125 .152 3.18 3.86 DM53741-3 DM53741-4 DM53741-10 DM53741-13 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .601 15.27 .601 15.27 .110 2.79 .125 3.18 .202 .202 5.13 5.13 .235 .235 5.97 5.97 Receptacles DM53743-2 DM53743-3 DM53743-18 DM53743-16 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .492 12.50 .492 12.50 .040 1.02 .067 1.70 .093 .125 2.36 3.18 .125 .152 3.18 3.86 DM53743-5 DM53743-6 DM53743-17 DM53743-19 .530 .530 13.46 13.46 .734 .734 18.64 18.64 .601 15.27 .601 15.27 .110 2.79 .125 3.18 .202 .202 5.13 5.13 .235 .235 5.97 5.97 in C mm 4-65 in E F RG Cable New RG RG RG RG RG 196/U 187/U 188/U 195/U 58/U RG RG RG RG RG 178B/U 179B/U, 316B/U 180B/U 58B/U RG RG RG RG RG 196/U 187/U 188/U 195/U 58/U RG RG RG RG RG 178B/U 179B/U, 316B/U 180B/U 58B/U Call Toll Free: 1 (800) 323-9612 4 D-subminiature Contacts Coaxial - 75 Straight Materials * * * Receptacle: Body - Brass or beryllium copper, Insulator - Teflon, Contacts - Brass. Plug: Body - Brass, Insulator - Teflon, Contacts - Beryllium copper. Plating: 30in. gold over nickel, 50in. gold over copper Electrical Characteristics Nominal Impedance: 75. Dielectric Withstanding Voltage: Minimum 1000V RMS @ sea level. VWSR: 1.05 max. for 0-1 GHz and 1.25 max for 1-2 GHz Receptacle Plug 150/.153 Dia. .187 Dia. Ref. .187 Dia. Ref. .201 Dia. Ref. .201 Dia. Ref. 4 Ordering Information Crimp/Solder Termination Straight Coaxial Contacts 75 Plug Plug Recept. Recept. Recept. Recept. 30in. Gold DM53750-12 DM53750-11 DM53752-8 DM53752-7 DM53752-6 DM53752-5 50in. Gold DM53750-52 DM53750-51 DM53752-58 DM53752-57 DM53752-56 DM53752-55 A in 1.037 0.929 1.037 0.929 1.037 0.929 B mm 26.34 23.60 26.34 23.60 26.34 23.60 in .108 .067 .108 .067 .108 .067 mm 2.74 1.70 2.74 1.70 2.74 1.70 Material Brass Brass Brass Brass Beryllium Copper Beryllium Copper Cable Belden 8218 RG 179 B/U Belden 8218 RG 179 B/U Belden 8218 RG 179 B/U mm 2.74 1.70 2.74 1.70 2.74 1.70 Material Brass Brass Brass Brass Beryllium Copper Beryllium Copper Cable Belden 8218 RG 179 B/U Belden 8218 RG 179 B/U Belden 8218 RG 179 B/U Crimp/Crimp Termination Straight Coaxial Contacts 75 Plug Plug Recept. Recept. Recept. Recept. 30in. Gold DM53750-010 DM53750-009 DM53752-004 DM53752-003 DM53752-002 DM53752-001 50in. Gold DM53750-510 DM53750-509 DM53752-504 DM53752-503 DM53752-502 DM53752-501 Call Toll Free: 1 (800) 323-9612 A in 1.050 1.050 1.090 1.090 1.090 1.090 B mm 26.67 26.67 27.69 27.69 27.69 27.69 4-66 in .108 .067 .108 .067 .108 .067 D-subminiature Contacts High Voltage Right-Angle and Straight Materials * * Contact: Body - Nylon per MIL-P-20693 Plating: 30in. gold over nickel, 50in. gold over copper Electrical Characteristics Dielectric Withstanding Voltage: Minimum AC 2800VAC RMS to shell @ sea level High-Voltage Contacts - For #20 AWG wire Right-Angle Straight Plug Plug Receptacle Receptacle 4 Ordering Information Straight High-Voltage Contacts - #20 AWG Wire Plug Recept. 30in. Gold DM51157-0 DM51155-0 50in. Gold DM51157-8 DM51155-7 A in mm .539 13.69 .539 13.69 B in mm .734 18.64 .734 18.64 Wire Size #20 #20 B in mm .697 17.70 .697 17.70 Wire Size #20 #20 Right-Angle High-Voltage Contacts - #20 AWG Wire Plug Recept. 30in. Gold 50in. Gold DM51157-5000 DM51157-5005 DM51155-5000 DM51155-5004 A in mm .491 12.47 .491 12.47 4-67 Call Toll Free: 1 (800) 323-9612 D-subminiature Contacts High-Power Straight * High-Power Contacts will accommodate up to 40 Amps current rating. Materials * Contact Plating: - 30in. gold over nickel - 50in. gold over copper * Receptacle: Beryllium copper * Plug: Brass Plug 4 Receptacle Ordering Information Straight High-Power Contacts A Plug Plug Plug Recept. Recept. Recept. 30in. Gold DM53745-1 DM53745-7 DM53745-8 DM53744-1 DM53744-6 DM53744-7 50in. Gold DM53745-28 DM53745-27 DM53745-25 DM53744-21 DM53744-25 DM53744-24 in .666 .666 .666 .666 .666 .666 Call Toll Free: 1 (800) 323-9612 mm 16.92 16.92 16.92 16.92 16.92 16.92 B in .866 .866 .866 .866 .866 .866 4-68 mm 22.00 22.00 22.00 22.00 22.00 22.00 C in .188 .112 .069 .188 .112 .069 mm 4.78 2.84 1.75 4.78 2.84 1.75 Current Rating (Amps) 40 20 10 40 20 10 Wire Size (AWG) #8 #12 #16 #8 #12 #16 Insulator Material: Glass fiber-filled diallyl phthalate (green), UL 94V-0 Connector Shell: Steel with zinc plating and yellow chromate finish Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) Contact Plating: 30in. gold over nickel 4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish Dual Float Bushing: Stainless steel, passivated Operating Temperature: -65C to + 125C Shock: 50G peak per MIL-STD-202, Method 213, Condition G Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-STD-202, Method 204, Condition D Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 MECHANICAL ELECTRICAL MATERIALS High-reliability in a commercial grade connector. Monoblock diallyl phthalate insulator for improved electrical performance. Offered in 9, 15, 25, 37, and 50 position plugs and sockets. Offered with .120 mounting holes, 4-40 clinch nuts, or dual float bushings. Commercial version of M24308 Military connectors with tin-plated or zinc-plated shell and 30in. gold contact plating. Screw Machine Crimp and Poke contacts available as follows: * Note that all contacts are packed loose. * Plating options: 30in. gold. * Can be included with the connector or purchased separately (FO part numbers). See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. ENVIRONMENTAL FEATURES D-subminiature Metal Shell Crimp and Poke Series 3 - High Reliability Withstanding Voltage: Current Rating: Contact Resistance: Insulation Resistance: Minimum 1250V RMS @ sea level 5 Amps 2.7 milliohms maximum 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-70 D-subminiature Metal Shell Crimp and Poke Series 3 - High Reliability .375 (9.53) max. Termination Tooling * * * Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 4-103. Crimp Contact Hand Tool: Military #M22520/2-01. See page 4-103. Contact Positioner (below) required. Positioner for machine contacts for Hand Tool #M22520/2-01 (locates contact in the correct position): #M22520/2-08. See page 4-103. Ordering Information Crimp and Poke - Plugs Zinc-Plated Shell with Yellow Chromate Finish Positions 9 15 25 37 50 Mounting Holes 30in. Gold Without Contacts Contacts DEMA-9P DEMA-9P-FO DAMA-15P DAMA-15P-FO DBMA-25P DBMA-25P-FO DCMA-37P DCMA-37P-FO DDMA-50P DDMA-50P-FO 4-40 Clinch Nuts 30in. Gold Without Contacts Contacts DEMAE-9P DEMAE-9P-FO DAMAE-15P DAMAE-15P-FO DBMAE-25P DBMAE-25P-FO DCMAE-37P DCMAE-37P-FO DDMAE-50P DDMAE-50P-FO Dual Float 30in. Gold Contacts DEMAY-9P DAMAY-15P DBMAY-25P DCMAY-37P DDMAY-50P Bushings Without Contacts DEMAY-9P-FO DAMAY-15P-FO DBMAY-25P-FO DCMAY-37P-FO DDMAY-50P-FO 4-40 Clinch Nuts 30in. Gold Without Contacts Contacts DEMAE-9PTI DEMAE-9PTI-FO DAMAE-15PTI DAMAE-15PTI-FO DBMAE-25PTI DBMAE-25PTI-FO DCMAE-37PTI DCMAE-37PTI-FO DDMAE-50PTI DDMAE-50PTI-FO Dual Float 30in. Gold Contacts DEMAY-9PTI DAMAY-15PTI DBMAY-25PTI DCMAY-37PTI DDMAY-50PTI Bushings Without Contacts DEMAY-9PTI-FO DAMAY-15PTI-FO DBMAY-25PTI-FO DCMAY-37PTI-FO DDMAY-50PTI-FO Tin-Plated Shells with Grounding Indents Positions 9 15 25 37 50 Mounting Holes 30in. Gold Without Contacts Contacts DEMA-9PTI DEMA-9PTI-FO DAMA-15PTI DAMA-15PTI-FO DBMA-25PTI DBMA-25PTI-FO DCMA-37PTI DCMA-37PTI-FO DDMA-50PTI DDMA-50PTI-FO 4-71 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell Crimp and Poke Series 3 - High Reliability Ordering Information Crimp and Poke - Sockets Zinc-Plated Shell with Yellow Chromate Finish Mounting Holes 30in. Gold Without Contacts Contacts DEMA-9S DEMA-9S-FO DAMA-15S DAMA-15S-FO DBMA-25S DBMA-25S-FO DCMA-37S DCMA-37S-FO DDMA-50S DDMA-50S-FO Positions 9 15 25 37 50 4-40 Clinch Nuts 30in. Gold Without Contacts Contacts DEMAE-9S DEMAE-9S-FO DAMAE-15S DAMAE-15S-FO DBMAE-25S DBMAE-25S-FO DCMAE-37S DCMAE-37S-FO DDMAE-50S DDMAE-50S-FO Dual Float 30in. Gold Contacts DEMAY-9S DAMAY-15S DBMAY-25S DCMAY-37S DDMAY-50S Bushings Without Contacts DEMAY-9S-FO DAMAY-15S-FO DBMAY-25S-FO DCMAY-37S-FO DDMAY-50S-FO 4-40 Clinch Nuts 30in. Gold Without Contacts Contacts DEMAE-9ST DEMAE-9ST-FO DAMAE-15ST DAMAE-15ST-FO DBMAE-25ST DBMAE-25ST-FO DCMAE-37ST DCMAE-37ST-FO DDMAE-50ST DDMAE-50ST-FO Dual Float 30in. Gold Contacts DEMAY-9ST DAMAY-15ST DBMAY-25ST DCMAY-37ST DDMAY-50ST Bushings Without Contacts DEMAY-9ST-FO DAMAY-15ST-FO DBMAY-25ST-FO DCMAY-37ST-FO DDMAY-50ST-FO Tin-Plated Shell Mounting Holes 30in. Gold Without Contacts Contacts DEMA-9ST DEMA-9ST-FO DAMA-15ST DAMA-15ST-FO DBMA-25ST DBMA-25ST-FO DCMA-37ST DCMA-37ST-FO DDMA-50ST DDMA-50ST-FO Positions 9 15 25 37 50 4 Crimp and Poke Machined Contacts * Will accommodate 20, 22, and 24 AWG wire. Ordering Information Contacts Description Pin Socket M39029/64-369 M39029/63-368 Call Toll Free: 1 (800) 323-9612 4-72 Meets all MIL-C-24308 Class G specifications. Offered in Crimp and Poke and Solder Cup and PCB vertical and right-angle. Offered in 9, 15, 25, 37, and 50 position plugs and sockets except right-angle (9 to 37 positions). Monoblock green diallyl phthalate insulator for improved electrical performance. See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. MATERIALS Insulator Material: Glass-filled diallyl phthalate (green) per MIL-M-14, Type SDG-F Connector Shell: Steel with cadmium plating and yellow chromate finish Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) Contact Plating: 50in. gold over copper or nickel Dual Float Bushing: Stainless steel, passivated or non-magnetic brass ENVIRONMENTAL FEATURES D-subminiature Metal Shell MIL-C-24308 M24308 Series Operating Temperature: -65C to + 125C Shock: 50G peak per MIL-STD-202, Method 213, Condition G Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-STD-202 Method 204, Condition D Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 ELECTRICAL Withstanding Voltage: Current Rating: Contact Resistance: Insulation Resistance: Minimum 1250V RMS @ sea level 5 Amps 2.7 milliohms maximum 5000 megohms maximum (initial); 1000 megohms (minimum) after MECHANICAL environmental testing Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 oz./12 oz. Durability: 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-74 D-subminiature Metal Shell MIL-C-24308 Crimp and Poke M24308 Series * * * Available with .120 mounting holes, float bushings, or dual float bushings. Order with contacts included or separately. Order with contact Insertion/Extraction Tool included or order tool #CIET-20-HD separately. See page 4-103. Ordering Information Crimp and Poke Plugs Steel Shell Contacts Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings 9 M24308/4-1F M24308/4-302F 15 M24308/4-2F M24308/4-303F 25 M24308/4-3F M24308/4-304F 37 M24308/4-4F M24308/4-305F 50 M24308/4-5F M24308/4-306F Dual Float Bushings M24308/4-435F M24308/4-436F M24308/4-437F M24308/4-438F M24308/4-439F Contacts Included. Insertion/Extraction Tool Included. Positions Mounting Holes Float Bushings 9 M24308/4-6F M24308/4-313F 15 M24308/4-7F M24308/4-314F 25 M24308/4-8F M24308/4-315F 37 M24308/4-9F M24308/4-316F 50 M24308/4-10F M24308/4-317F Dual Float Bushings M24308/4-446F M24308/4-447F M24308/4-448F M24308/4-449F M24308/4-450F Contacts Not Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/4-259F M24308/4-324F M24308/4-457F 15 M24308/4-260F M24308/4-325F M24308/4-458F 25 M24308/4-261F M24308/4-326F M24308/4-459F 37 M24308/4-262F M24308/4-327F M24308/4-460F 50 M24308/4-263F M24308/4-328F M24308/4-461F 4-75 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell MIL-C-24308 Crimp and Poke M24308 Series Ordering Information Crimp and Poke Sockets Steel Shell 4 Contacts Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings 9 M24308/2-1F M24308/2-23F 15 M24308/2-2F M24308/2-24F 25 M24308/2-3F M24308/2-25F 37 M24308/2-4F M24308/2-26F 50 M24308/2-5F M24308/2-27F Dual Float Bushings M24308/2-342F M24308/2-343F M24308/2-344F M24308/2-345F M24308/2-346F Contacts Included. Insertion/Extraction Tool Included. Positions Mounting Holes Float Bushings 9 M24308/2-6F M24308/2-34F 15 M24308/2-7F M24308/2-35F 25 M24308/2-8F M24308/2-36F 37 M24308/2-9F M24308/2-37F 50 M24308/2-10F M24308/2-38F Dual Float Bushings M24308/2-353F M24308/2-354F M24308/2-355F M24308/2-356F M24308/2-357F Contacts Not Included. Insertion/Extraction Tool Not Included. Positions Mounting Holes Float Bushings Dual Float Bushings 9 M24308/2-281F M24308/2-292F M24308/2-482F 15 M24308/2-282F M24308/2-293F M24308/2-483F 25 M24308/2-283F M24308/2-294F M24308/2-484F 37 M24308/2-284F M24308/2-295F M24308/2-485F 50 M24308/2-285F M24308/2-296F M24308/2-486F Call Toll Free: 1 (800) 323-9612 4-76 D-subminiature Metal Shell MIL-C-24308 Crimp and Poke M24308 Series Ordering Information Tooling * Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 4-103. * Wire termination hand tool: #M22520/2-01. See page 4-103. * Positioner for machine contacts for hand tool #M22520/2-08 (locates contact in the correct position). See page 4-103. Crimp and Poke Contacts Ordering Information * Will accommodate 20, 22, and 24 AWG wire. Description Pin Socket 4 M39029/64-369 M39029/63-368 4-77 Call Toll Free: 1 (800) 323-9612 D-subminiature Metal Shell MIL-C-24308 Solder Cup M24308 Series * * Available with .120" mounting holes, float bushings, or dual float bushings. Will accommodate up to 20 AWG wire. Ordering Information Solder Cup Plugs Steel Shell Positions 9 15 25 37 50 4 Mounting Holes M24308/3-1F M24308/3-2F M24308/3-3F M24308/3-4F M24308/3-5F Float Bushings M24308/3-12F M24308/3-13F M24308/3-14F M24308/3-15F M24308/3-16F Dual Float Bushings M24308/3-17F M24308/3-18F M24308/3-19F M24308/3-20F M24308/3-21F Brass Non-Magnetic Shell Positions Mounting Holes 9 M24308/7-1F 15 M24308/7-2F 25 M24308/7-3F 37 M24308/7-4F 50 M24308/7-5F Float Bushings M24308/7-12F M24308/7-13F M24308/7-14F M24308/7-15F M24308/7-16F Dual Float Bushings M24308/7-17F M24308/7-18F M24308/7-19F M24308/7-20F M24308/7-21F Mounting Holes M24308/1-1F M24308/1-2F M24308/1-3F M24308/1-4F M24308/1-5F Float Bushings M24308/1-12F M24308/1-13F M24308/1-14F M24308/1-15F M24308/1-16F Dual Float Bushings M24308/1-23F M24308/1-24F M24308/1-25F M24308/1-26F M24308/1-27F Brass Non-Magnetic Shell Positions Mounting Holes 9 M24308/5-1F 15 M24308/5-2F 25 M24308/5-3F 37 M24308/5-4F 50 M24308/5-5F Float Bushings M24308/5-12F M24308/5-13F M24308/5-14F M24308/5-15F M24308/5-16F Dual Float Bushings M24308/5-23F M24308/5-24F M24308/5-25F M24308/5-26F M24308/5-27F Solder Cup Sockets Steel Shell Positions 9 15 25 37 50 Call Toll Free: 1 (800) 323-9612 4-78 D-subminiature Metal Shell MIL-C-24308 PCB M24308 Series Right-Angle Right-Angle Connector 0.396 * * * * * .283" footprint requires minimal PCB space. 0.340 Available with three contact tail lengths (.127", .158", and .183") with .030" contact diameter. Available with two contact tail lengths (.127" and .183") with .040" contact diameter. Offered with .120" mounting holes. Mounting bracket: Black nylon. Can be removed if necessary. 0.283 See Chart 0.122 (2.84) Ordering Information Right-Angle PCB Plugs (Sockets not available) Steel Shell .127 Tail Length .158 Tail Length .183 Tail Length .127 Tail Length .183 Tail Length Positions .030 Contact Diameter .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter 9 M24308/24-25F M24308/24-31F M24308/24-49F M24308/24-37F M24308/24-55F 15 M24308/24-26F M24308/24-32F M24308/24-50F M24308/24-38F M24308/24-56F 25 M24308/24-27F M24308/24-33F M24308/24-51F M24308/24-39F M24308/24-57F 37 M24308/24-28F M24308/24-34F M24308/24-52F M24308/24-40F M24308/24-58F Vertical Vertical Connector * * 4 Available with two contact tail lengths (.158" and .183") and two contact diameters (.030" and .040"). Offered with .120" mounting holes. Ordering Information Vertical PCB Plugs Steel Shell .158 Tail Length .183 Tail Length .158 Tail Length .183 Tail Length Positions .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter 9 M24308/24-1F M24308/24-7F M24308/24-13F M24308/24-19F 15 M24308/24-2F M24308/24-8F M24308/24-14F M24308/24-20F 25 M24308/24-3F M24308/24-9F M24308/24-15F M24308/24-21F 37 M24308/24-4F M24308/24-10F M24308/24-16F M24308/24-22F 50 M24308/24-5F M24308/24-11F M24308/24-17F M24308/24-23F Vertical PCB Sockets Steel Shell .158 Tail Length .183 Tail Length .158 Tail Length .183 Tail Length Positions .030 Contact Diameter .030 Contact Diameter .040 Contact Diameter .040 Contact Diameter 9 M24308/23-1F M24308/23-7F M24308/23-13F M24308/23-19F 15 M24308/23-2F M24308/23-8F M24308/23-14F M24308/23-20F 25 M24308/23-3F M24308/23-9F M24308/23-15F M24308/23-21F 37 M24308/23-4F M24308/23-10F M24308/23-16F M24308/23-22F 50 M24308/23-5F M24308/23-11F M24308/23-17F M24308/23-23F 4-79 Call Toll Free: 1 (800) 323-9612 D-subminiature Backshells/Junction Shells/Hoods Accessories FEATURES Cinch backshells are offered in a variety of styles, each having a specific strength. * Backshells have two-piece construction and are frequently used where appearance is a major factor. RFI/EMI shielding capability is also an option: - Plastic Backshells: No shielding. - Metallized Plastic: Economical method of shielding. - Diecast Backshells: Maximum shielding. * Cinch SDH Series backshells utilize Cinch's Latch-N-LockTM system with quick release disconnect. Just squeeze the latch levers to release the connector. Also available with standard 4-40 mounting hardware. * Junction Shells come in a variety of sizes and shapes including right-angle and low profile. They are generally of one-piece construction with an adjustable clamp, but there is no shielding. * Hoods have an improved appearance versus junction shells but no shielding. They are all-plastic and come in right-angle or straight configurations. * Hardware, in the form of adjustable grommets or strain relief clamps and 4-40 screws, is generally supplied with the product; however, a variety of optional hardware is also available in the accessories section of this catalog. Call Toll Free: 1 (800) 323-9612 4-80 D-subminiature Backshells/Junction Shells/Hoods Accessories The following is a summary of the various backshells, junction shells, and hoods that Cinch offers: Backshells Type Material Series 2-Piece Plastic DPH Shell Sizes* EABC Cable Exit 180 Fits Connector Series marked with "*": D*A Series * HTD Series * D*U Series * Series 3 * T Series Metal Shell * T Series All-Plastic Basic D * Series 1 * 2-Piece 2-Piece Metallized Diecast DCH DMH EABCD EABCD 180 180 * * * * * * * * * * 2-Piece Diecast Ethernet Black Plastic Gray Plastic SDH - B SDH - G A EABC EABC 90/180 Super-D Connection System 90/180 * * * * * * * * 90/180 * * * * * * * * * Junction Shells/Hoods Junction Shells Straight Round Clamp Clamp Metal Metal Type Material Hoods Rt. Angle Deep Straight Switching Clamp Metal Clamp Metal Shell Sizes* ABCD ABCD EABCD EABCD Cable Exit 180 180 90 180 Fits Connector Series marked with "*": D*A Series * * * * D*U Series * * * * Series 3 * * * * T Series Metal Shell * * * * T Series All-Plastic Basic D Series * * * * Series 1 * * * * Shell Metal Phenolic Straight Rt. Angle Plastic Plastic Plastic ABCD AB EAB AB 180 180 180 90 * * * * * * * * * * * * * * * * * * * * * * * * *Conversion Chart between Standard Density Connectors and HPD/HTD Series 1.5 Density Connectors Shell Size E A B C D Standard D-sub 9 15 25 37 50 1.5 D-Sub HTD 15 26 44 62 N/A 4-81 Call Toll Free: 1 (800) 323-9612 D-subminiature Backshells - Two-Piece D*H Series * * * * * * * Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature plugs and sockets as well as HTD Series 1.5 D-subs. Ethernet hoods are available in diecast 15 position versions only with both 90 and 180 cable entry. Included in all backshells: - Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket. - Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs. Backshells are individually bagged. Note that slide locks may not be used with these backshells. Optional thumbscrew for backshell must be ordered separately if required. Materials * * * 4-40 screws, hex nuts, mounting bracket: Steel with zinc plating and clear chromate coating. Standard Backshells: - Plastic Backshells: ABS (black), hardware - steel with zinc plating, grommets - polyphenylene, (black). - Metallized Plastic Backshells: ABS with nickel over copper plating, hardware - steel with zinc plating, grommets - PVC (black). - Diecast Backshells: Diecast zinc, grommets - PVC (black). Ethernet Backshells: Diecast zinc, grommets - PVC (black). 4 Plastic Metallized Ethernet Straight Call Toll Free: 1 (800) 323-9612 Diecast Ethernet Right-Angle 4-82 D-subminiature Backshells - Two-Piece D*H Series Straight (180) Standard Backshells Plastic and Metallized Plastic Backshells Dimensions Shell Size E A B C D A in 1.225 1.540 2.090 2.730 2.645 B mm 31.12 39.12 53.09 69.34 67.18 in 1.547 1.516 1.655 1.830 1.855 mm 39.29 38.51 42.04 46.48 41.12 C in 0.640 0.640 0.710 0.906 0.940 D mm 16.26 16.26 18.03 23.01 23.88 4-83 in 0.645 0.645 0.645 0.645 0.750 mm 16.38 16.38 16.38 16.38 19.05 E in mm 0.400 10.16 0.400 10.16 0.522 13.26 0.725 18.42 0.725 18.42 F in 0.984 1.312 1.857 2.500 2.406 mm 24.99 33.32 47.17 63.50 61.11 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Backshells - Two-Piece D*H Series EMI/RFI Shielded Diecast Backshells 4 Dimensions Shell Size in A mm in B mm C E A B C D 1.225 1.540 2.090 2.730 2.624 31.12 39.12 53.09 69.34 66.65 1.465 1.600 1.570 1.810 1.800 37.21 40.64 39.88 45.97 45.72 in 0.620 0.620 0.690 0.862 0.862 D E F mm in mm in mm in mm 15.75 15.75 17.53 21.89 21.89 0.620 0.620 0.620 0.620 0.730 15.75 15.75 15.75 15.75 18.54 0.400 0.400 0.525 0.725 0.725 10.16 10.16 13.34 18.42 18.42 0.984 1.312 1.857 2.500 2.406 24.99 33.32 47.17 63.50 61.11 Ordering Information D*H Two-Piece Backshells Fits Shell Standard Size Density Fits HTD 1.5 Density Cable Entry Style Plastic Cable Dia. (in) Metallized Plastic Cable Dia. (in) Diecast Metal Cable Dia. (in) E 9 15 Straight (180) DPH-E-001 .210-.320 DCH-E-001 .210-.350 DMH-E-001 .210-.320 A 15 26 Straight (180) DPH-A-001 .210-.320 DCH-A-001 .210-.350 DMH-A-001 .210-.320 B 25 44 Straight (180) DPH-B-001 .230-.450 DCH-B-001 .230-.450 DMH-B-001 .230-.450 C 37 62 Straight (180) DPH-C-001 .350-.650 DCH-C-001 .350-.640 DMH-C-001 .350-.650 D 50 N/A Straight (180) DPH-D-001 .350-.650 DCH-D-001 .350-.640 DMH-D-001 .350-.640 Call Toll Free: 1 (800) 323-9612 4-84 D-subminiature Backshells - Two-Piece D*H Series Straight (180) Diecast Ethernet Backshells Right-Angle (90) Diecast Ethernet Backshells 4 Ordering Information D*H Ethernet Diecast Backshells Fits Shell Size A A Fits Standard Cable Cable Entry Density Diameter (in) Style 15 .210-.320 Straight (180) DMH-A-001XL 15 .210-.320 Rt. Angle (90) DMH-A-901X A in mm 1.550 39.37 1.550 39.37 B in mm 1.880 47.75 1.880 47.75 C in mm 0.710 18.03 0.710 18.03 D in mm 0.64 16.26 0.64 16.26 E in mm 0.522 13.26 0.522 13.26 F in mm 1.312 33.32 1.312 33.32 THUMBSCREWS (OPTIONAL) FOR D*H BACKSHELLS Order #4-40-THMB-1 (two each required per backshell). (Will not work with ethernet type backshells) 4-85 Call Toll Free: 1 (800) 323-9612 MATERIALS FEATURES D-subminiature Backshells - Super D SDH Series The Cinch Super D Interconnection System is a simple, fast, economical, and reliable way for mating connectors from cable to cable or cable to panel. Snap-on Super D plastic hoods captivate connectors providing positive, self-latching, audible mating with reliable retention and Latch-N-Lock quick release disconnect. Snap-on Super-D plastic hoods are also available with filler ends to utilize 4-40 mounting hardware. Super D hoods are available: - Straight (180) or Right-Angle (90) cable entry. - Sizes: 9, 15, 25, and 37. - Sizes 15, 25, and 37 are available in standard or large cable openings. Black SDH backshells accommodate any standard metal shell IDC, solder cup, or crimp and poke D-subminiature connector. Gray SDH backshells accommodate the Cinch All-Plastic IDC T-Series connector on pages 4-38 thru 4-39. Each Super-D plastic hood includes a stay band to strain relief the cable wire. Stay band tool SD-MSBT is required. Extra stay bands are available on page 4-90. Hood: Modified phenylene oxide - black for metal shell connectors or gray for all-plastic IDC connectors Latch Block: Diecast zinc Screws for Latching Blocks: Steel with nickel plating Stay Band: Steel with zinc plating and clear chromate finish Call Toll Free: 1 (800) 323-9612 4-86 D-subminiature Backshells - For use with Metal Shell Connectors SDH Series Straight (180) Cable Entry Black Backshells for Metal Shell Connectors Adapter Hood with Latches Adapter Hood with Filler Ends Right-Angle (90) Cable Entry Black Backshells for Metal Shell Connectors Right-Angle Adapter Hood 4 Dimensions Positions 9 15 25 37 A + .020" in 1.47 1.80 2.35 2.99 (.58mm) mm 37.34 45.72 59.69 75.95 B +.020" in .31 .31 .33 .37 (.58mm) mm 7.87 7.87 8.40 9.40 C +.020" (.58mm) in mm .41 10.41 .47 11.94 .50 12.70 4-87 D +.020" in 1.94 2.25 2.94 3.59 (.58mm) mm 49.21 57.15 74.61 91.28 E+.020" in 1.25 1.34 1.50 1.53 (.58mm) mm 31.75 34.13 38.10 38.89 Call Toll Free: 1 (800) 323-9612 D-subminiature Backshells - For use with Metal Shell Connectors SDH Series Ordering Information Straight (180) Cable Entry Black Backshells for Metal Shell Connectors Latches Standard Large Positions Cable Opening Cable Opening 9 SDH-9BL N/A 15 SDH-15BL SDH-15BLL 25 SDH-25BL SDH-25BLL 37 SDH-37BL SDH-37BLL Filler Ends Standard Large Cable Opening Cable Opening SDH-9BF N/A SDH-15BF SDH-15BFL SDH-25BF SDH-25BFL SDH-37BF SDH-37BFL Filler Ends w/4-40 Screws Standard Large Cable Opening Cable Opening SDH-9BFCS N/A SDH-15BFCS SDH-15BFLCS SDH-25BFCS SDH-25BFLCS SDH-37BFCS SDH-37BFLCS Right-Angle (90) Cable Entry Black Backshells for Metal Shell Connectors Ordering Information 4 Standard Cable Positions Opening 9 SDH-9RBL 15 SDH-15RBL 25 SDH-25RBL 37 SDH-37RBL Latches Large Cable Opening N/A SDH-15RBLL SDH-25RBLL SDH-37RBLL Latching Blocks for Super D Adapter System Ordering Information Description Latching Block Latching Block with SEM Screws Removable Mounting Screws for Adapter Hood Latching Block with SEM Screws Latching Block with SEM Screws For Panel Thickness N/A Up to .060" Qty per pack 1 each 2 each N/A .060" to .080" .080" to .125" Call Toll Free: 1 (800) 323-9612 1 each 2 each 2 each 4-88 Qty Required Per SDH Hood 2 each 2 each 2 each 2 each 2 each Catalog Number SD-LB SD-LB-060 4-40UNC2AX3/4 SD-LB-060-080 SD-LB-125 D-subminiature Backshells - Gray with All-Plastic Connectors SDH Series * Fits only T Series All-Plastic IDC connector on pages 4-38 thru 4-39. Straight (180) Cable Entry Gray Backshells for All-Plastic Connectors Dimensions Positions 9 15 25 37 A +.020" (.58mm) in mm 1.47 37.34 1.80 45.72 2.35 59.69 2.99 75.95 B +.020" in .31 .31 .33 .37 (.58mm) mm 7.87 7.87 8.40 9.40 C +.020" (.58mm) in mm ----.41 10.41 .47 11.94 .50 12.70 4 Ordering Information Straight (180) Cable Entry Gray Backshells for All-Plastic Connectors Latches Standard Large Positions Cable Opening Cable Opening 9 15 25 37 SDH-9GL SDH-15GL SDH-25GL SDH-37GL N/A SDH-15GLL SDH-25GLL SDH-37GLL Filler Ends Standard Large Cable Opening Cable Opening SDH-9GF SDH-15GF SDH-25GF SDH-37GF 4-89 N/A SDH-15GFL SDH-25GFL SDH-37GFL Filler Ends w/4-40 Screws Standard Large Cable Opening Cable Opening SDH-9GFCS SDH-15GFCS SDH-25GFCS SDH-37GFCS N/A SDH-15GFLCS SDH-25GFLCS SDH-37GFLCS Call Toll Free: 1 (800) 323-9612 D-subminiature Backshells - Gray use with All-Plastic Connectors SDH Series Right-Angle (90) Cable Entry Gray Backshells for All-Plastic Connectors * Fits only IDC connectors on pages 4-38 thru 4-39. Dimensions Positions 9 15 25 37 A +.020" (.58mm) in mm 1.94 49.21 2.25 57.15 2.94 74.61 3.59 91.28 B +.020" in .31 .31 .33 .37 (.58mm) mm 7.87 7.87 8.40 9.40 C +.020" (.58mm) in mm ---.41 10.41 .47 11.94 .50 12.70 D +.020" in 1.25 1.34 1.50 1.53 Ordering Information 4 Right-Angle (90) Cable Entry Gray Backshells for All-Plastic Connectors Standard Cable Positions Opening 9 SDH-9RGL 15 SDH-15RGL 25 SDH-25RGL 37 SDH-37RGL Latches Large Cable Opening N/A SDH-15RGLL SDH-25RGLL SDH-37RGLL Ordering Information Accessories for Gray Backshells Positions 9 15 25 37 Optional Additional Strain Reliefs* Stay Bands** SD-WC9 SD-9-15-SB SD-WC15 SD-9-15-SB SD-WC25 SD-25-37-SB SD-WC37 SD-25-37-SB * Two each required per backshell. ** Stay band tool #SD-MSBT required. See page 4-100.. Screw for screwlocking connector assembly - (2 each required): 4-40UNC2AX3/4. See page 4-85 for latch block drawing. Call Toll Free: 1 (800) 323-9612 4-90 (.58mm) mm 31.75 34.13 38.10 38.89 MATERIALS D-subminiature Junction Shells Shell Material: Zinc-plated low carbon steel with yellow chromate finish. Clamp: Zinc-plated steel with yellow chromate finish. Screw: Zinc-plated steel with yellow chromate finish. Stop Nut: Zinc-plated brass with yellow chromate finish. Straight Clamp E Shell Size A B C D A Positions in 15 1.531 25 2.078 37 2.718 50 2.625 B mm 38.89 52.78 69.04 66.68 in .500 .500 .500 .609 mm 38.89 52.78 in .500 .500 mm 30.56 38.89 52.78 69.04 66.68 in 0.718 0.718 0.968 1.187 1.250 C mm 12.70 12.70 12.70 15.47 in 1.312 1.852 2.500 2.406 mm 12.70 12.70 in 1.312 1.852 mm 18.24 18.24 24.59 30.15 31.75 in .984 1.312 1.852 2.500 2.406 mm 33.32 47.04 63.50 61.11 E in .296 .296 .296 .390 mm 7.52 7.52 7.52 9.91 F in mm .312 7.92 .796 20.22 .687 17.45 .687 17.45 in .640 .640 .640 .703 G mm 10.31 15.06 E in mm .984 23.72 1.515 38.48 in .125 .187 mm 16.26 16.26 16.26 17.86 Round Clamp Shell Size A B A Positions in 15 1.531 25 2.078 B C mm 33.32 47.04 D in .406 .593 F mm 3.18 4.75 G in mm 1.031 26.19 1.062 26.97 Right-Angle Clamp Shell Size E A B C D A Positions in 9 1.203 15 1.531 25 2.078 37 2.718 50 2.625 B Call Toll Free: 1 (800) 323-9612 C mm 24.99 33.32 47.04 63.50 61.11 4-92 E in .437 .437 .437 .437 .562 F mm 11.10 11.10 11.10 11.10 14.27 in .437 .437 .625 .812 .906 G mm 11.10 11.10 15.88 20.62 23.01 in .468 .468 .468 .468 .531 H mm 11.89 11.89 11.89 11.89 13.49 in .281 .281 .281 .281 .343 mm 7.14 7.14 7.14 7.14 8.71 D-subminiature Junction Shells Deep Straight Clamp F .015 Shell Size E A B C D A Positions 9 15 25 37 50 in 1.203 1.531 2.078 2.718 2.625 B mm 30.56 38.89 52.78 69.04 66.68 in .484 .484 .484 .484 .593 mm 12.29 12.29 12.29 12.29 15.06 C in 0.984 1.312 1.852 2.500 2.406 mm 24.99 33.32 47.04 63.50 61.11 in .578 .578 .578 .578 .687 D mm 14.68 14.68 14.68 14.68 17.45 E in .375 .713 1.000 1.375 1.406 mm 9.53 18.11 25.40 34.93 35.71 F in .375 .312 .312 .312 .406 G mm 9.53 7.92 7.92 7.92 10.31 in .750 .750 1.000 1.000 1.125 H mm 19.05 19.05 25.40 25.40 28.58 in 1.219 1.250 1.531 1.531 1.656 mm 30.96 31.75 38.89 38.89 42.06 Switching Shell Shell Size A B C D A Positions 15 25 37 50 in 1.531 2.078 2.718 2.625 mm 38.89 52.78 69.04 66.68 B in .500 .500 .500 .609 C mm 12.70 12.70 12.70 15.47 in 1.312 1.852 2.500 2.406 mm 33.32 47.04 63.50 61.11 Ordering Information Junction Shells - Metal Shell Size E A B C D Fits Standard Density 9 15 25 37 50 Straight Clamp N/A DA-19678-1 DB-19678-2 DC-19678-3 DD-19678-4 Round Clamp N/A DA-20961 DB-20962 N/A N/A Right-Angle Clamp DE-19977-5 DA-19977-1 DB-19977-2 DC-19977-3 DD-19977-4 4-93 Deep Straight Clamp DE-24657 DA-24658 DB-24659 DC-24660 DD-24661 Switching Shell N/A DA-19678-6 DB-19678-7 DC-19678-8 DD-19678-9 Call Toll Free: 1 (800) 323-9612 D-subminiature Plastic Hoods Phenolic Hood Shell Material: Phenolic (black). #4-40 Screws: Steel with nickel plating. Shell Size A B A Positions in 15 1.297 25 1.406 B mm 32.94 35.71 in 1.219 1.797 C mm 30.96 45.64 in .266 .328 D mm 6.76 8.33 in 1.312 1.852 mm 33.32 47.04 E in mm 1.641 41.68 2.203 55.96 All-Plastic Straight (180) Hood Shell Material: Nylon (gray). #4-40 Screws: Steel with nickel plating. Connector Not Included Shell Size E A B A Positions in 9 1.218 15 1.546 25 2.093 B mm 30.94 38.27 53.16 in 1.000 1.000 1.250 C mm 25.40 25.40 31.75 in .984 1.312 1.852 D mm 23.72 33.32 47.04 in .500 .500 .500 mm 12.70 12.70 12.70 E in mm .562 14.27 .562 14.27 .562 14.27 in .281 .360 .493 F E in mm .562 14.28 .562 14.28 in .360 .360 mm 7.14 9.14 12.52 All-Plastic Right-Angle (90) Hood Shell Material: Nylon (gray). #4-40 Screws: Steel with nickel plating. Connector Not Included Shell Size A B A Positions in 15 1.822 25 2.368 B mm 46.28 60.15 in 1.000 1.250 C mm 25.40 31.75 in 1.312 1.852 D mm 33.32 47.04 in .500 .500 Ordering Information Plastic Hoods Shell Size E A B C D Standard Density 9 15 25 37 50 Phenolic Hood N/A DA-51225-1 DB-51226-1A N/A N/A Call Toll Free: 1 (800) 323-9612 Straight Hood DE-51218-1 DA-51210-1 DB-51212-1 N/A N/A Right Angle N/A DA-51211-1 DB-51213-1 N/A N/A 4-94 mm 12.70 12.70 F mm 9.14 9.14 in .218 .360 .360 G mm 7.14 9.14 9.14 D-subminiature Accessories Dust Caps * * * For use with all Cinch D-subminiature connectors. Used to protect connector contacts when connector is not mated. Made of polyethylene (black). Ordering Information Fits Shell Size E E A A B B C C D D Fits Standard Density Catalog No. Description 9 DE-59-20 Socket 9 DE-60-20 Plug 15 DA-59-20 Socket 15 DA-60-20 Plug 25 DB-59-20 Socket 25 DB-60-20 Plug 37 DC-59-20 Socket 37 DC-60-20 Plug 50 DD-59-20 Socket 50 DD-60-20 Plug A in .694 .749 1.022 1.077 1.562 1.635 2.210 2.283 2.116 2.179 B mm 17.63 19.02 25.95 27.36 39.67 41.52 56.13 57.99 53.75 55.35 in .627 .682 .955 1.010 1.495 1.568 2.143 2.216 2.049 2.112 C mm 15.93 17.32 24.25 25.65 37.97 39.83 54.43 56.29 52.04 53.64 in .362 .412 .362 .412 .362 .430 .362 .430 .474 .536 D in mm .295 7.49 .345 8.76 .295 7.49 .345 8.76 .295 7.49 .363 9.22 .295 7.49 .363 9.22 .407 10.34 .469 11.91 mm 9.19 10.46 9.19 10.46 9.19 10.92 9.19 10.92 12.04 13.61 Guide Pin Plates * Aligns connectors before actual mating. Generally used in blind mate applications. * * * * Male or female guide plates will accommodate Cinch male or female connectors. Plate: Cold-rolled steel with cadmium plating and yellow chromate finish. Guide pin (male): Stainless steel, passivated. Screws, rivets (male plate), washers (male plate): Steel with cadmium plating and yellow chromate finish. Socket Plug Ordering Information Fits Shell Standard Size Density A Plug Socket N/A N/A in mm in B mm C in D mm in F mm in mm in G mm K in mm E 9 A 15 DA-22213 DA-22214 2.281 57.93 1.000 25.40 1.312 33.32 .750 19.05 .898 22.81 1.663 42.24 1.906 48.41 B 25 DB-22255 DB-22254 2.820 71.63 1.000 25.40 1.852 47.04 .750 19.05 1.168 29.67 2.203 55.96 2.446 62.13 C 37 DC-22070 DC-22071 3.468 88.09 1.000 25.40 2.500 63.50 .750 19.05 1.492 37.90 2.851 72.42 3.094 78.59 D 50 DD-21962 DD-21961 3.375 85.73 1.125 28.58 2.406 61.112 .874 21.88 1.437 36.50 2.749 69.82 3.000 76.20 Call Toll Free: 1 (800) 323-9612 4-96 D-subminiature Accessories Slide Lock Assemblies * A slide lock assembly is a metal bracket offered with hardware necessary to mount into the standard connector mounting holes. It consists of the lock retainer plate, two screws, two washers, and two nuts. Two lock posts are required to fit into the mounting holes of the mating connector. These must be ordered separately. * Compatible with all Cinch Backshells, Hoods, and Junction Shells except D*H Series, SDH Series, and phenolic hood. * Compatible with all Cinch metal shell D-subminiature connectors. Materials * Slide Lock Plate: Stainless steel, passivated. * * Slide lock hex nut, washer #4-40 screw: Steel with zinc plating and yellow chromate finish. Lockpost, washer, lockwasher, and hex nut: Steel with zinc plating and yellow chromate finish. .145 Consists of Lock Retainer and two lock posts (order separately). NOTE: Not compatible with D*H Series or SDH Series backshells. Ordering Information Shell Size E A B C D Fits Standard Density 9 15 25 37 50 Lock Retainer DE-51224-1 DA-51220-1 DB-51221-1 DC-51222-1 DD-51223-1 A in 1.442 1.770 2.293 2.958 2.847 B mm 36.63 44.96 58.24 75.13 72.31 in .500 .500 .500 .500 .609 C mm 12.70 12.70 12.70 12.70 15.47 in 0.984 1.312 1.852 2.500 2.406 mm 24.99 33.27 47.04 63.50 62.48 Lock Post: #D53018. Two (2) required with each Slide Lock Assembly. 4-97 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Hardware Accessories Screwlocks * * * * * Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/panel. Screwlocks may be used on plugs or sockets. Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate different panel thicknesses, one lockwasher, and one #4-40 nut. Military female screwlocks include three flat washers. Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the various connector flange sizes and types of backshells or hoods (if applicable). Two screwlocks are required per connector. Military screwlocks meet all requirements of MIL-C-24308. Materials Commercial Screwlock Assemblies: * Male Screwlock Assembly: Clip and screw are steel with zinc plating and yellow chromate finish. * Female Screwlock Assembly: Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating and yellow chromate finish. M24308 Military Screwlock Assemblies: * Male Screwlock Assembly: Clip and screw are steel with cadmium plating and yellow chromate finish. * Female Screwlock Assembly: Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and yellow chromate finish. 4 Female Screwlock Call Toll Free: 1 (800) 323-9612 Male Screwlock 4-98 D-subminiature Accessories * Screwlock assemblies will not fit D*H or SDH Series backshells. Male Screwlocks Ordering Information Shell Size Positions Commercial: D20419-0 D20419-16 D20419-21 D20420-0 D20420-12 D20420-15 A B in mm in mm 0.250 0.250 0.281 0.250 0.281 0.281 56.35 56.35 63.34 56.35 63.34 63.34 0.033 0.048 0.059 0.033 0.048 0.059 0.84 1.22 1.50 0.84 1.22 1.50 Military MIL-C-24308: M24308/25-9F Per MIL spec M24308/25-10F Per MIL spec E 9 A 15 B 25 C 37 P/S S* P/S S* P* S P/S* P* S P/S* D 50 S P/S* P* P/S P/S P/S P/S P/S NOTE: P = Plug, S= Socket * Indicates use with junction shell Female Screwlocks Ordering Information Shell Size Positions in A E 9 A 15 B 25 C 37 D 50 P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S mm Commercial: D20418-2 D20418-39 0.312 0.628 Military MIL-C-24308: M24308/26-1F M24308/26-2F Per MIL spec Per MIL spec 70.32 141.55 NOTE: P = Plug, S= Socket 4-99 Call Toll Free: 1 (800) 323-9612 4